Commit Graph

63 Commits (092228571c40a31d88940055b4d2fa749f135314)

Author SHA1 Message Date
bwisn 7e3ff206b8
Add HT32 support to core (#14388)
* tmk_core: temporary fix to allow HT32 based keyboards to work without patched ChibiOS-contrib (AnnePro2)

* HT32: add spi support

Add persistent led support with eeprom (#9)

* adding HT32 support to chibios SPI master driver

update spi driver, fix bad merging with master

* HT32: fix formatting

HT32: Fix formatting: tmk_core/protocol/chibios/usb_main.c

Co-authored-by: Drashna Jaelre <drashna@live.com>

* HT32: Apply suggestions from fauxpark's code review

Co-authored-by: Ryan <fauxpark@gmail.com>

* HT32: update spi driver

* ht32: apply code review suggestions, remove old workaround

Co-authored-by: tech2077 <tech2077@gmail.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
2021-10-18 16:17:29 +11:00
Joel Challis 951331cd8d
Fix i2c_readReg16 (#14730) 2021-10-07 11:45:59 +11:00
Ryan bc1f5ef381
i2c_master: Add support for reading/writing to 16-bit registers (#14289) 2021-10-07 10:29:35 +11:00
Drashna Jaelre ba8f1454f4
Move Audio drivers from quantum to platform drivers folder (#14308)
* Move Audio drivers from quantum to platform drivers folder

* fix path for audio drivers

Co-authored-by: Ryan <fauxpark@gmail.com>

Co-authored-by: Ryan <fauxpark@gmail.com>
2021-10-06 12:01:45 +11:00
Drashna Jaelre 7c10d00ca6
Add RGBW support to PWM and SPI drivers for ChibiOS (#14327)
* Add RGBW support to PWM and SPI drivers for ChibiOS

* Apply suggestions from code review

Co-authored-by: Ryan <fauxpark@gmail.com>

Co-authored-by: Ryan <fauxpark@gmail.com>
2021-09-18 17:28:57 +10:00
Stefan Kerkmann efde8d657a
Use opendrain pin with external pullup again (#14474) 2021-09-17 12:12:20 +01:00
Joel Challis 84dba25533
Make ChibiOS PAL interactions less STM32 specific - Round 2 (#14456) 2021-09-16 08:18:58 +10:00
Joel Challis a78f0e8a0b
Refactor use of _STM32_ defines (#14439) 2021-09-15 11:19:51 +10:00
Joel Challis 0ca4a56a04
Refactor use of STM32_SYSCLK (#14430)
* Refactor use of STM32_SYSCLK

* clang
2021-09-14 12:18:36 +10:00
Joel Challis 0fa217a5b7
Align ChibiOS I2C defs with other drivers (#14399)
* Align ChibiOS I2C defs with other drivers

* Update keyboards/xelus/valor_frl_tkl/config.h

Co-authored-by: Ryan <fauxpark@gmail.com>

Co-authored-by: Ryan <fauxpark@gmail.com>
2021-09-12 15:41:33 +01:00
JX 5ed8edae49
Update ws2812_spi.c (#14237) 2021-08-30 20:34:19 +01:00
Joakim Tufvegren 0ae20e7457
Make solo half of split keyboards (more) usable. (#13523)
* Make solo half of split keyboards (more) usable.

Using only one half of a split keyboard (that's using the split_common
framework to communicate) is not a great experience, since several read
timeouts per scan cycle cause an unusably slow scan rate.

This change blocks all split communication attempts for 500 ms
(configurable) after an error occurs, causing the scan rate to become at
least _more_ usable, but might need some tweaking to work fully on most
keyboards. One read timeout still needs to occur after the 500 ms has
passed, and if that timeout isn't low enough, some scan cycles may still
be too slow.

* Fix lint complaint.

* Require 25 consecutive comm errors to see comms as disconnected.

The number of max errors can be overridden by defining
`SPLIT_MAX_CONNECTION_ERRORS`.

* Add comments to new defines, and ability to disable disconnection check.

Also increase `SPLIT_MAX_CONNECTION_ERRORS` to 40, since it's divisible
by most relevant numbers for the description.

* Make lint happy ...again

* Only update `connection_check_timer` when needed.

* Add new defines to split keyboard documentation.

* Move connection timeout logic to transport.c, add `is_transport_connected`.

* Use split_common disconnection logic in matrix.c.

Instead of doing more or less the same thing twice.

* Move disconnection logic to `transport_master`.

Is a cleaner implementation, and causes the scan rate while disconnected
to increase instead of decrease.

* Lint fixes.

* Lower default `SERIAL_USART_TIMEOUT` to 20 ms.

The read timeout must be low enough to not cause exessively long scan
cycles when using a solo split half. 10 ms was determined from testing
to work fine even with the slowest defined baudrate of 19200 (5 ms was
too low for that case), so 20 ms should be fine for most cases.

* Remove `SERIAL_USART_TIMEOUT` from ergodox_infinity/config.h

Was somewhat mistakenly included in an earlier PR.

* Fix building with `USE_I2C`.

* Reduce built firmware size.

Not really sure why this works, the idea was taken from tzarc's work on
split disconnection.

* Tweak and improve opt-out for split disconnection logic.

There are now two ways to opt out from this feature:
* Set `SPLIT_MAX_CONNECTION_ERRORS` to 0. This will completely disable
  the connection status checks (also affects the slave matrix reset logic in
  matrix.c, though).
* Set `SPLIT_CONNECTION_CHECK_TIMEOUT` to 0. This will only disable the
  communication throttling while disconnected. Will make the firmware
  smaller.

* Make split disconnection logic work with custom transports.

Includes a fallback implementation for keyboards using a custom
split_util.c but not a custom matrix.c (currently no such keyboard seems
to be merged, though).

* Remove unnecessary include of timer.h

Co-authored-by: Joel Challis <git@zvecr.com>

Co-authored-by: Joel Challis <git@zvecr.com>
2021-08-22 10:51:17 +10:00
Joel Challis 1bb7af4d44
Relocate platform specific drivers (#13894)
* Relocate platform specific drivers

* Move stm eeprom

* Tidy up slightly
2021-08-17 23:43:09 +01:00