diff --git a/keyboards/1upkeyboards/sweet16/v1/config.h b/keyboards/1upkeyboards/sweet16/v1/config.h
index 5264ef698b..4020f4fdc0 100644
--- a/keyboards/1upkeyboards/sweet16/v1/config.h
+++ b/keyboards/1upkeyboards/sweet16/v1/config.h
@@ -17,6 +17,12 @@
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
+#ifndef CONVERT_TO_PROTON_C
+# define LED_NUM_LOCK_PIN B0 // RXLED
+# define LED_CAPS_LOCK_PIN D5 // TXLED
+# define LED_PIN_ON_STATE 0
+#endif
+
/* Underglow options */
#define RGB_DI_PIN B1
#ifdef RGB_DI_PIN
diff --git a/keyboards/1upkeyboards/sweet16/v1/v1.c b/keyboards/1upkeyboards/sweet16/v1/v1.c
index 053620d333..0ff1041aac 100644
--- a/keyboards/1upkeyboards/sweet16/v1/v1.c
+++ b/keyboards/1upkeyboards/sweet16/v1/v1.c
@@ -1,21 +1 @@
#include "v1.h"
-
-void led_set_kb(uint8_t usb_led) {
-#ifndef CONVERT_TO_PROTON_C
- /* Map RXLED to USB_LED_NUM_LOCK */
- if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
- setPinOutput(B0);
- writePinLow(B0);
- } else {
- setPinInput(B0);
- }
-
- /* Map TXLED to USB_LED_CAPS_LOCK */
- if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
- setPinOutput(D5);
- writePinLow(D5);
- } else {
- setPinInput(D5);
- }
-#endif
-}
diff --git a/keyboards/alps64/alps64.c b/keyboards/alps64/alps64.c
index 0e4ef07bc0..61270aaced 100644
--- a/keyboards/alps64/alps64.c
+++ b/keyboards/alps64/alps64.c
@@ -15,23 +15,3 @@ You should have received a copy of the GNU General Public License
along with this program. If not, see .
*/
#include "alps64.h"
-
-void keyboard_pre_init_kb(void) {
- // put your keyboard start-up code here
- // runs once when the firmware starts up
- setPinOutput(C5);
- keyboard_pre_init_user();
-}
-
-void led_set_kb(uint8_t usb_led)
-{
- if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
- // output high
- writePinHigh(C5);
- } else {
- // Hi-Z
- writePinLow(C5);
- }
-
- led_set_user(usb_led);
-}
diff --git a/keyboards/alps64/config.h b/keyboards/alps64/config.h
index 25453e696f..15903818b9 100644
--- a/keyboards/alps64/config.h
+++ b/keyboards/alps64/config.h
@@ -37,6 +37,8 @@ along with this program. If not, see .
#define DIODE_DIRECTION COL2ROW
+#define LED_CAPS_LOCK_PIN C5
+
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
diff --git a/keyboards/amjpad/amjpad.c b/keyboards/amjpad/amjpad.c
index ac5991bd08..83cdedf688 100644
--- a/keyboards/amjpad/amjpad.c
+++ b/keyboards/amjpad/amjpad.c
@@ -1,30 +1 @@
#include "amjpad.h"
-#include "led.h"
-
-void matrix_init_kb(void) {
- // put your keyboard start-up code here
- // runs once when the firmware starts up
- matrix_init_user();
- led_init_ports();
-};
-
-void matrix_scan_kb(void) {
- // put your looping keyboard code here
- // runs every cycle (a lot)
- matrix_scan_user();
-};
-
-void led_init_ports(void) {
- // * Set our LED pins as output
- DDRD |= (1<<6);
-}
-
-void led_set_kb(uint8_t usb_led) {
- if (usb_led & (1<.
