qmk-dactyl-manuform-a/keyboards/ymd75
Ryan 5af1799735
Remove BLUETOOTH_ENABLE from keyboard-level rules.mk (#14379)
2021-09-12 15:27:29 +10:00
..
keymaps
rev1 Change USBasp and bootloadHID bootloaders to lowercase (#14354) 2021-09-10 17:17:54 +10:00
rev2 Change USBasp and bootloadHID bootloaders to lowercase (#14354) 2021-09-10 17:17:54 +10:00
rev3 Remove BLUETOOTH_ENABLE from keyboard-level rules.mk (#14379) 2021-09-12 15:27:29 +10:00
.noci
config.h
info.json Remove width, height and key_count from info.json (#14274) 2021-09-12 14:04:56 +10:00
readme.md
rules.mk
ymd75.c
ymd75.h

readme.md

YMD75 / MT84

75% keyboard from YMDK. YMDK sell the board and name it "YMD75", however revision 1 of the PCB has "MT84" printed on both sides.

This firmware can also be flashed onto the KBDFans KBD75 Round 2 Bootmapper Client boards sold during the mid-2018 timeframe.

Make example for this keyboard (after setting up your build environment):

make ymd75/rev1:default

Flashing example for this keyboard (after setting up the bootloadHID flashing environment)

make ymd75/rev1:default:flash

Reset Key: Hold down the key located at Key below the top right key, commonly programmed as Backspace while plugging in the keyboard. On PCB revision 2, enter the bootloader by holding L_CTRL while plugging in the keyboard.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.