* Initial commit
* testing modes
* working on puckbuddy firmware. This is all working for now but need to clean it up and personalize it.
* needs to be updated from vial build
* prepping for PR
* added rgb mode cycling to fn1 since it isn't on the encoder for these maps
* readme written in preparation for pr
* reverting driver print line
* Removed old reference to OBE in the readme from copypaste error
* applying changes based on review
* applying changes from review
* Update keyboards/mechwild/puckbuddy/puckbuddy.c
* trailing whitespaces removed
* added clear screen condition for switching back to name rendering
* Added uf2 keymap and fixed display glitch for the logo render art.
* Removed extra definition of FEE_PAGE_BASE_ADDRESS
* Removed the uf2 keymap and made it automatic when selecting bootloader instead
* Fixed the bad bootloader check
* moved the uf2 check from rules.mk to post_rules.mk to satisfy lint
* changing it back to stm32-dfu bootloader default
* Fixed RGBLIGHT enable oversight.
* Added persistent dynamic tapping configuration for the cirque touchpad tap term
* new lines at end of files for formatting and diff sanity
* changing default bootloader back to stm32-dfu
* Had to completely redefine the tap keycodes instead of using the DT_UP and DT_DOWN keycodes because I was not able to specify them easily in the via/vial configs and this allows me to keep the original functionality instead of tying it to eeprom like these are.
* Added tap toggling keycodes to quick enable and disable the tapping term
* working out an issue where the tap status keeps turning to off on power cycle
* correcting submodule garbo
* Fixed display issue and rewrote TAP config approach to make it a little easier to control
* removing backup puckbuddy.c code
* Added some comment, removed some commented out old code, removed trailing whitespace
* Changed to handle tinyuf2 by expecting emulated eeprom so that adding other forms of eeprom can be handled for the memory offset separately, and added user oled conditional inside the keyboard oled code block
* Updated default keymaps to have the tap and dpi keys on by default
* Apply suggestions from code review
* Apply suggestions from code review
* allowing the kt60 file to be modified so I can do things while waiting for it to be fixed upstream
* initial commit for mokulua keyboard
* Split the board into mirrored and standard layouts.
* Prepping for PR. Silly keymap added.
* prepped for PR
* Apply suggestions from code review
* Fixing firmware from the refactor that removed the mirrored layout.
* Small tweaks using changes from refactor
* Changed the name of the layouts back to match the original to resolve conflict in info.json
* these files needed to be removed as well, they were added as a part of the refactor
* info.json moveds to be different for each build
* Another file had to be removed and the mirrored.c file changed to call mirrored.h instead of standard.h
* fixing chibios ver
* force deleting to revert
* fixing chibios shit
* Update keyboards/mechwild/mokulua/mirrored/mirrored.c
* Update keyboards/mechwild/mokulua/standard/standard.c
* Removing tabs and replacing with 4 spaces. Small style and formatting changes.
* allowing the kt60 file to be modified so I can do things while waiting for it to be fixed upstream
* Initial commit
* testing modes
* working on puckbuddy firmware. This is all working for now but need to clean it up and personalize it.
* needs to be updated from vial build
* prepping for PR
* added rgb mode cycling to fn1 since it isn't on the encoder for these maps
* shipping firmware built. Need to clean up readme and info.json layout
* removing puckbuddy files from this branch
* readme done, prepping for PR
* info.json updated prepping for PR
* Restore cirque driver that was modified from puckbuddy testing on this branch
* applying changes from review
* Update keyboards/mechwild/bbs/bbs.c
* Fixed info.json
* Apply suggestions from code review
* disambiguate Bootmagic rules in keymaps
The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic.
This commit edits the files to specify that full Bootmagic is intended.
* remove BOOTMAGIC_ENABLE=full setting
* unify commented BOOTMAGIC_ENABLE rules in keyboards
Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no # Virtual DIP switch configuration;g' {} +
```
* remove commented Bootmagic rules from keymap/user level
Command:
```
find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} +
```
* update keyboard BOOTMAGIC_ENABLE rule formatting
Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later).
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
```
* update keyboards' BOOTMAGIC_ENABLE settings
Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' +
```
* update keymap/user BOOTMAGIC_ENABLE settings
Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.
Commands:
```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
```
* remove and replace inline comments in keyboards and keymap/user files
Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`.
Commands:
```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1 # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1 # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1 # Enable Bootmagic Lite;g' '{}' +
```
* rename improperly named makefiles
Some files intended to be used as makefiles had improper names causing them to not be used as intended when building.
This commit corrects the filenames of the affected files.
* update renamed file with new rule formatting
* update QMK's template files
Updates QMK's `rules.mk` templates to use the new inline comment.
* update QMK Docs
- remove documentation of full Bootmagic
- update links to Bootmagic Lite doc
- add doc for Magic Keycodes
* rules.mk patch for coarse/ixora and coarse/vinta
Ryan
Joel Challis
Kyle McCreery
Less/Rikki
James Young
jonavin
Zykrah
Ryan Skidmore
QMK Bot
Stephon Parker
jack
FearlessSpiff
Drashna Jaelre
Xelus22