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
+#define LED_NUM_LOCK_PIN D6
+#define LED_PIN_ON_STATE 0
+
/* Backlight configuration
*/
#define BACKLIGHT_LEVELS 4
diff --git a/keyboards/exclusive/e6v2/le/config.h b/keyboards/exclusive/e6v2/le/config.h
index 6477d5364a..71bd66b155 100644
--- a/keyboards/exclusive/e6v2/le/config.h
+++ b/keyboards/exclusive/e6v2/le/config.h
@@ -37,6 +37,9 @@ along with this program. If not, see .
#define MATRIX_COL_PINS { B5, D0, D1, D2, D3, D4, D5, D6, D7, C6, C7, F4, F5, F6, F7 }
#define UNUSED_PINS
+#define LED_CAPS_LOCK_PIN B7
+#define LED_PIN_ON_STATE 0
+
#define RGB_DI_PIN E6
#ifdef RGB_DI_PIN
#define RGBLIGHT_ANIMATIONS
diff --git a/keyboards/exclusive/e6v2/le/le.c b/keyboards/exclusive/e6v2/le/le.c
index f27bdc113b..dd973feec5 100644
--- a/keyboards/exclusive/e6v2/le/le.c
+++ b/keyboards/exclusive/e6v2/le/le.c
@@ -1,33 +1 @@
#include "le.h"
-
-void matrix_init_kb(void) {
- // put your keyboard start-up code here
- // runs once when the firmware starts up
-
- matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
- // put your looping keyboard code here
- // runs every cycle (a lot)
-
- matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
- // put your per-action keyboard code here
- // runs for every action, just before processing by the firmware
-
- return process_record_user(keycode, record);
-}
-
-void led_set_user(uint8_t usb_led) {
- if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
- DDRB |= (1 << 7);
- PORTB &= ~(1 << 7);
- } else {
- DDRB &= ~(1 << 7);
- PORTB &= ~(1 << 7);
- }
-}
-
diff --git a/keyboards/exclusive/e7v1/config.h b/keyboards/exclusive/e7v1/config.h
index c8f1501250..11e47c3601 100644
--- a/keyboards/exclusive/e7v1/config.h
+++ b/keyboards/exclusive/e7v1/config.h
@@ -22,6 +22,8 @@
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
+#define LED_CAPS_LOCK_PIN F0
+
/* number of backlight levels */
#define BACKLIGHT_PIN B7
#ifdef BACKLIGHT_PIN
diff --git a/keyboards/exclusive/e7v1/e7v1.c b/keyboards/exclusive/e7v1/e7v1.c
index 381585e6cf..880121f4f0 100644
--- a/keyboards/exclusive/e7v1/e7v1.c
+++ b/keyboards/exclusive/e7v1/e7v1.c
@@ -1,25 +1 @@
#include "e7v1.h"
-
-void matrix_init_kb(void) {
- setPinOutput(F0);
- matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
- matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
- return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
- if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
- writePinHigh(F0);
- } else {
- writePinLow(F0);
- }
-
- led_set_user(usb_led);
-}
-
diff --git a/keyboards/fc980c/config.h b/keyboards/fc980c/config.h
index f9d3e06d6e..7e79d8d1f8 100644
--- a/keyboards/fc980c/config.h
+++ b/keyboards/fc980c/config.h
@@ -49,7 +49,10 @@ along with this program. If not, see .
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 0
-#define TAPPING_TERM 175
+
+#define LED_NUM_LOCK_PIN B4
+#define LED_CAPS_LOCK_PIN B5
+#define LED_SCROLL_LOCK_PIN B6
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
// #define LOCKING_SUPPORT_ENABLE
diff --git a/keyboards/fc980c/fc980c.c b/keyboards/fc980c/fc980c.c
index c09eacfa33..744a3614a5 100644
--- a/keyboards/fc980c/fc980c.c
+++ b/keyboards/fc980c/fc980c.c
@@ -22,46 +22,9 @@ along with this program. If not, see .
