diff --git a/.gitmodules b/.gitmodules index 1576b8dc0..7e3c92d03 100644 --- a/.gitmodules +++ b/.gitmodules @@ -4,3 +4,6 @@ [submodule "lib/chibios-contrib"] path = lib/chibios-contrib url = https://github.com/ChibiOS/ChibiOS-Contrib.git +[submodule "lib/ugfx"] + path = lib/ugfx + url = https://bitbucket.org/Tectu/ugfx diff --git a/Makefile b/Makefile index c285dabad..a7a10bf32 100644 --- a/Makefile +++ b/Makefile @@ -59,6 +59,12 @@ ifndef KEYBOARD KEYBOARD=planck endif +MASTER ?= left +ifdef master + MASTER = $(master) +endif + + # converts things to keyboards/subproject ifneq (,$(findstring /,$(KEYBOARD))) TEMP:=$(KEYBOARD) @@ -198,10 +204,20 @@ ifeq ($(strip $(RGBLIGHT_ENABLE)), yes) endif ifeq ($(strip $(TAP_DANCE_ENABLE)), yes) - OPT_DEFS += -DTAP_DANCE_ENABLE + OPT_DEFS += -DTAP_DANCE_ENABLE SRC += $(QUANTUM_DIR)/process_keycode/process_tap_dance.c endif +ifeq ($(strip $(SERIAL_LINK_ENABLE)), yes) + SERIAL_DIR = $(QUANTUM_DIR)/serial_link + SERIAL_PATH = $(QUANTUM_PATH)/serial_link + SERIAL_SRC = $(wildcard $(SERIAL_PATH)/protocol/*.c) + SERIAL_SRC += $(wildcard $(SERIAL_PATH)/system/*.c) + SRC += $(patsubst $(QUANTUM_PATH)/%,%,$(SERIAL_SRC)) + OPT_DEFS += -DSERIAL_LINK_ENABLE + VAPTH += $(SERIAL_PATH) +endif + # Optimize size but this may cause error "relocation truncated to fit" #EXTRALDFLAGS = -Wl,--relax @@ -233,10 +249,17 @@ ifeq ($(PLATFORM),AVR) else ifeq ($(PLATFORM),CHIBIOS) include $(TMK_PATH)/protocol/chibios.mk include $(TMK_PATH)/chibios.mk + OPT_OS = chibios else $(error Unknown platform) endif +ifeq ($(strip $(VISUALIZER_ENABLE)), yes) + VISUALIZER_DIR = $(QUANTUM_DIR)/visualizer + VISUALIZER_PATH = $(QUANTUM_PATH)/visualizer + include $(VISUALIZER_PATH)/visualizer.mk +endif + include $(TMK_PATH)/rules.mk GIT_VERSION := $(shell git describe --abbrev=6 --dirty --always --tags 2>/dev/null || date +"%Y-%m-%d-%H:%M:%S") diff --git a/keyboards/atreus/Makefile b/keyboards/atreus/Makefile index 72b694faa..95ee1d4d7 100644 --- a/keyboards/atreus/Makefile +++ b/keyboards/atreus/Makefile @@ -5,6 +5,7 @@ ifdef TEENSY2 ATRUES_UPLOAD_COMMAND = teensy_loader_cli -w -mmcu=$(MCU) $(TARGET).hex else OPT_DEFS += -DATREUS_ASTAR + OPT_DEFS += -DCATERINA_BOOTLOADER ATRUES_UPLOAD_COMMAND = while [ ! -r $(USB) ]; do sleep 1; done; \ avrdude -p $(MCU) -c avr109 -U flash:w:$(TARGET).hex -P $(USB) endif diff --git a/keyboards/chibios_test/Makefile b/keyboards/chibios_test/Makefile new file mode 100644 index 000000000..d9f2b8b83 --- /dev/null +++ b/keyboards/chibios_test/Makefile @@ -0,0 +1,14 @@ +SUBPROJECT_DEFAULT = stm32_f072_onekey + +#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration +MOUSEKEY_ENABLE ?= yes # Mouse keys +EXTRAKEY_ENABLE ?= yes # Audio control and System control +CONSOLE_ENABLE ?= yes # Console for debug +COMMAND_ENABLE ?= yes # Commands for debug and configuration +SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= yes # USB Nkey Rollover +CUSTOM_MATRIX ?