From 9bea41c9b239916ae8786e7df02c29fad79ef459 Mon Sep 17 00:00:00 2001 From: ai03 Date: Sun, 10 Mar 2019 19:57:36 -0700 Subject: [PATCH] [Keyboard] Add Orbit keyboard (#5306) * Get things working except indicators * Attempt to get things working * hmm * Compiles but doesn't run * Make data transfer work * Get all indicators working * Remove old transport * Prepare for pullreq * Revert keymap from testing to production * Final error checking for pull request * Remove autogenerated is_command from config.h * Rewrite pin toggles using qmk functions --- keyboards/ai03/orbit/config.h | 249 ++++++++ keyboards/ai03/orbit/info.json | 0 keyboards/ai03/orbit/keymaps/default/keymap.c | 91 +++ .../ai03/orbit/keymaps/default/readme.md | 3 + keyboards/ai03/orbit/matrix.c | 328 +++++++++++ keyboards/ai03/orbit/matrix.h | 3 + keyboards/ai03/orbit/orbit.c | 228 ++++++++ keyboards/ai03/orbit/orbit.h | 65 +++ keyboards/ai03/orbit/readme.md | 15 + keyboards/ai03/orbit/rules.mk | 92 +++ keyboards/ai03/orbit/serial.c | 546 ++++++++++++++++++ keyboards/ai03/orbit/serial.h | 62 ++ keyboards/ai03/orbit/split_flags.c | 5 + keyboards/ai03/orbit/split_flags.h | 15 + keyboards/ai03/orbit/split_util.c | 87 +++ keyboards/ai03/orbit/split_util.h | 10 + keyboards/ai03/orbit/transport.c | 238 ++++++++ keyboards/ai03/orbit/transport.h | 42 ++ 18 files changed, 2079 insertions(+) create mode 100644 keyboards/ai03/orbit/config.h create mode 100644 keyboards/ai03/orbit/info.json create mode 100644 keyboards/ai03/orbit/keymaps/default/keymap.c create mode 100644 keyboards/ai03/orbit/keymaps/default/readme.md create mode 100644 keyboards/ai03/orbit/matrix.c create mode 100644 keyboards/ai03/orbit/matrix.h create mode 100644 keyboards/ai03/orbit/orbit.c create mode 100644 keyboards/ai03/orbit/orbit.h create mode 100644 keyboards/ai03/orbit/readme.md create mode 100644 keyboards/ai03/orbit/rules.mk create mode 100644 keyboards/ai03/orbit/serial.c create mode 100644 keyboards/ai03/orbit/serial.h create mode 100644 keyboards/ai03/orbit/split_flags.c create mode 100644 keyboards/ai03/orbit/split_flags.h create mode 100644 keyboards/ai03/orbit/split_util.c create mode 100644 keyboards/ai03/orbit/split_util.h create mode 100644 keyboards/ai03/orbit/transport.c create mode 100644 keyboards/ai03/orbit/transport.h diff --git a/keyboards/ai03/orbit/config.h b/keyboards/ai03/orbit/config.h new file mode 100644 index 000000000..f4dc4fd63 --- /dev/null +++ b/keyboards/ai03/orbit/config.h @@ -0,0 +1,249 @@ +/* +Copyright 2018 Ryota Goto + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#pragma once + +#include "config_common.h" + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xA103 +#define PRODUCT_ID 0x0003 +#define DEVICE_VER 0x0003 +#define MANUFACTURER ai03 Keyboard Designs +#define PRODUCT Orbit +#define DESCRIPTION Split ergonomic keyboard + +/* key matrix size */ +#define MATRIX_ROWS 10 // Double rows for split keyboards. Orbit has 5, so define 10 +#define MATRIX_COLS 7 + +/* + * Keyboard Matrix Assignments + * + * Change this to how you wired your keyboard + * COLS: AVR pins used for columns, left to right + * ROWS: AVR pins used for rows, top to bottom + * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode) + * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode) + * +*/ +#define MATRIX_ROW_PINS { F7, F6, F5, F4, D3 } +#define MATRIX_COL_PINS { C7, B4, D7, D6, D4, F1, F0 } +#define MATRIX_ROW_PINS_RIGHT { B6, B5, B4, D7, E6 } +#define MATRIX_COL_PINS_RIGHT { D4, D6, F1, F0, F4, F5, C6 } + +#define SPLIT_HAND_PIN D5 + +//#define USE_I2C + +#define SELECT_SOFT_SERIAL_SPEED 1 + +#define UNUSED_PINS + +/* COL2ROW, ROW2COL, or CUSTOM_MATRIX */ +#define DIODE_DIRECTION COL2ROW + +/* + * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. + */ +#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6 + +#define BACKLIGHT_PIN B7 +// #define BACKLIGHT_BREATHING +#define BACKLIGHT_LEVELS 3 + +// #define RGB_DI_PIN E2 +// #ifdef RGB_DI_PIN +// #define RGBLED_NUM 16 +// #define RGBLIGHT_HUE_STEP 8 +// #define RGBLIGHT_SAT_STEP 8 +// #define RGBLIGHT_VAL_STEP 8 +// #define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */ +// #define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */ +// /*== all animations enable ==*/ +// #define RGBLIGHT_ANIMATIONS +// /*== or choose animations ==*/ +// #define RGBLIGHT_EFFECT_BREATHING +// #define RGBLIGHT_EFFECT_RAINBOW_MOOD +// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL +// #define RGBLIGHT_EFFECT_SNAKE +// #define RGBLIGHT_EFFECT_KNIGHT +// #define RGBLIGHT_EFFECT_CHRISTMAS +// #define RGBLIGHT_EFFECT_STATIC_GRADIENT +// #define RGBLIGHT_EFFECT_RGB_TEST +// #define RGBLIGHT_EFFECT_ALTERNATING +// #endif + +/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */ +#define DEBOUNCING_DELAY 5 + +/* define if matrix has ghost (lacks anti-ghosting diodes) */ +//#define MATRIX_HAS_GHOST + +/* number of backlight levels */ + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* If defined, GRAVE_ESC will always act as ESC when CTRL is held. + * This is userful for the Windows task manager shortcut (ctrl+shift+esc). + */ +// #define GRAVE_ESC_CTRL_OVERRIDE + +/* + * Force NKRO + * + * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved + * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the + * makefile for this to work.) + * + * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N) + * until the next keyboard reset. + * + * NKRO may prevent your keystrokes from being detected in the BIOS, but it is + * fully operational during normal computer usage. + * + * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N) + * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by + * bootmagic, NKRO mode will always be enabled until it is toggled again during a + * power-up. + * + */ +//#define FORCE_NKRO + +/* + * Magic Key Options + * + * Magic keys are hotkey commands that allow control over firmware functions of + * the keyboard. They are best used in combination with the HID Listen program, + * found here: https://www.pjrc.com/teensy/hid_listen.html + * + * The options below allow the magic key functionality to be changed. This is + * useful if your keyboard/keypad is missing keys and you want magic key support. + * + */ + +/* control how magic key switches layers */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false + +/* override magic key keymap */ +//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS +//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM +//#define MAGIC_KEY_HELP1 H +//#define MAGIC_KEY_HELP2 SLASH +//#define MAGIC_KEY_DEBUG D +//#define MAGIC_KEY_DEBUG_MATRIX X +//#define MAGIC_KEY_DEBUG_KBD K +//#define MAGIC_KEY_DEBUG_MOUSE M +//#define MAGIC_KEY_VERSION V +//#define MAGIC_KEY_STATUS S +//#define MAGIC_KEY_CONSOLE C +//#define MAGIC_KEY_LAYER0_ALT1 ESC +//#define MAGIC_KEY_LAYER0_ALT2 GRAVE +//#define MAGIC_KEY_LAYER0 0 +//#define MAGIC_KEY_LAYER1 1 +//#define MAGIC_KEY_LAYER2 2 +//#define MAGIC_KEY_LAYER3 3 +//#define MAGIC_KEY_LAYER4 4 +//#define MAGIC_KEY_LAYER5 5 +//#define