diff --git a/keyboards/cipulot/ec_typek/config.h b/keyboards/cipulot/ec_typek/config.h
new file mode 100644
index 0000000000..a6619c600c
--- /dev/null
+++ b/keyboards/cipulot/ec_typek/config.h
@@ -0,0 +1,81 @@
+/* Copyright 2023 Cipulot
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 15
+
+#define MATRIX_ROW_PINS \
+ { B14, B13, B12, A6, A7 }
+
+#define AMUX_COUNT 2
+#define AMUX_MAX_COLS_COUNT 8
+
+#define AMUX_EN_PINS \
+ { B9, B8 }
+
+#define AMUX_SEL_PINS \
+ { B7, B6, B5 }
+
+#define AMUX_COL_CHANNELS_SIZES \
+ { 7, 8 }
+
+#define AMUX_0_COL_CHANNELS \
+ { 3, 0, 1, 2, 4, 6, 7 }
+
+#define AMUX_1_COL_CHANNELS \
+ { 3, 0, 1, 2, 4, 6, 7, 5 }
+
+#define AMUX_COL_CHANNELS AMUX_0_COL_CHANNELS, AMUX_1_COL_CHANNELS
+
+#define DISCHARGE_PIN A1
+#define ANALOG_PORT A2
+
+#define DEFAULT_ACTUATION_MODE 0
+#define DEFAULT_MODE_0_ACTUATION_LEVEL 550
+#define DEFAULT_MODE_0_RELEASE_LEVEL 500
+#define DEFAULT_MODE_1_INITIAL_DEADZONE_OFFSET DEFAULT_MODE_0_ACTUATION_LEVEL
+#define DEFAULT_MODE_1_ACTUATION_OFFSET 70
+#define DEFAULT_MODE_1_RELEASE_OFFSET 70
+#define DEFAULT_EXTREMUM 1023
+#define EXPECTED_NOISE_FLOOR 0
+#define NOISE_FLOOR_THRESHOLD 50
+#define BOTTOMING_CALIBRATION_THRESHOLD 100
+#define DEFAULT_NOISE_FLOOR_SAMPLING_COUNT 30
+#define DEFAULT_BOTTOMING_READING 1023
+#define DEFAULT_CALIBRATION_STARTER true
+
+#define DISCHARGE_TIME 10
+
+// #define DEBUG_MATRIX_SCAN_RATE
+
+#define EECONFIG_KB_DATA_SIZE 171
+
+// RGB & Indicators
+// PWM driver with direct memory access (DMA) support
+#define WS2812_PWM_COMPLEMENTARY_OUTPUT
+#define WS2812_PWM_DRIVER PWMD1
+#define WS2812_PWM_CHANNEL 3
+#define WS2812_PWM_PAL_MODE 1
+#define WS2812_DMA_STREAM STM32_DMA2_STREAM5
+#define WS2812_DMA_CHANNEL 6
+#define WS2812_DMAMUX_ID STM32_DMAMUX1_TIM1_UP
+
+#define RGBLIGHT_DEFAULT_VAL 200
+#define RGBLIGHT_DEFAULT_MODE (RGBLIGHT_MODE_RAINBOW_SWIRL + 5)
+
+#define NUM_INDICATOR_INDEX 2
+#define CAPS_INDICATOR_INDEX 1
+#define SCROLL_INDICATOR_INDEX 0
diff --git a/keyboards/cipulot/ec_typek/ec_switch_matrix.c b/keyboards/cipulot/ec_typek/ec_switch_matrix.c
new file mode 100644
index 0000000000..da58a75bbc
--- /dev/null
+++ b/keyboards/cipulot/ec_typek/ec_switch_matrix.c
@@ -0,0 +1,318 @@
+/* Copyright 2023 Cipulot
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+
+#include "ec_switch_matrix.h"
+#include "analog.h"
+#include "atomic_util.h"
+#include "math.h"
+#include "print.h"
+#include "wait.h"
+
+#if defined(__AVR__)
+# error "AVR platforms not supported due to a variety of reasons. Among them there are limited memory, limited number of pins and ADC not being able to give satisfactory results."
+#endif
+
+#define OPEN_DRAIN_SUPPORT defined(PAL_MODE_OUTPUT_OPENDRAIN)
+
+eeprom_ec_config_t eeprom_ec_config;
+ec_config_t ec_config;
+
+// Pin and port array
+const pin_t row_pins[] = MATRIX_ROW_PINS;
+const pin_t amux_sel_pins[] = AMUX_SEL_PINS;
+const pin_t amux_en_pins[] = AMUX_EN_PINS;
+const pin_t amux_n_col_sizes[] = AMUX_COL_CHANNELS_SIZES;
+const pin_t amux_n_col_channels[][AMUX_MAX_COLS_COUNT] = {AMUX_COL_CHANNELS};
+
+#define AMUX_SEL_PINS_COUNT ARRAY_SIZE(amux_sel_pins)
+#define EXPECTED_AMUX_SEL_PINS_COUNT ceil(log2(AMUX_MAX_COLS_COUNT)
+// Checks for the correctness of the configuration
+_Static_assert(ARRAY_SIZE(amux_en_pins) == AMUX_COUNT, "AMUX_EN_PINS doesn't have the minimum number of bits required to enable all the multiplexers available");
+// Check that number of select pins is enough to select all the channels
+_Static_assert(AMUX_SEL_PINS_COUNT == EXPECTED_AMUX_SEL_PINS_COUNT), "AMUX_SEL_PINS doesn't have the minimum number of bits required address all the channels");
+// Check that number of elements in AMUX_COL_CHANNELS_SIZES is enough to specify the number of channels for all the multiplexers available
+_Static_assert(ARRAY_SIZE(amux_n_col_sizes) == AMUX_COUNT, "AMUX_COL_CHANNELS_SIZES doesn't have the minimum number of elements required to specify the number of channels for all the multiplexers available");
+// static ec_config_t config;
+static uint16_t sw_value[MATRIX_ROWS][MATRIX_COLS];
+
+static adc_mux adcMux;
+
+// Initialize the row pins
+void init_row(void) {
+ // Set all row pins as output and low
+ for (uint8_t idx = 0; idx < MATRIX_ROWS; idx++) {
+ gpio_set_pin_output(row_pins[idx]);
+ gpio_write_pin_low(row_pins[idx]);
+ }
+}
+
+// Initialize the multiplexers
+void init_amux(void) {
+ for (uint8_t idx = 0; idx < AMUX_COUNT; idx++) {
+ gpio_set_pin_output(amux_en_pins[idx]);
+ gpio_write_pin_low(amux_en_pins[idx]);
+ }
+ for (uint8_t idx = 0; idx < AMUX_SEL_PINS_COUNT; idx++) {
+ gpio_set_pin_output(amux_sel_pins[idx]);
+ }
+}
+
+// Select the multiplexer channel of the specified multiplexer
+void select_amux_channel(uint8_t channel, uint8_t col) {
+ // Get the channel for the specified multiplexer
+ uint8_t ch = amux_n_col_channels[channel][col];
+ // momentarily disable specified multiplexer
+ gpio_write_pin_high(amux_en_pins[channel]);
+ // Select the multiplexer channel
+ for (uint8_t i = 0; i < AMUX_SEL_PINS_COUNT; i++) {
+ gpio_write_pin(amux_sel_pins[i], ch & (1 << i));
+ }
+ // re enable specified multiplexer
+ gpio_write_pin_low(amux_en_pins[channel]);
+}
+
+// Disable all the unused multiplexers
+void disable_unused_amux(uint8_t channel) {
+ // disable all the other multiplexers apart from the current selected one
+ for (uint8_t idx = 0; idx < AMUX_COUNT; idx++) {
+ if (idx != channel) {
+ gpio_write_pin_high(amux_en_pins[idx]);
+ }
+ }
+}
+// Discharge the peak hold capacitor
+void discharge_capacitor(void) {
+#ifdef OPEN_DRAIN_SUPPORT
+ gpio_write_pin_low(DISCHARGE_PIN);
+#else
+ gpio_write_pin_low(DISCHARGE_PIN);
+ gpio_set_pin_output(DISCHARGE_PIN);
+#endif
+}
+
+// Charge the peak hold capacitor
