qmk-dactyl-manuform-a/keyboards/acheron/lasgweloth
Ryan 9dcd03b6ca
Set `BOOTLOADER = stm32-dfu` for all applicable STM32 boards (#12956)
* Set bootloader to stm32-dfu for STM32F303

* Set bootloader to stm32-dfu for STM32F0x2

* Set bootloader to stm32-dfu for STM32F4x1

* Set bootloader to stm32duino for sowbug

* Delete redundant bootloader_defs headers

* Add some missing MCU name comments

* Move APM32 dfu-suffix overrides underneath bootloader

* Remove redundant STM32_BOOTLOADER_ADDRESS defines/rules
2021-06-08 19:48:46 +10:00
..
keymaps Acheron Lasgewloth: layout macro rework (#11523) 2021-01-12 12:21:13 +00:00
chconf.h ChibiOS conf migrations... take 11 (#11646) 2021-01-21 17:00:53 +11:00
config.h
info.json Acheron Lasgewloth: layout macro rework (#11523) 2021-01-12 12:21:13 +00:00
lasgweloth.c
lasgweloth.h Acheron Lasgewloth: layout macro rework (#11523) 2021-01-12 12:21:13 +00:00
mcuconf.h Fix up comments showing how to execute config migration. (#11621) 2021-01-20 02:19:36 +11:00
readme.md
rules.mk Set `BOOTLOADER = stm32-dfu` for all applicable STM32 boards (#12956) 2021-06-08 19:48:46 +10:00

readme.md

Acheron Aχξρων 60-SM-S-STM32-MX-TH-WI (codename "Lasgweloth") QMK firmware

Introduction

This is the QMK firmware repository for the Lasgweloth PCB, updated until pre-revision Alpha.

The Lasgweloth PCB is an Open-Hardware guidelines compliant PCB which files can be found at this link. Its designer and maintainer is Gondolindrim.

Layouts

The possible layouts consist of a default or 7U bottom row, with possibility of using split backspace, split right shift and stepped caps lock.

PCB Documentation

See the AcheronDocs page for the Lasgweloth full documentation. You can also check the KiCad PCB files at the GitHub repository.

Before using the files for personal or commercial use, please read the Acheron Open-Hardware License V1.3 under which the Arctic PCB is published.

How to compile

After setting up your build environment, you can compile the Arctic default keymap by using:

make acheron/lasgweloth:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.