MAGIC_KEY_LAYER6 6 +//#define MAGIC_KEY_LAYER7 7 +//#define MAGIC_KEY_LAYER8 8 +//#define MAGIC_KEY_LAYER9 9 +//#define MAGIC_KEY_BOOTLOADER PAUSE +//#define MAGIC_KEY_LOCK CAPS +//#define MAGIC_KEY_EEPROM E +//#define MAGIC_KEY_NKRO N +//#define MAGIC_KEY_SLEEP_LED Z + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +/* + * MIDI options + */ + +/* Prevent use of disabled MIDI features in the keymap */ +//#define MIDI_ENABLE_STRICT 1 + +/* enable basic MIDI features: + - MIDI notes can be sent when in Music mode is on +*/ +//#define MIDI_BASIC + +/* enable advanced MIDI features: + - MIDI notes can be added to the keymap + - Octave shift and transpose + - Virtual sustain, portamento, and modulation wheel + - etc. +*/ +//#define MIDI_ADVANCED + +/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */ +//#define MIDI_TONE_KEYCODE_OCTAVES 1 + +/* + * HD44780 LCD Display Configuration + */ +/* +#define LCD_LINES 2 //< number of visible lines of the display +#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display + +#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode + +#if LCD_IO_MODE +#define LCD_PORT PORTB //< port for the LCD lines +#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0 +#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1 +#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2 +#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3 +#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0 +#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1 +#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2 +#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3 +#define LCD_RS_PORT LCD_PORT //< port for RS line +#define LCD_RS_PIN 3 //< pin for RS line +#define LCD_RW_PORT LCD_PORT //< port for RW line +#define LCD_RW_PIN 2 //< pin for RW line +#define LCD_E_PORT LCD_PORT //< port for Enable line +#define LCD_E_PIN 1 //< pin for Enable line +#endif +*/ + +/* Bootmagic Lite key configuration */ +// #define BOOTMAGIC_LITE_ROW 0 +// #define BOOTMAGIC_LITE_COLUMN 0 diff --git a/keyboards/ai03/orbit/info.json b/keyboards/ai03/orbit/info.json new file mode 100644 index 000000000..e69de29bb diff --git a/keyboards/ai03/orbit/keymaps/default/keymap.c b/keyboards/ai03/orbit/keymaps/default/keymap.c new file mode 100644 index 000000000..4c8c39fb0 --- /dev/null +++ b/keyboards/ai03/orbit/keymaps/default/keymap.c @@ -0,0 +1,91 @@ +/* Copyright 2018 Ryota Goto + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include QMK_KEYBOARD_H + +// Defines the keycodes used by our macros in process_record_user +enum custom_keycodes { + MANUAL = SAFE_RANGE, + DBLZERO +}; + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( /* Base */ + TO(1), KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_LBRC, KC_BSPC, \ + TO(1), KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_RBRC, KC_BSLS, \ + KC_NO, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_NO, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_PSCR, KC_DEL, \ + KC_LCTL, KC_LCTL, KC_LGUI, KC_LALT, MO(1), KC_SPC, KC_SPC, MO(2), KC_GRV, KC_MENU, KC_MINS, KC_EQL + ), + [1] = LAYOUT( /* Fn, Arrowkeys, Media control, Backlight */ + TO(2), _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_VOLU, _______, \ + TO(2), _______, _______, KC_PGUP, _______, _______, KC_F11, KC_F12, _______, KC_UP, _______, _______, KC_VOLD, BL_STEP, \ + TO(0), _______, KC_HOME, KC_PGDN, KC_END, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_MPLY, _______, \ + TO(0), _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_INS, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ), + [2] = LAYOUT( /* Mousekeys and Numpad */ + KC_NO, _______, _______, _______, _______, _______, _______, KC_NLCK, KC_P7, KC_P8, KC_P9, KC_PSLS, _______, _______, \ + KC_NO, _______, KC_BTN1, KC_MS_U, KC_BTN2, KC_WH_U, _______, _______, KC_P4, KC_P5, KC_P6, KC_PAST, _______, _______, \ + TO(1), _______, KC_MS_L, KC_MS_D, KC_MS_R, KC_WH_D, _______, _______, KC_P1, KC_P2, KC_P3, KC_PMNS, _______, _______, \ + TO(1), _______, KC_ACL0, KC_ACL1, KC_ACL2, KC_BTN3, _______, DBLZERO, KC_P0, KC_PDOT, KC_PENT, KC_PPLS, _______, MANUAL, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ + ) +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case MANUAL: + if (record->event.pressed) + { + // Keypress + SEND_STRING("https://kb.ai03.me/redir/orbit"); + } + else + { + // Key release + } + break; + case DBLZERO: + if (record->event.pressed) + { + // Keypress + SEND_STRING("00"); + } + else + { + // Key release + } + break; + } + return true; +} + +void matrix_init_user(void) { + +} + +void matrix_scan_user(void) { + +} + +void led_set_user(uint8_t usb_led) { + +} + +uint32_t layer_state_set_user(uint32_t state) { + + return state; +} diff --git a/keyboards/ai03/orbit/keymaps/default/readme.md b/keyboards/ai03/orbit/keymaps/default/readme.md new file mode 100644 index 000000000..63c528abf --- /dev/null +++ b/keyboards/ai03/orbit/keymaps/default/readme.md @@ -0,0 +1,3 @@ +# The default keymap for Orbit + +[KLE of layout](http://www.keyboard-layout-editor.com/#/gists/53ebf59524de12515cb7e2e6de94f0d6) \ No newline at end of file diff --git a/keyboards/ai03/orbit/matrix.c b/keyboards/ai03/orbit/matrix.c new file mode 100644 index 000000000..a1509666c --- /dev/null +++ b/keyboards/ai03/orbit/matrix.c @@ -0,0 +1,328 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +/* + * scan matrix + */ +#include +#include +#include "wait.h" +#include "util.h" +#include "matrix.h" +#include "split_util.h" +#include "config.h" +#include "split_flags.h" +#include "quantum.h" +#include "debounce.h" +#include "transport.h" + +#if (MATRIX_COLS <= 8) +# define print_matrix_header() print("\nr/c 01234567\n") +# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row)) +# define matrix_bitpop(i) bitpop(matrix[i]) +# define ROW_SHIFTER ((uint8_t)1) +#elif (MATRIX_COLS <= 16) +# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n") +# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row)) +# define matrix_bitpop(i) bitpop16(matrix[i]) +# define ROW_SHIFTER ((uint16_t)1) +#elif (MATRIX_COLS <= 32) +# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n") +# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row)) +# define matrix_bitpop(i) bitpop32(matrix[i]) +# define ROW_SHIFTER ((uint32_t)1) +#endif + +#define ERROR_DISCONNECT_COUNT 5 + +//#define ROWS_PER_HAND (MATRIX_ROWS / 2) + +#ifdef DIRECT_PINS +static pin_t direct_pins[MATRIX_ROWS][MATRIX_COLS] = DIRECT_PINS; +#else +static pin_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; +static pin_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; +#endif + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t raw_matrix[ROWS_PER_HAND]; + +// row offsets for each hand +uint8_t thisHand, thatHand; + +// user-defined overridable functions + +__attribute__((weak)) void matrix_init_kb(void) { matrix_init_user(); } + +__attribute__((weak)) void matrix_scan_kb(void) { matrix_scan_user(); } + +__attribute__((weak)) void matrix_init_user(void) {} + +__attribute__((weak)) void