+void charge_capacitor(uint8_t row) {
+#ifdef OPEN_DRAIN_SUPPORT
+ gpio_write_pin_high(DISCHARGE_PIN);
+#else
+ gpio_set_pin_input(DISCHARGE_PIN);
+#endif
+ gpio_write_pin_high(row_pins[row]);
+}
+
+// Initialize the peripherals pins
+int ec_init(void) {
+ // Initialize ADC
+ palSetLineMode(ANALOG_PORT, PAL_MODE_INPUT_ANALOG);
+ adcMux = pinToMux(ANALOG_PORT);
+
+ // Dummy call to make sure that adcStart() has been called in the appropriate state
+ adc_read(adcMux);
+
+ // Initialize discharge pin as discharge mode
+ gpio_write_pin_low(DISCHARGE_PIN);
+#ifdef OPEN_DRAIN_SUPPORT
+ gpio_set_pin_output_open_drain(DISCHARGE_PIN);
+#else
+ gpio_set_pin_output(DISCHARGE_PIN);
+#endif
+
+ // Initialize drive lines
+ init_row();
+
+ // Initialize AMUXs
+ init_amux();
+
+ return 0;
+}
+
+// Get the noise floor
+void ec_noise_floor(void) {
+ // Initialize the noise floor
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+ ec_config.noise_floor[row][col] = 0;
+ }
+ }
+
+ // Sample the noise floor
+ for (uint8_t i = 0; i < DEFAULT_NOISE_FLOOR_SAMPLING_COUNT; i++) {
+ for (uint8_t amux = 0; amux < AMUX_COUNT; amux++) {
+ disable_unused_amux(amux);
+ for (uint8_t col = 0; col < amux_n_col_sizes[amux]; col++) {
+ uint8_t sum = 0;
+ for (uint8_t i = 0; i < (amux > 0 ? amux : 0); i++)
+ sum += amux_n_col_sizes[i];
+ uint8_t adjusted_col = col + sum;
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ ec_config.noise_floor[row][adjusted_col] += ec_readkey_raw(amux, row, col);
+ }
+ }
+ }
+ wait_ms(5);
+ }
+
+ // Average the noise floor
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+ ec_config.noise_floor[row][col] /= DEFAULT_NOISE_FLOOR_SAMPLING_COUNT;
+ }
+ }
+}
+
+// Scan key values and update matrix state
+bool ec_matrix_scan(matrix_row_t current_matrix[]) {
+ bool updated = false;
+
+ for (uint8_t amux = 0; amux < AMUX_COUNT; amux++) {
+ disable_unused_amux(amux);
+ for (uint8_t col = 0; col < amux_n_col_sizes[amux]; col++) {
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ uint8_t sum = 0;
+ for (uint8_t i = 0; i < (amux > 0 ? amux : 0); i++)
+ sum += amux_n_col_sizes[i];
+ uint8_t adjusted_col = col + sum;
+ sw_value[row][adjusted_col] = ec_readkey_raw(amux, row, col);
+
+ if (ec_config.bottoming_calibration) {
+ if (ec_config.bottoming_calibration_starter[row][adjusted_col]) {
+ ec_config.bottoming_reading[row][adjusted_col] = sw_value[row][adjusted_col];
+ ec_config.bottoming_calibration_starter[row][adjusted_col] = false;
+ } else if (sw_value[row][adjusted_col] > ec_config.bottoming_reading[row][adjusted_col]) {
+ ec_config.bottoming_reading[row][adjusted_col] = sw_value[row][adjusted_col];
+ }
+ } else {
+ updated |= ec_update_key(¤t_matrix[row], row, adjusted_col, sw_value[row][adjusted_col]);
+ }
+ }
+ }
+ }
+
+ return ec_config.bottoming_calibration ? false : updated;
+}
+
+// Read the capacitive sensor value
+uint16_t ec_readkey_raw(uint8_t channel, uint8_t row, uint8_t col) {
+ uint16_t sw_value = 0;
+
+ // Select the multiplexer
+ select_amux_channel(channel, col);
+
+ // Set the row pin to low state to avoid ghosting
+ gpio_write_pin_low(row_pins[row]);
+
+ ATOMIC_BLOCK_FORCEON {
+ // Set the row pin to high state and have capacitor charge
+ charge_capacitor(row);
+ // Read the ADC value
+ sw_value = adc_read(adcMux);
+ }
+ // Discharge peak hold capacitor
+ discharge_capacitor();
+ // Waiting for the ghost capacitor to discharge fully
+ wait_us(DISCHARGE_TIME);
+
+ return sw_value;
+}
+
+// Update press/release state of key
+bool ec_update_key(matrix_row_t* current_row, uint8_t row, uint8_t col, uint16_t sw_value) {
+ bool current_state = (*current_row >> col) & 1;
+
+ // Real Time Noise Floor Calibration
+ if (sw_value < (ec_config.noise_floor[row][col] - NOISE_FLOOR_THRESHOLD)) {
+ uprintf("Noise Floor Change: %d, %d, %d\n", row, col, sw_value);
+ ec_config.noise_floor[row][col] = sw_value;
+ ec_config.rescaled_mode_0_actuation_threshold[row][col] = rescale(ec_config.mode_0_actuation_threshold, 0, 1023, ec_config.noise_floor[row][col], eeprom_ec_config.bottoming_reading[row][col]);
+ ec_config.rescaled_mode_0_release_threshold[row][col] = rescale(ec_config.mode_0_release_threshold, 0, 1023, ec_config.noise_floor[row][col], eeprom_ec_config.bottoming_reading[row][col]);
+ ec_config.rescaled_mode_1_initial_deadzone_offset[row][col] = rescale(ec_config.mode_1_initial_deadzone_offset, 0, 1023, ec_config.noise_floor[row][col], eeprom_ec_config.bottoming_reading[row][col]);
+ }
+
+ // Normal board-wide APC
+ if (ec_config.actuation_mode == 0) {
+ if (current_state && sw_value < ec_config.rescaled_mode_0_release_threshold[row][col]) {
+ *current_row &= ~(1 << col);
+ uprintf("Key released: %d, %d, %d\n", row, col, sw_value);
+ return true;
+ }
+ if ((!current_state) && sw_value > ec_config.rescaled_mode_0_actuation_threshold[row][col]) {
+ *current_row |= (1 << col);
+ uprintf("Key pressed: %d, %d, %d\n", row, col, sw_value);
+ return true;
+ }
+ }
+ // Rapid Trigger
+ else if (ec_config.actuation_mode == 1) {
+ // Is key in active zone?
+ if (sw_value > ec_config.rescaled_mode_1_initial_deadzone_offset[row][col]) {
+ // Is key pressed while in active zone?
+ if (current_state) {
+ // Is the key still moving down?
+ if (sw_value > ec_config.extremum[row][col]) {
+ ec_config.extremum[row][col] = sw_value;
+ uprintf("Key pressed: %d, %d, %d\n", row, col, sw_value);
+ }
+ // Has key moved up enough to be released?
+ else if (sw_value < ec_config.extremum[row][col] - ec_config.mode_1_release_offset) {
+ ec_config.extremum[row][col] = sw_value;
+ *current_row &= ~(1 << col);
+ uprintf("Key released: %d, %d, %d\n", row, col, sw_value);
+ return true;
+ }
+ }
+ // Key is not pressed while in active zone
+ else {
+ // Is the key still moving up?