= yes # Custom matrix file + +ifndef QUANTUM_DIR + include ../../Makefile +endif \ No newline at end of file diff --git a/keyboards/stm32_f103_onekey/boards/GENERIC_STM32_F103/board.c b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.c similarity index 100% rename from keyboards/stm32_f103_onekey/boards/GENERIC_STM32_F103/board.c rename to keyboards/chibios_test/boards/GENERIC_STM32_F103/board.c diff --git a/keyboards/stm32_f103_onekey/boards/GENERIC_STM32_F103/board.h b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.h similarity index 100% rename from keyboards/stm32_f103_onekey/boards/GENERIC_STM32_F103/board.h rename to keyboards/chibios_test/boards/GENERIC_STM32_F103/board.h diff --git a/keyboards/stm32_f103_onekey/boards/GENERIC_STM32_F103/board.mk b/keyboards/chibios_test/boards/GENERIC_STM32_F103/board.mk similarity index 100% rename from keyboards/stm32_f103_onekey/boards/GENERIC_STM32_F103/board.mk rename to keyboards/chibios_test/boards/GENERIC_STM32_F103/board.mk diff --git a/keyboards/stm32_f103_onekey/boards/GENERIC_STM32_F103/mini_stm32_mapping.png b/keyboards/chibios_test/boards/GENERIC_STM32_F103/mini_stm32_mapping.png similarity index 100% rename from keyboards/stm32_f103_onekey/boards/GENERIC_STM32_F103/mini_stm32_mapping.png rename to keyboards/chibios_test/boards/GENERIC_STM32_F103/mini_stm32_mapping.png diff --git a/keyboards/stm32_f103_onekey/boards/maple_mini_mapping.png b/keyboards/chibios_test/boards/maple_mini_mapping.png similarity index 100% rename from keyboards/stm32_f103_onekey/boards/maple_mini_mapping.png rename to keyboards/chibios_test/boards/maple_mini_mapping.png diff --git a/keyboards/chibios_test/chibios_test.c b/keyboards/chibios_test/chibios_test.c new file mode 100644 index 000000000..efe2d4a5d --- /dev/null +++ b/keyboards/chibios_test/chibios_test.c @@ -0,0 +1 @@ +#include "chibios_test.h" diff --git a/keyboards/chibios_test/chibios_test.h b/keyboards/chibios_test/chibios_test.h new file mode 100644 index 000000000..25b031771 --- /dev/null +++ b/keyboards/chibios_test/chibios_test.h @@ -0,0 +1,6 @@ +#ifndef KEYBOARDS_CHIBIOS_TEST_CHIBIOS_TEST_H_ +#define KEYBOARDS_CHIBIOS_TEST_CHIBIOS_TEST_H_ + +#include "quantum.h" + +#endif /* KEYBOARDS_CHIBIOS_TEST_CHIBIOS_TEST_H_ */ diff --git a/keyboards/teensy_lc_onekey/config.h b/keyboards/chibios_test/config.h similarity index 91% rename from keyboards/teensy_lc_onekey/config.h rename to keyboards/chibios_test/config.h index 19b14fe61..c32a77b37 100644 --- a/keyboards/teensy_lc_onekey/config.h +++ b/keyboards/chibios_test/config.h @@ -18,18 +18,17 @@ along with this program. If not, see . #ifndef CONFIG_H #define CONFIG_H - /* USB Device descriptor parameter */ #define VENDOR_ID 0xFEED #define PRODUCT_ID 0x6464 #define DEVICE_VER 0x0001 /* in python2: list(u"whatever".encode('utf-16-le')) */ /* at most 32 characters or the ugly hack in usb_main.c borks */ -#define MANUFACTURER "TMK" +#define MANUFACTURER "QMK" #define USBSTR_MANUFACTURER 'T', '\x00', 'M', '\x00', 'K', '\x00', ' ', '\x00', '\xc6', '\x00' -#define PRODUCT "ChibiOS TMK test" -#define USBSTR_PRODUCT 'C', '\x00', 'h', '\x00', 'i', '\x00', 'b', '\x00', 'i', '\x00', 'O', '\x00', 'S', '\x00', ' ', '\x00', 'T', '\x00', 'M', '\x00', 'K', '\x00', ' ', '\x00', 't', '\x00', 'e', '\x00', 's', '\x00', 't', '\x00' -#define DESCRIPTION "TMK keyboard firmware over ChibiOS" +#define PRODUCT "ChibiOS QMK test" +#define USBSTR_PRODUCT 'C', '\x00', 'h', '\x00', 'i', '\x00', 'b', '\x00', 'i', '\x00', 'O', '\x00', 