* Don't make EEPROM size assumptions with dynamic keymaps.
* Add support for checking against emulated flash, error out if someone attempts to build a board without specifying EEPROM size.
* Reorder defines so that MCU is considered last.
* Refactor EEPROM definitions for simplicity.
* Fix max sizing of kabedon/kabedon980.
* Fix max sizing of mechlovin/olly/jf.
* Fix unit tests.
* Review comments, add messages with values during build failures.
* move layout macro alias to info.json
* info.json: fix layout macro reference
* info.json: fix layout data
Original layout data was generated with rotation, which breaks the rendering.
* info.json: remove layout macro alias
It's not used anywhere, so no need to keep it.
* rules.mk: enable Community Layout support
* move ISO Enter argument to home row
Moves the ISO Enter key's argument to the home row to conform to QMK's standard for traditionally-staggered boards.
* update info.json data
* fix keymap alignment
Both the `default` and `via` keymaps had misalignments on the top 3 layers, which was misleading as to which keycode was on which switch on those layers.
* fix layout macro reference in info.json
* friendly-format info.json, phase 1
Adds line breaks between keyboard rows.
* correct info.json key sequence
* bb.h: use XXX for KC_NO
* bb.h: add matrix diagram
* add LAYOUT_ansi_split_bs
Includes reference keymap.
* add LAYOUT_iso_split_bs
Includes reference keymap.
* info.json: remove meta key
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Wolf Van Herreweghe <wolfvh@getupgamesofficial.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Wolf Van Herreweghe <wolfvh@getupgamesofficial.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Wolf Van Herreweghe <wolfvh@getupgamesofficial.com>
* info.json: apply/polish friendly formatting
* refactor LAYOUT_all macro
- move the argument/keycode for the right half of split Backspace next to the left half
- update QMK Configurator layout data
* update QMK Configurator layout data for the other macros
Moves the EncoderClick objects up, and offsets the arrow keys down 0.25u.
* rename LAYOUT_all to LAYOUT_75_ansi_rwkl
The only supported layout is 75% ANSI, with two modifier keys on the right of the Spacebar instead of three.
* info.json: use maintainer's GitHub username
* info.json: apply friendly formatting
* ck65.h: use QMK 3-character notation
* move Enter keycode/argument to home row
This commit makes the `LAYOUT` macro conformant to `LAYOUT_65_iso` in QMK.
* rename LAYOUT to LAYOUT_65_iso
* use QMK-native KC_TRNS alias in keymaps
Replaces instances of `KC_TRNS` with `_______` in keymaps.
* info.json: update maintainer field
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Initial M75H support
* Remove BSLS key
* Add M75S initial support
* Define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR to allow VIA
* Add layer 1 for M75H
* Add layer 1 for M75H
* Fix layouts
* Add BOOTLOADER and remove BOOTLOADER address from rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* fixed ledmap: missing key, missing/wrong flags
* Update keyboards/kprepublic/bm65hsrgb_iso/bm65hsrgb_iso.c
Co-authored-by: Albert Y <76888457+filterpaper@users.noreply.github.com>
* corrected c&p error user name in GPL header
Co-authored-by: Albert Y <76888457+filterpaper@users.noreply.github.com>
* solder.h: add matrix diagram
* solder.h: remove unnecessary comments
* rework LAYOUT_60_iso to LAYOUT_60_isoenter_split_bs
True ISO layouts are not supported on this keyboard because the PCB lacks support for split Left Shift. Renames the `iso` to `isoenter` to specify this.
- denotes use of Split Backspace
- move Backslash keycode to home row
* info.json: remove trailing whitespace
* info.json: clean up
Sort the layout trees into the same order as `solder.h`, and remove the `LAYOUT_60_all` tree (doesn't exist in source).
* solder.h: align positional arguments
Helps me proof-read the layouts at a glance. No logic change.
* fix syntax errors in keymaps
* remove ISO layouts
As previously noted, ISO layouts are not supported due to the PCB's lack of support for split Left Shift.
* rename LAYOUT_60_ansi_tsangan_split_bs to LAYOUT_60_tsangan_hhkb
Also renames `60_tsangan_splt_bs` keymap to `60_tsangan_hhkb`.
* rename LAYOUT_60_ansi_tsangan to LAYOUT_60_ansi_tsangan_split_rshift
Also renames `60_tsangan` keymap to `60_ansi_tsangan_split_rshift`.
* rename LAYOUT_60_ansi_arrow_split_bs_7u_spc to LAYOUT_60_ansi_arrow_tsangan_split_bs
Also rename `60_ansi_arrow_splt_bs_7u` to `60_ansi_arrow_tsangan_split_bs`.
