/* Copyright 2013 Oleg Kostyuk 2020 Pierre Chevalier 2021 weteor This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program. If not, see . */ /* * This code was heavily inspired by the ergodox_ez keymap, and modernized * to take advantage of the quantum.h microcontroller agnostics gpio control * abstractions and use the macros defined in config.h for the wiring as opposed * to repeating that information all over the place. */ #include QMK_KEYBOARD_H #include "i2c_master.h" extern i2c_status_t tca9555_status; #define I2C_TIMEOUT 1000 // I2C address: // All address pins of the tca9555 are connected to the ground // | 0 | 1 | 0 | 0 | A2 | A1 | A0 | // | 0 | 1 | 0 | 0 | 0 | 0 | 0 | #define I2C_ADDR (0b0100000 << 1) // Register addresses #define IODIRA 0x06 // i/o direction register #define IODIRB 0x07 #define IREGP0 0x00 // GPIO pull-up resistor register #define IREGP1 0x01 #define OREGP0 0x02 // general purpose i/o port register (write modifies OLAT) #define OREGP1 0x03 bool i2c_initialized = 0; i2c_status_t tca9555_status = I2C_ADDR; uint8_t init_tca9555(void) { print("starting init"); tca9555_status = I2C_ADDR; // I2C subsystem if (i2c_initialized == 0) { i2c_init(); // on pins D(1,0) i2c_initialized = true; wait_ms(I2C_TIMEOUT); } // set pin direction // - unused : input : 1 // - input : input : 1 // - driving : output : 0 uint8_t conf[2] = { // This means: write on pin 5 of port 0, read on rest 0b11011111, // This means: we will write on pins 0 to 2 on port 1. read rest 0b11111000, }; tca9555_status = i2c_writeReg(I2C_ADDR, IODIRA, conf, 2, I2C_TIMEOUT); return tca9555_status; } /* matrix state(1:on, 0:off) */ static matrix_row_t matrix[MATRIX_ROWS]; // debounced values static matrix_row_t read_cols(uint8_t row); static void init_cols(void); static void unselect_rows(void); static void select_row(uint8_t row); static uint8_t tca9555_reset_loop; void matrix_init_custom(void) { // initialize row and col tca9555_status = init_tca9555(); unselect_rows(); init_cols(); // initialize matrix state: all keys off for (uint8_t i = 0; i < MATRIX_ROWS; i++) { matrix[i] = 0; } } void matrix_power_up(void) { tca9555_status = init_tca9555(); unselect_rows(); init_cols(); // initialize matrix state: all keys off for (uint8_t i = 0; i < MATRIX_ROWS; i++) { matrix[i] = 0; } } // Reads and stores a row, returning // whether a change occurred. static inline bool store_matrix_row(matrix_row_t current_matrix[], uint8_t index) { matrix_row_t temp = read_cols(index); if (current_matrix[index] != temp) { current_matrix[index] = temp; return true; } return false; } bool matrix_scan_custom(matrix_row_t current_matrix[]) { if (tca9555_status) { // if there was an error if (++tca9555_reset_loop == 0) { // since tca9555_reset_loop is 8 bit - we'll try to reset once in 255 matrix scans // this will be approx bit more frequent than once per second dprint("trying to reset tca9555\n"); tca9555_status = init_tca9555(); if (tca9555_status) { dprint("right side not responding\n"); } else { dprint("right side attached\n"); } } } bool changed = false; for (uint8_t i = 0; i < MATRIX_ROWS_PER_SIDE; i++) { // select rows from left and right hands uint8_t left_index = i; uint8_t right_index = i + MATRIX_ROWS_PER_SIDE; select_row(left_index); select_row(right_index); // we don't need a 30us delay anymore, because selecting a // left-hand row requires more than 30us for i2c. changed |= store_matrix_row(current_matrix, left_index); changed |= store_matrix_row(current_matrix, right_index); unselect_rows(); } return