History

Ryan 41bd4e35a0 Clean up RGB LED type (#21859 )		2023-09-04 01:19:59 +01:00
..
keymaps	Clean up RGB LED type (#21859 )	2023-09-04 01:19:59 +01:00
rev1	Move `RGBLED_NUM` to data driven (#21278 )	2023-06-18 14:39:07 +10:00
rev2	Move `RGBLED_NUM` to data driven (#21278 )	2023-06-18 14:39:07 +10:00
rev3	Move `RGBLED_NUM` to data driven (#21278 )	2023-06-18 14:39:07 +10:00
info.json	Move ortho & numpad layouts to data driven (#20183 )	2023-03-29 15:54:34 +11:00
levinson.c	Remove useless "ifdef KEYBOARD_*" (#20078 )	2023-03-16 20:18:33 +11:00
readme.md	…
rules.mk	…

readme.md

Levinson

A split 40% split 4x12 ortholinear keyboard made and sold by Keebio. It's essentially a Let's Split with LED backlight support and 2u thumb key support. More info at Keebio.

Keyboard Maintainer: Bakingpy/nooges
Hardware Supported: Pro Micro, Elite-C
Hardware Availability: Keebio

Make example for this keyboard (after setting up your build environment):

make keebio/levinson/rev3:default

Example of flashing this keyboard with Pro micro:

make keebio/levinson/rev3:default:avrdude

Example of flashing this keyboard with Elite-C:

You'll need to add BOOTLOADER = atmel-dfu to your rules.mk to ensure that resetting the board works properly.

Hold the reset button on the Elite-C board, or the reset button on the keyboard if already assembled, then release the button and run:

make keebio/levinson/rev3:default:dfu

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

A build guide for this keyboard can be found here: Levinson Build Guide