#endif
void matrix_init_kb(void) {
- // put your keyboard start-up code here
- // runs once when the firmware starts up
-
#ifdef ACTUATION_DEPTH_ADJUSTMENT
adjust_actuation_point(ACTUATION_DEPTH_ADJUSTMENT);
#endif
matrix_init_user();
}
-
-void matrix_scan_kb(void) {
- // put your looping keyboard code here
- // runs every cycle (a lot)
-
- matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
- // put your per-action keyboard code here
- // runs for every action, just before processing by the firmware
-
- return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
- if (usb_led & (1<.
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
+#define LED_CAPS_LOCK_PIN E6
+#define LED_PIN_ON_STATE 0
+
#define BACKLIGHT_PIN B7
#define BACKLIGHT_BREATHING
#define BACKLIGHT_LEVELS 4
diff --git a/keyboards/foxlab/leaf60/hotswap/hotswap.c b/keyboards/foxlab/leaf60/hotswap/hotswap.c
index 20778d927d..e2de4a7e31 100644
--- a/keyboards/foxlab/leaf60/hotswap/hotswap.c
+++ b/keyboards/foxlab/leaf60/hotswap/hotswap.c
@@ -14,46 +14,3 @@
* along with this program. If not, see .
*/
#include "hotswap.h"
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-void matrix_init_kb(void) {
- // put your keyboard start-up code here
- // runs once when the firmware starts up
- setPinOutput(E6);
- matrix_init_user();
-}
-/*
-
-void matrix_scan_kb(void) {
- // put your looping keyboard code here
- // runs every cycle (a lot)
-
- matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
- // put your per-action keyboard code here
- // runs for every action, just before processing by the firmware
-
- return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
- // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
- led_set_user(usb_led);
-}
-
-*/
-
-void led_set_kb(uint8_t usb_led) {
- if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
- writePinLow(E6);
- } else {
- writePinHigh(E6);
- }
- led_set_user(usb_led);
-}
diff --git a/keyboards/foxlab/leaf60/universal/config.h b/keyboards/foxlab/leaf60/universal/config.h
index 9f761f454d..f48bae497a 100644
--- a/keyboards/foxlab/leaf60/universal/config.h
+++ b/keyboards/foxlab/leaf60/universal/config.h
@@ -48,6 +48,9 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
+#define LED_CAPS_LOCK_PIN E6
+#define LED_PIN_ON_STATE 0
+
#define BACKLIGHT_PIN B7
#define BACKLIGHT_BREATHING
#define BACKLIGHT_LEVELS 3
diff --git a/keyboards/foxlab/leaf60/universal/universal.c b/keyboards/foxlab/leaf60/universal/universal.c
index 5fe663a1bf..197e411d70 100644
--- a/keyboards/foxlab/leaf60/universal/universal.c
+++ b/keyboards/foxlab/leaf60/universal/universal.c
@@ -14,48 +14,3 @@
* along with this program. If not, see .
*/
#include "universal.h"
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-void matrix_init_kb(void) {
- // put your keyboard start-up code here
- // runs once when the firmware starts up
- setPinOutput(E6);
- matrix_init_user();
-}
-
-/*
-
-void matrix_scan_kb(void) {
- // put your looping keyboard code here
- // runs every cycle (a lot)
-
- matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
- // put your per-action keyboard code here
- // runs for every action, just before processing by the firmware
-
- return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
- // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
- led_set_user(usb_led);
-}
-
-*/
-
-
-void led_set_kb(uint8_t usb_led) {
- if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
- writePinLow(E6);
- } else {
- writePinHigh(E6);
- }
- led_set_user(usb_led);
-}
diff --git a/keyboards/hineybush/hineyg80/config.h b/keyboards/hineybush/hineyg80/config.h
index 4072def2fb..81bf622722 100644
--- a/keyboards/hineybush/hineyg80/config.h
+++ b/keyboards/hineybush/hineyg80/config.h
@@ -22,6 +22,11 @@
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
+
+#define LED_NUM_LOCK_PIN C6
+#define LED_CAPS_LOCK_PIN B6
+#define LED_SCROLL_LOCK_PIN B5
+
/* number of backlight levels */
#ifdef BACKLIGHT_PIN
diff --git a/keyboards/hineybush/hineyg80/hineyg80.c b/keyboards/hineybush/hineyg80/hineyg80.c
index 236c646be7..a56e46e9de 100644
--- a/keyboards/hineybush/hineyg80/hineyg80.c
+++ b/keyboards/hineybush/hineyg80/hineyg80.c
@@ -14,50 +14,3 @@
* along with this program. If not, see .
