diff --git a/keyboards/redscarf_iiplus/verd/config.h b/keyboards/redscarf_iiplus/verd/config.h
new file mode 100644
index 000000000..5c19f2abe
--- /dev/null
+++ b/keyboards/redscarf_iiplus/verd/config.h
@@ -0,0 +1,251 @@
+/*
+Copyright 2019 Andy Lee <alee@alittlepeacemusic.com>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x7778
+#define DEVICE_VER      0x0001
+#define MANUFACTURER    RedScarf
+#define PRODUCT         RedScarfII+
+#define DESCRIPTION     QMK Firmware for the RedScarf II+
+
+/* key matrix size */
+#define MATRIX_ROWS 5
+#define MATRIX_COLS 18
+
+
+/*
+ * Keyboard Matrix Assignments
+ *
+ * Change this to how you wired your keyboard
+ * COLS: AVR pins used for columns, left to right
+ * ROWS: AVR pins used for rows, top to bottom
+ * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
+ *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
+ *
+*/
+#define MATRIX_ROW_PINS { }
+#define MATRIX_COL_PINS { F4, F1, F0, B3, D0, D1, D4, D5, D6, D7, F7, F6, D2, D3, B6, B5, B4, F5 }
+#define UNUSED_PINS
+
+/* COL2ROW, ROW2COL*/
+#define DIODE_DIRECTION COL2ROW
+
+/*
+ * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
+ */
+//#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
+
+#define BACKLIGHT_PIN B7
+//   #define BACKLIGHT_BREATHING
+#define BACKLIGHT_LEVELS 3
+
+// #define RGB_DI_PIN E2
+// #ifdef RGB_DI_PIN
+//   #define RGBLED_NUM 16
+//   #define RGBLIGHT_HUE_STEP 8
+//   #define RGBLIGHT_SAT_STEP 8
+//   #define RGBLIGHT_VAL_STEP 8
+//   #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
+//   #define RGBLIGHT_SLEEP  /* If defined, the RGB lighting will be switched off when the host goes to sleep */
+// /*== all animations enable ==*/
+//   #define RGBLIGHT_ANIMATIONS
+// /*== or choose animations ==*/
+//   #define RGBLIGHT_EFFECT_BREATHING
+//   #define RGBLIGHT_EFFECT_RAINBOW_MOOD
+//   #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+//   #define RGBLIGHT_EFFECT_SNAKE
+//   #define RGBLIGHT_EFFECT_KNIGHT
+//   #define RGBLIGHT_EFFECT_CHRISTMAS
+//   #define RGBLIGHT_EFFECT_STATIC_GRADIENT
+//   #define RGBLIGHT_EFFECT_RGB_TEST
+//   #define RGBLIGHT_EFFECT_ALTERNATING
+// /*== customize breathing effect ==*/
+//   /*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
+//   #define RGBLIGHT_BREATHE_TABLE_SIZE 256      // 256(default) or 128 or 64
+//   /*==== use exp() and sin() ====*/
+//   #define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85  // 1 to 2.7
+//   #define RGBLIGHT_EFFECT_BREATHE_MAX    255   // 0 to 255
+// #endif
+
+/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
+#define DEBOUNCE 5
+
+/* define if matrix has ghost (lacks anti-ghosting diodes) */
+//#define MATRIX_HAS_GHOST
+
+/* number of backlight levels */
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
+ * This is userful for the Windows task manager shortcut (ctrl+shift+esc).
+ */
+// #define GRAVE_ESC_CTRL_OVERRIDE
+
+/*
+ * Force NKRO
+ *
+ * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
+ * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
+ * makefile for this to work.)
+ *
+ * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
+ * until the next keyboard reset.
+ *
+ * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
+ * fully operational during normal computer usage.
+ *
+ * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
+ * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
+ * bootmagic, NKRO mode will always be enabled until it is toggled again during a
+ * power-up.
+ *
+ */
+//#define FORCE_NKRO
+
+/*
+ * Magic Key Options
+ *
+ * Magic keys are hotkey commands that allow control over firmware functions of
+ * the keyboard. They are best used in combination with the HID Listen program,
+ * found here: https://www.pjrc.com/teensy/hid_listen.html
+ *
+ * The options below allow the magic key functionality to be changed. This is
+ * useful if your keyboard/keypad is missing keys and you want magic key support.
