From d67eb20aed97410e11a17f7f5799d822f98a7558 Mon Sep 17 00:00:00 2001 From: MechMerlin <30334081+mechmerlin@users.noreply.github.com> Date: Sun, 19 May 2019 09:50:57 -0700 Subject: [PATCH] [Keyboard] Pearl Refactors (#5907) * use pragma once * remove custom matrix * remove custom i2c code in favor of QMK's i2c_master * rename to all lower case readme * update readme * turn off bootmagic as it doesn't work anyway * Update keyboards/pearl/readme.md Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> --- keyboards/pearl/README.md | 85 ----------------------------- keyboards/pearl/config.h | 4 +- keyboards/pearl/i2c.c | 106 ------------------------------------ keyboards/pearl/i2c.h | 27 --------- keyboards/pearl/matrix.c | 106 ------------------------------------ keyboards/pearl/pearl.c | 71 +++++++++++++++++------- keyboards/pearl/pearl.h | 6 +- keyboards/pearl/readme.md | 47 ++++++++++++++++ keyboards/pearl/rules.mk | 5 +- keyboards/pearl/usbconfig.h | 5 +- 10 files changed, 104 insertions(+), 358 deletions(-) delete mode 100644 keyboards/pearl/README.md delete mode 100644 keyboards/pearl/i2c.c delete mode 100644 keyboards/pearl/i2c.h delete mode 100644 keyboards/pearl/matrix.c create mode 100644 keyboards/pearl/readme.md diff --git a/keyboards/pearl/README.md b/keyboards/pearl/README.md deleted file mode 100644 index ec54ba80f..000000000 --- a/keyboards/pearl/README.md +++ /dev/null @@ -1,85 +0,0 @@ -# Pearl 40% - -Pearl 40% is a keyboard designed by Koobaczech. It uses an Atmel -ATMEGA32A MCU. - -## Compiling and flashing - -These instructions are for building and flashing your Pearl 40% without -Bootmapper Client. - -### Requirements - -#### Windows - -(to be written, help needed) - -#### Mac - -Apart from regular QMK and AVR dependencies you need to install -`bootloadHID`. You can install it with `homebrew` as follows: - - $ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb - -If you don't use `homebrew` you can try following the compiling -instructions defined below in the Linux section. - -#### Linux - -For Linux you require all regular QMK dependencies, but make sure you're -using `gcc-avr` version 4.9 or higher. 4.8 and lower do not contain the -proper definitions for ATMEGA32A MCUs and QMK will fail while attempting -to compile a HEX for Pearl 40%. - -E.g. you cannot compile Pearl 40% HEX on a regular Ubuntu 14.04 as -`gcc-avr` version is maxed to 4.8 on it. - -Additionally you need an operational `bootloadHID` binary. - -You can install `bootloadHID` by taking the following steps: - - $ git clone https://github.com/robertgzr/bootloadHID ~/tmp/bootloadHIDsrc - $ cd ~/tmp/bootloadHIDsrc/commandline - $ make VENDORID=0x16c0 PRODUCTID=0x05DF # vid and pid for atmega32a - $ chmod +x bootloadHID && cp bootloadHID /usr/bin/bootloadHID - -Running `which bootloadHID` should return `/usr/bin/bootloadHID`. - -### Compiling - -Enter the QMK root directory and compile a keymap with the following -command: - - $ make pearl: - -where `` is a layout directory under the `pearl` directory. - -QMK should compile a HEX (called `pearl_.hex`) for you, which -you can flash using `bootloadHID`. - -### Flashing - -To enable Pearl 40% bootloading mode, unplug the keyboard, then plug it -in while holding `Esc` at the same time (the top-leftmost switch on the -PCB, next to the USB connector). Once the board is in bootload mode, -issue the following command (you might require `sudo` to perform the -command): - - # assuming we're still in the QMK root dir where you compiled a HEX into - $ bootloadHID -r ./pearl_.hex - -You should see something similar to - - > Page size = - > Device size = ; remaining - > Uploading bytes starting at 0 (0x0) - > ... - -where `` should be slowly increasing as the HEX is being -flashed to the board. If there is some warning about `resource busy` it -should still work OK. - -Once done the board underglow should turn red and the new firmware has -been flashed. If you can't type on the board try plugging it in again -(without holding any keys to prevent accidentally setting it into -bootload mode again). diff --git a/keyboards/pearl/config.h b/keyboards/pearl/config.h index 6edf170d9..00850b8f0 100644 --- a/keyboards/pearl/config.h +++ b/keyboards/pearl/config.h @@ -35,8 +35,8 @@ along with this program. If not, see . #define MATRIX_ROWS 4 #define MATRIX_COLS 13 -#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 } -#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6} +#define MATRIX_ROW_PINS { B0, B1, B2, B3 } +#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3} #define UNUSED_PINS #define DIODE_DIRECTION COL2ROW diff --git a/keyboards/pearl/i2c.c b/keyboards/pearl/i2c.c deleted file mode 100644 index a4f952135..000000000 --- a/keyboards/pearl/i2c.c +++ /dev/null @@ -1,106 +0,0 @@ -/* -Copyright 2016 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -// Please do not modify this file - -#include -#include - -#include "i2c.h" - -void i2c_set_bitrate(uint16_t bitrate_khz) { - uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz); - if (bitrate_div >= 16) { - bitrate_div = (bitrate_div - 16) / 2; - } - TWBR = bitrate_div; -} - -void i2c_init(void) { - // set pull-up resistors on I2C bus pins - PORTC |= 0b11; - - i2c_set_bitrate(400); - - // enable TWI (two-wire interface) - TWCR |= (1 << TWEN); - - // enable TWI interrupt and slave address ACK - TWCR |= (1 << TWIE); - TWCR |= (1 << TWEA); -} - -uint8_t i2c_start(uint8_t address) { - // reset TWI control register - TWCR = 0; - - // begin transmission and wait for it to end - TWCR = (1< - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -// Please do not modify this file - -#ifndef __I2C_H__ -#define __I2C_H__ - -void i2c_init(void); -void i2c_set_bitrate(uint16_t bitrate_khz); -uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length); - -#endif diff --git a/keyboards/pearl/matrix.c b/keyboards/pearl/matrix.c deleted file mode 100644 index 57aa36b5f..000000000 --- a/keyboards/pearl/matrix.c +++ /dev/null @@ -1,106 +0,0 @@ -/* -Copyright 2017 Luiz Ribeiro - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include -#include - -#include "matrix.h" - -#ifndef DEBOUNCE -#define DEBOUNCE 5 -#endif - -static uint8_t debouncing = DEBOUNCE; - -static matrix_row_t matrix[MATRIX_ROWS]; -static matrix_row_t matrix_debouncing[MATRIX_ROWS]; - -void matrix_init(void) { - // all outputs for rows high - DDRB = 0xFF; - PORTB = 0xFF; - // all inputs for columns - DDRA = 0x00; - DDRC &= ~(0x111111<<2); - DDRD &= ~(1<> 1) & 0x55) | ((x << 1) & 0xaa); - x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc); - x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0); - return x; -} - -uint8_t matrix_scan(void) { - for (uint8_t row = 0; row < MATRIX_ROWS; row++) { - matrix_set_row_status(row); - _delay_us(5); - - matrix_row_t cols = ( - // cols 0..7, PORTA 0 -> 7 - (~PINA) & 0xFF - ) | ( - // cols 8..13, PORTC 7 -> 0 - bit_reverse((~PINC) & 0xFF) << 8 - ) | ( - // col 14, PORTD 7 - ((~PIND) & (1 << PIND7)) << 7 - ); - - if (matrix_debouncing[row] != cols) { - matrix_debouncing[row] = cols; - debouncing = DEBOUNCE; - } - } - - if (debouncing) { - if (--debouncing) { - _delay_ms(1); - } else { - for (uint8_t i = 0; i < MATRIX_ROWS; i++) { - matrix[i] = matrix_debouncing[i]; - } - } - } - - matrix_scan_user(); - - return 1; -} - -inline matrix_row_t matrix_get_row(uint8_t row) { - return matrix[row]; -} - -void matrix_print(void) { -} diff --git a/keyboards/pearl/pearl.c b/keyboards/pearl/pearl.c index 3bbadb0a7..c8cd8a860 100644 --- a/keyboards/pearl/pearl.c +++ b/keyboards/pearl/pearl.c @@ -15,16 +15,11 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#include "pearl.h" #include "rgblight.h" -#include "backlight.h" - -#include - -#include "action_layer.h" -#include "i2c.h" +#include "i2c_master.h" #include "quantum.h" +#ifdef RGBLIGHT_ENABLE extern rgblight_config_t rgblight_config; void rgblight_set(void) { @@ -37,23 +32,59 @@ void rgblight_set(void) { } i2c_init(); - i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM); + i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); +} +#endif + +void matrix_init_kb(void) { +#ifdef RGBLIGHT_ENABLE + if (rgblight_config.enable) { + i2c_init(); + i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100); + } +#endif + // call user level keymaps, if any + matrix_init_user(); } -void backlight_init_ports(void) { - DDRD |= (1<<4); - PORTD &= ~(1<<4); -} - -void backlight_set(uint8_t level) { - if (level > 0) { - PORTD |= (1<<4); - } else { - PORTD &= ~(1<<4); - } +void matrix_scan_kb(void) { +#ifdef RGBLIGHT_ENABLE + rgblight_task(); +#endif + matrix_scan_user(); + /* Nothing else for now. */ } __attribute__ ((weak)) void matrix_scan_user(void) { - rgblight_task(); } + +void backlight_init_ports(void) { + // initialize pins D0, D1, D4 and D6 as output + setPinOutput(D0); + setPinOutput(D1); + setPinOutput(D4); + setPinOutput(D6); + + // turn backlight LEDs on + writePinHigh(D0); + writePinHigh(D1); + writePinHigh(D4); + writePinHigh(D6); +} + +void backlight_set(uint8_t level) { + if (level == 0) { + // turn backlight LEDs off + writePinLow(D0); + writePinLow(D1); + writePinLow(D4); + writePinLow(D6); + } else { + // turn backlight LEDs on + writePinHigh(D0); + writePinHigh(D1); + writePinHigh(D4); + writePinHigh(D6); + } +} \ No newline at end of file diff --git a/keyboards/pearl/pearl.h b/keyboards/pearl/pearl.h index 6f5fbce5d..72df1595d 100644 --- a/keyboards/pearl/pearl.h +++ b/keyboards/pearl/pearl.h @@ -15,8 +15,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#ifndef PEARL_H -#define PEARL_H +#pragma once #include "quantum.h" #include "pearl.h" @@ -56,6 +55,3 @@ along with this program. If not, see . { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, KC_NO}, \ { K30, K31, KC_NO, KC_NO, KC_NO, K35, KC_NO, KC_NO, KC_NO, K39, K3A, KC_NO, KC_NO}, \ } - - -#endif diff --git a/keyboards/pearl/readme.md b/keyboards/pearl/readme.md new file mode 100644 index 000000000..c39d86cf3 --- /dev/null +++ b/keyboards/pearl/readme.md @@ -0,0 +1,47 @@ +# Pearl 40% + +Pearl 40% is a keyboard designed by Koobaczech. It uses an Atmel +ATMEGA32A MCU. + +Keyboard Maintainer: [Ethan Madden](https://github.com/jetpacktuxedo) +Hardware Supported: Pearl +Hardware Availability: [Geekhack Group Buy](https://geekhack.org/index.php?topic=92259.0) + +Make example for this keyboard (after setting up your build environment): + + make pearl:default + +Flashing + +ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods. + +**Reset Key:** Hold down the key located at `K00`. + +Windows: +1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash). +2. Place your keyboard into reset. +3. Press the `Find Device` button and ensure that your keyboard is found. +4. Press the `Open .hex File` button and locate the `.hex` file you created. +5. Press the `Flash Device` button and wait for the process to complete. + +macOS: +1. Install homebrew by typing the following: + ``` + /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)" + ``` +2. Install `crosspack-avr`. + ``` + brew cask install crosspack-avr + ``` +3. Install the following packages: + ``` + brew install python3 + pip3 install pyusb + brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb + ``` +4. Place your keyboard into reset. +5. Flash the board by typing `bootloadHID -r` followed by the path to your `.hex` file. + +**Please Note:** You will need to use the `EEP_RST` keycode first, followed by unplugging/replugging the board to get RGB underglow effects to work. + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/pearl/rules.mk b/keyboards/pearl/rules.mk index fac85172e..4db92d121 100644 --- a/keyboards/pearl/rules.mk +++ b/keyboards/pearl/rules.mk @@ -31,7 +31,7 @@ F_CPU = 12000000 BOOTLOADER = bootloadHID # build options -BOOTMAGIC_ENABLE = full +BOOTMAGIC_ENABLE = no MOUSEKEY_ENABLE = no EXTRAKEY_ENABLE = yes CONSOLE_ENABLE = yes @@ -43,8 +43,7 @@ RGBLIGHT_CUSTOM_DRIVER = yes OPT_DEFS = -DDEBUG_LEVEL=0 # custom matrix setup -CUSTOM_MATRIX = yes -SRC = matrix.c i2c.c +SRC = i2c_master.c # programming options PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex diff --git a/keyboards/pearl/usbconfig.h b/keyboards/pearl/usbconfig.h index d2d848fcd..54a7d20f1 100644 --- a/keyboards/pearl/usbconfig.h +++ b/keyboards/pearl/usbconfig.h @@ -8,8 +8,7 @@ * This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $ */ -#ifndef __usbconfig_h_included__ -#define __usbconfig_h_included__ +#pragma once #include "config.h" @@ -392,5 +391,3 @@ section at the end of this file). /* #define USB_INTR_PENDING EIFR */ #define USB_INTR_PENDING_BIT INTF1 #define USB_INTR_VECTOR INT1_vect - -#endif /* __usbconfig_h_included__ */