'S', '\x00', ' ', '\x00', 'Q', '\x00', 'M', '\x00', 'K', '\x00', ' ', '\x00', 't', '\x00', 'e', '\x00', 's', '\x00', 't', '\x00' +#define DESCRIPTION "QMK keyboard firmware test for ChibiOS" /* key matrix size */ #define MATRIX_ROWS 1 diff --git a/keyboards/stm32_f072_onekey/keymaps/default/keymap.c b/keyboards/chibios_test/keymaps/default/keymap.c similarity index 96% rename from keyboards/stm32_f072_onekey/keymaps/default/keymap.c rename to keyboards/chibios_test/keymaps/default/keymap.c index 6c48149f8..239d70007 100644 --- a/keyboards/stm32_f072_onekey/keymaps/default/keymap.c +++ b/keyboards/chibios_test/keymaps/default/keymap.c @@ -15,7 +15,7 @@ You should have received a copy of the GNU General Public License along with this program. If not, see . */ -#include "stm32_f072_onekey.h" +#include "chibios_test.h" const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { {{KC_CAPS}}, // test with KC_CAPS, KC_A, KC_BTLD diff --git a/keyboards/teensy_lc_onekey/ld/MKL26Z64.ld b/keyboards/chibios_test/ld/MKL26Z64.ld similarity index 100% rename from keyboards/teensy_lc_onekey/ld/MKL26Z64.ld rename to keyboards/chibios_test/ld/MKL26Z64.ld diff --git a/keyboards/stm32_f103_onekey/ld/STM32F103x8_stm32duino_bootloader.ld b/keyboards/chibios_test/ld/STM32F103x8_stm32duino_bootloader.ld similarity index 100% rename from keyboards/stm32_f103_onekey/ld/STM32F103x8_stm32duino_bootloader.ld rename to keyboards/chibios_test/ld/STM32F103x8_stm32duino_bootloader.ld diff --git a/keyboards/stm32_f072_onekey/Makefile b/keyboards/chibios_test/stm32_f072_onekey/Makefile similarity index 77% rename from keyboards/stm32_f072_onekey/Makefile rename to keyboards/chibios_test/stm32_f072_onekey/Makefile index 24abcb0e0..eae38c4b2 100644 --- a/keyboards/stm32_f072_onekey/Makefile +++ b/keyboards/chibios_test/stm32_f072_onekey/Makefile @@ -36,15 +36,6 @@ ARMV = 6 # Build Options # comment out to disable the options. # -#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration -MOUSEKEY_ENABLE ?= yes # Mouse keys -EXTRAKEY_ENABLE ?= yes # Audio control and System control -CONSOLE_ENABLE ?= yes # Console for debug -COMMAND_ENABLE ?= yes # Commands for debug and configuration -SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend -NKRO_ENABLE ?= yes # USB Nkey Rollover -CUSTOM_MATRIX ?= yes # Custom matrix file - ifndef QUANTUM_DIR - include ../../Makefile + include ../../../Makefile endif diff --git a/keyboards/stm32_f072_onekey/bootloader_defs.h b/keyboards/chibios_test/stm32_f072_onekey/bootloader_defs.h similarity index 100% rename from keyboards/stm32_f072_onekey/bootloader_defs.h rename to keyboards/chibios_test/stm32_f072_onekey/bootloader_defs.h diff --git a/keyboards/stm32_f072_onekey/chconf.h b/keyboards/chibios_test/stm32_f072_onekey/chconf.h similarity index 100% rename from keyboards/stm32_f072_onekey/chconf.h rename to keyboards/chibios_test/stm32_f072_onekey/chconf.h diff --git a/keyboards/chibios_test/stm32_f072_onekey/config.h b/keyboards/chibios_test/stm32_f072_onekey/config.h new file mode 100644 index 000000000..bbaf0dc4b --- /dev/null +++ b/keyboards/chibios_test/stm32_f072_onekey/config.h @@ -0,0 +1,7 @@ +#ifndef KEYBOARDS_CHIBIOS_TEST_STM32_F072_ONEKEY_CONFIG_H_ +#define