qmk_firmware/keyboards/qwertyydox/config.h

/*
Copyright 2018 Ayden <aydenvis@gmail.com>

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

#pragma once

#include "config_common.h"

/* USB Device descriptor parameter */
#define VENDOR_ID       0xCEEB
#define PRODUCT_ID      0x1256
#define DEVICE_VER      0x0100
#define MANUFACTURER    AYDENandDAD Youtube
#define PRODUCT         QWERTYYdox

/* key matrix size */
// Rows are doubled-up
#define MATRIX_ROWS 8
#define MATRIX_COLS 7

/*
 * Keyboard Matrix Assignments
 *
 * Change this to how you wired your keyboard
 * COLS: AVR pins used for columns, left to right
 * ROWS: AVR pins used for rows, top to bottom
 * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
 *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
 *
*/
// wiring of each half
#define MATRIX_ROW_PINS { B6, B2, B3, B1 }
#define MATRIX_COL_PINS { F7, F6, F5, C6, D7, D4, D1 }

/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW

/*
 * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
 */
#define SOFT_SERIAL_PIN D0

// #define BACKLIGHT_PIN E6
// #define BACKLIGHT_BREATHING
// #define BACKLIGHT_LEVELS 5

#define RGB_DI_PIN D6
#ifdef RGB_DI_PIN
    #define RGBLED_NUM 12
    #define RGBLIGHT_HUE_STEP 8
    #define RGBLIGHT_SAT_STEP 8
    #define RGBLIGHT_VAL_STEP 8
    #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
    #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
    /*== all animations enable ==*/
    #define RGBLIGHT_ANIMATIONS
    // /*== or choose animations ==*/
    //     #define RGBLIGHT_EFFECT_BREATHING
    //     #define RGBLIGHT_EFFECT_RAINBOW_MOOD
    //     #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
    //     #define RGBLIGHT_EFFECT_SNAKE
    //     #define RGBLIGHT_EFFECT_KNIGHT
    //     #define RGBLIGHT_EFFECT_CHRISTMAS
    //     #define RGBLIGHT_EFFECT_STATIC_GRADIENT
    //     #define RGBLIGHT_EFFECT_RGB_TEST
    //     #define RGBLIGHT_EFFECT_ALTERNATING
    // /*== customize breathing effect ==*/
    //     /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
    //     #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
    //     /*==== use exp() and sin() ====*/
    //     #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
    //     #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
#endif

/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5

/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST

/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE

/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
 * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
 */
// #define GRAVE_ESC_CTRL_OVERRIDE

/*
 * Force NKRO
 *
 * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
 * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
 * makefile for this to work.)
 *
 * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
 * until the next keyboard reset.
 *
 * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
 * fully operational during normal computer usage.
 *
 * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
 * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
 * bootmagic, NKRO mode will always be enabled until it is toggled again during a
 * power-up.
 *
 */
//#define FORCE_NKRO

#define MOUSEKEY_DELAY             150
#define MOUSEKEY_INTERVAL          20
#define MOUSEKEY_MAX_SPEED         10
#define MOUSEKEY_TIME_TO_MAX       10
#define MOUSEKEY_WHEEL_MAX_SPEED   8
#define MOUSEKEY_WHEEL_TIME_TO_MAX 40

/*
 * Feature disable options
 *  These options are also useful to firmware size reduction.
 */

/* disable debug print */
// #define NO_DEBUG

/* disable print */
// #define NO_PRINT

/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION

/* Bootmagic Lite key configuration */
// #define BOOTMAGIC_LITE_ROW 0
// #define BOOTMAGIC_LITE_COLUMN 0