*/
#include "hineyg80.h"
-
-void matrix_init_kb(void) {
- // put your keyboard start-up code here
- // runs once when the firmware starts up
-
- matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
- // put your looping keyboard code here
- // runs every cycle (a lot)
-
- matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
- // put your per-action keyboard code here
- // runs for every action, just before processing by the firmware
-
- return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
- // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
- if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
- // Turn numlock on
- writePinHigh(C6);
- } else {
- // Turn numlock off
- writePinLow(C6);
- }
- if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
- // Turn capslock on
- writePinHigh(B6);
- } else {
- // Turn capslock off
- writePinLow(B6);
- }
- if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) {
- // Turn scrolllock on
- writePinHigh(B5);
- } else {
- // Turn scrolllock off
- writePinLow(B5);
- }
- led_set_user(usb_led);
-}
diff --git a/keyboards/jc65/v32u4/config.h b/keyboards/jc65/v32u4/config.h
index 8233dd1e8c..a00f64a1f5 100644
--- a/keyboards/jc65/v32u4/config.h
+++ b/keyboards/jc65/v32u4/config.h
@@ -37,6 +37,9 @@ along with this program. If not, see .
#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B7, D4, B1, B0, B5, B4, D7, D6, B3, F4, F5 }
#define UNUSED_PINS
+#define LED_CAPS_LOCK_PIN B2
+#define LED_PIN_ON_STATE 0
+
#define RGB_DI_PIN E2
#ifdef RGB_DI_PIN
#define RGBLIGHT_ANIMATIONS
diff --git a/keyboards/jc65/v32u4/v32u4.c b/keyboards/jc65/v32u4/v32u4.c
index c69c5d5316..a6837268e1 100644
--- a/keyboards/jc65/v32u4/v32u4.c
+++ b/keyboards/jc65/v32u4/v32u4.c
@@ -1,36 +1 @@
#include "v32u4.h"
-
-void matrix_init_kb(void) {
- // put your keyboard start-up code here
- // runs once when the firmware starts up
-
- matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
- // put your looping keyboard code here
- // runs every cycle (a lot)
-
- matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
- // put your per-action keyboard code here
- // runs for every action, just before processing by the firmware
-
- return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
- // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
- if (usb_led & (1<.