+ *
+ */
+
+/* key combination for magic key command */
+/* defined by default; to change, uncomment and set to the combination you want */
+// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
+
+/* control how magic key switches layers */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS  true
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
+
+/* override magic key keymap */
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
+//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
+//#define MAGIC_KEY_HELP           H
+//#define MAGIC_KEY_HELP_ALT       SLASH
+//#define MAGIC_KEY_DEBUG          D
+//#define MAGIC_KEY_DEBUG_MATRIX   X
+//#define MAGIC_KEY_DEBUG_KBD      K
+//#define MAGIC_KEY_DEBUG_MOUSE    M
+//#define MAGIC_KEY_VERSION        V
+//#define MAGIC_KEY_STATUS         S
+//#define MAGIC_KEY_CONSOLE        C
+//#define MAGIC_KEY_LAYER0         0
+//#define MAGIC_KEY_LAYER0_ALT     GRAVE
+//#define MAGIC_KEY_LAYER1         1
+//#define MAGIC_KEY_LAYER2         2
+//#define MAGIC_KEY_LAYER3         3
+//#define MAGIC_KEY_LAYER4         4
+//#define MAGIC_KEY_LAYER5         5
+//#define MAGIC_KEY_LAYER6         6
+//#define MAGIC_KEY_LAYER7         7
+//#define MAGIC_KEY_LAYER8         8
+//#define MAGIC_KEY_LAYER9         9
+//#define MAGIC_KEY_BOOTLOADER     B
+//#define MAGIC_KEY_BOOTLOADER_ALT ESC
+//#define MAGIC_KEY_LOCK           CAPS
+//#define MAGIC_KEY_EEPROM         E
+//#define MAGIC_KEY_EEPROM_CLEAR   BSPACE
+//#define MAGIC_KEY_NKRO           N
+//#define MAGIC_KEY_SLEEP_LED      Z
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
+/*
+ * MIDI options
+ */
+
+/* Prevent use of disabled MIDI features in the keymap */
+//#define MIDI_ENABLE_STRICT 1
+
+/* enable basic MIDI features:
+   - MIDI notes can be sent when in Music mode is on
+*/
+//#define MIDI_BASIC
+
+/* enable advanced MIDI features:
+   - MIDI notes can be added to the keymap
+   - Octave shift and transpose
+   - Virtual sustain, portamento, and modulation wheel
+   - etc.
+*/
+//#define MIDI_ADVANCED
+
+/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
+//#define MIDI_TONE_KEYCODE_OCTAVES 1
+
+/*
+ * HD44780 LCD Display Configuration
+ */
+/*
+#define LCD_LINES           2     //< number of visible lines of the display
+#define LCD_DISP_LENGTH    16     //< visibles characters per line of the display
+
+#define LCD_IO_MODE      1            //< 0: memory mapped mode, 1: IO port mode
+
+#if LCD_IO_MODE
+#define LCD_PORT         PORTB        //< port for the LCD lines
+#define LCD_DATA0_PORT   LCD_PORT     //< port for 4bit data bit 0
+#define LCD_DATA1_PORT   LCD_PORT     //< port for 4bit data bit 1
+#define LCD_DATA2_PORT   LCD_PORT     //< port for 4bit data bit 2
+#define LCD_DATA3_PORT   LCD_PORT     //< port for 4bit data bit 3
+#define LCD_DATA0_PIN    4            //< pin for 4bit data bit 0
+#define LCD_DATA1_PIN    5            //< pin for 4bit data bit 1
+#define LCD_DATA2_PIN    6            //< pin for 4bit data bit 2
+#define LCD_DATA3_PIN    7            //< pin for 4bit data bit 3
+#define LCD_RS_PORT      LCD_PORT     //< port for RS line
+#define LCD_RS_PIN       3            //< pin  for RS line
+#define LCD_RW_PORT      LCD_PORT     //< port for RW line
+#define LCD_RW_PIN       2            //< pin  for RW line
+#define LCD_E_PORT       LCD_PORT     //< port for Enable line
+#define LCD_E_PIN        1            //< pin  for Enable line
+#endif
+*/
+
+/* Bootmagic Lite key configuration */
+// #define BOOTMAGIC_LITE_ROW 0
+// #define BOOTMAGIC_LITE_COLUMN 0
diff --git a/keyboards/redscarf_iiplus/verd/info.json b/keyboards/redscarf_iiplus/verd/info.json
new file mode 100644
index 000000000..e0ea3f134
--- /dev/null
+++ b/keyboards/redscarf_iiplus/verd/info.json
@@ -0,0 +1,190 @@
+{
+  "keyboard_name": "Red Scarf II+ Ver D",
+  "url": "",
+  "maintainer": "qmk",
+  "width": 19,
+  "height": 5,
+  "layouts": {  
+    "LAYOUT_60_ansi_numpad_split0": {
+      "key_count": 79,
+      "layout": [
+
+        {"label":"~", "x":0, "y":0},
+        {"label":"!", "x":1, "y":0},
+        {"label":"@", "x":2, "y":0},
+        {"label":"#", "x":3, "y":0},
+        {"label":"$", "x":4, "y":0},
+        {"label":"%", "x":5, "y":0},
+        {"label":"^", "x":6, "y":0},
+        {"label":"&", "x":7, "y":0},
+        {"label":"*", "x":8, "y":0},
+        {"label":"(", "x":9, "y":0},
+        {"label":")", "x":10, "y":0},
+        {"label":"_", "x":11, "y":0},