KEYBOARDS_CHIBIOS_TEST_STM32_F072_ONEKEY_CONFIG_H_ + +#include "../config.h" + + +#endif /* KEYBOARDS_CHIBIOS_TEST_STM32_F072_ONEKEY_CONFIG_H_ */ diff --git a/keyboards/stm32_f072_onekey/halconf.h b/keyboards/chibios_test/stm32_f072_onekey/halconf.h similarity index 100% rename from keyboards/stm32_f072_onekey/halconf.h rename to keyboards/chibios_test/stm32_f072_onekey/halconf.h diff --git a/keyboards/stm32_f072_onekey/led.c b/keyboards/chibios_test/stm32_f072_onekey/led.c similarity index 100% rename from keyboards/stm32_f072_onekey/led.c rename to keyboards/chibios_test/stm32_f072_onekey/led.c diff --git a/keyboards/stm32_f072_onekey/matrix.c b/keyboards/chibios_test/stm32_f072_onekey/matrix.c similarity index 100% rename from keyboards/stm32_f072_onekey/matrix.c rename to keyboards/chibios_test/stm32_f072_onekey/matrix.c diff --git a/keyboards/stm32_f072_onekey/mcuconf.h b/keyboards/chibios_test/stm32_f072_onekey/mcuconf.h similarity index 100% rename from keyboards/stm32_f072_onekey/mcuconf.h rename to keyboards/chibios_test/stm32_f072_onekey/mcuconf.h diff --git a/keyboards/stm32_f072_onekey/stm32_f072_onekey.c b/keyboards/chibios_test/stm32_f072_onekey/stm32_f072_onekey.c similarity index 100% rename from keyboards/stm32_f072_onekey/stm32_f072_onekey.c rename to keyboards/chibios_test/stm32_f072_onekey/stm32_f072_onekey.c diff --git a/keyboards/stm32_f072_onekey/stm32_f072_onekey.h b/keyboards/chibios_test/stm32_f072_onekey/stm32_f072_onekey.h similarity index 71% rename from keyboards/stm32_f072_onekey/stm32_f072_onekey.h rename to keyboards/chibios_test/stm32_f072_onekey/stm32_f072_onekey.h index 1f798c825..0455ad342 100644 --- a/keyboards/stm32_f072_onekey/stm32_f072_onekey.h +++ b/keyboards/chibios_test/stm32_f072_onekey/stm32_f072_onekey.h @@ -1,5 +1,5 @@ #ifndef STM32_F072_ONEKEY_H #define STM32_F072_ONEKEY_H -#include "quantum.h" +#include "chibios_test.h" #endif diff --git a/keyboards/stm32_f103_onekey/Makefile b/keyboards/chibios_test/stm32_f103_onekey/Makefile similarity index 76% rename from keyboards/stm32_f103_onekey/Makefile rename to keyboards/chibios_test/stm32_f103_onekey/Makefile index 5c1793c86..307ca5b19 100644 --- a/keyboards/stm32_f103_onekey/Makefile +++ b/keyboards/chibios_test/stm32_f103_onekey/Makefile @@ -46,19 +46,7 @@ ARMV = 7 # /tmk_core/tool/chibios/ch-bootloader-jump.patch #STM32_BOOTLOADER_ADDRESS = 0x1FFFC800 -# Build Options -# comment out to disable the options. -# -#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration -## BOOTMAGIC is not supported on STM32 chips yet. -MOUSEKEY_ENABLE ?= yes # Mouse keys -EXTRAKEY_ENABLE ?= yes # Audio control and System control -# CONSOLE_ENABLE ?= yes # Console for debug -COMMAND_ENABLE ?= yes # Commands for debug and configuration -SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend -NKRO_ENABLE ?= yes # USB Nkey Rollover -CUSTOM_MATRIX ?