makeup changes, replaced the 2 new pictures
BubblesToTheLimit
parent
252d00b51e
commit
ebbfbf33bf
131
guide/README.org
131
guide/README.org
|
|
@ -1,74 +1,77 @@
|
|||
* Preparation and Cost
|
||||
Get all the parts / raw material
|
||||
- For the 3D printing there are two options:
|
||||
1. Filament, which is the basis for 3D printing. Luckily I could print at my work-place
|
||||
which reduced the cost from 210€ to 70€. The kind of filament you need depends on the 3D
|
||||
printer you have available.
|
||||
2. Buy the printout of adareth's model at shapeways for 210€ over here
|
||||
http://www.shapeways.com/designer/adereth/creations
|
||||
- Decide on the switches
|
||||
- If you are going to invest a whole lot of time and money for a custom keyboard instead of
|
||||
buying one for 10€ I'd recommend to use your favorite switch-type. To make a
|
||||
well-informed decision I bought a switch-tester for this from massdrop and decided on
|
||||
Cherry MX Whites. https://www.massdrop.com/buy/varmilo-switch-tester-with-anodized-case
|
||||
- I ordered 70 Cherry MX Whites from here:
|
||||
https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=847
|
||||
- Decide on the key caps
|
||||
- On the glamour-Shot you can see the 1976 keycap set, it used to be sold over here:
|
||||
http://pimpmykeyboard.com/sa-1976-keycap-set/ but the link is dead right now. You could
|
||||
try this link: https://www.massdrop.com/buy/nineteenseventysix-sa-keycap-set but it is a
|
||||
massdrop which is way different from usual online-stores. If you find a site that sells
|
||||
these make sure you get the right amount and type of keys according to the layout
|
||||
- I got the "TKL Base Set + TKL Modifier" from over here:
|
||||
http://pimpmykeyboard.com/dsa-pbt-abs-blank-keycap-sets/ but I'm still two long keys
|
||||
short, I will have to order those specifically and I have a bunch of keys I don't use
|
||||
left-over.
|
||||
- The USB-Cable that connects the keyboard to your computer
|
||||
- It's an USB 2.0 to USB Mini-B cable, make sure you get one that is 2 meters long, it
|
||||
really makes handling the keyboard so much more comfortable
|
||||
- https://www.amazon.de/gp/product/B00NH11N5A/
|
||||
- The main controller (right half)
|
||||
- A Teensy 2.0, I got that one from here: https://www.pjrc.com/store/teensy.html
|
||||
- The chip, connectors and cable to give life to the left half
|
||||
- TTRS cable and jacks
|
||||
- Got my TTRS cable from here: http://www.digikey.de/product-search/de?keywords=839-1257-ND
|
||||
- Got my TTRS jacks from here: http://www.digikey.de/product-search/de?keywords=CP-43514-ND
|
||||
- MCP23018 16 bit IO Expander
|
||||
- Got mine from here: http://www.digikey.de/product-search/de?keywords=MCP23018-E%2FSP-ND
|
||||
Get all the parts / raw material
|
||||
- For the 3D printing there are two options:
|
||||
1. Filament, which is the basis for 3D printing. Luckily I could print at my work-place
|
||||
which reduced the cost from 210€ to 70€. The kind of filament you need depends on the 3D
|
||||
printer you have available.
|
||||
2. Buy the printout of adareth's model at shapeways for 210€ over here
|
||||
http://www.shapeways.com/designer/adereth/creations
|
||||
- Decide on the switches
|
||||
- If you are going to invest a whole lot of time and money for a custom keyboard instead of
|
||||
buying one for 10€ I'd recommend to use your favorite switch-type. To make a
|
||||
well-informed decision I bought a switch-tester for this from massdrop and decided on
|
||||
Cherry MX Whites. https://www.massdrop.com/buy/varmilo-switch-tester-with-anodized-case
|
||||
- I ordered 70 Cherry MX Whites from here:
|
||||
https://mechanicalkeyboards.com/shop/index.php?l=product_detail&p=847
|
||||
- Decide on the key caps
|
||||
- On the glamour-Shot you can see the 1976 keycap set, it used to be sold over here:
|
||||
http://pimpmykeyboard.com/sa-1976-keycap-set/ but the link is dead right now. You could
|
||||
try this link: https://www.massdrop.com/buy/nineteenseventysix-sa-keycap-set but it is a
|
||||
massdrop which is way different from usual online-stores. If you find a site that sells
|
||||
these make sure you get the right amount and type of keys according to the layout
|
||||
- I got the "TKL Base Set + TKL Modifier" from over here:
|
||||
http://pimpmykeyboard.com/dsa-pbt-abs-blank-keycap-sets/ but I'm still two long keys
|
||||
short, I will have to order those specifically and I have a bunch of keys I don't use
|
||||
left-over.