+        {"label":"+", "x":12, "y":0},
+        {"label":"Backspace", "x":13, "y":0, "w":2},
+        {"label":"Num Lock", "x":15, "y":0},
+        {"label":"/", "x":16, "y":0},
+        {"label":"*", "x":17, "y":0},
+        {"label":"-", "x":18, "y":0},
+
+        {"label":"Tab", "x":0, "y":1, "w":1.5},
+        {"label":"Q", "x":1.5, "y":1},
+        {"label":"W", "x":2.5, "y":1},
+        {"label":"E", "x":3.5, "y":1},
+        {"label":"R", "x":4.5, "y":1},
+        {"label":"T", "x":5.5, "y":1},
+        {"label":"Y", "x":6.5, "y":1},
+        {"label":"U", "x":7.5, "y":1},
+        {"label":"I", "x":8.5, "y":1},
+        {"label":"O", "x":9.5, "y":1},
+        {"label":"P", "x":10.5, "y":1},
+        {"label":"{", "x":11.5, "y":1},
+        {"label":"}", "x":12.5, "y":1},
+        {"label":"|", "x":13.5, "y":1, "w":1.5},
+        {"label":"7", "x":15, "y":1},
+        {"label":"8", "x":16, "y":1},
+        {"label":"9", "x":17, "y":1},
+
+        {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+        {"label":"A", "x":1.75, "y":2},
+        {"label":"S", "x":2.75, "y":2},
+        {"label":"D", "x":3.75, "y":2},
+        {"label":"F", "x":4.75, "y":2},
+        {"label":"G", "x":5.75, "y":2},
+        {"label":"H", "x":6.75, "y":2},
+        {"label":"J", "x":7.75, "y":2},
+        {"label":"K", "x":8.75, "y":2},
+        {"label":"L", "x":9.75, "y":2},
+        {"label":":", "x":10.75, "y":2},
+        {"label":"\"", "x":11.75, "y":2},
+        {"label":"Enter", "x":12.75, "y":2, "w":2.25},
+        {"label":"4", "x":15, "y":2},
+        {"label":"5", "x":16, "y":2},
+        {"label":"6", "x":17, "y":2},
+        {"label":"+", "x":18, "y":1, "h":2},
+	
+        {"label":"Shift", "x":0, "y":3, "w":2.25},
+        {"label":"Z", "x":2.25, "y":3},
+        {"label":"X", "x":3.25, "y":3},
+        {"label":"C", "x":4.25, "y":3},
+        {"label":"V", "x":5.25, "y":3},
+        {"label":"B", "x":6.25, "y":3},
+        {"label":"N", "x":7.25, "y":3},
+        {"label":"M", "x":8.25, "y":3},
+        {"label":"<", "x":9.25, "y":3},
+        {"label":">", "x":10.25, "y":3},
+        {"label":"?", "x":11.25, "y":3},
+        {"label":"Shift", "x":12.25, "y":3, "w":2.75},
+        {"label":"1", "x":15, "y":3},
+        {"label":"2", "x":16, "y":3},
+        {"label":"3", "x":17, "y":3},
+
+        {"label":"Ctrl", "x":0, "y":4, "w":1.25},
+        {"label":"Win", "x":1.25, "y":4, "w":1.25},
+        {"label":"Alt", "x":2.5, "y":4, "w":1.25},
+        {"x":3.75, "y":4, "w":6.25},
+        {"label":"Alt", "x":10, "y":4, "w":1.25},
+        {"label":"Win", "x":11.25, "y":4, "w":1.25},
+        {"label":"Menu", "x":12.5, "y":4, "w":1.25},
+        {"label":"Ctrl", "x":13.75, "y":4, "w":1.25},
+        
+        {"label":"0", "x":15, "y":4},
+        {"label":"0", "x":16, "y":4},
+        {"label":".", "x":17, "y":4},
+        {"label":"Enter", "x":18, "y":3, "h":2}
+      ]
+
+         },
+      "LAYOUT_60_ansi_numpad": {
+      "key_count": 78,
+      "layout": [
+
+        {"label":"~", "x":0, "y":0},
+        {"label":"!", "x":1, "y":0},
+        {"label":"@", "x":2, "y":0},
+        {"label":"#", "x":3, "y":0},
+        {"label":"$", "x":4, "y":0},
+        {"label":"%", "x":5, "y":0},
+        {"label":"^", "x":6, "y":0},
+        {"label":"&", "x":7, "y":0},
+        {"label":"*", "x":8, "y":0},
+        {"label":"(", "x":9, "y":0},
+        {"label":")", "x":10, "y":0},
+        {"label":"_", "x":11, "y":0},
+        {"label":"+", "x":12, "y":0},
+        {"label":"Backspace", "x":13, "y":0, "w":2},
+        {"label":"Num Lock", "x":15, "y":0},
+        {"label":"/", "x":16, "y":0},
+        {"label":"*", "x":17, "y":0},
+        {"label":"-", "x":18, "y":0},
+
+        {"label":"Tab", "x":0, "y":1, "w":1.5},
+        {"label":"Q", "x":1.5, "y":1},
+        {"label":"W", "x":2.5, "y":1},
+        {"label":"E", "x":3.5, "y":1},
+        {"label":"R", "x":4.5, "y":1},
+        {"label":"T", "x":5.5, "y":1},
+        {"label":"Y", "x":6.5, "y":1},
+        {"label":"U", "x":7.5, "y":1},
+        {"label":"I", "x":8.5, "y":1},
+        {"label":"O", "x":9.5, "y":1},
+        {"label":"P", "x":10.5, "y":1},
+        {"label":"{", "x":11.5, "y":1},
+        {"label":"}", "x":12.5, "y":1},
+        {"label":"|", "x":13.5, "y":1, "w":1.5},
+        {"label":"7", "x":15, "y":1},
+        {"label":"8", "x":16, "y":1},