= yes # Custom matrix file ifndef QUANTUM_DIR - include ../../Makefile + include ../../../Makefile endif diff --git a/keyboards/stm32_f103_onekey/bootloader_defs.h b/keyboards/chibios_test/stm32_f103_onekey/bootloader_defs.h similarity index 100% rename from keyboards/stm32_f103_onekey/bootloader_defs.h rename to keyboards/chibios_test/stm32_f103_onekey/bootloader_defs.h diff --git a/keyboards/stm32_f103_onekey/chconf.h b/keyboards/chibios_test/stm32_f103_onekey/chconf.h similarity index 100% rename from keyboards/stm32_f103_onekey/chconf.h rename to keyboards/chibios_test/stm32_f103_onekey/chconf.h diff --git a/keyboards/chibios_test/stm32_f103_onekey/config.h b/keyboards/chibios_test/stm32_f103_onekey/config.h new file mode 100644 index 000000000..de0b906f3 --- /dev/null +++ b/keyboards/chibios_test/stm32_f103_onekey/config.h @@ -0,0 +1,6 @@ +#ifndef KEYBOARDS_CHIBIOS_TEST_STM32_F103_ONEKEY_CONFIG_H_ +#define KEYBOARDS_CHIBIOS_TEST_STM32_F103_ONEKEY_CONFIG_H_ + +#include "../config.h" + +#endif /* KEYBOARDS_CHIBIOS_TEST_STM32_F103_ONEKEY_CONFIG_H_ */ diff --git a/keyboards/stm32_f103_onekey/flash.sh b/keyboards/chibios_test/stm32_f103_onekey/flash.sh similarity index 100% rename from keyboards/stm32_f103_onekey/flash.sh rename to keyboards/chibios_test/stm32_f103_onekey/flash.sh diff --git a/keyboards/stm32_f103_onekey/halconf.h b/keyboards/chibios_test/stm32_f103_onekey/halconf.h similarity index 100% rename from keyboards/stm32_f103_onekey/halconf.h rename to keyboards/chibios_test/stm32_f103_onekey/halconf.h diff --git a/keyboards/stm32_f103_onekey/led.c b/keyboards/chibios_test/stm32_f103_onekey/led.c similarity index 100% rename from keyboards/stm32_f103_onekey/led.c rename to keyboards/chibios_test/stm32_f103_onekey/led.c diff --git a/keyboards/stm32_f103_onekey/matrix.c b/keyboards/chibios_test/stm32_f103_onekey/matrix.c similarity index 100% rename from keyboards/stm32_f103_onekey/matrix.c rename to keyboards/chibios_test/stm32_f103_onekey/matrix.c diff --git a/keyboards/stm32_f103_onekey/mcuconf.h b/keyboards/chibios_test/stm32_f103_onekey/mcuconf.h similarity index 100% rename from keyboards/stm32_f103_onekey/mcuconf.h rename to keyboards/chibios_test/stm32_f103_onekey/mcuconf.h diff --git a/keyboards/stm32_f103_onekey/stm32_f103_onekey.c b/keyboards/chibios_test/stm32_f103_onekey/stm32_f103_onekey.c similarity index 100% rename from keyboards/stm32_f103_onekey/stm32_f103_onekey.c rename to keyboards/chibios_test/stm32_f103_onekey/stm32_f103_onekey.c diff --git a/keyboards/stm32_f103_onekey/stm32_f103_onekey.h b/keyboards/chibios_test/stm32_f103_onekey/stm32_f103_onekey.h similarity index 70% rename from keyboards/stm32_f103_onekey/stm32_f103_onekey.h rename to keyboards/chibios_test/stm32_f103_onekey/stm32_f103_onekey.h index e4d0dd9c4..89a62b2bb 100644 --- a/keyboards/stm32_f103_onekey/stm32_f103_onekey.h +++ b/keyboards/chibios_test/stm32_f103_onekey/stm32_f103_onekey.h @@ -1,4 +1,4 @@ #ifndef STM32_F103_ONEKEY_H #define STM32_F103_ONEKEY_H -#include "quantum.h" +#include "chibios_test.h" #endif diff --git a/keyboards/teensy_lc_onekey/Makefile b/keyboards/chibios_test/teensy_lc_onekey/Makefile similarity index 69% rename from keyboards/teensy_lc_onekey/Makefile rename to keyboards/chibios_test/teensy_lc_onekey/Makefile index 064e61815..43ea9d82d 100644 --- a/keyboards/teensy_lc_onekey/Makefile +++ b/keyboards/chibios_test/teensy_lc_onekey/Makefile @@ -44,19 +44,6 @@ MCU = cortex-m0plus # I.e. 6 for Teensy LC; 7 for Teensy 3.x ARMV = 6 -# Build Options -# comment out to disable the options. -# -BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration -## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.) -MOUSEKEY_ENABLE ?