+ if (sw_value < ec_config.extremum[row][col]) {
+ ec_config.extremum[row][col] = sw_value;
+ }
+ // Has key moved down enough to be pressed?
+ else if (sw_value > ec_config.extremum[row][col] + ec_config.mode_1_actuation_offset) {
+ ec_config.extremum[row][col] = sw_value;
+ *current_row |= (1 << col);
+ uprintf("Key pressed: %d, %d, %d\n", row, col, sw_value);
+ return true;
+ }
+ }
+ }
+ // Key is not in active zone
+ else {
+ // Check to avoid key being stuck in pressed state near the active zone threshold
+ if (sw_value < ec_config.extremum[row][col]) {
+ ec_config.extremum[row][col] = sw_value;
+ *current_row &= ~(1 << col);
+ return true;
+ }
+ }
+ }
+ return false;
+}
+
+// Print the matrix values
+void ec_print_matrix(void) {
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ for (uint8_t col = 0; col < MATRIX_COLS - 1; col++) {
+ uprintf("%4d,", sw_value[row][col]);
+ }
+ uprintf("%4d\n", sw_value[row][MATRIX_COLS - 1]);
+ }
+ print("\n");
+}
+
+// Rescale the value to a different range
+uint16_t rescale(uint16_t x, uint16_t in_min, uint16_t in_max, uint16_t out_min, uint16_t out_max) {
+ return (x - in_min) * (out_max - out_min) / (in_max - in_min) + out_min;
+}
diff --git a/keyboards/cipulot/ec_typek/ec_switch_matrix.h b/keyboards/cipulot/ec_typek/ec_switch_matrix.h
new file mode 100644
index 0000000000..fad20360bc
--- /dev/null
+++ b/keyboards/cipulot/ec_typek/ec_switch_matrix.h
@@ -0,0 +1,84 @@
+/* Copyright 2023 Cipulot
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+
+#pragma once
+
+#include
+#include
+#include "matrix.h"
+#include "eeconfig.h"
+#include "util.h"
+
+typedef struct _indicator_config_t {
+ uint8_t h;
+ uint8_t s;
+ uint8_t v;
+ bool enabled;
+} indicator_config;
+
+typedef struct PACKED {
+ indicator_config num;
+ indicator_config caps;
+ indicator_config scroll;
+ uint8_t actuation_mode; // 0: normal board-wide APC, 1: Rapid trigger from specific board-wide actuation point, 2: Rapid trigger from resting point
+ uint16_t mode_0_actuation_threshold; // threshold for key press in mode 0
+ uint16_t mode_0_release_threshold; // threshold for key release in mode 0
+ uint16_t mode_1_initial_deadzone_offset; // threshold for key press in mode 1
+ uint8_t mode_1_actuation_offset; // offset for key press in mode 1 and 2 (1-255)
+ uint8_t mode_1_release_offset; // offset for key release in mode 1 and 2 (1-255)
+ uint16_t bottoming_reading[MATRIX_ROWS][MATRIX_COLS]; // bottoming reading
+} eeprom_ec_config_t;
+
+typedef struct {
+ uint8_t actuation_mode; // 0: normal board-wide APC, 1: Rapid trigger from specific board-wide actuation point (it can be very near that baseline noise and be "full travel")
+ uint16_t mode_0_actuation_threshold; // threshold for key press in mode 0
+ uint16_t mode_0_release_threshold; // threshold for key release in mode 0
+ uint16_t mode_1_initial_deadzone_offset; // threshold for key press in mode 1 (initial deadzone)
+ uint16_t rescaled_mode_0_actuation_threshold[MATRIX_ROWS][MATRIX_COLS]; // threshold for key press in mode 0 rescaled to actual scale
+ uint16_t rescaled_mode_0_release_threshold[MATRIX_ROWS][MATRIX_COLS]; // threshold for key release in mode 0 rescaled to actual scale
+ uint16_t rescaled_mode_1_initial_deadzone_offset[MATRIX_ROWS][MATRIX_COLS]; // threshold for key press in mode 1 (initial deadzone) rescaled to actual scale
+ uint8_t mode_1_actuation_offset; // offset for key press in mode 1 (1-255)
+ uint8_t mode_1_release_offset; // offset for key release in mode 1 (1-255)
+ uint16_t extremum[MATRIX_ROWS][MATRIX_COLS]; // extremum values for mode 1
+ uint16_t noise_floor[MATRIX_ROWS][MATRIX_COLS]; // noise floor detected during startup
+ bool bottoming_calibration; // calibration mode for bottoming out values (true: calibration mode, false: normal mode)
+ bool bottoming_calibration_starter[MATRIX_ROWS][MATRIX_COLS]; // calibration mode for bottoming out values (true: calibration mode, false: normal mode)
+ uint16_t bottoming_reading[MATRIX_ROWS][MATRIX_COLS]; // bottoming reading
+} ec_config_t;
+
+// Check if the size of the reserved persistent memory is the same as the size of struct eeprom_ec_config_t
+_Static_assert(sizeof(eeprom_ec_config_t) == EECONFIG_KB_DATA_SIZE, "Mismatch in keyboard EECONFIG stored data");
+
+extern eeprom_ec_config_t eeprom_ec_config;
+
+extern ec_config_t ec_config;
+
+void init_row(void);
+void init_amux(void);
+void select_amux_channel(uint8_t channel, uint8_t col);
+void disable_unused_amux(uint8_t channel);
+void discharge_capacitor(void);
+void charge_capacitor(uint8_t row);
+
+int ec_init(void);
+void ec_noise_floor(void);
+bool ec_matrix_scan(matrix_row_t current_matrix[]);
+uint16_t ec_readkey_raw(uint8_t channel, uint8_t row, uint8_t col);
+bool ec_update_key(matrix_row_t* current_row, uint8_t row, uint8_t col, uint16_t sw_value);
+void ec_print_matrix(void);
+
+uint16_t rescale(uint16_t x, uint16_t in_min, uint16_t in_max, uint16_t out_min, uint16_t out_max);
+bool indicators_callback(void);
diff --git a/keyboards/cipulot/ec_typek/ec_typek.c b/keyboards/cipulot/ec_typek/ec_typek.c
new file mode 100644
index 0000000000..035c90303c
--- /dev/null
+++ b/keyboards/cipulot/ec_typek/ec_typek.c
@@ -0,0 +1,119 @@
+/* Copyright 2023 Cipulot
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+
+#include "ec_switch_matrix.h"
+#include "quantum.h"
+
+void eeconfig_init_kb(void) {
+ // Default values
+ eeprom_ec_config.num.h = 0;
+ eeprom_ec_config.num.s = 0;
+ eeprom_ec_config.num.v = 60;
+ eeprom_ec_config.num.enabled = true;
+ eeprom_ec_config.caps.h = 0;
+ eeprom_ec_config.caps.s = 0;
+ eeprom_ec_config.caps.v = 60;
+ eeprom_ec_config.caps.enabled = true;
+ eeprom_ec_config.scroll.h = 0;
+ eeprom_ec_config.scroll.s = 0;
+ eeprom_ec_config.scroll.v = 60;
+ eeprom_ec_config.scroll.enabled = true;
+ eeprom_ec_config.actuation_mode = DEFAULT_ACTUATION_MODE;
+ eeprom_ec_config.mode_0_actuation_threshold = DEFAULT_MODE_0_ACTUATION_LEVEL;
+ eeprom_ec_config.mode_0_release_threshold = DEFAULT_MODE_0_RELEASE_LEVEL;
+ eeprom_ec_config.mode_1_initial_deadzone_offset = DEFAULT_MODE_1_INITIAL_DEADZONE_OFFSET;
+ eeprom_ec_config.mode_1_actuation_offset = DEFAULT_MODE_1_ACTUATION_OFFSET;
+ eeprom_ec_config.mode_1_release_offset = DEFAULT_MODE_1_RELEASE_OFFSET;