+        {"label":"9", "x":17, "y":1},
+
+        {"label":"Caps Lock", "x":0, "y":2, "w":1.75},
+        {"label":"A", "x":1.75, "y":2},
+        {"label":"S", "x":2.75, "y":2},
+        {"label":"D", "x":3.75, "y":2},
+        {"label":"F", "x":4.75, "y":2},
+        {"label":"G", "x":5.75, "y":2},
+        {"label":"H", "x":6.75, "y":2},
+        {"label":"J", "x":7.75, "y":2},
+        {"label":"K", "x":8.75, "y":2},
+        {"label":"L", "x":9.75, "y":2},
+        {"label":":", "x":10.75, "y":2},
+        {"label":"\"", "x":11.75, "y":2},
+        {"label":"Enter", "x":12.75, "y":2, "w":2.25},
+        {"label":"4", "x":15, "y":2},
+        {"label":"5", "x":16, "y":2},
+        {"label":"6", "x":17, "y":2},
+        {"label":"+", "x":18, "y":1, "h":2},
+	
+        {"label":"Shift", "x":0, "y":3, "w":2.25},
+        {"label":"Z", "x":2.25, "y":3},
+        {"label":"X", "x":3.25, "y":3},
+        {"label":"C", "x":4.25, "y":3},
+        {"label":"V", "x":5.25, "y":3},
+        {"label":"B", "x":6.25, "y":3},
+        {"label":"N", "x":7.25, "y":3},
+        {"label":"M", "x":8.25, "y":3},
+        {"label":"<", "x":9.25, "y":3},
+        {"label":">", "x":10.25, "y":3},
+        {"label":"?", "x":11.25, "y":3},
+        {"label":"Shift", "x":12.25, "y":3, "w":2.75},
+        {"label":"1", "x":15, "y":3},
+        {"label":"2", "x":16, "y":3},
+        {"label":"3", "x":17, "y":3},
+
+        {"label":"Ctrl", "x":0, "y":4, "w":1.25},
+        {"label":"Win", "x":1.25, "y":4, "w":1.25},
+        {"label":"Alt", "x":2.5, "y":4, "w":1.25},
+        {"x":3.75, "y":4, "w":6.25},
+        {"label":"Alt", "x":10, "y":4, "w":1.25},
+        {"label":"Win", "x":11.25, "y":4, "w":1.25},
+        {"label":"Menu", "x":12.5, "y":4, "w":1.25},
+        {"label":"Ctrl", "x":13.75, "y":4, "w":1.25},
+        
+        {"label":"0", "x":15, "y":4, "w":2},
+        {"label":".", "x":17, "y":4},
+        {"label":"Enter", "x":18, "y":3, "h":2}
+      ]
+      }
+
+    }
+}
diff --git a/keyboards/redscarf_iiplus/verd/keymaps/alittlepeace/keymap.c b/keyboards/redscarf_iiplus/verd/keymaps/alittlepeace/keymap.c
new file mode 100644
index 000000000..9c4fee8a6
--- /dev/null
+++ b/keyboards/redscarf_iiplus/verd/keymaps/alittlepeace/keymap.c
@@ -0,0 +1,81 @@
+/* Copyright 2019 Andy Lee <alee@alittlepeacemusic.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+// Defines the keycodes used by our macros in process_record_user
+enum custom_keycodes {
+    KC_P00 = SAFE_RANGE,
+    
+};
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    [0] = LAYOUT_60_ansi_numpad_split0(
+        KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, TG(1), KC_PSLS, KC_PAST, KC_PMNS, 
+        KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_INS, KC_HOME, KC_PGUP, 
+        KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_DEL, KC_END, KC_PGDN, KC_PPLS, 
+        KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, C(S(KC_TAB)), KC_UP, LCTL(KC_TAB), 
+        KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(2), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_PENT
+    ),
+
+    [1] = LAYOUT_60_ansi_numpad_split0(
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_7,    KC_8,    KC_9,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, KC_4,    KC_5,    KC_6,    _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, KC_1,    KC_2,    KC_3,
+        _______, _______, _______,                            _______,                            _______, _______, _______, _______, KC_0,    KC_P00,  KC_DOT,  _______
+    ),
+    
+    [2] = LAYOUT_60_ansi_numpad_split0(
+        _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______, _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______, _______, _______,
+        _______, _______, _______,                            _______,                            _______, _______, _______, _______, _______, _______, _______, _______
+    ),
+};
+bool process_record_user(uint16_t keycode, keyrecord_t *record) {
+    switch (keycode) {
+        case KC_P00:
+            if (record->event.pressed) {
+                SEND_STRING("00");
+                 }
+        break;
+         case TG(1):
+           if (record->event.pressed) {
+                tap_code(KC_NUMLOCK);
+		return true;
+		}
+	   break;
+
+    }
+    return true;
+}
+
+void matrix_init_user (void) {
+  if (!host_keyboard_led_state ().num_lock) {
+      tap_code(KC_NUMLOCK);