= yes # Mouse keys -EXTRAKEY_ENABLE ?= yes # Audio control and System control -CONSOLE_ENABLE ?= yes # Console for debug -COMMAND_ENABLE ?= yes # Commands for debug and configuration -SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend -NKRO_ENABLE ?= yes # USB Nkey Rollover -CUSTOM_MATRIX ?= yes # Custom matrix file - ifndef QUANTUM_DIR - include ../../Makefile -endif + include ../../../Makefile +endif \ No newline at end of file diff --git a/keyboards/teensy_lc_onekey/Makefile.3.0 b/keyboards/chibios_test/teensy_lc_onekey/Makefile.3.0 similarity index 100% rename from keyboards/teensy_lc_onekey/Makefile.3.0 rename to keyboards/chibios_test/teensy_lc_onekey/Makefile.3.0 diff --git a/keyboards/teensy_lc_onekey/Makefile.3.2 b/keyboards/chibios_test/teensy_lc_onekey/Makefile.3.2 similarity index 100% rename from keyboards/teensy_lc_onekey/Makefile.3.2 rename to keyboards/chibios_test/teensy_lc_onekey/Makefile.3.2 diff --git a/keyboards/teensy_lc_onekey/chconf.h b/keyboards/chibios_test/teensy_lc_onekey/chconf.h similarity index 100% rename from keyboards/teensy_lc_onekey/chconf.h rename to keyboards/chibios_test/teensy_lc_onekey/chconf.h diff --git a/keyboards/chibios_test/teensy_lc_onekey/config.h b/keyboards/chibios_test/teensy_lc_onekey/config.h new file mode 100644 index 000000000..d9eb05d2a --- /dev/null +++ b/keyboards/chibios_test/teensy_lc_onekey/config.h @@ -0,0 +1,6 @@ +#ifndef KEYBOARDS_CHIBIOS_TEST_TEENSY_LC_ONEKEY_CONFIG_H_ +#define KEYBOARDS_CHIBIOS_TEST_TEENSY_LC_ONEKEY_CONFIG_H_ + +#include "../config.h" + +#endif /* KEYBOARDS_CHIBIOS_TEST_TEENSY_LC_ONEKEY_CONFIG_H_ */ diff --git a/keyboards/teensy_lc_onekey/halconf.h b/keyboards/chibios_test/teensy_lc_onekey/halconf.h similarity index 100% rename from keyboards/teensy_lc_onekey/halconf.h rename to keyboards/chibios_test/teensy_lc_onekey/halconf.h diff --git a/keyboards/teensy_lc_onekey/instructions.md b/keyboards/chibios_test/teensy_lc_onekey/instructions.md similarity index 100% rename from keyboards/teensy_lc_onekey/instructions.md rename to keyboards/chibios_test/teensy_lc_onekey/instructions.md diff --git a/keyboards/teensy_lc_onekey/led.c b/keyboards/chibios_test/teensy_lc_onekey/led.c similarity index 100% rename from keyboards/teensy_lc_onekey/led.c rename to keyboards/chibios_test/teensy_lc_onekey/led.c diff --git a/keyboards/teensy_lc_onekey/matrix.c b/keyboards/chibios_test/teensy_lc_onekey/matrix.c similarity index 100% rename from keyboards/teensy_lc_onekey/matrix.c rename to keyboards/chibios_test/teensy_lc_onekey/matrix.c diff --git a/keyboards/teensy_lc_onekey/mcuconf.h b/keyboards/chibios_test/teensy_lc_onekey/mcuconf.h similarity index 100% rename from keyboards/teensy_lc_onekey/mcuconf.h rename to keyboards/chibios_test/teensy_lc_onekey/mcuconf.h diff --git a/keyboards/teensy_lc_onekey/teensy_lc_onekey.c b/keyboards/chibios_test/teensy_lc_onekey/teensy_lc_onekey.c similarity index 100% rename from keyboards/teensy_lc_onekey/teensy_lc_onekey.c rename to keyboards/chibios_test/teensy_lc_onekey/teensy_lc_onekey.c diff --git a/keyboards/teensy_lc_onekey/teensy_lc_onekey.h