diff --git a/keyboards/slz40/config.h b/keyboards/slz40/config.h new file mode 100644 index 0000000000..cc868e4c0c --- /dev/null +++ b/keyboards/slz40/config.h @@ -0,0 +1,146 @@ +/* +Copyright 2020 SithLord + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x0000 +#define DEVICE_VER 0x0001 +#define MANUFACTURER SithLord +#define PRODUCT slz40 + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 12 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * + */ +#define MATRIX_ROW_PINS { B4, B5, B3, B2, B6 } +#define MATRIX_COL_PINS { F4, D2, F5, D1, F6, D0, F7, D4, B1, C6, E6, D7 } +#define UNUSED_PINS + +/* COL2ROW, ROW2COL */ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +//#define BACKLIGHT_PIN B7 +//#define BACKLIGHT_LEVELS 3 +//#define BACKLIGHT_BREATHING + +//#define RGB_DI_PIN E2 +//#ifdef RGB_DI_PIN +//# define RGBLED_NUM 16 +//# define RGBLIGHT_HUE_STEP 8 +//# define RGBLIGHT_SAT_STEP 8 +//# define RGBLIGHT_VAL_STEP 8 +//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +/*== all animations enable ==*/ +//# define RGBLIGHT_ANIMATIONS +/*== or choose animations ==*/ +//# define RGBLIGHT_EFFECT_BREATHING +//# define RGBLIGHT_EFFECT_RAINBOW_MOOD +//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL +//# define RGBLIGHT_EFFECT_SNAKE +//# define RGBLIGHT_EFFECT_KNIGHT +//# define RGBLIGHT_EFFECT_CHRISTMAS +//# define RGBLIGHT_EFFECT_STATIC_GRADIENT +//# define RGBLIGHT_EFFECT_RGB_TEST +//# define RGBLIGHT_EFFECT_ALTERNATING +/*== customize breathing effect ==*/ +/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/ +//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64 +/*==== use exp() and sin() ====*/ +//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7 +//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255 +//#endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCE 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is useful for the Windows task manager shortcut (ctrl+shift+esc). + */ +//#define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT + +/* disable these deprecated features by default */ +#define NO_ACTION_MACRO +#define NO_ACTION_FUNCTION + +/* Bootmagic Lite key configuration */ +//#define BOOTMAGIC_LITE_ROW 0 +//#define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/slz40/info.json b/keyboards/slz40/info.json new file mode 100644 index 0000000000..2723453c4e --- /dev/null +++ b/keyboards/slz40/info.json @@ -0,0 +1,76 @@ +{ + "keyboard_name": "slz40", + "url": "https://github.com/sithlord121/slz40", + "maintainer": "SithLord", + "width": 13, + "height": 5, + "layouts": { + "LAYOUT": { + "layout": [ + {"label": "1", "x": 0.5, "y": 0}, + {"label": "2", "x": 1.5, "y": 0}, + {"label": "3", "x": 2.5, "y": 0}, + {"label": "4", "x": 3.5, "y": 0}, + {"label": "5", "x": 4.5, "y": 0}, + {"label": "6", "x": 5.5, "y": 0}, + {"label": "7", "x": 6.5, "y": 0}, + {"label": "8", "x": 7.5, "y": 0}, + {"label": "9", "x": 8.5, "y": 0}, + {"label": "0", "x": 9.5, "y": 0}, + {"label": "-", "x": 10.5, "y": 0}, + + {"label": "esc", "x": 0, "y": 1}, + {"label": "q", "x": 1, "y": 1}, + {"label": "w", "x": 2, "y": 1}, + {"label": "e", "x": 3, "y": 1}, + {"label": "r", "x": 4, "y": 1}, + {"label": "t", "x": 5, "y": 1}, + {"label": "y", "x": 6, "y": 1}, + {"label": "u", "x": 7, "y": 1}, + {"label": "i", "x": 8, "y": 1}, + {"label": "o", "x": 9, "y": 1}, + {"label": "p", "x": 10, "y": 1}, + {"label": "/", "x": 11, "y": 1}, + {"label": "bs", "x": 12, "y": 1}, + + {"label": "tab", "x": 0, "y": 2, "w": 1.25}, + {"label": "a", "x": 1.25, "y": 2}, + {"label": "s", "x": 2.25, "y": 2}, + {"label": "d", "x": 3.25, "y": 2}, + {"label": "f", "x": 4.25, "y": 2}, + {"label": "g", "x": 5.25, "y": 2}, + {"label": "h", "x": 6.25, "y": 2}, + {"label": "j", "x": 7.25, "y": 2}, + {"label": "k", "x": 8.25, "y": 2}, + {"label": "l", "x": 9.25, "y": 2}, + {"label": ";", "x": 10.25, "y": 2}, + {"label": "enter", "x": 11.25, "y": 2, "w": 1.75}, + + {"label": "lshift", "x": 0, "y": 3, "w": 1.75}, + {"label": "z", "x": 1.75, "y": 3}, + {"label": "x", "x": 2.75, "y": 3}, + {"label": "c", "x": 3.75, "y": 3}, + {"label": "v", "x": 4.75, "y": 3}, + {"label": "b", "x": 5.75, "y": 3}, + {"label": "n", "x": 6.75, "y": 3}, + {"label": "m", "x": 7.75, "y": 3}, + {"label": ",", "x": 8.75, "y": 3}, + {"label": ".", "x": 9.75, "y": 3}, + {"label": "up", "x": 10.75, "y": 3}, + {"label": "rshift", "x": 11.75, "y": 3, "w": 1.25}, + + {"label": "ctrl", "x": 0, "y": 4, "w": 1.25}, + {"label": "qui", "x": 1.25, "y": 4, "w": 1.25}, + {"label": "alt", "x": 2.50, "y": 4, "w": 1.25}, + {"label": "del", "x": 3.75, "y": 4, "w": 1.25}, + {"label": "enter", "x": 5, "y": 4, "w": 1.75}, + {"label": "space", "x": 6.75, "y": 4, "w": 1.75}, + {"label": "'", "x": 8.50, "y": 4, "w": 