* rename LAYOUT_60_ansi_arrow_7u_spc to LAYOUT_60_ansi_arrow_tsangan
Also renames `60_ansi_arrow_7u` keymap to `60_ansi_arrow_tsangan`.
* rename keymaps based on layout macro used
Making this easier to track in my head while I work on it.
* info.json: fix syntax errors
* rename LAYOUT_60_ansi_split_bs_7u_spc to LAYOUT_60_ansi_tsangan_split_bs
- renames `60_ansi_split_bs_7u_spc` keymap to `60_ansi_tsangan_split_bs`
- removes `layout_aliases` entry from `info.json` (creates incompatible data conflict)
* rename LAYOUT_60_ansi_7u_spc to LAYOUT_60_ansi_tsangan
- renames `60_ansi_7u_spc` keymap to `60_ansi_tsangan`
* info.json: remove LAYOUT_60_ansi_tsangan layout_aliases entry
Causes an incompatible data conflict.
* add second layer to 60_ansi keymap
* update via keymap
Now matches the behaviour of the default keymap.
* fix syntax errors in keymaps, take 2
* add RGB and Navigation keycodes
Adds RGB and Navigation keycodes to the `60_isoenter_split_bs`, `default` and `via` keymaps.
* Add new keyboard keychron_q1_rev_0101 for Keychron.
* Update keymaps of keychron_q1_rev_0100 and keychron_q1_rev_0102.
* Update keyboards/keychron/q1/rev_0101/rev_0101.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keymap.c
* Add new info.json.
* Update info.json
* Update keyboards/keychron/q1/rev_0101/keymaps/default/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/keychron/q1/rev_0101/rev_0101.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/keychron/q1/rev_0101/keymaps/via/keymap.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keyboards/keychron/q1/rev_0101/rev_0101.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update keymap.c
* Update info.json
* Update all via keymaps keymaps of q1 series. KC_TASK and KC_FLXP are now defined using the VIA user keycodes range so they can be renamed "TASK" and "TILE" as a shortName in VIA.
* Add keyboards keychron_q2 series.
* Update default keymaps of keychron_q2 series.
* Update rules.mk and MCU_LDSCRIPT specified as STM32L432xB.
* Update keyboards/keychron/q1/rev_0101/rev_0101.c
Co-authored-by: Drashna Jaelre <drashna@live.com>
* Update config.h
* Update config.h
* Update config.h
* removed duplicated ifdef
* Update keyboards/keychron/q1/rev_0101/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/keychron/q2/rev_0110/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/keychron/q2/rev_0110/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/keychron/q2/rev_0113/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/keychron/q2/rev_0111/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/keychron/q2/rev_0111/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/keychron/q2/rev_0112/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/keychron/q2/rev_0112/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update keyboards/keychron/q2/rev_0113/rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
* Update rev_0101.c
* Update rev_0101.
* Enable support for edit RGB lighting in VIA.
The updated design file at https://git.io/JyE0K includes only the
enabled RGB_MATRIX modes.
* Update q1.
* Add rgb matrix support for q2 of keychron.
* Update rule.mk.
* Delete comment block which is unwanted.
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Cesar Rojas <cesar.fieoner@gmail.com>
Co-authored-by: lokher <lokher@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Adam Karim <adam@akarsoft.com>
* keyhive sofle rgb: fix configuration.
* Add Colemak-DH and cycle layer keycode.
* Fix indentation.
* Add PLACEHOLDER for better readability.
* Fix breaking changes.
* Just one colemak.
* PR Cleanup
* Use NO_PIN definition instead of C7
* Define animations individually
* Remove via json file and update documentation
* Reduce LED brightness, one of the animations caused a crash
* More PR feedback.
* Better credit.
* Disable NKRO.
* Cleanup RGB configuration.
* animations defined in keymap.
* Update keyboards/sofle/keyhive/readme.md
* PR Feedback.
* Update phrasing from template.
* Disable RGBLIGHT_ENABLE in keymap for better compatibility with default keymap.
* Set a default animation.
* Use default in keyboard readme.
* Update keyboards/sofle/keyhive/info.json
* Move via specific layout into via keymap.
* WIP: virgo keyboard
* Finish layout
* Enable debugging and format
* Debug keypresses
* Add function layer
* Fix whitespace
* Fix some more whitespace
* Add Jeremy's map
* Add left split ortho 2U board
* Enabled extrakeys for volume & media control
* More work on split ortho 2U...
...but still not complete
* Finish default layout
* Fix many issues by renaming the keyboard
* Add right half as a keyboard
* Update config for right side
* WIP: Add split ortho 2U board
* WIP: Correct rules & config
* More work on split ortho
* More work on split ortho 2u
* Nearing completion on split ortho
* Remove left and right separate keyboards.