+  }
+}
+
+bool led_update_user(led_t led_state) {
+    if (led_state.num_lock) {
+        layer_on(1);
+    } else {
+        layer_off(1);
+    }
+    return true;
+}
diff --git a/keyboards/redscarf_iiplus/verd/keymaps/default/keymap.c b/keyboards/redscarf_iiplus/verd/keymaps/default/keymap.c
new file mode 100644
index 000000000..b0bbeeea0
--- /dev/null
+++ b/keyboards/redscarf_iiplus/verd/keymaps/default/keymap.c
@@ -0,0 +1,37 @@
+/* Copyright 2019 Andy Lee <alee@alittlepeacemusic.com>
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include QMK_KEYBOARD_H
+
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+
+    [0] = LAYOUT_60_ansi_numpad(
+        KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, 
+        KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, 
+        KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, 
+        KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_P1, KC_P2, KC_P3, 
+        KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, MO(1), KC_RCTL, KC_P0, KC_PDOT, KC_PENT
+    ),
+    
+    [1] = LAYOUT_60_ansi_numpad(
+        _______, KC_F1,   KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,   KC_F7,   KC_F8,   KC_F9,   KC_F10,  KC_F11,  KC_F12, _______, _______, _______, _______, _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,  _______,  _______,
+        _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,  _______,  _______,    _______,
+        _______,          _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,          _______, _______,  _______,  _______,
+        _______, _______, _______,                            _______,                            _______, _______, _______, _______, _______,  _______,  _______
+    ),
+};
+
diff --git a/keyboards/redscarf_iiplus/verd/keymaps/default/readme.md b/keyboards/redscarf_iiplus/verd/keymaps/default/readme.md
new file mode 100644
index 000000000..cf396a425
--- /dev/null
+++ b/keyboards/redscarf_iiplus/verd/keymaps/default/readme.md
@@ -0,0 +1 @@
+# The default keymap for the Red Scarf II+ ver D.
diff --git a/keyboards/redscarf_iiplus/verd/matrix.c b/keyboards/redscarf_iiplus/verd/matrix.c
new file mode 100644
index 000000000..28568653c
--- /dev/null
+++ b/keyboards/redscarf_iiplus/verd/matrix.c
@@ -0,0 +1,391 @@
+/*
+Copyright 2012-2018 Jun Wako, Jack Humbert, Yiancar
+Port done by Andy Lee <alee@alittlepeacemusic.com>
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+#include <stdint.h>
+#include <stdbool.h>
+#include "wait.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+#include "debounce.h"
+#include "quantum.h"
+
+#if (MATRIX_COLS <= 8)
+#    define print_matrix_header()  print("\nr/c 01234567\n")
+#    define print_matrix_row(row)  print_bin_reverse8(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop(matrix[i])
+#    define ROW_SHIFTER ((uint8_t)1)
+#elif (MATRIX_COLS <= 16)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse16(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop16(matrix[i])
+#    define ROW_SHIFTER ((uint16_t)1)
+#elif (MATRIX_COLS <= 32)
+#    define print_matrix_header()  print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
+#    define print_matrix_row(row)  print_bin_reverse32(matrix_get_row(row))
+#    define matrix_bitpop(i)       bitpop32(matrix[i])
+#    define ROW_SHIFTER  ((uint32_t)1)
+#endif
+
+#ifdef MATRIX_MASKED
+    extern const matrix_row_t matrix_mask[];
+#endif
+
+#ifdef DIRECT_PINS
+static pin_t direct_pins[MATRIX_ROWS][MATRIX_COLS] = DIRECT_PINS;
+#elif (DIODE_DIRECTION == ROW2COL) || (DIODE_DIRECTION == COL2ROW)
+// static const pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
+static const pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
+#endif
+
+/* matrix state(1:on, 0:off) */
+static matrix_row_t raw_matrix[MATRIX_ROWS]; //raw values
+static matrix_row_t matrix[MATRIX_ROWS]; //debounced values
+
+__attribute__ ((weak))
+void matrix_init_quantum(void) {
+    matrix_init_kb();
+}
+
+__attribute__ ((weak))
+void matrix_scan_quantum(void) {
+    matrix_scan_kb();
+}
+
+__attribute__ ((weak))
+void matrix_init_kb(void) {
+    matrix_init_user();
+}
+
+__attribute__ ((weak))
+void matrix_scan_kb(void) {
+    matrix_scan_user();
+}
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+inline
+uint8_t matrix_rows(void) {
+    return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void) {
+    return MATRIX_COLS;
+}
+
+//Deprecated.