1.5}, + {"label": "left", "x": 10, "y": 4}, + {"label": "down", "x": 11, "y": 4}, + {"label": "right", "x": 12, "y": 4} + + ] + } + } +} diff --git a/keyboards/slz40/keymaps/default/keymap.c b/keyboards/slz40/keymaps/default/keymap.c new file mode 100644 index 0000000000..9212d792e8 --- /dev/null +++ b/keyboards/slz40/keymaps/default/keymap.c @@ -0,0 +1,48 @@ +/* Copyright 2020 SithLord + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// Defines names for use in layer keycodes and the keymap +enum layer_names { + _BASE, + _FN, + _FN2 +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* Base */ + [_BASE] = LAYOUT( + KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, + KC_GESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_SLSH, KC_BSPC, + LT(_FN, KC_TAB), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, LT(_FN,KC_ENT), + KC_LSPO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_UP, KC_RSPC, + KC_LCTL, KC_LGUI, KC_LALT, LT(_FN2, KC_DEL), LT(_FN2, KC_ENTER), KC_SPACE, KC_QUOT, KC_LEFT, KC_DOWN, KC_RIGHT + ), + [_FN] = LAYOUT( + KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_SLSH, KC_BSPC, + KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_PIPE, KC_MINS, KC_EQL, KC_NO, KC_BSLS, KC_TRNS, + KC_LSFT, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_LBRC, KC_RBRC, KC_COMM, KC_DOT, KC_PGUP, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_TRNS, KC_TRNS, KC_SPACE, KC_QUOT, KC_HOME, KC_PGDN, KC_END + ), + [_FN2] = LAYOUT( + KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, RESET, + KC_ESC, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_PIPE, KC_BSPC, + KC_TAB, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_BSLS, KC_UNDS, KC_PLUS, KC_NO, KC_NO, KC_ENT, + KC_LSFT, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_LCBR, KC_RCBR, KC_COMM, KC_DOT, KC_VOLU, KC_RSFT, + KC_LCTL, KC_LGUI, KC_LALT, KC_TRNS, KC_TRNS, KC_SPACE, KC_QUOT, KC_HOME, KC_VOLD, KC_END + ) +}; diff --git a/keyboards/slz40/keymaps/default/readme.md b/keyboards/slz40/keymaps/default/readme.md new file mode 100644 index 0000000000..e9b38ab415 --- /dev/null +++ b/keyboards/slz40/keymaps/default/readme.md @@ -0,0 +1 @@ +# The default keymap for slz40 diff --git a/keyboards/slz40/readme.md b/keyboards/slz40/readme.md new file mode 100644 index 0000000000..d710f597f9 --- /dev/null +++ b/keyboards/slz40/readme.md @@ -0,0 +1,19 @@ +# slz40 + +![SLZ40](https://imgur.com/kgXfEBR.jpg) + +PCB and keymap files for the SLZ40, a 40s style keyboard with numbers for Zhuyin input. + +* Keyboard Maintainer: [SithLord](https://github.com/sithlord121/slz40) +* Hardware Supported: ProMicro or similar controller is required. +* Hardware Availability: PCB files can be found at https://github.com/sithlord121/slz40 + +Make example for this keyboard (after setting up your build environment): + + make slz40:default + +Flashing example for this keyboard: + + make slz40:default:flash + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/slz40/rules.mk b/keyboards/slz40/rules.mk new file mode 100644 index 0000000000..5c0d8f307c --- /dev/null +++ b/keyboards/slz40/rules.mk @@ -0,0 +1,22 @@ +# MCU name +MCU = atmega32u4 + +# Bootloader selection +BOOTLOADER = atmel-dfu + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration +MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = no # USB Nkey Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +BLUETOOTH_ENABLE = no # Enable Bluetooth +AUDIO_ENABLE = no # Audio output diff --git a/keyboards/slz40/slz40.c b/keyboards/slz40/slz40.c new file mode 100644 index 0000000000..261b0bd892 --- /dev/null +++ b/keyboards/slz40/slz40.c @@ -0,0 +1,17 @@ +/* Copyright 2020 SithLord + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "slz40.h" diff --git a/keyboards/slz40/slz40.h b/keyboards/slz40/slz40.h new file mode 100644 index 0000000000..88e7178c62 --- /dev/null +++ b/keyboards/slz40/slz40.h @@ -0,0 +1,41 @@ +/* Copyright 2020 SithLord + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +/* This is a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ +#define LAYOUT( \ + k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, \ + k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k0b, k1b, \ + k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b, \ + k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b, \ + k40, k41, k42, k43, k44, k46, k48, k49, k4a, k4b \ +) { \ + { k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0a, k0b }, \ + { k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b }, \ + { k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2a, k2b }, \ + { k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3a, k3b }, \ + { k40, k41, k42, k43, k44, KC_NO, k46, KC_NO, k48, k49, k4a, k4b } \ +}