matrix_scan_user(void) {} + +__attribute__((weak)) void matrix_slave_scan_user(void) {} + +// helper functions + +inline uint8_t matrix_rows(void) { return MATRIX_ROWS; } + +inline uint8_t matrix_cols(void) { return MATRIX_COLS; } + +bool matrix_is_modified(void) { + if (debounce_active()) return false; + return true; +} + +inline bool matrix_is_on(uint8_t row, uint8_t col) { return (matrix[row] & ((matrix_row_t)1 << col)); } + +inline matrix_row_t matrix_get_row(uint8_t row) { return matrix[row]; } + +void matrix_print(void) { + print_matrix_header(); + + for (uint8_t row = 0; row < MATRIX_ROWS; row++) { + phex(row); + print(": "); + print_matrix_row(row); + print("\n"); + } +} + +uint8_t matrix_key_count(void) { + uint8_t count = 0; + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + count += matrix_bitpop(i); + } + return count; +} + +// matrix code + +#ifdef DIRECT_PINS + +static void init_pins(void) { + for (int row = 0; row < MATRIX_ROWS; row++) { + for (int col = 0; col < MATRIX_COLS; col++) { + pin_t pin = direct_pins[row][col]; + if (pin != NO_PIN) { + setPinInputHigh(pin); + } + } + } +} + +static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) { + matrix_row_t last_row_value = current_matrix[current_row]; + current_matrix[current_row] = 0; + + for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) { + pin_t pin = direct_pins[current_row][col_index]; + if (pin != NO_PIN) { + current_matrix[current_row] |= readPin(pin) ? 0 : (ROW_SHIFTER << col_index); + } + } + + return (last_row_value != current_matrix[current_row]); +} + +#elif (DIODE_DIRECTION == COL2ROW) + +static void select_row(uint8_t row) { + setPinOutput(row_pins[row]); + writePinLow(row_pins[row]); +} + +static void unselect_row(uint8_t row) { setPinInputHigh(row_pins[row]); } + +static void unselect_rows(void) { + for (uint8_t x = 0; x < ROWS_PER_HAND; x++) { + setPinInputHigh(row_pins[x]); + } +} + +static void init_pins(void) { + unselect_rows(); + for (uint8_t x = 0; x < MATRIX_COLS; x++) { + setPinInputHigh(col_pins[x]); + } +} + +static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row) { + // Store last value of row prior to reading + matrix_row_t last_row_value = current_matrix[current_row]; + + // Clear data in matrix row + current_matrix[current_row] = 0; + + // Select row and wait for row selecton to stabilize + select_row(current_row); + wait_us(30); + + // For each col... + for (uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) { + // Populate the matrix row with the state of the col pin + current_matrix[current_row] |= readPin(col_pins[col_index]) ? 0 : (ROW_SHIFTER << col_index); + } + + // Unselect row + unselect_row(current_row); + + return (last_row_value != current_matrix[current_row]); +} + +#elif (DIODE_DIRECTION == ROW2COL) + +static void select_col(uint8_t col) { + setPinOutput(col_pins[col]); + writePinLow(col_pins[col]); +} + +static void unselect_col(uint8_t col) { setPinInputHigh(col_pins[col]); } + +static void unselect_cols(void) { + for (uint8_t x = 0; x < MATRIX_COLS; x++) { + setPinInputHigh(col_pins[x]); + } +} + +static void init_pins(void) { + unselect_cols(); + for (uint8_t x = 0; x < ROWS_PER_HAND; x++) { + setPinInputHigh(row_pins[x]); + } +} + +static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col) { + bool matrix_changed = false; + + // Select col and wait for col selecton to stabilize + select_col(current_col); + wait_us(30); + + // For each row... + for (uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++) { + // Store last value of row prior to reading + matrix_row_t last_row_value = current_matrix[row_index]; + + // Check row pin state + if (readPin(row_pins[row_index])) { + // Pin HI, clear col bit + current_matrix[row_index] &= ~(ROW_SHIFTER << current_col); + } else { + // Pin LO, set col bit + current_matrix[row_index] |= (ROW_SHIFTER << current_col); + } + + // Determine if the matrix changed state + if ((last_row_value != current_matrix[row_index]) && !(matrix_changed)) { + matrix_changed = true; + } + } + + // Unselect col + unselect_col(current_col); + + return matrix_changed; +} + +#endif + +void matrix_init(void) { + debug_enable = true; + debug_matrix = true; + debug_mouse = true; + + // Set pinout for right half if pinout for that half is defined + if (!isLeftHand) { +#ifdef MATRIX_ROW_PINS_RIGHT + const uint8_t row_pins_right[MATRIX_ROWS] = MATRIX_ROW_PINS_RIGHT; + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + row_pins[i] = row_pins_right[i]; + } +#endif +#ifdef MATRIX_COL_PINS_RIGHT + const uint8_t col_pins_right[MATRIX_COLS] = MATRIX_COL_PINS_RIGHT; + for (uint8_t i = 0; i < MATRIX_COLS; i++) { + col_pins[i] = col_pins_right[i]; + } +#endif + } + + thisHand = isLeftHand ? 0 : (ROWS_PER_HAND); + thatHand = ROWS_PER_HAND - thisHand; + + // initialize key pins + init_pins(); + + // initialize matrix state: all keys off + for (uint8_t i = 0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + } + + debounce_init(ROWS_PER_HAND); + + matrix_init_quantum(); +} + +uint8_t _matrix_scan(void) { + bool changed = false; + +#if defined(DIRECT_PINS) || (DIODE_DIRECTION == COL2ROW) + // Set row, read cols + for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) { + changed |= read_cols_on_row(raw_matrix, current_row); + } +#elif (DIODE_DIRECTION == ROW2COL) + // Set col, read rows + for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) { + changed |= read_rows_on_col(raw_matrix, current_col); + } +#endif + + debounce(raw_matrix, matrix + thisHand, ROWS_PER_HAND, changed); + + return 1; +} + +uint8_t matrix_scan(void) { + uint8_t ret = _matrix_scan(); + + if (is_keyboard_master()) { + static uint8_t error_count; + + if (!transport_master(matrix + thatHand)) { + error_count++; + + if (error_count > ERROR_DISCONNECT_COUNT) { + // reset other half if disconnected + for (int i = 0; i < ROWS_PER_HAND; ++i) { + matrix[thatHand + i] = 0; + } + } + } else { + error_count = 0; + } + + matrix_scan_quantum(); + } else { + transport_slave(matrix + thisHand); + matrix_slave_scan_user(); + } + + return ret; +} diff --git a/keyboards/ai03/orbit/matrix.h b/keyboards/ai03/orbit/matrix.h new file mode 100644 index 000000000..c2bdd3098 --- /dev/null +++ b/keyboards/ai03/orbit/matrix.h @@ -0,0 +1,3 @@ +#pragma once + +#include diff --git a/keyboards/ai03/orbit/orbit.c b/keyboards/ai03/orbit/orbit.c new file mode 100644 index 000000000..2f149875b --- /dev/null +++ b/keyboards/ai03/orbit/orbit.c @@ -0,0 +1,228 @@ +/* Copyright 2018 Ryota Goto + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#include "orbit.h" +#include "split_util.h" +#include "transport.h" + + +// Call led_toggle to set LEDs easily +// LED IDs: +// +// (LEFT) 0 1 2 | 3 4 5 (RIGHT) + +void led_toggle(int id, bool on) { + + if (isLeftHand) { + switch(id) { + case 0: + // Left hand C6 + if (on) + //PORTC |= (1<<6); + writePinHigh(C6); + else + //PORTC &= ~(1<<6); + writePinLow(C6); + break; + case 1: + // Left hand B6 + if (on) + //PORTB |= (1<<6); + writePinHigh(B6); + else + //PORTB &= ~(1<<6); + writePinLow(B6); + break; + case 2: + // Left hand B5 + if (on) + //PORTB |= (1<<5); + writePinHigh(B5); + else + //PORTB &= ~(1<<5); + writePinLow(B5); + break; + default: + break; + } + } else { + switch(id) { + case 3: + // Right hand F6 + if (on) + //PORTF |= (1<<6); + writePinHigh(F6); + else + //PORTF &= ~(1<<6); + writePinLow(F6); + break; + case 4: + // Right hand F7 + if (on) + //PORTF |= (1<<7); + writePinHigh(F7); + else + //PORTF &= ~(1<<7); + writePinLow(F7); + break; + case 5: + // Right hand C7 + if (on) + //PORTC |= (1<<7); + writePinHigh(C7); + else + //PORTC &= ~(1<<7); + writePinLow(C7); + break; + default: + break; + } + } +} + +// Set all LEDs at once using an array of 6 booleans +// LED IDs: +// +// (LEFT) 0 1 2 | 3 4 5 (RIGHT) +// +// Ex. set_all_leds({ false, false, false, true, true, true }) would turn off left hand, turn on right hand + +void set_all_leds(bool leds[6]) { + for (int i = 0; i < 6; i++) { + led_toggle(i, leds[i]); + } +} + +void set_layer_indicators(uint8_t layer) { + + switch (layer) + { + case 0: + led_toggle(0, true); + led_toggle(1, false); + led_toggle(2, false); + break; + case 1: + led_toggle(0, true); + led_toggle(1, true); + led_toggle(2, false); + break; + case 2: + led_toggle(0, true); + led_toggle(1, true); + led_toggle(2, true); + break; + case 3: + led_toggle(0, false); + led_toggle(1, true); + led_toggle(2, true); + break; + case 4: + led_toggle(0, false); + led_toggle(1, false); + led_toggle(2, true); + break; + default: + led_toggle(0, true); + led_toggle(1, false); + led_toggle(2, true); + break; + } + +} + +void matrix_init_kb(void) { + // put your keyboard start-up code here + // runs once when the firmware starts up + + // Initialize indicator LEDs to output + if (isLeftHand) + { + setPinOutput(C6); + setPinOutput(B6); + setPinOutput(B5); + //DDRC |= (1<<6); + //DDRB |= (1<<6); + //DDRB |= (1<<5); + } + else + { + setPinOutput(F6); + setPinOutput(F7); + setPinOutput(C7); + //DDRF |= (1<<6); + //DDRF |= (1<<7); + //DDRC |= (1<<7); + } + + set_layer_indicators(0); + + matrix_init_user(); +} + +void matrix_scan_kb(void) { + // put your looping keyboard code here + // runs every cycle (a lot) + + matrix_scan_user(); +} + +bool process_record_kb(uint16_t keycode, keyrecord_t *record) { + // put your per-action keyboard code here + // runs for every action, just before processing by the firmware + + return process_record_user(keycode, record); +} + +void led_set_kb(uint8_t usb_led) { + // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here + + if (is_keyboard_master()) { + + serial_m2s_buffer.nlock_led = IS_LED_ON(usb_led, USB_LED_NUM_LOCK); + serial_m2s_buffer.clock_led = IS_LED_ON(usb_led, USB_LED_CAPS_LOCK); + serial_m2s_buffer.slock_led = IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK); + + led_toggle(3, IS_LED_ON(usb_led, USB_LED_NUM_LOCK)); + led_toggle(4, IS_LED_ON(usb_led, USB_LED_CAPS_LOCK)); + led_toggle(5, IS_LED_ON(usb_led, USB_LED_SCROLL_LOCK)); + + } + + led_set_user(usb_led); +} + +uint32_t layer_state_set_kb(uint32_t state) { + + if (is_keyboard_master()) + { + + current_layer = biton32(state); + serial_m2s_buffer.current_layer = biton32(state); + + // If left half, do the LED toggle thing + if (isLeftHand) + { + set_layer_indicators(biton32(state)); + } + + } + // NOTE: Do not set slave LEDs here. + // This is not called on slave + + return layer_state_set_user(state); +} + + diff --git a/keyboards/ai03/orbit/orbit.h b/keyboards/ai03/orbit/orbit.h new file mode 100644 index 000000000..211b9ebca --- /dev/null +++ b/keyboards/ai03/orbit/orbit.h @@ -0,0 +1,65 @@ +/* Copyright 2018 Ryota Goto + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#ifndef ORBIT_H +#define ORBIT_H + +#include "quantum.h" + +/* This a shortcut to help you visually see your layout. + * + * The first section contains all of the arguments representing the physical + * layout of the board and position of the keys. + * + * The second converts the arguments into a two-dimensional array which + * represents the switch matrix. + */ + +#ifdef USE_I2C +#include +#ifdef __AVR__ + #include + #include +#endif +#endif + + +#define LAYOUT( \ + L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \ + L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \ + L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \ + L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36, \ + L41, L42, L43, L44, L45, L46, R40, R41, R42, R43, R44, R45 \ +) \ +{ \ + { L00, L01, L02, L03, L04, L05, L06 }, \ + { L10, L11, L12, L13, L14, L15, L16 }, \ + { L20, L21, L22, L23, L24, L25, L26 }, \ + { L30, L31, L32, L33, L34, L35, L36 }, \ + { KC_NO, L41, L42, L43, L44, L45, L46 }, \ + { R00, R01, R02, R03, R04, R05, R06 }, \ + { R10, R11, R12, R13, R14, R15, R16 }, \ + { R20, R21, R22, R23, R24, R25, R26 }, \ + { R30, R31, R32, R33, R34, R35, R36 }, \ + { R40, R41, R42, R43, R44, R45, KC_NO } \ +} + +uint8_t current_layer; + +extern void led_toggle(int id, bool on); +void set_all_leds(bool leds[6]); +extern void set_layer_indicators(uint8_t layer); + +#endif diff --git a/keyboards/ai03/orbit/readme.md b/keyboards/ai03/orbit/readme.md new file mode 100644 index 000000000..58ba2079d --- /dev/null +++ b/keyboards/ai03/orbit/readme.md @@ -0,0 +1,15 @@ +# Orbit + +![Orbit](https://raw.githubusercontent.com/ai03-2725/Orbit/master/Images/PCB-R2.0.jpg) + +A split ergonomic keyboard project. + +Keyboard Maintainer: [ai03](https://github.com/ai03-2725) +Hardware Supported: The [Orbit PCB](https://github.com/ai03-2725/Orbit) +Hardware Availability: [This repository](https://github.com/ai03-2725/Orbit) has PCB files. Case group buy orders are currently closed. + +Make example for this keyboard (after setting up your build environment): + + make ai03/orbit:default + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). diff --git a/keyboards/ai03/orbit/rules.mk b/keyboards/ai03/orbit/rules.mk new file mode 100644 index 000000000..4b40e47cb --- /dev/null +++ b/keyboards/ai03/orbit/rules.mk @@ -0,0 +1,92 @@ +SRC += split_util.c \ + split_flags.c \ + serial.c \ + transport.c \ + matrix.c + +# MCU name +#MCU = at90usb1286 +MCU = atmega32u4 + +# Processor frequency. +# This will define a symbol, F_CPU, in all source code files equal to the +# processor frequency in Hz. You can then use this symbol in your source code to +# calculate timings. Do NOT tack on a 'UL' at the end, this will be done +# automatically to create a 32-bit value in your source code. +# +# This will be an integer division of F_USB below, as it is sourced by +# F_USB after it has run through any CPU prescalers. Note that this value +# does not *change* the processor frequency - it should merely be updated to +# reflect the processor speed set externally so that the code can use accurate +# software delays. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task(+60) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Bootloader selection +# Teensy halfkay +# Pro Micro caterina +# Atmel DFU atmel-dfu +# LUFA DFU lufa-dfu +# QMK DFU qmk-dfu +# atmega32a bootloadHID +BOOTLOADER = atmel-dfu + + +# If you don't know the bootloader type, then you can specify the +# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line +# Teensy halfKay 512 +# Teensy++ halfKay 1024 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +# USBaspLoader 2048 +# OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = no # Console for debug(+400) +COMMAND_ENABLE = no # Commands for debug and configuration +# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE +SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend +# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +NKRO_ENABLE = yes # USB Nkey Rollover +BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config) +UNICODE_ENABLE = no # Unicode +BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID +AUDIO_ENABLE = no # Audio output on port C6 +FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches +HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400) +USE_I2C = no # I2C for split communication +CUSTOM_MATRIX = yes # For providing custom matrix.c (in this case, override regular matrix.c with split matrix.c) +# SPLIT_KEYBOARD = yes # Split keyboard flag disabled as manual edits had to be done to the split common files + + diff --git a/keyboards/ai03/orbit/serial.c b/keyboards/ai03/orbit/serial.c new file mode 100644 index 000000000..1315377a3 --- /dev/null +++ b/keyboards/ai03/orbit/serial.c @@ -0,0 +1,546 @@ +/* + * WARNING: be careful changing this code, it is very timing dependent + * + * 2018-10-28 checked + * avr-gcc 4.9.2 + * avr-gcc 5.4.0 + * avr-gcc 7.3.0 + */ + +#ifndef F_CPU +#define F_CPU 16000000 +#endif + +#include +#include +#include +#include +#include +#include "serial.h" +//#include + +#ifdef SOFT_SERIAL_PIN + +#ifdef __AVR_ATmega32U4__ + // if using ATmega32U4 I2C, can not use PD0 and PD1 in soft serial. + #ifdef USE_AVR_I2C + #if SOFT_SERIAL_PIN == D0 || SOFT_SERIAL_PIN == D1 + #error Using ATmega32U4 I2C, so can not use PD0, PD1 + #endif + #endif + + #if SOFT_SERIAL_PIN >= D0 && SOFT_SERIAL_PIN <= D3 + #define SERIAL_PIN_DDR DDRD + #define SERIAL_PIN_PORT PORTD + #define SERIAL_PIN_INPUT PIND + #if SOFT_SERIAL_PIN == D0 + #define SERIAL_PIN_MASK _BV(PD0) + #define EIMSK_BIT _BV(INT0) + #define EICRx_BIT (~(_BV(ISC00) | _BV(ISC01))) + #define SERIAL_PIN_INTERRUPT INT0_vect + #elif SOFT_SERIAL_PIN == D1 + #define SERIAL_PIN_MASK _BV(PD1) + #define EIMSK_BIT _BV(INT1) + #define EICRx_BIT (~(_BV(ISC10) | _BV(ISC11))) + #define SERIAL_PIN_INTERRUPT INT1_vect + #elif SOFT_SERIAL_PIN == D2 + #define SERIAL_PIN_MASK _BV(PD2) + #define EIMSK_BIT _BV(INT2) + #define EICRx_BIT (~(_BV(ISC20) | _BV(ISC21))) + #define SERIAL_PIN_INTERRUPT INT2_vect + #elif SOFT_SERIAL_PIN == D3 + #define SERIAL_PIN_MASK _BV(PD3) + #define EIMSK_BIT _BV(INT3) + #define EICRx_BIT (~(_BV(ISC30) | _BV(ISC31))) + #define SERIAL_PIN_INTERRUPT INT3_vect + #endif + #elif SOFT_SERIAL_PIN == E6 + #define SERIAL_PIN_DDR DDRE + #define SERIAL_PIN_PORT PORTE + #define SERIAL_PIN_INPUT PINE + #define SERIAL_PIN_MASK _BV(PE6) + #define EIMSK_BIT _BV(INT6) + #define EICRx_BIT (~(_BV(ISC60) | _BV(ISC61))) + #define SERIAL_PIN_INTERRUPT INT6_vect + #else + #error invalid SOFT_SERIAL_PIN value + #endif + +#else + #error serial.c now support ATmega32U4 only +#endif + +#define ALWAYS_INLINE __attribute__((always_inline)) +#define NO_INLINE __attribute__((noinline)) +#define _delay_sub_us(x) __builtin_avr_delay_cycles(x) + +// parity check +#define ODD_PARITY 1 +#define EVEN_PARITY 0 +#define PARITY EVEN_PARITY + +#ifdef SERIAL_DELAY + // custom setup in config.h + // #define TID_SEND_ADJUST 2 + // #define SERIAL_DELAY 6 // micro sec + // #define READ_WRITE_START_ADJUST 30 // cycles + // #define READ_WRITE_WIDTH_ADJUST 8 // cycles +#else +// ============ Standard setups ============ + +#ifndef SELECT_SOFT_SERIAL_SPEED +#define SELECT_SOFT_SERIAL_SPEED 1 +// 0: about 189kbps (Experimental only) +// 1: about 137kbps (default) +// 2: about 75kbps +// 3: about 39kbps +// 4: about 26kbps +// 5: about 20kbps +#endif + +#if __GNUC__ < 6 + #define TID_SEND_ADJUST 14 +#else + #define TID_SEND_ADJUST 2 +#endif + +#if SELECT_SOFT_SERIAL_SPEED == 0 + // Very High speed + #define SERIAL_DELAY 4 // micro sec + #if __GNUC__ < 6 + #define READ_WRITE_START_ADJUST 33 // cycles + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_START_ADJUST 34 // cycles + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#elif SELECT_SOFT_SERIAL_SPEED == 1 + // High speed + #define SERIAL_DELAY 6 // micro sec + #if __GNUC__ < 6 + #define READ_WRITE_START_ADJUST 30 // cycles + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_START_ADJUST 33 // cycles + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#elif SELECT_SOFT_SERIAL_SPEED == 2 + // Middle speed + #define SERIAL_DELAY 12 // micro sec + #define READ_WRITE_START_ADJUST 30 // cycles + #if __GNUC__ < 6 + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#elif SELECT_SOFT_SERIAL_SPEED == 3 + // Low speed + #define SERIAL_DELAY 24 // micro sec + #define READ_WRITE_START_ADJUST 30 // cycles + #if __GNUC__ < 6 + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#elif SELECT_SOFT_SERIAL_SPEED == 4 + // Very Low speed + #define SERIAL_DELAY 36 // micro sec + #define READ_WRITE_START_ADJUST 30 // cycles + #if __GNUC__ < 6 + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#elif SELECT_SOFT_SERIAL_SPEED == 5 + // Ultra Low speed + #define SERIAL_DELAY 48 // micro sec + #define READ_WRITE_START_ADJUST 30 // cycles + #if __GNUC__ < 6 + #define READ_WRITE_WIDTH_ADJUST 3 // cycles + #else + #define READ_WRITE_WIDTH_ADJUST 7 // cycles + #endif +#else +#error invalid SELECT_SOFT_SERIAL_SPEED value +#endif /* SELECT_SOFT_SERIAL_SPEED */ +#endif /* SERIAL_DELAY */ + +#define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2) +#define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2) + +#define SLAVE_INT_WIDTH_US 1 +#ifndef SERIAL_USE_MULTI_TRANSACTION + #define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY +#else + #define SLAVE_INT_ACK_WIDTH_UNIT 2 + #define SLAVE_INT_ACK_WIDTH 4 +#endif + +static SSTD_t *Transaction_table = NULL; +static uint8_t Transaction_table_size = 0; + +inline static void serial_delay(void) ALWAYS_INLINE; +inline static +void serial_delay(void) { + _delay_us(SERIAL_DELAY); +} + +inline static void serial_delay_half1(void) ALWAYS_INLINE; +inline static +void serial_delay_half1(void) { + _delay_us(SERIAL_DELAY_HALF1); +} + +inline static void serial_delay_half2(void) ALWAYS_INLINE; +inline static +void serial_delay_half2(void) { + _delay_us(SERIAL_DELAY_HALF2); +} + +inline static void serial_output(void) ALWAYS_INLINE; +inline static +void serial_output(void) { + SERIAL_PIN_DDR |= SERIAL_PIN_MASK; +} + +// make the serial pin an input with pull-up resistor +inline static void serial_input_with_pullup(void) ALWAYS_INLINE; +inline static +void serial_input_with_pullup(void) { + SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; + SERIAL_PIN_PORT |= SERIAL_PIN_MASK; +} + +inline static uint8_t