+bool matrix_is_modified(void)
+{
+    if (debounce_active()) return false;
+    return true;
+}
+
+inline
+bool matrix_is_on(uint8_t row, uint8_t col)
+{
+    return (matrix[row] & ((matrix_row_t)1<<col));
+}
+
+inline
+matrix_row_t matrix_get_row(uint8_t row)
+{
+    // Matrix mask lets you disable switches in the returned matrix data. For example, if you have a
+    // switch blocker installed and the switch is always pressed.
+#ifdef MATRIX_MASKED
+    return matrix[row] & matrix_mask[row];
+#else
+    return matrix[row];
+#endif
+}
+
+void matrix_print(void)
+{
+    print_matrix_header();
+
+    for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
+        phex(row); print(": ");
+        print_matrix_row(row);
+        print("\n");
+    }
+}
+
+uint8_t matrix_key_count(void)
+{
+    uint8_t count = 0;
+    for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
+        count += matrix_bitpop(i);
+    }
+    return count;
+}
+
+
+#ifdef DIRECT_PINS
+
+static void init_pins(void) {
+  for (int row = 0; row < MATRIX_ROWS; row++) {
+    for (int col = 0; col < MATRIX_COLS; col++) {
+      pin_t pin = direct_pins[row][col];
+      if (pin != NO_PIN) {
+        setPinInputHigh(pin);
+      }
+    }
+  }
+}
+
+static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) {
+  matrix_row_t last_row_value = current_matrix[current_row];
+  current_matrix[current_row] = 0;
+
+  for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
+    pin_t pin = direct_pins[current_row][col_index];
+    if (pin != NO_PIN) {
+      current_matrix[current_row] |= readPin(pin) ? 0 : (ROW_SHIFTER << col_index);
+    }
+  }
+
+  return (last_row_value != current_matrix[current_row]);
+}
+
+#elif (DIODE_DIRECTION == COL2ROW)
+/* Rows 0 - 5
+ * These rows use a 74HC138 3-to-8 demultiplexer.
+ *                C    B    A
+ * row / pin:    PB0  PB1  PB2
+ * 0:             0    0    0
+ * 1:             0    0    1
+ * 2:             0    1    0
+ * 3:             0    1    1
+ * 4:             1    0    0
+ * 5:             1    0    1
+ */
+static void select_row(uint8_t col)
+{
+    switch (col) {
+        case 0:
+            writePinLow(B0);
+            writePinLow(B1);
+            writePinLow(B2);
+            break;
+        case 1:
+            writePinLow(B0);
+            writePinLow(B1);
+            break;
+        case 2:
+            writePinLow(B0);
+            writePinLow(B2);
+            break;
+        case 3:
+            writePinLow(B0);
+            break;
+        case 4:
+            writePinLow(B1);
+            writePinLow(B2);
+            break;
+        case 5:
+            writePinLow(B1);
+            break;
+    }
+}
+
+static void unselect_row(uint8_t col)
+{
+    switch (col) {
+        case 0:
+            writePinHigh(B0);
+            writePinHigh(B1);
+            writePinHigh(B2);
+            break;
+        case 1:
+            writePinHigh(B0);
+            writePinHigh(B1);
+            break;
+        case 2:
+            writePinHigh(B0);
+            writePinHigh(B2);
+            break;
+        case 3:
+            writePinHigh(B0);
+            break;
+        case 4:
+            writePinHigh(B1);
+            writePinHigh(B2);
+            break;
+        case 5:
+            writePinHigh(B1);
+            break;
+    }
+}
+
+static void unselect_rows(void)
+{
+    setPinOutput(B0);
+    setPinOutput(B1);
+    setPinOutput(B2);
+	// make all pins high to select Y7, nothing is connected to that (otherwise the first row will act weird)
+    writePinHigh(B0);
+    writePinHigh(B1);
+    writePinHigh(B2);
+}
+
+static void init_pins(void) {
+  unselect_rows();
+  for (uint8_t x = 0; x < MATRIX_COLS; x++) {
+    setPinInputHigh(col_pins[x]);
+  }
+}
+
+static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
+{
+    // Store last value of row prior to reading
+    matrix_row_t last_row_value = current_matrix[current_row];
+
+    // Clear data in matrix row
+    current_matrix[current_row] = 0;
+
+    // Select row and wait for row selecton to stabilize
+    select_row(current_row);
+    wait_us(30);
+
+    // For each col...