|
||||
- The USB-Cable that connects the keyboard to your computer
|
||||
- It's an USB 2.0 to USB Mini-B cable, make sure you get one that is 2 meters long, it
|
||||
really makes handling the keyboard so much more comfortable
|
||||
- https://www.amazon.de/gp/product/B00NH11N5A/
|
||||
- The main controller (right half)
|
||||
- A Teensy 2.0, I got that one from here: https://www.pjrc.com/store/teensy.html
|
||||
- The chip, connectors and cable to give life to the left half
|
||||
- TTRS cable and jacks
|
||||
- Got my TTRS cable from here: http://www.digikey.de/product-search/de?keywords=839-1257-ND
|
||||
- Got my TTRS jacks from here: http://www.digikey.de/product-search/de?keywords=CP-43514-ND
|
||||
- MCP23018 16 bit IO Expander
|
||||
- Got mine from here: http://www.digikey.de/product-search/de?keywords=MCP23018-E%2FSP-ND
|
||||
|
||||
What I spend on my keyboard (should give you a rough estimate for your build):
|
||||
| item | cost |
|
||||
|-----------------------------------+------|
|
||||
| filament | 70 |
|
||||
| switch-tester | 30 |
|
||||
| key-caps | 70 |
|
||||
| teensy 2.0 | 30 |
|
||||
| switches | 60 |
|
||||
| usb cable | 10 |
|
||||
| IO Expander, TTRS jacks and cable | 30 |
|
||||
|-----------------------------------+------|
|
||||
| overall cost | 300 |
|
||||
#+TBLFM: @9$2=vsum(@2$2..@8$2)
|
||||
What I spend on my keyboard (should give you a rough estimate for your build):
|
||||
| item | cost |
|
||||
|-----------------------------------+------|
|
||||
| filament | 70 |
|
||||
| switch-tester | 30 |
|
||||
| key-caps | 70 |
|
||||
| teensy 2.0 | 30 |
|
||||
| switches | 60 |
|
||||
| usb cable | 10 |
|
||||
| IO Expander, TTRS jacks and cable | 30 |
|
||||
|-----------------------------------+------|
|
||||
| overall cost | 300 |
|
||||
#+TBLFM: @9$2=vsum(@2$2..@8$2)
|
||||
|
||||
My choices / advantages:
|
||||
- Using the soldering iron at the uni-workshop for free
|
||||
- 76 Diodes for free
|
||||
- Soldering wire and copper for free
|
||||
- All the resistors used for free (5 resistors are used)
|
||||
- Several files for working out the rough edges of the 3D-printout
|
||||
My choices / advantages:
|
||||
- Using the soldering iron at the uni-workshop for free
|
||||
- 76 Diodes for free
|
||||
- Soldering wire and copper for free
|
||||
- All the resistors used for free (5 resistors are used)
|
||||
- Several files for working out the rough edges of the 3D-printout
|
||||
|
||||
Depending on what you have available you might spend more or less money than me, 300€ however
|
||||
is a good rough estimate.
|
||||
Depending on what you have available you might spend more or less money than me, 300€ however
|
||||
is a good rough estimate.
|
||||
|
||||
After all the parts have arrived it is safe to move on to the next section
|
||||
After all the parts have arrived it is safe to move on to the next section.
|
||||
|
||||
* Wiring
|
||||
It is assumed that you have printed the casing successfully, I had alot of help for this so I'm
|
||||
not going into advice on 3D printing here.
|
||||
|
||||
1) Plug the switches into the Casing, no glue is needed, the casing provides the perfect fit.
|
||||
2) Put the keycaps on the switches
|
||||
- Note that in the pictures here some of the long keys on the thumb-part are too short,
|
||||
that's why it doesnt look symmetrical
|
||||
|
||||
[[file:switches_still_in_bag.jpg]]
|
||||
|
||||
[[file:]]switches_applied_to_casing.jpg
|
||||
[[file:application-of-switches-and-caps.jpg]]
|
||||
|
||||
Now going further on in the guide there are two options
|
||||
1. The first option is to print flexible PCBs. The advantage is that you save alot of wiring
|
||||
|
|
@ -86,12 +89,12 @@
|
|||
2. rewiring to adapt to what the firmware expects, which may easily double your work here
|
||||
- [[Route 1: Dactyl Flexible PCB Rough Guide]]
|
||||
2. The second option is to hand-wire everything. For people like me who had never soldered before
|
||||
this was great joy and pleasure.
|
||||
this was great pain and pleasure.
|
||||
- Here too firmware and wiring go hand in hand, you pretty much have to have a detailed look
|
||||
at the firmware you are using before wiring anything. I provide my modification of the
|
||||
"ergodox-firmware" over here: https://github.com/BubblesToTheLimit/ergodox-firmware
|
||||
- Some of the steps of this guide may not be described in much detail, but in contrast to the
|
||||
first guide there is a whole lot more of information.
|
||||
- Some of the steps of this guide may not be described in much detail, but in contrast to
|
||||
option one there is a whole lot more of information.
|
||||
- [[Route 2: Dactyl Hand-Wiring Guide]]
|
||||
|
||||
** Route 1: Dactyl Flexible PCB Rough Guide
|
||||
|
|
|
|||
Binary file not shown.
|
After Width: | Height: | Size: 365 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 99 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 90 KiB |
Loading…
Reference in New Issue