serial_read_pin(void) ALWAYS_INLINE; +inline static +uint8_t serial_read_pin(void) { + return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); +} + +inline static void serial_low(void) ALWAYS_INLINE; +inline static +void serial_low(void) { + SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; +} + +inline static void serial_high(void) ALWAYS_INLINE; +inline static +void serial_high(void) { + SERIAL_PIN_PORT |= SERIAL_PIN_MASK; +} + +void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size) +{ + Transaction_table = sstd_table; + Transaction_table_size = (uint8_t)sstd_table_size; + serial_output(); + serial_high(); +} + +void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size) +{ + Transaction_table = sstd_table; + Transaction_table_size = (uint8_t)sstd_table_size; + serial_input_with_pullup(); + + // Enable INT0-INT3,INT6 + EIMSK |= EIMSK_BIT; +#if SERIAL_PIN_MASK == _BV(PE6) + // Trigger on falling edge of INT6 + EICRB &= EICRx_BIT; +#else + // Trigger on falling edge of INT0-INT3 + EICRA &= EICRx_BIT; +#endif +} + +// Used by the sender to synchronize timing with the reciver. +static void sync_recv(void) NO_INLINE; +static +void sync_recv(void) { + for (uint8_t i = 0; i < SERIAL_DELAY*5 && serial_read_pin(); i++ ) { + } + // This shouldn't hang if the target disconnects because the + // serial line will float to high if the target does disconnect. + while (!serial_read_pin()); +} + +// Used by the reciver to send a synchronization signal to the sender. +static void sync_send(void) NO_INLINE; +static +void sync_send(void) { + serial_low(); + serial_delay(); + serial_high(); +} + +// Reads a byte from the serial line +static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) NO_INLINE; +static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) { + uint8_t byte, i, p, pb; + + _delay_sub_us(READ_WRITE_START_ADJUST); + for( i = 0, byte = 0, p = PARITY; i < bit; i++ ) { + serial_delay_half1(); // read the middle of pulses + if( serial_read_pin() ) { + byte = (byte << 1) | 1; p ^= 1; + } else { + byte = (byte << 1) | 0; p ^= 0; + } + _delay_sub_us(READ_WRITE_WIDTH_ADJUST); + serial_delay_half2(); + } + /* recive parity bit */ + serial_delay_half1(); // read the middle of pulses + pb = serial_read_pin(); + _delay_sub_us(READ_WRITE_WIDTH_ADJUST); + serial_delay_half2(); + + *pterrcount += (p != pb)? 1 : 0; + + return byte; +} + +// Sends a byte with MSB ordering +void serial_write_chunk(uint8_t data, uint8_t bit) NO_INLINE; +void serial_write_chunk(uint8_t data, uint8_t bit) { + uint8_t b, p; + for( p = PARITY, b = 1<<(bit-1); b ; b >>= 1) { + if(data & b) { + serial_high(); p ^= 1; + } else { + serial_low(); p ^= 0; + } + serial_delay(); + } + /* send parity bit */ + if(p & 1) { serial_high(); } + else { serial_low(); } + serial_delay(); + + serial_low(); // sync_send() / senc_recv() need raise edge +} + +static void serial_send_packet(uint8_t *buffer, uint8_t size) NO_INLINE; +static +void serial_send_packet(uint8_t *buffer, uint8_t size) { + for (uint8_t i = 0; i < size; ++i) { + uint8_t data; + data = buffer[i]; + sync_send(); + serial_write_chunk(data,8); + } +} + +static uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) NO_INLINE; +static +uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) { + uint8_t pecount = 0; + for (uint8_t i = 0; i < size; ++i) { + uint8_t data; + sync_recv(); + data = serial_read_chunk(&pecount, 8); + buffer[i] = data; + } + return pecount == 0; +} + +inline static +void change_sender2reciver(void) { + sync_send(); //0 + serial_delay_half1(); //1 + serial_low(); //2 + serial_input_with_pullup(); //2 + serial_delay_half1(); //3 +} + +inline static +void change_reciver2sender(void) { + sync_recv(); //0 + serial_delay(); //1 + serial_low(); //3 + serial_output(); //3 + serial_delay_half1(); //4 +} + +static inline uint8_t nibble_bits_count(uint8_t bits) +{ + bits = (bits & 0x5) + (bits >> 1 & 0x5); + bits = (bits & 0x3) + (bits >> 2 & 0x3); + return bits; +} + +// interrupt handle to be used by the target device +ISR(SERIAL_PIN_INTERRUPT) { + +#ifndef SERIAL_USE_MULTI_TRANSACTION + serial_low(); + serial_output(); + SSTD_t *trans = Transaction_table; +#else + // recive transaction table index + uint8_t tid, bits; + uint8_t pecount = 0; + sync_recv(); + bits = serial_read_chunk(&pecount,7); + tid = bits>>3; + bits = (bits&7) != nibble_bits_count(tid); + if( bits || pecount> 0 || tid > Transaction_table_size ) { + return; + } + serial_delay_half1(); + + serial_high(); // response step1 low->high + serial_output(); + _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT*SLAVE_INT_ACK_WIDTH); + SSTD_t *trans = &Transaction_table[tid]; + serial_low(); // response step2 ack high->low +#endif + + // target send phase + if( trans->target2initiator_buffer_size > 0 ) + serial_send_packet((uint8_t *)trans->target2initiator_buffer, + trans->target2initiator_buffer_size); + // target switch to input + change_sender2reciver(); + + // target recive phase + if( trans->initiator2target_buffer_size > 0 ) { + if (serial_recive_packet((uint8_t *)trans->initiator2target_buffer, + trans->initiator2target_buffer_size) ) { + *trans->status = TRANSACTION_ACCEPTED; + } else { + *trans->status = TRANSACTION_DATA_ERROR; + } + } else { + *trans->status = TRANSACTION_ACCEPTED; + } + + sync_recv(); //weit initiator output to high +} + +///////// +// start transaction by initiator +// +// int soft_serial_transaction(int sstd_index) +// +// Returns: +// TRANSACTION_END +// TRANSACTION_NO_RESPONSE +// TRANSACTION_DATA_ERROR +// this code is very time dependent, so we need to disable interrupts +#ifndef SERIAL_USE_MULTI_TRANSACTION +int soft_serial_transaction(void) { + SSTD_t *trans = Transaction_table; +#else +int soft_serial_transaction(int sstd_index) { + if( sstd_index > Transaction_table_size ) + return TRANSACTION_TYPE_ERROR; + SSTD_t *trans = &Transaction_table[sstd_index]; +#endif + cli(); + + // signal to the target that we want to start a transaction + serial_output(); + serial_low(); + _delay_us(SLAVE_INT_WIDTH_US); + +#ifndef SERIAL_USE_MULTI_TRANSACTION + // wait for the target response + serial_input_with_pullup(); + _delay_us(SLAVE_INT_RESPONSE_TIME); + + // check if the target is present + if (serial_read_pin()) { + // target failed to pull the line low, assume not present + serial_output(); + serial_high(); + *trans->status = TRANSACTION_NO_RESPONSE; + sei(); + return TRANSACTION_NO_RESPONSE; + } + +#else + // send transaction table index + int tid = (sstd_index<<3) | (7 & nibble_bits_count(sstd_index)); + sync_send(); + _delay_sub_us(TID_SEND_ADJUST); + serial_write_chunk(tid, 7); + serial_delay_half1(); + + // wait for the target response (step1 low->high) + serial_input_with_pullup(); + while( !serial_read_pin() ) { + _delay_sub_us(2); + } + + // check if the target is present (step2 high->low) + for( int i = 0; serial_read_pin(); i++ ) { + if (i > SLAVE_INT_ACK_WIDTH + 1) { + // slave failed to pull the line low, assume not present + serial_output(); + serial_high(); + *trans->status = TRANSACTION_NO_RESPONSE; + sei(); + return TRANSACTION_NO_RESPONSE; + } + _delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT); + } +#endif + + // initiator recive phase + // if the target is present syncronize with it + if( trans->target2initiator_buffer_size > 0 ) { + if (!serial_recive_packet((uint8_t *)trans->target2initiator_buffer, + trans->target2initiator_buffer_size) ) { + serial_output(); + serial_high(); + *trans->status = TRANSACTION_DATA_ERROR; + sei(); + return TRANSACTION_DATA_ERROR; + } + } + + // initiator switch to output + change_reciver2sender(); + + // initiator send phase + if( trans->initiator2target_buffer_size > 0 ) { + serial_send_packet((uint8_t *)trans->initiator2target_buffer, + trans->initiator2target_buffer_size); + } + + // always, release the line when not in use + sync_send(); + + *trans->status = TRANSACTION_END; + sei(); + return TRANSACTION_END; +} + +#ifdef SERIAL_USE_MULTI_TRANSACTION +int soft_serial_get_and_clean_status(int sstd_index) { + SSTD_t *trans = &Transaction_table[sstd_index]; + cli(); + int retval = *trans->status; + *trans->status = 0;; + sei(); + return retval; +} +#endif + +#endif + +// Helix serial.c history +// 2018-1-29 fork from let's split and add PD2, modify sync_recv() (#2308, bceffdefc) +// 2018-6-28 bug fix master to slave comm and speed up (#3255, 1038bbef4) +// (adjusted with avr-gcc 4.9.2) +// 2018-7-13 remove USE_SERIAL_PD2 macro (#3374, f30d6dd78) +// (adjusted with avr-gcc 4.9.2) +// 2018-8-11 add support multi-type transaction (#3608, feb5e4aae) +// (adjusted with avr-gcc 4.9.2) +// 2018-10-21 fix serial and RGB animation conflict (#4191, 4665e4fff) +// (adjusted with avr-gcc 7.3.0) +// 2018-10-28 re-adjust compiler depend value of delay (#4269, 8517f8a66) +// (adjusted with avr-gcc 5.4.0, 7.3.0) +// 2018-12-17 copy to TOP/quantum/split_common/ and remove backward compatibility code (#4669) diff --git a/keyboards/ai03/orbit/serial.h b/keyboards/ai03/orbit/serial.h new file mode 100644 index 000000000..1c1e64006 --- /dev/null +++ b/keyboards/ai03/orbit/serial.h @@ -0,0 +1,62 @@ +#pragma once + +#include + +// ///////////////////////////////////////////////////////////////// +// Need Soft Serial defines in config.h +// ///////////////////////////////////////////////////////////////// +// ex. +// #define SOFT_SERIAL_PIN ?? // ?? = D0,D1,D2,D3,E6 +// OPTIONAL: #define SELECT_SOFT_SERIAL_SPEED ? // ? = 1,2,3,4,5 +// // 1: about 137kbps (default) +// // 2: about 75kbps +// // 3: about 39kbps +// // 4: about 26kbps +// // 5: about 20kbps +// +// //// USE simple API (using signle-type transaction function) +// /* nothing */ +// //// USE flexible API (using multi-type transaction function) +// #define SERIAL_USE_MULTI_TRANSACTION +// +// ///////////////////////////////////////////////////////////////// + +// Soft Serial Transaction Descriptor +typedef struct _SSTD_t { + uint8_t *status; + uint8_t initiator2target_buffer_size; + uint8_t *initiator2target_buffer; + uint8_t target2initiator_buffer_size; + uint8_t *target2initiator_buffer; +} SSTD_t; +#define TID_LIMIT( table ) (sizeof(table) / sizeof(SSTD_t)) + +// initiator is transaction start side +void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size); +// target is interrupt accept side +void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size); + +// initiator resullt +#define TRANSACTION_END 0 +#define TRANSACTION_NO_RESPONSE 0x1 +#define TRANSACTION_DATA_ERROR 0x2 +#define TRANSACTION_TYPE_ERROR 0x4 +#ifndef SERIAL_USE_MULTI_TRANSACTION +int soft_serial_transaction(void); +#else +int soft_serial_transaction(int sstd_index); +#endif + +// target status +// *SSTD_t.status has +// initiator: +// TRANSACTION_END +// or TRANSACTION_NO_RESPONSE +// or TRANSACTION_DATA_ERROR +// target: +// TRANSACTION_DATA_ERROR +// or TRANSACTION_ACCEPTED +#define TRANSACTION_ACCEPTED 0x8 +#ifdef SERIAL_USE_MULTI_TRANSACTION +int soft_serial_get_and_clean_status(int sstd_index); +#endif diff --git a/keyboards/ai03/orbit/split_flags.c b/keyboards/ai03/orbit/split_flags.c new file mode 100644 index 000000000..1f5825d65 --- /dev/null +++ b/keyboards/ai03/orbit/split_flags.c @@ -0,0 +1,5 @@ +#include "split_flags.h" + +volatile bool RGB_DIRTY = false; + +volatile bool BACKLIT_DIRTY = false; \ No newline at end of file diff --git a/keyboards/ai03/orbit/split_flags.h b/keyboards/ai03/orbit/split_flags.h new file mode 100644 index 000000000..aaac474a7 --- /dev/null +++ b/keyboards/ai03/orbit/split_flags.h @@ -0,0 +1,15 @@ +#pragma once + +#include +#include + +/** +* Global Flags +**/ + +//RGB Stuff +extern volatile bool RGB_DIRTY; + + +//Backlight Stuff +extern volatile bool BACKLIT_DIRTY; diff --git a/keyboards/ai03/orbit/split_util.c b/keyboards/ai03/orbit/split_util.c new file mode 100644 index 000000000..5095cb8fd --- /dev/null +++ b/keyboards/ai03/orbit/split_util.c @@ -0,0 +1,87 @@ +#include "split_util.h" +#include "matrix.h" +#include "keyboard.h" +#include "config.h" +#include "timer.h" +#include "split_flags.h" +#include "transport.h" +#include "quantum.h" + +#ifdef EE_HANDS +# include "tmk_core/common/eeprom.h" +# include "eeconfig.h" +#endif + +volatile bool isLeftHand = true; + +__attribute__((weak)) +bool is_keyboard_left(void) { + #ifdef SPLIT_HAND_PIN + // Test pin SPLIT_HAND_PIN for High/Low, if low it's right hand + setPinInput(SPLIT_HAND_PIN); + return readPin(SPLIT_HAND_PIN); + #else + #ifdef EE_HANDS + return eeprom_read_byte(EECONFIG_HANDEDNESS); + #else + #ifdef MASTER_RIGHT + return !is_keyboard_master(); + #else + return is_keyboard_master(); + #endif + #endif + #endif +} + +bool is_keyboard_master(void) +{ +#ifdef __AVR__ + static enum { UNKNOWN, MASTER, SLAVE } usbstate = UNKNOWN; + + // only check once, as this is called often + if (usbstate == UNKNOWN) + { + USBCON |= (1 << OTGPADE); // enables VBUS pad + wait_us(5); + + usbstate = (USBSTA & (1 << VBUS)) ? MASTER : SLAVE; // checks state of VBUS + } + + return (usbstate == MASTER); +#else + return true; +#endif +} + +static void keyboard_master_setup(void) { +#if defined(USE_I2C) || defined(EH) + #ifdef SSD1306OLED + matrix_master_OLED_init (); + #endif +#endif + transport_master_init(); + + // For master the Backlight info needs to be sent on startup + // Otherwise the salve won't start with the proper info until an update + BACKLIT_DIRTY = true; +} + +static void keyboard_slave_setup(void) +{ + transport_slave_init(); +} + +// this code runs before the usb and keyboard is initialized +void matrix_setup(void) +{ + isLeftHand = is_keyboard_left(); + + if (is_keyboard_master()) + { + keyboard_master_setup(); + } + else + { + keyboard_slave_setup(); + } +} diff --git a/keyboards/ai03/orbit/split_util.h b/keyboards/ai03/orbit/split_util.h new file mode 100644 index 000000000..20f7535bf --- /dev/null +++ b/keyboards/ai03/orbit/split_util.h @@ -0,0 +1,10 @@ +#pragma once + +#include +#include +#include +#include + +extern volatile bool isLeftHand; + +void matrix_master_OLED_init (void); diff --git a/keyboards/ai03/orbit/transport.c