+    for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
+
+        // Select the col pin to read (active low)
+        uint8_t pin_state = readPin(col_pins[col_index]);
+
+        // Populate the matrix row with the state of the col pin
+        current_matrix[current_row] |=  pin_state ? 0 : (ROW_SHIFTER << col_index);
+    }
+
+    // Unselect row
+    unselect_row(current_row);
+
+    return (last_row_value != current_matrix[current_row]);
+}
+
+#elif (DIODE_DIRECTION == ROW2COL)
+
+static void select_col(uint8_t col)
+{
+    setPinOutput(col_pins[col]);
+    writePinLow(col_pins[col]);
+}
+
+static void unselect_col(uint8_t col)
+{
+    setPinInputHigh(col_pins[col]);
+}
+
+static void unselect_cols(void)
+{
+    for(uint8_t x = 0; x < MATRIX_COLS; x++) {
+        setPinInputHigh(col_pins[x]);
+    }
+}
+
+static void init_pins(void) {
+  unselect_cols();
+  for (uint8_t x = 0; x < MATRIX_ROWS; x++) {
+    setPinInputHigh(row_pins[x]);
+  }
+}
+
+static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
+{
+    bool matrix_changed = false;
+
+    // Select col and wait for col selecton to stabilize
+    select_col(current_col);
+    wait_us(30);
+
+    // For each row...
+    for(uint8_t row_index = 0; row_index < MATRIX_ROWS; row_index++)
+    {
+
+        // Store last value of row prior to reading
+        matrix_row_t last_row_value = current_matrix[row_index];
+
+        // Check row pin state
+        if (readPin(row_pins[row_index]) == 0)
+        {
+            // Pin LO, set col bit
+            current_matrix[row_index] |= (ROW_SHIFTER << current_col);
+        }
+        else
+        {
+            // Pin HI, clear col bit
+            current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
+        }
+
+        // Determine if the matrix changed state
+        if ((last_row_value != current_matrix[row_index]) && !(matrix_changed))
+        {
+            matrix_changed = true;
+        }
+    }
+
+    // Unselect col
+    unselect_col(current_col);
+
+    return matrix_changed;
+}
+
+#endif
+
+void matrix_init(void) {
+
+    // initialize key pins
+    init_pins();
+
+    // initialize matrix state: all keys off
+    for (uint8_t i=0; i < MATRIX_ROWS; i++) {
+        raw_matrix[i] = 0;
+        matrix[i] = 0;
+    }
+
+    debounce_init(MATRIX_ROWS);
+
+    matrix_init_quantum();
+}
+
+uint8_t matrix_scan(void)
+{
+  bool changed = false;
+
+#if defined(DIRECT_PINS) || (DIODE_DIRECTION == COL2ROW)
+  // Set row, read cols
+  for (uint8_t current_row = 0; current_row < MATRIX_ROWS; current_row++) {
+    changed |= read_cols_on_row(raw_matrix, current_row);
+  }
+#elif (DIODE_DIRECTION == ROW2COL)
+  // Set col, read rows
+  for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
+    changed |= read_rows_on_col(raw_matrix, current_col);
+  }
+#endif
+
+  debounce(raw_matrix, matrix, MATRIX_ROWS, changed);
+
+  matrix_scan_quantum();
+  return 1;
+}
diff --git a/keyboards/redscarf_iiplus/verd/readme.md b/keyboards/redscarf_iiplus/verd/readme.md
new file mode 100644
index 000000000..37ca69a66
--- /dev/null
+++ b/keyboards/redscarf_iiplus/verd/readme.md
@@ -0,0 +1,24 @@
+# Red Scarf II+ Ver.D (RS78)
+
+A 60% keyboard with a numpad on the right
+
+* Keyboard Maintainer: [Andy Lee](https://github.com/alittlepeace)
+* Hardware Supported: Ver.D (RS77)
+* Hardware Availability: [Drop](https://drop.com/buy/red-scarf-ii-plus-ver-d-custom-mechanical-keyboard-kit)
+
+
+Please note that QMK Firmware does not currently support controlling the underglow LEDs; however, if your board came with the remote, it can still be used to change the colour.
+
+## Flashing
+
+The flashing is sub-optimal. 