+
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+ eeprom_ec_config.bottoming_reading[row][col] = DEFAULT_BOTTOMING_READING;
+ }
+ }
+ // Write default value to EEPROM now
+ eeconfig_update_kb_datablock(&eeprom_ec_config);
+
+ eeconfig_init_user();
+}
+
+// On Keyboard startup
+void keyboard_post_init_kb(void) {
+ // Read custom menu variables from memory
+ eeconfig_read_kb_datablock(&eeprom_ec_config);
+
+ // Set runtime values to EEPROM values
+ ec_config.actuation_mode = eeprom_ec_config.actuation_mode;
+ ec_config.mode_0_actuation_threshold = eeprom_ec_config.mode_0_actuation_threshold;
+ ec_config.mode_0_release_threshold = eeprom_ec_config.mode_0_release_threshold;
+ ec_config.mode_1_initial_deadzone_offset = eeprom_ec_config.mode_1_initial_deadzone_offset;
+ ec_config.mode_1_actuation_offset = eeprom_ec_config.mode_1_actuation_offset;
+ ec_config.mode_1_release_offset = eeprom_ec_config.mode_1_release_offset;
+ ec_config.bottoming_calibration = false;
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+ ec_config.bottoming_calibration_starter[row][col] = true;
+ ec_config.bottoming_reading[row][col] = eeprom_ec_config.bottoming_reading[row][col];
+ ec_config.rescaled_mode_0_actuation_threshold[row][col] = rescale(ec_config.mode_0_actuation_threshold, 0, 1023, ec_config.noise_floor[row][col], eeprom_ec_config.bottoming_reading[row][col]);
+ ec_config.rescaled_mode_0_release_threshold[row][col] = rescale(ec_config.mode_0_release_threshold, 0, 1023, ec_config.noise_floor[row][col], eeprom_ec_config.bottoming_reading[row][col]);
+ ec_config.rescaled_mode_1_initial_deadzone_offset[row][col] = rescale(ec_config.mode_1_initial_deadzone_offset, 0, 1023, ec_config.noise_floor[row][col], eeprom_ec_config.bottoming_reading[row][col]);
+ }
+ }
+
+ // Set the RGB LEDs range that will be used for the effects
+ rgblight_set_effect_range(3, 66);
+ // Call the indicator callback to set the indicator color
+ indicators_callback();
+
+ keyboard_post_init_user();
+}
+
+// This function gets called when caps, num, scroll change
+bool led_update_kb(led_t led_state) {
+ indicators_callback();
+ return true;
+}
+
+// This function is called when layers change
+layer_state_t layer_state_set_user(layer_state_t state) {
+ indicators_callback();
+ return state;
+}
+
+// INDICATOR CALLBACK ------------------------------------------------------------------------------
+/* LED index to physical position
+ *
+ * LED2 | LED1 | LED0
+ * -----+------+--------
+ * Num | Caps | Scroll |
+ */
+bool indicators_callback(void) {
+ if ((eeprom_ec_config.num.enabled) && (host_keyboard_led_state().num_lock))
+ sethsv(eeprom_ec_config.num.h, eeprom_ec_config.num.s, eeprom_ec_config.num.v, (rgb_led_t *)&led[NUM_INDICATOR_INDEX]);
+ else
+ sethsv(0, 0, 0, (rgb_led_t *)&led[NUM_INDICATOR_INDEX]);
+
+ if ((eeprom_ec_config.caps.enabled) && (host_keyboard_led_state().caps_lock))
+ sethsv(eeprom_ec_config.caps.h, eeprom_ec_config.caps.s, eeprom_ec_config.caps.v, (rgb_led_t *)&led[CAPS_INDICATOR_INDEX]);
+ else
+ sethsv(0, 0, 0, (rgb_led_t *)&led[CAPS_INDICATOR_INDEX]);
+
+ if ((eeprom_ec_config.scroll.enabled) && (host_keyboard_led_state().scroll_lock))
+ sethsv(eeprom_ec_config.scroll.h, eeprom_ec_config.scroll.s, eeprom_ec_config.scroll.v, (rgb_led_t *)&led[SCROLL_INDICATOR_INDEX]);
+ else
+ sethsv(0, 0, 0, (rgb_led_t *)&led[SCROLL_INDICATOR_INDEX]);
+
+ return true;
+}
diff --git a/keyboards/cipulot/ec_typek/halconf.h b/keyboards/cipulot/ec_typek/halconf.h
new file mode 100644
index 0000000000..24de095485
--- /dev/null
+++ b/keyboards/cipulot/ec_typek/halconf.h
@@ -0,0 +1,23 @@
+/* Copyright 2023 Cipulot
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+
+#pragma once
+
+#define HAL_USE_ADC TRUE
+#define HAL_USE_PWM TRUE
+#define HAL_USE_PAL TRUE
+
+#include_next
diff --git a/keyboards/cipulot/ec_typek/info.json b/keyboards/cipulot/ec_typek/info.json
new file mode 100644
index 0000000000..e4642ee555
--- /dev/null
+++ b/keyboards/cipulot/ec_typek/info.json
@@ -0,0 +1,133 @@
+{
+ "manufacturer": "Cipulot",
+ "keyboard_name": "EC Type-K",
+ "maintainer": "Cipulot",
+ "bootloader": "stm32-dfu",
+ "build": {
+ "lto": true
+ },
+ "diode_direction": "COL2ROW",
+ "eeprom": {
+ "wear_leveling": {
+ "backing_size": 4096
+ }
+ },
+ "features": {
+ "bootmagic": false,
+ "console": true,
+ "extrakey": true,
+ "mousekey": true,
+ "nkro": true,
+ "rgblight": true
+ },
+ "processor": "STM32F411",
+ "qmk": {
+ "locking": {
+ "enabled": true,
+ "resync": true
+ }
+ },
+ "rgblight": {
+ "animations": {
+ "alternating": true,
+ "breathing": true,
+ "christmas": true,
+ "knight": true,
+ "rainbow_mood": true,
+ "rainbow_swirl": true,
+ "rgb_test": true,
+ "snake": true,
+ "static_gradient": true,
+ "twinkle": true
+ },
+ "led_count": 69,
+ "led_map": [0, 1, 2, 3, 4, 5, 66, 67, 68, 35, 34, 33, 32, 31, 30, 29, 28, 27, 26, 25, 24, 23, 22, 21, 20, 19, 18, 17, 16, 15, 14, 13, 12, 11, 10, 9, 8, 7, 6, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65],
+ "max_brightness": 200
+ },
+ "usb": {
+ "device_version": "0.0.1",
+ "pid": "0x6BB4",
+ "shared_endpoint": {
+ "keyboard": true
+ },
+ "vid": "0x6369"
+ },
+ "ws2812": {
+ "driver": "pwm",
+ "pin": "B15"
+ },
+ "layouts": {
+ "LAYOUT": {
+ "layout": [
+ {"matrix": [1, 0], "x": 0.75, "y": 0},
+ {"matrix": [0, 0], "x": 2.5, "y": 0},
+ {"matrix": [0, 1], "x": 3.5, "y": 0},
+ {"matrix": [0, 2], "x": 4.5, "y": 0},
+ {"matrix": [0, 3], "x": 5.5, "y": 0},
+ {"matrix": [0, 4], "x": 6.5, "y": 0},
+ {"matrix": [0, 5], "x": 7.5, "y": 0},
+ {"matrix": [0, 6], "x": 8.5, "y": 0},
+ {"matrix": [0, 7], "x": 10.5, "y": 0},
+ {"matrix": [0, 8], "x": 11.5, "y": 0},
+ {"matrix": [0, 9], "x": 12.5, "y": 0},
+ {"matrix": [0, 10], "x": 13.5, "y": 0},
+ {"matrix": [0, 11], "x": 14.5, "y": 0},
+ {"matrix": [0, 12], "x": 15.5, "y": 0},
+ {"matrix": [0, 13], "x": 16.5, "y": 0},
+ {"matrix": [0, 14], "x": 17.5, "y": 0},
+ {"matrix": [2, 0], "x": 0.5, "y": 1},
+ {"matrix": [1, 1], "x": 2.25, "y": 1, "w": 1.5},
+ {"matrix": [1, 2], "x": 3.75, "y": 1},
+ {"matrix": [1, 3], "x": 4.75, "y": 1},
+ {"matrix": [1, 4], "x": 5.75, "y": 1},
+ {"matrix": [1, 5], "x": 6.75, "y": 1},
+ {"matrix": [1, 6], "x": 7.75, "y": 1},
+ {"matrix": [1, 7], "x": 10.25, "y": 1},