b/keyboards/ai03/orbit/transport.c new file mode 100644 index 000000000..adedf2432 --- /dev/null +++ b/keyboards/ai03/orbit/transport.c @@ -0,0 +1,238 @@ + +#include "transport.h" + +#include "config.h" +#include "matrix.h" +#include "quantum.h" + +#include "orbit.h" + +#define ROWS_PER_HAND (MATRIX_ROWS/2) + +#ifdef RGBLIGHT_ENABLE +# include "rgblight.h" +#endif + +#ifdef BACKLIGHT_ENABLE +# include "backlight.h" + extern backlight_config_t backlight_config; +#endif + +#if defined(USE_I2C) || defined(EH) + +#include "i2c.h" + +#ifndef SLAVE_I2C_ADDRESS +# define SLAVE_I2C_ADDRESS 0x32 +#endif + +#if (MATRIX_COLS > 8) +# error "Currently only supports 8 COLS" +#endif + +// Get rows from other half over i2c +bool transport_master(matrix_row_t matrix[]) { + int err = 0; + + // write backlight info +#ifdef BACKLIGHT_ENABLE + if (BACKLIT_DIRTY) { + err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); + if (err) { goto i2c_error; } + + // Backlight location + err = i2c_master_write(I2C_BACKLIT_START); + if (err) { goto i2c_error; } + + // Write backlight + i2c_master_write(get_backlight_level()); + + BACKLIT_DIRTY = false; + } +#endif + + err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); + if (err) { goto i2c_error; } + + // start of matrix stored at I2C_KEYMAP_START + err = i2c_master_write(I2C_KEYMAP_START); + if (err) { goto i2c_error; } + + // Start read + err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); + if (err) { goto i2c_error; } + + if (!err) { + int i; + for (i = 0; i < ROWS_PER_HAND-1; ++i) { + matrix[i] = i2c_master_read(I2C_ACK); + } + matrix[i] = i2c_master_read(I2C_NACK); + i2c_master_stop(); + } else { +i2c_error: // the cable is disconnceted, or something else went wrong + i2c_reset_state(); + return false; + } + +#ifdef RGBLIGHT_ENABLE + if (RGB_DIRTY) { + err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); + if (err) { goto i2c_error; } + + // RGB Location + err = i2c_master_write(I2C_RGB_START); + if (err) { goto i2c_error; } + + uint32_t dword = eeconfig_read_rgblight(); + + // Write RGB + err = i2c_master_write_data(&dword, 4); + if (err) { goto i2c_error; } + + RGB_DIRTY = false; + i2c_master_stop(); + } +#endif + + return true; +} + +void transport_slave(matrix_row_t matrix[]) { + + for (int i = 0; i < ROWS_PER_HAND; ++i) + { + i2c_slave_buffer[I2C_KEYMAP_START + i] = matrix[i]; + } + // Read Backlight Info + #ifdef BACKLIGHT_ENABLE + if (BACKLIT_DIRTY) + { + backlight_set(i2c_slave_buffer[I2C_BACKLIT_START]); + BACKLIT_DIRTY = false; + } + #endif + #ifdef RGBLIGHT_ENABLE + if (RGB_DIRTY) + { + // Disable interupts (RGB data is big) + cli(); + // Create new DWORD for RGB data + uint32_t dword; + + // Fill the new DWORD with the data that was sent over + uint8_t * dword_dat = (uint8_t *)(&dword); + for (int i = 0; i < 4; i++) + { + dword_dat[i] = i2c_slave_buffer[I2C_RGB_START + i]; + } + + // Update the RGB now with the new data and set RGB_DIRTY to false + rgblight_update_dword(dword); + RGB_DIRTY = false; + // Re-enable interupts now that RGB is set + sei(); + } + #endif +} + +void transport_master_init(void) { + i2c_master_init(); +} + +void transport_slave_init(void) { + i2c_slave_init(SLAVE_I2C_ADDRESS); +} + +#else // USE_SERIAL + +#include "serial.h" + + + +volatile Serial_s2m_buffer_t serial_s2m_buffer = {}; +volatile Serial_m2s_buffer_t serial_m2s_buffer = {}; +uint8_t volatile status0 = 0; + +SSTD_t transactions[] = { + { (uint8_t *)&status0, + sizeof(serial_m2s_buffer), (uint8_t *)&serial_m2s_buffer, + sizeof(serial_s2m_buffer), (uint8_t *)&serial_s2m_buffer + } +}; + +uint8_t slave_layer_cache; +uint8_t slave_nlock_cache; +uint8_t slave_clock_cache; +uint8_t slave_slock_cache; + +void transport_master_init(void) +{ soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); } + +void transport_slave_init(void) +{ + soft_serial_target_init(transactions, TID_LIMIT(transactions)); + slave_layer_cache = 255; + slave_nlock_cache = 255; + slave_clock_cache = 255; + slave_slock_cache = 255; +} + +bool transport_master(matrix_row_t matrix[]) { + + if (soft_serial_transaction()) { + return false; + } + + // TODO: if MATRIX_COLS > 8 change to unpack() + for (int i = 0; i < ROWS_PER_HAND; ++i) { + matrix[i] = serial_s2m_buffer.smatrix[i]; + } + + #if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT) + // Code to send RGB over serial goes here (not implemented yet) + #endif + + #ifdef BACKLIGHT_ENABLE + // Write backlight level for slave to read + serial_m2s_buffer.backlight_level = backlight_config.enable ? backlight_config.level : 0; + #endif + + return true; +} + +void transport_slave(matrix_row_t matrix[]) { + + // TODO: if MATRIX_COLS > 8 change to pack() + for (int i = 0; i < ROWS_PER_HAND; ++i) + { + serial_s2m_buffer.smatrix[i] = matrix[i]; + } + #ifdef BACKLIGHT_ENABLE + backlight_set(serial_m2s_buffer.backlight_level); + #endif + #if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT) + // Add serial implementation for RGB here + #endif + + if (slave_layer_cache != serial_m2s_buffer.current_layer) { + slave_layer_cache = serial_m2s_buffer.current_layer; + set_layer_indicators(slave_layer_cache); + } + + if (slave_nlock_cache != serial_m2s_buffer.nlock_led) { + slave_nlock_cache = serial_m2s_buffer.nlock_led; + led_toggle(3, slave_nlock_cache); + } + if (slave_clock_cache != serial_m2s_buffer.clock_led) { + slave_clock_cache = serial_m2s_buffer.clock_led; + led_toggle(4, slave_clock_cache); + } + if (slave_slock_cache != serial_m2s_buffer.slock_led) { + slave_slock_cache = serial_m2s_buffer.slock_led; + led_toggle(5, slave_slock_cache); + } + +} + +#endif diff --git a/keyboards/ai03/orbit/transport.h b/keyboards/ai03/orbit/transport.h new file mode 100644 index 000000000..422e2ecb9 --- /dev/null +++ b/keyboards/ai03/orbit/transport.h @@ -0,0 +1,42 @@ +#pragma once + +#include + +#define ROWS_PER_HAND (MATRIX_ROWS/2) + +typedef struct _Serial_s2m_buffer_t { + // TODO: if MATRIX_COLS > 8 change to uint8_t packed_matrix[] for pack/unpack + matrix_row_t smatrix[ROWS_PER_HAND]; +} Serial_s2m_buffer_t; + +typedef struct _Serial_m2s_buffer_t { +#ifdef BACKLIGHT_ENABLE + uint8_t backlight_level; +#endif +#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT) + rgblight_config_t rgblight_config; //not yet use + // + // When MCUs on both sides drive their respective RGB LED chains, + // it is necessary to synchronize, so it is necessary to communicate RGB information. + // In that case, define the RGBLIGHT_SPLIT macro. + // + // Otherwise, if the master side MCU drives both sides RGB LED chains, + // there is no need to communicate. +#endif + + uint8_t current_layer; + uint8_t nlock_led; + uint8_t clock_led; + uint8_t slock_led; + +} Serial_m2s_buffer_t; + +extern volatile Serial_s2m_buffer_t serial_s2m_buffer; +extern volatile Serial_m2s_buffer_t serial_m2s_buffer; + +void transport_master_init(void); +void transport_slave_init(void); + +// returns false if valid data not received from slave +bool transport_master(matrix_row_t matrix[]); +void transport_slave(matrix_row_t matrix[]);