+
+Flashing the Red Scarf involves using Google Chrome, downloading an extension, and then flashing. For more detailed instructions please refer to [kairyu.gitbooks.io](https://kairyu.gitbooks.io/red-scarf-ii-plus-user-guide-how-to-custom-layout/content/online_reflash.html)
+
+---
+
+Make example for this keyboard (after setting up your build environment):
+
+    make redscarf_iiplus/verd:default
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
diff --git a/keyboards/redscarf_iiplus/verd/rules.mk b/keyboards/redscarf_iiplus/verd/rules.mk
new file mode 100644
index 000000000..89b1a5989
--- /dev/null
+++ b/keyboards/redscarf_iiplus/verd/rules.mk
@@ -0,0 +1,36 @@
+# MCU name
+MCU = atmega32u4
+
+# Bootloader selection
+#   Teensy       halfkay
+#   Pro Micro    caterina
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   ATmega32A    bootloadHID
+#   ATmega328P   USBasp
+BOOTLOADER = halfkay
+
+# Build Options
+#   change yes to no to disable
+#
+BOOTMAGIC_ENABLE = no       # Virtual DIP switch configuration
+MOUSEKEY_ENABLE = no        # Mouse keys
+EXTRAKEY_ENABLE = yes       # Audio control and System control
+CONSOLE_ENABLE = no         # Console for debug
+COMMAND_ENABLE = no         # Commands for debug and configuration
+                            # Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
+SLEEP_LED_ENABLE = no       # Breathing sleep LED during USB suspend
+                            # if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+NKRO_ENABLE = yes           # USB Nkey Rollover
+BACKLIGHT_ENABLE = yes      # Enable keyboard backlight functionality on B7 by default
+RGBLIGHT_ENABLE = no       # Enable keyboard RGB underglow
+MIDI_ENABLE = no            # MIDI support
+UNICODE_ENABLE = no         # Unicode
+BLUETOOTH_ENABLE = no       # Enable Bluetooth with the Adafruit EZ-Key HID
+AUDIO_ENABLE = no           # Audio output on port C6
+FAUXCLICKY_ENABLE = no      # Use buzzer to emulate clicky switches
+HD44780_ENABLE = no         # Enable support for HD44780 based LCDs
+
+CUSTOM_MATRIX = yes
+SRC += matrix.c
diff --git a/keyboards/redscarf_iiplus/verd/verd.c b/keyboards/redscarf_iiplus/verd/verd.c
new file mode 100644
index 000000000..6d2a8c97c
--- /dev/null
+++ b/keyboards/redscarf_iiplus/verd/verd.c
@@ -0,0 +1,42 @@
+/* Copyright 2019 Andy Lee <alee@alittlepeacemusic.com>
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "verd.h"
+
+// Optional override functions below.
+// You can leave any or all of these undefined.
+// These are only required if you want to perform custom actions.
+
+void matrix_init_kb(void) {
+    // put your keyboard start-up code here
+    // runs once when the firmware starts up
+
+    matrix_init_user();
+    led_init_ports();
+}
+
+void led_init_ports(void) {
+	setPinOutput(C7);
+	writePinHigh(C7);
+	setPinOutput(E6);
+	writePinHigh(E6);
+}
+
+bool led_update_kb(led_t led_state) {
+    if (led_update_user(led_state)) {
+        writePin(C7, !led_state.caps_lock);
+        writePin(E6, !led_state.num_lock);
+    }
+    return true;
+}
diff --git a/keyboards/redscarf_iiplus/verd/verd.h b/keyboards/redscarf_iiplus/verd/verd.h
new file mode 100644
index 000000000..b96dd0f6b
--- /dev/null
+++ b/keyboards/redscarf_iiplus/verd/verd.h
@@ -0,0 +1,55 @@
+/* Copyright 2019 Andy Lee <alee@alittlepeacemusic.com>
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+#include "quantum.h"
+
+#define ____ KC_NO
+
+/* This a shortcut to help you visually see your layout.
+ *
+ * The first section contains all of the arguments representing the physical
+ * layout of the board and position of the keys.
+ *
+ * The second converts the arguments into a two-dimensional array which
+ * represents the switch matrix.
+ */
+#define LAYOUT_60_ansi_numpad_split0( \
+	  K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, K017, \
+	  K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116,  \
+	  K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211,       K213, K214, K215, K216, K217, \
+	  K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312,       K314, K315, K316,  \
+	  K400, K401, K402,                                     K409, K410, K411, K412, K413, K414, K415, K416, K417  \
+) { \
+  { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, K017 }, \
+  { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, K217 }, \
+  { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, ____, K213, K214, K215, K216, ____ }, \
+  { K300, ____, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, ____, K314, K315, K316, ____ }, \
+  { K400, K401, K402, ____, ____, ____, ____, ____, ____, K409, K410, K411, K412, K413, K414, K415, K416, K417 } \
+}
+
+#define LAYOUT_60_ansi_numpad( \
+	  K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, K017, \
+	  K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116,  \
+	  K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211,       K213, K214, K215, K216, K217, \
+	  K300,       K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312,       K314, K315, K316,  \
+	  K400, K401, K402,                                     K409, K410, K411, K412, K413, K414,       K416, K417  \
+) { \
+  { K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, K017 }, \
+  { K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, K217 }, \
+  { K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, ____, K213, K214, K215, K216, ____ }, \
+  { K300, ____, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, ____, K314, K315, K316, ____ }, \
+  { K400, K401, K402, ____, ____, ____, ____, ____, ____, K409, K410, K411, K412, K413, K414, ____, K416, K417 } \
+}