/* COL2ROW, ROW2COL*/
//#define DIODE_DIRECTION
+#define LED_CAPS_LOCK_PIN B0
+#define LED_SCROLL_LOCK_PIN E6
+#define LED_PIN_ON_STATE 0
+
/* number of backlight levels */
//#define BACKLIGHT_LEVELS 3
// #define BACKLIGHT_PIN B7
diff --git a/keyboards/kmac/kmac.c b/keyboards/kmac/kmac.c
index dcbbc2f179..78334cb754 100644
--- a/keyboards/kmac/kmac.c
+++ b/keyboards/kmac/kmac.c
@@ -15,62 +15,9 @@
*/
#include "kmac.h"
-#define CAPS_PIN B0
-#define SCROLL_PIN E6
#define F_ROW_MASK 0b01
#define WASD_MASK 0b10
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-void matrix_init_kb(void) {
- // put your keyboard start-up code here
- // runs once when the firmware starts up
- setPinOutput(CAPS_PIN);
- setPinOutput(SCROLL_PIN);
-
- matrix_init_user();
-}
-
-/*
-
-void matrix_scan_kb(void) {
- // put your looping keyboard code here
- // runs every cycle (a lot)
-
- matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
- // put your per-action keyboard code here
- // runs for every action, just before processing by the firmware
-
- return process_record_user(keycode, record);
-}
-
-*/
-
-/* LED pin configuration
- * Scroll Lock: Low PE6
- * Caps Lock: Low PB0
- */
-void led_set_kb(uint8_t usb_led) {
- if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
- writePinLow(CAPS_PIN);
- } else {
- writePinHigh(CAPS_PIN);
- }
-
- if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) {
- writePinLow(SCROLL_PIN);
- } else {
- writePinHigh(SCROLL_PIN);
- }
-
- led_set_user(usb_led);
-}
-
void backlight_init_ports(void) {
setPinOutput(B1);
setPinOutput(B2);
diff --git a/keyboards/melody96/config.h b/keyboards/melody96/config.h
index 2533bfa353..038d974604 100644
--- a/keyboards/melody96/config.h
+++ b/keyboards/melody96/config.h
@@ -22,6 +22,11 @@
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION ROW2COL
+#define LED_NUM_LOCK_PIN C6
+#define LED_CAPS_LOCK_PIN C7
+#define LED_SCROLL_LOCK_PIN B5
+#define LED_PIN_ON_STATE 0
+
/* number of backlight levels */
#define BACKLIGHT_PIN B6
#ifdef BACKLIGHT_PIN
diff --git a/keyboards/melody96/melody96.c b/keyboards/melody96/melody96.c
index 2fe274ee47..44e813586b 100644
--- a/keyboards/melody96/melody96.c
+++ b/keyboards/melody96/melody96.c
@@ -1,23 +1 @@
#include "melody96.h"
-
-void led_set_kb(uint8_t usb_led) {
- if (usb_led & (1 << USB_LED_NUM_LOCK)) {
- DDRC |= (1 << 6); PORTC &= ~(1 << 6);
- } else {
- DDRC &= ~(1 << 6); PORTC &= ~(1 << 6);
- }
-
- if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
- DDRC |= (1 << 7); PORTC &= ~(1 << 7);
- } else {
- DDRC &= ~(1 << 7); PORTC &= ~(1 << 7);
- }
-
- if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
- DDRB |= (1 << 5); PORTB &= ~(1 << 5);
- } else {
- DDRB &= ~(1 << 5); PORTB &= ~(1 << 5);
- }
-
- led_set_user(usb_led);
-}
diff --git a/keyboards/peiorisboards/ixora/config.h b/keyboards/peiorisboards/ixora/config.h
index 77ba89c292..4b52d18f3f 100644
--- a/keyboards/peiorisboards/ixora/config.h
+++ b/keyboards/peiorisboards/ixora/config.h
@@ -22,3 +22,7 @@
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 0
+
+#define LED_NUM_LOCK_PIN A9
+#define LED_CAPS_LOCK_PIN A10
+#define LED_SCROLL_LOCK_PIN A8
diff --git a/keyboards/peiorisboards/ixora/ixora.c b/keyboards/peiorisboards/ixora/ixora.c
index 7996db629f..f2dcd864aa 100644
--- a/keyboards/peiorisboards/ixora/ixora.c
+++ b/keyboards/peiorisboards/ixora/ixora.c
@@ -1,43 +1 @@
#include "ixora.h"
-
-void matrix_init_kb(void) {
- // put your keyboard start-up code here
- // runs once when the firmware starts up
- setPinOutput(A8);
- setPinOutput(A9);
- setPinOutput(A10);
- writePinLow(A8);
- writePinLow(A9);
- writePinLow(A10);
-
- matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
-
- matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
-
- return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
- if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
- writePinHigh(A10);
- } else {
- writePinLow(A10);
- }
- if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
- writePinHigh(A9);
- } else {
- writePinLow(A9);
- }
- if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) {
- writePinHigh(A8);
- } else {
- writePinLow(A8);
- }
- led_set_user(usb_led);
-}
diff --git a/keyboards/redscarf_iiplus/verb/config.h b/keyboards/redscarf_iiplus/verb/config.h
index 3fecdcac3b..d920596ec9 100755
--- a/keyboards/redscarf_iiplus/verb/config.h
+++ b/keyboards/redscarf_iiplus/verb/config.h
@@ -49,10 +49,9 @@ along with this program. If not, see .