+ {"matrix": [1, 8], "x": 11.25, "y": 1},
+ {"matrix": [1, 9], "x": 12.25, "y": 1},
+ {"matrix": [1, 10], "x": 13.25, "y": 1},
+ {"matrix": [1, 11], "x": 14.25, "y": 1},
+ {"matrix": [1, 12], "x": 15.25, "y": 1},
+ {"matrix": [1, 13], "x": 16.25, "y": 1},
+ {"matrix": [1, 14], "x": 17.25, "y": 1, "w": 1.5},
+ {"matrix": [3, 0], "x": 0.25, "y": 2},
+ {"matrix": [2, 1], "x": 2, "y": 2, "w": 1.75},
+ {"matrix": [2, 2], "x": 3.75, "y": 2},
+ {"matrix": [2, 3], "x": 4.75, "y": 2},
+ {"matrix": [2, 4], "x": 5.75, "y": 2},
+ {"matrix": [2, 5], "x": 6.75, "y": 2},
+ {"matrix": [2, 6], "x": 7.75, "y": 2},
+ {"matrix": [2, 7], "x": 10.75, "y": 2},
+ {"matrix": [2, 8], "x": 11.75, "y": 2},
+ {"matrix": [2, 9], "x": 12.75, "y": 2},
+ {"matrix": [2, 10], "x": 13.75, "y": 2},
+ {"matrix": [2, 11], "x": 14.75, "y": 2},
+ {"matrix": [2, 12], "x": 15.75, "y": 2},
+ {"matrix": [2, 14], "x": 16.75, "y": 2, "w": 2.25},
+ {"matrix": [4, 0], "x": 0, "y": 3},
+ {"matrix": [3, 1], "x": 1.75, "y": 3, "w": 2.25},
+ {"matrix": [3, 2], "x": 4, "y": 3},
+ {"matrix": [3, 3], "x": 5, "y": 3},
+ {"matrix": [3, 4], "x": 6, "y": 3},
+ {"matrix": [3, 5], "x": 7, "y": 3},
+ {"matrix": [3, 6], "x": 8, "y": 3},
+ {"matrix": [3, 7], "x": 10.5, "y": 3},
+ {"matrix": [3, 8], "x": 11.5, "y": 3},
+ {"matrix": [3, 9], "x": 12.5, "y": 3},
+ {"matrix": [3, 10], "x": 13.5, "y": 3},
+ {"matrix": [3, 11], "x": 14.5, "y": 3},
+ {"matrix": [3, 12], "x": 15.5, "y": 3},
+ {"matrix": [3, 13], "x": 16.5, "y": 3, "w": 1.25},
+ {"matrix": [3, 14], "x": 17.75, "y": 3},
+ {"matrix": [4, 1], "x": 1.75, "y": 4, "w": 1.5},
+ {"matrix": [4, 3], "x": 5, "y": 4, "w": 1.5},
+ {"matrix": [4, 5], "x": 6.5, "y": 4, "w": 2},
+ {"matrix": [4, 6], "x": 8.5, "y": 4},
+ {"matrix": [4, 7], "x": 10, "y": 4},
+ {"matrix": [4, 8], "x": 11, "y": 4, "w": 2},
+ {"matrix": [4, 10], "x": 13, "y": 4, "w": 1.5},
+ {"matrix": [4, 13], "x": 16.75, "y": 4, "w": 1.5}
+ ]
+ }
+ }
+}
diff --git a/keyboards/cipulot/ec_typek/keymaps/default/keymap.c b/keyboards/cipulot/ec_typek/keymaps/default/keymap.c
new file mode 100644
index 0000000000..e47e50680e
--- /dev/null
+++ b/keyboards/cipulot/ec_typek/keymaps/default/keymap.c
@@ -0,0 +1,41 @@
+/* Copyright 2023 Cipulot
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ // clang-format off
+ [0] = LAYOUT(
+ KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL,
+ KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
+ KC_PGDN, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENTER,
+ KC_LGUI, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1),
+ KC_LCTL, KC_LALT, KC_SPC, KC_LGUI, KC_RGUI, KC_SPC, KC_RALT, MO(1)
+ ),
+ [1] = LAYOUT(
+ _______, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______,
+ KC_HOME, _______, _______, KC_UP, _______, _______, _______, _______, _______, KC_PSCR, KC_SCRL, KC_PAUSE, _______, _______, _______,
+ KC_END, _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, MO(2), _______
+ ),
+ [2] = LAYOUT(
+ QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ NK_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______)
+};
diff --git a/keyboards/cipulot/ec_typek/keymaps/via/keymap.c b/keyboards/cipulot/ec_typek/keymaps/via/keymap.c
new file mode 100644
index 0000000000..e47e50680e
--- /dev/null
+++ b/keyboards/cipulot/ec_typek/keymaps/via/keymap.c
@@ -0,0 +1,41 @@
+/* Copyright 2023 Cipulot
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+ // clang-format off
+ [0] = LAYOUT(
+ KC_ESC, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_DEL,
+ KC_PGUP, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
+ KC_PGDN, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENTER,
+ KC_LGUI, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(1),
+ KC_LCTL, KC_LALT, KC_SPC, KC_LGUI, KC_RGUI, KC_SPC, KC_RALT, MO(1)
+ ),
+ [1] = LAYOUT(
+ _______, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______,
+ KC_HOME, _______, _______, KC_UP, _______, _______, _______, _______, _______, KC_PSCR, KC_SCRL, KC_PAUSE, _______, _______, _______,
+ KC_END, _______, KC_LEFT, KC_DOWN, KC_RIGHT, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, MO(2), _______
+ ),
+ [2] = LAYOUT(
+ QK_BOOT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ NK_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+ _______, _______, _______, _______, _______, _______, _______, _______)
+};
diff --git a/keyboards/cipulot/ec_typek/keymaps/via/rules.mk b/keyboards/cipulot/ec_typek/keymaps/via/rules.mk
new file mode 100644
index 0000000000..b870b6349c
--- /dev/null
+++ b/keyboards/cipulot/ec_typek/keymaps/via/rules.mk
@@ -0,0 +1,3 @@
+VIA_ENABLE = yes
+
+SRC += via_ec_indicators.c
diff --git a/keyboards/cipulot/ec_typek/keymaps/via/via_ec_indicators.c b/keyboards/cipulot/ec_typek/keymaps/via/via_ec_indicators.c
new file mode 100644
index 0000000000..742dac0e6f
--- /dev/null
+++ b/keyboards/cipulot/ec_typek/keymaps/via/via_ec_indicators.c
@@ -0,0 +1,502 @@
+/* Copyright 2023 Cipulot
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+
+#include "keyboards/cipulot/common/eeprom_tools.h"
+#include "ec_switch_matrix.h"
+#include "action.h"
+#include "print.h"
+#include "via.h"
+
+#ifdef VIA_ENABLE
+
+void ec_rescale_values(uint8_t item);
+void ec_save_threshold_data(uint8_t option);
+void ec_save_bottoming_reading(void);
+void ec_show_calibration_data(void);
+void ec_clear_bottoming_calibration_data(void);
+
+// Declaring enums for VIA config menu
+enum via_enums {
+ // clang-format off
+ id_num_indicator_enabled = 1,
+ id_num_indicator_brightness = 2,
+ id_num_indicator_color = 3,
+ id_caps_indicator_enabled = 4,
+ id_caps_indicator_brightness = 5,
+ id_caps_indicator_color = 6,
+ id_scroll_indicator_enabled = 7,
+ id_scroll_indicator_brightness = 8,
+ id_scroll_indicator_color = 9,
+ id_actuation_mode = 10,
+ id_mode_0_actuation_threshold = 11,
+ id_mode_0_release_threshold = 12,
+ id_save_threshold_data = 13,
+ id_mode_1_initial_deadzone_offset = 14,
+ id_mode_1_actuation_offset = 15,
+ id_mode_1_release_offset = 16,
+ id_bottoming_calibration = 17,
+ id_noise_floor_calibration = 18,
+ id_show_calibration_data = 19,
+ id_clear_bottoming_calibration_data = 20
+ // clang-format on
+};
+
+// Handle the data received by the keyboard from the VIA menus
