* C2 - utopia

Musical/visual/dance performance of Borut Kržišnik's new album, Utopia, with
Ryuzo Fukohara dancing and triggering / modulating sounds and projections by Simon Svetlik.

We plan to plant 5-6 sensors on Ryuzota, the IMU signals will be converted
into midi for Borut in Simon.

** Code
*** Arduino sensor
[[file:src/ada.cpp][Arduino source (adafruit on ESP32S2)]]
*** Arduino receiver
[[file:src/sprejemnik.cpp][Arduino source (ESP32S3 receiver)]]
*** Supercollider receiver code
[[file:utopia.scd][Utopia receiver]]
*** SLIPDecoder source
[[file:~/.local/share/SuperCollider/downloaded-quarks/SLIPDecoder/SLIPDecoder.sc][SLIPDecoder source]]

** Microcontrollers
*** LilyGo ESP32-S3
  https://www.lilygo.cc/products/t7-s3
  [[file:doc/t7-s3_v1.1_pinmap.jpg][Pinout]]

  Sometimes doesn't want to flash; hold BOOT button and click RESET to enter flash mode.
  [[file:lib/OSC/SLIPEncodedSerial.cpp][cnmat/OSC SlipEncodedSerial]] needed a modification; constructor argument typecast to ~HWCDC~. 

  Should be compiled with ~-DARDUINO_USB_CDC_ON_BOOT=1~ to enable USB CDC.  
  
*** Olimex ESP32-S2-DevKit-Lipo-USB microcontroller
  For (testing / development)
  https://www.olimex.com/Products/IoT/ESP32-S2/ESP32-S2-DevKit-Lipo-USB/open-source-hardware
  [[file:doc/ESP32-S2-DevKitLiPo-GPIO.png][Pinout]]

** Sensor (Adafruit BNO055)
[[file:lib/Adafruit_BNO055-1.6.3/Adafruit_BNO055.cpp::57][Operating modes]]
[[file:doc/BST_BNO055_DS000_12.pdf][Datasheet]]
  
** Materials

[[file:./dokumentacija.jpg][raw documentation]]

- +8 senzorjev MPU 9250 (9-DOF)+ (wrong models sent, MPU-6500 or similar, returned)
  https://www.ebay.com/itm/153559516252
  5.88$ * 8 + 3.49$ (posiljka) = 47.89$ * 1.22 davek = 58.43$ (+ carina nekaj?)
  
- +8 krmilnikov esp32+
  https://www.olimex.com/Products/IoT/ESP32-C3/ESP32-C3-DevKit-Lipo/open-source-hardware
  6€ * 8 = 48€ * 1.22 davek = 58.56€ (+ shipping = ? - iz bulgarije)
  
- 14x Li-Po battery 3.7V 800mAh
  https://www.tinytronics.nl/en/power/batteries/li-po/li-po-accu-3.7v-800mah
  6.75€ * 14

- 10x Adafruit BNO055 9-DOF sensors
  https://learn.adafruit.com/adafruit-bno055-absolute-orientation-sensor/overview

- 8x LilyGo ESP32-S3 microcontrollers
  https://www.lilygo.cc/products/t7-s3
  [[file:doc/t7-s3_v1.1_pinmap.jpg][Pinout]]

We also need some velcro tape to make sensors easily mountable and
protoboards to hold it all together.

And a charging station for batteries (TODO).