/* COL2ROW, ROW2COL*/
#define DIODE_DIRECTION COL2ROW
-/*
- * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
- */
-//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+#define LED_NUM_LOCK_PIN E6
+#define LED_CAPS_LOCK_PIN C7
+#define LED_PIN_ON_STATE 0
#define BACKLIGHT_PIN B7
// #define BACKLIGHT_BREATHING
diff --git a/keyboards/redscarf_iiplus/verb/verb.c b/keyboards/redscarf_iiplus/verb/verb.c
index 62ea1859d3..27a3d81533 100755
--- a/keyboards/redscarf_iiplus/verb/verb.c
+++ b/keyboards/redscarf_iiplus/verb/verb.c
@@ -14,38 +14,3 @@
* along with this program. If not, see .
*/
#include "verb.h"
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-void matrix_init_kb(void) {
- // put your keyboard start-up code here
- // runs once when the firmware starts up
-
- matrix_init_user();
- led_init_ports();
-}
-
-void led_init_ports(void) {
- setPinOutput(C7);
- setPinOutput(E6);
-}
-
-void led_set_kb(uint8_t usb_led) {
- // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
- if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
- writePinLow(C7);
- } else {
- writePinHigh(C7);
- }
-
- if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
- writePinLow(E6);
- } else {
- writePinHigh(E6);
- }
-
- led_set_user(usb_led);
-}
diff --git a/keyboards/sck/osa/config.h b/keyboards/sck/osa/config.h
index 6710134400..9d041d0f0c 100644
--- a/keyboards/sck/osa/config.h
+++ b/keyboards/sck/osa/config.h
@@ -91,6 +91,10 @@ along with this program. If not, see .
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
+#define LED_NUM_LOCK_PIN C7
+#define LED_CAPS_LOCK_PIN C6
+#define LED_SCROLL_LOCK_PIN B6
+
/* number of backlight levels */
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
diff --git a/keyboards/sck/osa/osa.c b/keyboards/sck/osa/osa.c
index 138a28893b..7f144035e5 100644
--- a/keyboards/sck/osa/osa.c
+++ b/keyboards/sck/osa/osa.c
@@ -14,60 +14,3 @@
* along with this program. If not, see .
*/
#include "osa.h"
-
-
-// Optional override functions below.
-// You can leave any or all of these undefined.
-// These are only required if you want to perform custom actions.
-
-/*
-
-void matrix_init_kb(void) {
- // put your keyboard start-up code here
- // runs once when the firmware starts up
-
- matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
- // put your looping keyboard code here
- // runs every cycle (a lot)
-
- matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
- // put your per-action keyboard code here
- // runs for every action, just before processing by the firmware
-
- return process_record_user(keycode, record);
-}
-*/
-
-void matrix_init_board(void){
- setPinOutput(C7);
- setPinOutput(C6);
- setPinOutput(B6);
-}
-
-void led_set_kb(uint8_t usb_led) {
- // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
- if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
- writePinHigh(C7);
- } else {
- writePinLow(C7);
- }
- if (IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)) {
- writePinHigh(C6);
- } else {
- writePinLow(C6);
- }
- if (IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)) {
- writePinHigh(B6);
- } else {
- writePinLow(B6);
- }
- led_set_user(usb_led);
-}
-