Split ortho 2U is complete and they are not needed.
* Add uglydense keyboard
* Rename directory for uglydense
* Swap right Fn and right ctrl keys
* Add jeremy's layout
* Add ian layout
* Add reset key, which is very useful for flashing.
* Add Levi's layout
* Update Levi's layout
* Fix Levi's Layout
* Fix Levi's layout again
* Add a README with some basic information
* Add keymap customization info to uglydense readme
* Make the readme make a little more sense.
* Make John a layout with left fn and left super swapped
* Update John's layout
* Add Carl's layout
* Add Sean's layout
* Add reset keys to all layouts
* Swap LALT & LGUI on default layout
* shpurk keyboard: initial commit
* Add nathaniel & shpurk layouts
* Update instructions to include necesarry dependencies
* Add Lrrr keyboard, ruler of Omicron Persei 8
* Update README for Lrrr
* Update Lrrr it uses Caterina bootloader
Also B1 wasn't working for Row 6, so I changed that to F6
* Swap RCTL & RALT
* Un-swap RCTL and RALT, making RCTL closer to right thumb
* Add printscreen to my layout
* Rename lrrr to Launch, enbiggen L-Shift to 2U
* Add layout files for Launch
* Rename launch to launch_1
* Add levi layout for ortho_split_2u
* Update carl keymap
* Add launch testboard
* Implement keyboard keycode reading using raw hid
* Enable dynamic keymap
* Add config support to launch_1
* Implement probe command, make logical key names match configurator
* Update logical key names again
* Add layout generator for keyboard configurator
* Add board name and version
* Add board name and version to test board
* Fix issues with compiling board and version commands
* Rename uglydense to launch_alpha_1 and launch_1 to launch_alpha_2
* Generate layouts for other launch prototypes
* Fix launch_alpha_1 logical names
* Add launch_beta_1
* Fix building production hex file with atmel-dfu bootloader
* Limit backlight brightness
* USB mux handling
* Allow repeat start
* Do USB MUX init before bootmagic
* Fixes for mux init
* Fix register write size for programmable function control
* Ensure bit shifts are correct
* Improve documentation
* Fix when i2c read ack condition happens
* Fix extra start in i2c_set
* Add ISP instructions
* Add fuse information
* Refactor
* Add RGB matrix support
* Fix RGB matrix
* Update Jeremy layout
* Enable audio controls
* Update Jeremy layout
* Ensure that n-key rollover is used
* Port changes to other launch boards
* Configuration values for starting HSV and speed (#7740)
* Define default HSV and speed for RGB matrix.
* Documentation for configuration values RGB_MATRIX_STARTUP_HUE, RGB_MATRIX_STARTUP_SAT and RGB_MATRIX_STARTUP_VAL.
* Document RGB_MATRIX_STARTUP_SPD.
* Preserve the ordering.
* Set default RGB mode, hue, and saturation
* Reduce AVR clock to 8MHz
* Update launch_beta_1 with new USB ID
* Update default LED mode
* Set default hue
* Disable RGB while suspended
* Add led value and color commands
* Add max value to CMD_LED_GET_VALUE
* Do not save custom mode to eeprom
* Add reset to bootloader command for Launch keyboard
* Rename launch_beta_1 to launch_1
* Enable LTO when compiling for launch_1
* Allow setting individual LED's
* Convert tabs to spaces
* Unlock on RESET keypress:
- Display unlock pattern
- Disable LED get/set functions
- Enable reset to bootloader function
* Reduce brightness of rainbow backdrop in unlock pattern
* Add hid commands for setting led matrix mode
This changes the color setting to not change the mode, and set the hue
and saturation for QMK effects.
* Fix `CMD_LED_GET_MODE`
* Add Levi's Launch layout
* Fix layer mistake in Levi's Launch layout
* Add matrix command
* Define default RGB matrix speed
* Add active_keys effect
* Move definition of RGB modes inside ifdef testing for custom RGB modes
* RGB parameters per layer
* fix: Call `system76_ec_rgb_layer` after setting mode
* Include layer 3 and 4 in default layout for launch_1
I added support for layer 3 and 4 to the Configurator, but it seems to
load bogus values.
`dynamic_keymap_reset()` has a comment saying:
```
// Reset the keymaps in EEPROM to what is in flash.
// All keyboards using dynamic keymaps should define a layout
// for the same number of layers as DYNAMIC_KEYMAP_LAYER_COUNT
```
Other keyboards seem to have default layouts that only list the first
two layers while setting `DYNAMIC_KEYMAP_LAYER_COUNT` to 4, but
whatever. This appears to make the Configurator behave as expected with
layer 3 and 4.