+void via_config_set_value(uint8_t *data) {
+ // data = [ value_id, value_data ]
+ uint8_t *value_id = &(data[0]);
+ uint8_t *value_data = &(data[1]);
+
+ switch (*value_id) {
+ case id_num_indicator_enabled: {
+ if (value_data[0] == 1) {
+ eeprom_ec_config.num.enabled = true;
+ uprintf("#########################\n");
+ uprintf("# Num indicator enabled #\n");
+ uprintf("#########################\n");
+ } else {
+ eeprom_ec_config.num.enabled = false;
+ uprintf("##########################\n");
+ uprintf("# Num indicator disabled #\n");
+ uprintf("##########################\n");
+ }
+ EEPROM_KB_PARTIAL_UPDATE(eeprom_ec_config, num.enabled);
+ break;
+ }
+ case id_num_indicator_brightness: {
+ eeprom_ec_config.num.v = value_data[0];
+ uprintf("Num indicator brightness: %d\n", eeprom_ec_config.num.v);
+ EEPROM_KB_PARTIAL_UPDATE(eeprom_ec_config, num.v);
+ break;
+ }
+ case id_num_indicator_color: {
+ eeprom_ec_config.num.h = value_data[0];
+ eeprom_ec_config.num.s = value_data[1];
+ uprintf("Num indicator color: %d, %d\n", eeprom_ec_config.num.h, eeprom_ec_config.num.s);
+ EEPROM_KB_PARTIAL_UPDATE(eeprom_ec_config, num.h);
+ EEPROM_KB_PARTIAL_UPDATE(eeprom_ec_config, num.s);
+ break;
+ }
+ case id_caps_indicator_enabled: {
+ if (value_data[0] == 1) {
+ eeprom_ec_config.caps.enabled = true;
+ uprintf("##########################\n");
+ uprintf("# Caps indicator enabled #\n");
+ uprintf("##########################\n");
+ } else {
+ eeprom_ec_config.caps.enabled = false;
+ uprintf("###########################\n");
+ uprintf("# Caps indicator disabled #\n");
+ uprintf("###########################\n");
+ }
+ EEPROM_KB_PARTIAL_UPDATE(eeprom_ec_config, caps.enabled);
+ break;
+ }
+ case id_caps_indicator_brightness: {
+ eeprom_ec_config.caps.v = value_data[0];
+ uprintf("Caps indicator brightness: %d\n", eeprom_ec_config.caps.v);
+ EEPROM_KB_PARTIAL_UPDATE(eeprom_ec_config, caps.v);
+ break;
+ }
+ case id_caps_indicator_color: {
+ eeprom_ec_config.caps.h = value_data[0];
+ eeprom_ec_config.caps.s = value_data[1];
+ uprintf("Caps indicator color: %d, %d\n", eeprom_ec_config.caps.h, eeprom_ec_config.caps.s);
+ EEPROM_KB_PARTIAL_UPDATE(eeprom_ec_config, caps.h);
+ EEPROM_KB_PARTIAL_UPDATE(eeprom_ec_config, caps.s);
+ break;
+ }
+ case id_scroll_indicator_enabled: {
+ if (value_data[0] == 1) {
+ eeprom_ec_config.scroll.enabled = true;
+ uprintf("############################\n");
+ uprintf("# Scroll indicator enabled #\n");
+ uprintf("############################\n");
+ } else {
+ eeprom_ec_config.scroll.enabled = false;
+ uprintf("#############################\n");
+ uprintf("# Scroll indicator disabled #\n");
+ uprintf("#############################\n");
+ }
+ EEPROM_KB_PARTIAL_UPDATE(eeprom_ec_config, scroll.enabled);
+ break;
+ }
+ case id_scroll_indicator_brightness: {
+ eeprom_ec_config.scroll.v = value_data[0];
+ uprintf("Scroll indicator brightness: %d\n", eeprom_ec_config.scroll.v);
+ EEPROM_KB_PARTIAL_UPDATE(eeprom_ec_config, scroll.v);
+ break;
+ }
+ case id_scroll_indicator_color: {
+ eeprom_ec_config.scroll.h = value_data[0];
+ eeprom_ec_config.scroll.s = value_data[1];
+ uprintf("Scroll indicator color: %d, %d\n", eeprom_ec_config.scroll.h, eeprom_ec_config.scroll.s);
+ EEPROM_KB_PARTIAL_UPDATE(eeprom_ec_config, scroll.h);
+ EEPROM_KB_PARTIAL_UPDATE(eeprom_ec_config, scroll.s);
+ break;
+ }
+ case id_actuation_mode: {
+ eeprom_ec_config.actuation_mode = value_data[0];
+ ec_config.actuation_mode = eeprom_ec_config.actuation_mode;
+ if (ec_config.actuation_mode == 0) {
+ uprintf("#########################\n");
+ uprintf("# Actuation Mode: APC #\n");
+ uprintf("#########################\n");
+ } else if (ec_config.actuation_mode == 1) {
+ uprintf("#################################\n");
+ uprintf("# Actuation Mode: Rapid Trigger #\n");
+ uprintf("#################################\n");
+ }
+ EEPROM_KB_PARTIAL_UPDATE(eeprom_ec_config, actuation_mode);
+ break;
+ }
+ case id_mode_0_actuation_threshold: {
+ ec_config.mode_0_actuation_threshold = value_data[1] | (value_data[0] << 8);
+ uprintf("APC Mode Actuation Threshold: %d\n", ec_config.mode_0_actuation_threshold);
+ break;
+ }
+ case id_mode_0_release_threshold: {
+ eeprom_ec_config.mode_0_release_threshold = value_data[1] | (value_data[0] << 8);
+ ec_config.mode_0_release_threshold = eeprom_ec_config.mode_0_release_threshold;
+ uprintf("APC Mode Release Threshold: %d\n", ec_config.mode_0_release_threshold);
+ break;
+ }
+ case id_mode_1_initial_deadzone_offset: {
+ ec_config.mode_1_initial_deadzone_offset = value_data[1] | (value_data[0] << 8);
+ uprintf("Rapid Trigger Mode Initial Deadzone Offset: %d\n", ec_config.mode_1_initial_deadzone_offset);
+ break;
+ }
+ case id_mode_1_actuation_offset: {
+ ec_config.mode_1_actuation_offset = value_data[0];
+ uprintf("Rapid Trigger Mode Actuation Sensitivity: %d\n", ec_config.mode_1_actuation_offset);
+ break;
+ }
+ case id_mode_1_release_offset: {
+ ec_config.mode_1_release_offset = value_data[0];
+ uprintf("Rapid Trigger Mode Release Sensitivity: %d\n", ec_config.mode_1_release_offset);
+ break;
+ }
+ case id_bottoming_calibration: {
+ if (value_data[0] == 1) {
+ ec_config.bottoming_calibration = true;
+ uprintf("##############################\n");
+ uprintf("# Bottoming calibration mode #\n");
+ uprintf("##############################\n");
+ } else {
+ ec_config.bottoming_calibration = false;
+ ec_save_bottoming_reading();
+ uprintf("## Bottoming calibration done ##\n");
+ ec_show_calibration_data();
+ }
+ break;
+ }
+ case id_save_threshold_data: {
+ ec_save_threshold_data(value_data[0]);
+ break;
+ }
+ case id_noise_floor_calibration: {
+ if (value_data[0] == 0) {
+ ec_noise_floor();
+ ec_rescale_values(0);
+ ec_rescale_values(1);
+ ec_rescale_values(2);
+ uprintf("#############################\n");
+ uprintf("# Noise floor data acquired #\n");
+ uprintf("#############################\n");
+ break;
+ }
+ }
+ case id_show_calibration_data: {
+ // Show calibration data once if the user toggle the switch
+ if (value_data[0] == 0) {
+ ec_show_calibration_data();
+ break;
+ }
+ }
+ case id_clear_bottoming_calibration_data: {
+ if (value_data[0] == 0) {
+ ec_clear_bottoming_calibration_data();
+ }
+ }
+ default: {
+ // Unhandled value.
