qmk-dactyl-manuform-a/keyboards/ergodone
fauxpark 1e670f5e67
Remove `KEYMAP_SECTION_ENABLE` (#7882)
2020-01-17 00:32:09 +11:00
..
keymaps added ability to change unicode input method (#6666) 2019-09-04 09:03:16 +10:00
config.h
ergodone.c
ergodone.h
expander.c
expander.h
i2cmaster.h
info.json
matrix.c Port DEBUG_MATRIX_SCAN_RATE to core (#7029) 2019-10-15 13:32:52 +01:00
readme.md
rules.mk Remove `KEYMAP_SECTION_ENABLE` (#7882) 2020-01-17 00:32:09 +11:00
twimaster.c

readme.md

ErgoDone

ErgoDone

The ErgoDone is a modified version of the ErgoDox, made by K.T.E.C., with pre-soldered components. It has different wiring and uses a SparkFun Pro Micro instead of Teensy.

  • Keyboard maintainer: Yu He
  • Hardware supported:
    • ErgoDone v1.3 (tested)
  • Hardware availability:

Building the firmware

Install the build tools.

In the root directory of the repository, build the firmware with a command like:

make ergodone:default

For more information on the layout option and other ones, see the make guide.

Flashing the firmware onto the keyboard

The ErgoDone uses a customized HID bootloader rather than the Teensy one. It doesn't need an OS driver, and the required actions before flashing are a little different than with an ErgoDox.

  1. To enter flash mode, disconnect the keyboard first. Then, on the left-hand device, in the top row, press and hold the two rightmost keys while reconnecting the keyboard. Ergodone Flash Mode

  2. To flash the .hex file, use the hid_bootloader_cli utlity from the TKG Toolkit (as of 2017-10-03, only this old version works under Windows):

    hid_bootloader_cli -mmcu=atmega32u4 ergodone_default.hex