qmk-dactyl-manuform-a/keyboards/ergodone
Xelus22 b73a29aaea
[Bug] Develop - Change uint32_t to layer_state_t (#13596)
* fix sat75

* update uint32_t to layer_state
2021-07-19 09:50:55 -07:00
..
keymaps [Bug] Develop - Change uint32_t to layer_state_t (#13596) 2021-07-19 09:50:55 -07:00
config.h Ergodone via support (#11618) 2021-04-16 16:26:19 +02:00
ergodone.c
ergodone.h Fix the typo in ergodone 80 layout (#12075) 2021-03-02 14:09:35 +11:00
expander.c
expander.h
i2cmaster.h
info.json
matrix.c Remove legacy print backward compatiblitly (#11805) 2021-02-06 16:56:13 +00:00
readme.md
rules.mk Change `BOOTMAGIC_ENABLE=yes` to use Bootmagic Lite (#12172) 2021-04-12 21:18:52 +02:00
twimaster.c

readme.md

ErgoDone

ErgoDone

The ErgoDone is a modified version of the ErgoDox, made by K.T.E.C., with pre-soldered components. It has different wiring and uses a SparkFun Pro Micro instead of Teensy.

  • Keyboard maintainer: Yu He
  • Hardware supported:
    • ErgoDone v1.3 (tested)
  • Hardware availability:

Building the firmware

Install the build tools.

In the root directory of the repository, build the firmware with a command like:

make ergodone:default

For more information on the layout option and other ones, see the make guide.

Flashing the firmware onto the keyboard

The ErgoDone uses a customized HID bootloader rather than the Teensy one. It doesn't need an OS driver, and the required actions before flashing are a little different than with an ErgoDox.

  1. To enter flash mode, disconnect the keyboard first. Then, on the left-hand device, in the top row, press and hold the two rightmost keys while reconnecting the keyboard. Ergodone Flash Mode

  2. To flash the .hex file, use the hid_bootloader_cli utlity from the TKG Toolkit (as of 2017-10-03, only this old version works under Windows):

    hid_bootloader_cli -mmcu=atmega32u4 ergodone_default.hex