+ break;
+ }
+ }
+
+ // Call the indicator callback to set the indicator color
+ indicators_callback();
+}
+
+// Handle the data sent by the keyboard to the VIA menus
+void via_config_get_value(uint8_t *data) {
+ // data = [ value_id, value_data ]
+ uint8_t *value_id = &(data[0]);
+ uint8_t *value_data = &(data[1]);
+
+ switch (*value_id) {
+ case id_num_indicator_enabled: {
+ value_data[0] = eeprom_ec_config.num.enabled;
+ break;
+ }
+ case id_num_indicator_brightness: {
+ value_data[0] = eeprom_ec_config.num.v;
+ break;
+ }
+ case id_num_indicator_color: {
+ value_data[0] = eeprom_ec_config.num.h;
+ value_data[1] = eeprom_ec_config.num.s;
+ break;
+ }
+ case id_caps_indicator_enabled: {
+ value_data[0] = eeprom_ec_config.caps.enabled;
+ break;
+ }
+ case id_caps_indicator_brightness: {
+ value_data[0] = eeprom_ec_config.caps.v;
+ break;
+ }
+ case id_caps_indicator_color: {
+ value_data[0] = eeprom_ec_config.caps.h;
+ value_data[1] = eeprom_ec_config.caps.s;
+ break;
+ }
+ case id_scroll_indicator_enabled: {
+ value_data[0] = eeprom_ec_config.scroll.enabled;
+ break;
+ }
+ case id_scroll_indicator_brightness: {
+ value_data[0] = eeprom_ec_config.scroll.v;
+ break;
+ }
+ case id_scroll_indicator_color: {
+ value_data[0] = eeprom_ec_config.scroll.h;
+ value_data[1] = eeprom_ec_config.scroll.s;
+ break;
+ }
+ case id_actuation_mode: {
+ value_data[0] = eeprom_ec_config.actuation_mode;
+ break;
+ }
+ case id_mode_0_actuation_threshold: {
+ value_data[0] = eeprom_ec_config.mode_0_actuation_threshold >> 8;
+ value_data[1] = eeprom_ec_config.mode_0_actuation_threshold & 0xFF;
+ break;
+ }
+ case id_mode_0_release_threshold: {
+ value_data[0] = eeprom_ec_config.mode_0_release_threshold >> 8;
+ value_data[1] = eeprom_ec_config.mode_0_release_threshold & 0xFF;
+ break;
+ }
+ case id_mode_1_initial_deadzone_offset: {
+ value_data[0] = eeprom_ec_config.mode_1_initial_deadzone_offset >> 8;
+ value_data[1] = eeprom_ec_config.mode_1_initial_deadzone_offset & 0xFF;
+ break;
+ }
+ case id_mode_1_actuation_offset: {
+ value_data[0] = eeprom_ec_config.mode_1_actuation_offset;
+ break;
+ }
+ case id_mode_1_release_offset: {
+ value_data[0] = eeprom_ec_config.mode_1_release_offset;
+ break;
+ }
+ default: {
+ // Unhandled value.
+ break;
+ }
+ }
+}
+
+// Handle the commands sent and received by the keyboard with VIA
+void via_custom_value_command_kb(uint8_t *data, uint8_t length) {
+ // data = [ command_id, channel_id, value_id, value_data ]
+ uint8_t *command_id = &(data[0]);
+ uint8_t *channel_id = &(data[1]);
+ uint8_t *value_id_and_data = &(data[2]);
+
+ if (*channel_id == id_custom_channel) {
+ switch (*command_id) {
+ case id_custom_set_value: {
+ via_config_set_value(value_id_and_data);
+ break;
+ }
+ case id_custom_get_value: {
+ via_config_get_value(value_id_and_data);
+ break;
+ }
+ case id_custom_save: {
+ // Bypass the save function in favor of pinpointed saves
+ break;
+ }
+ default: {
+ // Unhandled message.
+ *command_id = id_unhandled;
+ break;
+ }
+ }
+ return;
+ }
+
+ *command_id = id_unhandled;
+}
+
+// Rescale the values received by VIA to fit the new range
+void ec_rescale_values(uint8_t item) {
+ switch (item) {
+ // Rescale the APC mode actuation thresholds
+ case 0:
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+ ec_config.rescaled_mode_0_actuation_threshold[row][col] = rescale(ec_config.mode_0_actuation_threshold, 0, 1023, ec_config.noise_floor[row][col], eeprom_ec_config.bottoming_reading[row][col]);
+ }
+ }
+ break;
+ // Rescale the APC mode release thresholds
+ case 1:
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+ ec_config.rescaled_mode_0_release_threshold[row][col] = rescale(ec_config.mode_0_release_threshold, 0, 1023, ec_config.noise_floor[row][col], eeprom_ec_config.bottoming_reading[row][col]);
+ }
+ }
+ break;
+ // Rescale the Rapid Trigger mode initial deadzone offsets
+ case 2:
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+ ec_config.rescaled_mode_1_initial_deadzone_offset[row][col] = rescale(ec_config.mode_1_initial_deadzone_offset, 0, 1023, ec_config.noise_floor[row][col], eeprom_ec_config.bottoming_reading[row][col]);
+ }
+ }
+ break;
+
+ default:
+ // Unhandled item.