changed; } static void init_cols(void) { // init on tca9555 // not needed, already done as part of init_tca9555() // init on mcu pin_t matrix_col_pins_mcu[MATRIX_COLS_PER_SIDE] = MATRIX_COL_PINS_L; for (int pin_index = 0; pin_index < MATRIX_COLS_PER_SIDE; pin_index++) { pin_t pin = matrix_col_pins_mcu[pin_index]; setPinInput(pin); writePinHigh(pin); } } static matrix_row_t read_cols(uint8_t row) { if (row < MATRIX_ROWS_PER_SIDE) { pin_t matrix_col_pins_mcu[MATRIX_COLS_PER_SIDE] = MATRIX_COL_PINS_L; matrix_row_t current_row_value = 0; // For each col... for (uint8_t col_index = 0; col_index < MATRIX_COLS_PER_SIDE; col_index++) { // Select the col pin to read (active low) uint8_t pin_state = readPin(matrix_col_pins_mcu[col_index]); // Populate the matrix row with the state of the col pin current_row_value |= pin_state ? 0 : (MATRIX_ROW_SHIFTER << col_index); } return current_row_value; } else { if (tca9555_status) { // if there was an error return 0; } else { uint8_t data = 0; uint8_t ports[2] = {0}; tca9555_status = i2c_readReg(I2C_ADDR, IREGP0, ports, 2, I2C_TIMEOUT); if (tca9555_status) { // if there was an error // do nothing return 0; } else { uint8_t port0 = ports[0]; uint8_t port1 = ports[1]; // The initial state was all ones and any depressed key at a given column for the currently selected row will have its bit flipped to zero. // The return value is a row as represented in the generic matrix code were the rightmost bits represent the lower columns and zeroes represent non-depressed keys while ones represent depressed keys. // Since the pins are not ordered sequentially, we have to build the correct dataset from the two ports. Refer to the schematic to see where every pin is connected. data |= ( port0 & 0x01 ); data |= ( port0 & 0x02 ); data |= ( port1 & 0x10 ) >> 2; data |= ( port1 & 0x08 ); data |= ( port0 & 0x40 ) >> 2; data = ~(data); tca9555_status = I2C_STATUS_SUCCESS; return data; } } } } static void unselect_rows(void) { // no need to unselect on tca9555, because the select step sets all // the other row bits high, and it's not changing to a different // direction // unselect rows on microcontroller pin_t matrix_row_pins_mcu[MATRIX_ROWS_PER_SIDE] = MATRIX_ROW_PINS_L; for (int pin_index = 0; pin_index < MATRIX_ROWS_PER_SIDE; pin_index++) { pin_t pin = matrix_row_pins_mcu[pin_index]; setPinInput(pin); writePinLow(pin); } } static void select_row(uint8_t row) { uint8_t port0 = 0xff; uint8_t port1 = 0xff; if (row < MATRIX_ROWS_PER_SIDE) { // select on atmega32u4 pin_t matrix_row_pins_mcu[MATRIX_ROWS_PER_SIDE] = MATRIX_ROW_PINS_L; pin_t pin = matrix_row_pins_mcu[row]; setPinOutput(pin); writePinLow(pin); } else { // select on tca9555 if (tca9555_status) { // if there was an error // do nothing } else { switch(row) { case 4: port1 &= ~(1 << 0); break; case 5: port1 &= ~(1 << 1); break; case 6: port1 &= ~(1 << 2); break; case 7: port0 &= ~(1 << 5); break; default: break; } uint8_t ports[2] = {port0, port1}; tca9555_status = i2c_writeReg(I2C_ADDR, OREGP0, ports, 2, I2C_TIMEOUT); // Select the desired row by writing a byte for the entire GPIOB bus where only the bit representing the row we want to select is a zero (write instruction) and every other bit is a one. // Note that the row - MATRIX_ROWS_PER_SIDE reflects the fact that being on the right hand, the columns are numbered from MATRIX_ROWS_PER_SIDE to MATRIX_ROWS, but the pins we want to write to are indexed from zero up on the GPIOB bus. } } }