* Use EEPROM to store RGB parameters
* Add layer 2 and 3 to other keymaps
* Add LED_SAVE command
* Use eeprom_update_block to improve performance
* Revert "Configuration values for starting HSV and speed (#7740)"
This reverts commit de1f60fd370b4769336b8a707ee12657aee46412.
* Update launch_1 rules.mk for changes in Qmk
* WIP keycodes matching EC behavior
* Modify default layout to match design
* Apply updates to jeremy layout
* Improvements to RGB keycodes
* system76_ec: Add mode to disable layer backlight
* launch_1: Use `KC_NO` instead of `KC_TRNS` for default layout
* Revert "launch_1: Use `KC_NO` instead of `KC_TRNS` for default layout"
This reverts commit f71c5e7ac3cecbbb1a1f8934db1f329407fef041.
* Fix building bootloader
* Workaround for upstream orientation
* Custom USB IDs for USB hubs, disable USB hub feature controller
* Set USB mux orientation in a loop for one second
* Set mux orientation 100 times with 10 ms delay
* Update Jeremy's keymap
* Update Levi's Launch keymap
* Update flashing instructions and rewrite layout design instructions
* Update README.md
* Add a system76_ec command to disable input events
For testing purposes.
* Enable system76/launch_1 keyboard to work with QMK Firmware 0.15.3
- Migrate system76/launch_1 from 0.7.103:
- Explicitly enable used RGB matrix effects
- Initialize flags field of `rgb_config_t` union/struct
- Account for header and source file location changes
- Update AVR platform makefile with Atmel DFU bootloader option
- Update ATmega32U4 bootloader to latest from Microchip
- Format C sources with ClangFormat
- Format Markdown text with Prettier
* Remove System76 pre-release or test keyboards and keymaps
* Add licensing and replace guards in headers for system76/launch_1
* Remove options impact for system76/launch_1
* Revert AVR platform changes for `atmel-dfu` bootloader
* Update system76/launch_1 README
* Add system76/launch_1 information JSON file
* Replace `util/delay.h` timing abstractions in system76/launch_1
* Use I2C QMK abstractions in system76/launch_1
* Fully revert AVR platform changes for `atmel-dfu` bootloader
* Move `layouts.sh` into `keyboards/system76`
* Implement GitHub PR suggestions for system76/launch_1
* Make additional system76/launch_1 updates
* Implement minor system76/launch_1 change requests
* Add custom version of Bootmagic Lite and document fuse values for system76/launch_1
* Remove the RESET HID command from system76/launch_1
* Reorder `process_record_user` in system76/launch_1
* Add `post_rules.mk` to system76/launch_1
* Fix overlapping key in sytem76/launch_1
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: yiancar <yiancar@gmail.com>
Richard
QMK Bot
Ryan
Nick Brassel
Ivan Gromov
Andre Brait
joedinkle
Adrian Fleiszer
peepeetee
Drashna Jaelre
WiZ.GG
Ben Allen
Albert Y
takishim
XScorpion2
xerootg
James Young
Laneware
Wolf Van Herreweghe
Alin Marin Elena
Gigahawk
mmccoyd
peott-fr
Christian Grumbein
Andrew Garver
ojthetiny
Bahrul Hidayat
Felipe Bastos
Alex Grover
Joel Challis
Cable Car Designs
SandwichRising
Chris Broekema
IFo Hancroft
yiancar
Christian Sandven
Gabriel Harel
Álvaro A. Volpato
wyethGR
p4yne
Damien Guard
Tim Liu
tofurky
fOmey
Tobias Minn
HorrorTroll
dnlsmy
lalalademaxiya1
Domanic Calleja
Rifaa Subekti
Charly Delay
CMMS-Freather
npspears
moyi4681
Bartosz Nowak
Paul James
GG
Dasky
Conor Burns
Ryan Smith
Eric Gebhart
asdfire1
DA
duoshock
druotoni
Andrew Kannan
Ibnu Daru Aji
Dmitriy Kuminov
Lucas W
Reibl János Dániel
Choi Byungyoon
Karl B
Kevin Hartley
EqualzC3
onefiftynine
owlab-git
mechlovin
Will Winder
PollyV1
dlgoodr
kb-elmo
jonavin
Fredrik Larsen
Winston Durand
MakotoKurauchi
jecassis
Bailey Boylson
TerryMathews
cedrikl
Khang
Mewp
rhmokey
Alan Pocklington
Chuck Lauer Vose
LucW
Carlo Sala
Batın Eryılmaz