+ break;
+ }
+}
+
+void ec_save_threshold_data(uint8_t option) {
+ // Save APC mode thresholds and rescale them for runtime usage
+ if (option == 0) {
+ eeprom_ec_config.mode_0_actuation_threshold = ec_config.mode_0_actuation_threshold;
+ eeprom_ec_config.mode_0_release_threshold = ec_config.mode_0_release_threshold;
+ ec_rescale_values(0);
+ ec_rescale_values(1);
+ }
+ // Save Rapid Trigger mode thresholds and rescale them for runtime usage
+ else if (option == 1) {
+ eeprom_ec_config.mode_1_initial_deadzone_offset = ec_config.mode_1_initial_deadzone_offset;
+ ec_rescale_values(2);
+ }
+ eeconfig_update_kb_datablock(&eeprom_ec_config);
+ uprintf("####################################\n");
+ uprintf("# New thresholds applied and saved #\n");
+ uprintf("####################################\n");
+}
+
+// Save the bottoming reading
+void ec_save_bottoming_reading(void) {
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ for (uint8_t col = 0; col < MATRIX_COLS; col++) {
+ // If the bottom reading doesn't go over the noise floor by 100, it is likely that:
+ // 1. The key is not actually in the matrix
+ // 2. The key is on an alternative layout, therefore not being pressed
+ // 3. The key in in the current layout but not being pressed
+ if (ec_config.bottoming_reading[row][col] < (ec_config.noise_floor[row][col] + 100)) {
+ eeprom_ec_config.bottoming_reading[row][col] = 1023;
+ } else {
+ eeprom_ec_config.bottoming_reading[row][col] = ec_config.bottoming_reading[row][col];
+ }
+ }
+ }
+ // Rescale the values to fit the new range for runtime usage
+ ec_rescale_values(0);
+ ec_rescale_values(1);
+ ec_rescale_values(2);
+ eeconfig_update_kb_datablock(&eeprom_ec_config);
+}
+
+// Show the calibration data
+void ec_show_calibration_data(void) {
+ uprintf("\n###############\n");
+ uprintf("# Noise Floor #\n");
+ uprintf("###############\n");
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ for (uint8_t col = 0; col < MATRIX_COLS - 1; col++) {
+ uprintf("%4d,", ec_config.noise_floor[row][col]);
+ }
+ uprintf("%4d\n", ec_config.noise_floor[row][MATRIX_COLS - 1]);
+ }
+
+ uprintf("\n######################\n");
+ uprintf("# Bottoming Readings #\n");
+ uprintf("######################\n");
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ for (uint8_t col = 0; col < MATRIX_COLS - 1; col++) {
+ uprintf("%4d,", eeprom_ec_config.bottoming_reading[row][col]);
+ }
+ uprintf("%4d\n", eeprom_ec_config.bottoming_reading[row][MATRIX_COLS - 1]);
+ }
+
+ uprintf("\n######################################\n");
+ uprintf("# Rescaled APC Mode Actuation Points #\n");
+ uprintf("######################################\n");
+ uprintf("Original APC Mode Actuation Point: %4d\n", ec_config.mode_0_actuation_threshold);
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ for (uint8_t col = 0; col < MATRIX_COLS - 1; col++) {
+ uprintf("%4d,", ec_config.rescaled_mode_0_actuation_threshold[row][col]);
+ }
+ uprintf("%4d\n", ec_config.rescaled_mode_0_actuation_threshold[row][MATRIX_COLS - 1]);
+ }
+
+ uprintf("\n######################################\n");
+ uprintf("# Rescaled APC Mode Release Points #\n");
+ uprintf("######################################\n");
+ uprintf("Original APC Mode Release Point: %4d\n", ec_config.mode_0_release_threshold);
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ for (uint8_t col = 0; col < MATRIX_COLS - 1; col++) {
+ uprintf("%4d,", ec_config.rescaled_mode_0_release_threshold[row][col]);
+ }
+ uprintf("%4d\n", ec_config.rescaled_mode_0_release_threshold[row][MATRIX_COLS - 1]);
+ }
+
+ uprintf("\n#######################################################\n");
+ uprintf("# Rescaled Rapid Trigger Mode Initial Deadzone Offset #\n");
+ uprintf("#######################################################\n");
+ uprintf("Original Rapid Trigger Mode Initial Deadzone Offset: %4d\n", ec_config.mode_1_initial_deadzone_offset);
+ for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+ for (uint8_t col = 0; col < MATRIX_COLS - 1; col++) {
+ uprintf("%4d,", ec_config.rescaled_mode_1_initial_deadzone_offset[row][col]);
+ }
+ uprintf("%4d\n", ec_config.rescaled_mode_1_initial_deadzone_offset[row][MATRIX_COLS - 1]);
+ }
+ print("\n");
+}
+
+// Clear the calibration data
+void ec_clear_bottoming_calibration_data(void) {
+ // Clear the EEPROM data
+ eeconfig_init_kb();
+
+ // Reset the runtime values to the EEPROM values
+ keyboard_post_init_kb();
+
+ uprintf("######################################\n");
+ uprintf("# Bottoming calibration data cleared #\n");
+ uprintf("######################################\n");
+}
+
+#endif // VIA_ENABLE
diff --git a/keyboards/cipulot/ec_typek/matrix.c b/keyboards/cipulot/ec_typek/matrix.c
new file mode 100644
index 0000000000..cfa2efe050
--- /dev/null
+++ b/keyboards/cipulot/ec_typek/matrix.c
@@ -0,0 +1,42 @@
+/* Copyright 2023 Cipulot
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+
+#include "ec_switch_matrix.h"
+#include "matrix.h"
+
+extern matrix_row_t raw_matrix[MATRIX_ROWS]; // raw values
+extern matrix_row_t matrix[MATRIX_ROWS]; // debounced values
+
+// Custom matrix init function
+void matrix_init_custom(void) {
+ // Initialize EC
+ ec_init();
+
+ // Get the noise floor at boot
+ ec_noise_floor();
+}
+
+// Custom matrix scan function
+bool matrix_scan_custom(matrix_row_t current_matrix[]) {
+ bool updated = ec_matrix_scan(current_matrix);
+
+ return updated;
+}
+
+// Bootmagic overriden to avoid conflicts with EC
+void bootmagic_scan(void) {
+ ;
+}
diff --git a/keyboards/cipulot/ec_typek/mcuconf.h b/keyboards/cipulot/ec_typek/mcuconf.h
new file mode 100644
index 0000000000..5f9ecca48d
--- /dev/null
+++ b/keyboards/cipulot/ec_typek/mcuconf.h
@@ -0,0 +1,28 @@
+/* Copyright 2023 Cipulot
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ */
+
+#pragma once
+
+#include_next
+
+#undef STM32_ADC_USE_ADC1
+#define STM32_ADC_USE_ADC1 TRUE
+
+#undef STM32_PWM_USE_ADVANCED
+#define STM32_PWM_USE_ADVANCED TRUE
+
+#undef STM32_PWM_USE_TIM1
+#define STM32_PWM_USE_TIM1 TRUE
diff --git a/keyboards/cipulot/ec_typek/readme.md b/keyboards/cipulot/ec_typek/readme.md
new file mode 100644
index 0000000000..44f6fd8944
--- /dev/null
+++ b/keyboards/cipulot/ec_typek/readme.md
@@ -0,0 +1,26 @@
+# EC Type-K
+
+
+
+EC Type-K Keyboard by gok.
+
+* Keyboard Maintainer: [cipulot](https://github.com/cipulot)
+* Hardware Supported: EC Type-K
+* Hardware Availability: [gok](https://www.gok.design/)
+
+Make example for this keyboard (after setting up your build environment):
+
+ make cipulot/ec_typek:default
+
+Flashing example for this keyboard:
+
+ make cipulot/ec_typek:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 2 ways:
+
+* **Physical Boot0 pins**: Short the Boot0 pins on the back of the PCB while plugging in the keyboard
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available
diff --git a/keyboards/cipulot/ec_typek/rules.mk b/keyboards/cipulot/ec_typek/rules.mk
new file mode 100644
index 0000000000..1ff311f102
--- /dev/null
+++ b/keyboards/cipulot/ec_typek/rules.mk
@@ -0,0 +1,4 @@
+CUSTOM_MATRIX = lite
+ANALOG_DRIVER_REQUIRED = yes
+SRC += matrix.c ec_switch_matrix.c
+OPT = 2