b/keyboards/chibios_test/teensy_lc_onekey/teensy_lc_onekey.h similarity index 70% rename from keyboards/teensy_lc_onekey/teensy_lc_onekey.h rename to keyboards/chibios_test/teensy_lc_onekey/teensy_lc_onekey.h index f598bcf66..ea1c84e2f 100644 --- a/keyboards/teensy_lc_onekey/teensy_lc_onekey.h +++ b/keyboards/chibios_test/teensy_lc_onekey/teensy_lc_onekey.h @@ -1,4 +1,4 @@ #ifndef TEENSY_LC_ONEKEY_H #define TEENSY_LC_ONEKEY_H -#include "quantum.h" +#include "chibios_test.h" #endif diff --git a/keyboards/ergodox_ez/matrix.c b/keyboards/ergodox_ez/matrix.c index 9c1efa1d0..dc29cf5cd 100644 --- a/keyboards/ergodox_ez/matrix.c +++ b/keyboards/ergodox_ez/matrix.c @@ -39,6 +39,17 @@ along with this program. If not, see . #include "timer.h" #endif +/* + * This constant define not debouncing time in msecs, but amount of matrix + * scan loops which should be made to get stable debounced results. + * + * On Ergodox matrix scan rate is relatively low, because of slow I2C. + * Now it's only 317 scans/second, or about 3.15 msec/scan. + * According to Cherry specs, debouncing time is 5 msec. + * + * And so, there is no sense to have DEBOUNCE higher than 2. + */ + #ifndef DEBOUNCE # define DEBOUNCE 5 #endif @@ -181,6 +192,7 @@ uint8_t matrix_scan(void) if (debouncing) { if (--debouncing) { wait_us(1); + // this should be wait_ms(1) but has been left as-is at EZ's request } else { for (uint8_t i = 0; i < MATRIX_ROWS; i++) { matrix[i] = matrix_debouncing[i]; diff --git a/keyboards/infinity_ergodox/MEMO.txt b/keyboards/infinity_ergodox/MEMO.txt new file mode 100644 index 000000000..e2886aa00 --- /dev/null +++ b/keyboards/infinity_ergodox/MEMO.txt @@ -0,0 +1,385 @@ +flabbergast's TMK/ChibiOS port +============================== +2015/10/16 + + +Build +----- +$ git clone -b chibios https://github.com/flabbergast/tmk_keyboard.git + +$ cd tmk_keyboard +$ git submodule add -f -b kinetis https://github.com/flabbergast/ChibiOS.git tmk_core/tool/chibios/chibios +or +$ cd tmk_keyboard/tmk_core/tool/chibios +$ git clone -b kinetis https://github.com/flabbergast/ChibiOS.git tmk_core/tool/chibios/chibios + +$ cd tmk_keyboard/keyboard/infinity_chibios +$ make + + + + +Chibios Configuration +--------------------- +halconf.h: for HAL configuration + placed in project directory + read in chibios/os/hal/hal.mk + included in chibios/os/hal/include/hal.h +mcuconf.h: for MCU configuration + placed in project directory + included in halconf.h + + +Chibios Term +------------ +PAL = Port Abstraction Layer + palWritePad + palReadPad + palSetPad + chibios/os/hal/include/pal.h + +LLD = Low Level Driver + + +Makefile +-------- + # /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) + MCU_FAMILY = KINETIS + MCU_SERIES = KL2x + + # - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ + # or /ld/ + MCU_LDSCRIPT = MKL26Z64 + + # - it should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ + MCU_STARTUP = kl2x + + # Board: it should exist either in /os/hal/boards/ + # or /boards + BOARD = PJRC_TEENSY_LC + + MCU = cortex-m0 + + # ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 + ARMV = 6 + + +halconf.h +--------- + + +mcuconf.h +--------- + + +chconf.h +-------- + + +ld script +--------- +--- ../../tmk_core/tool/chibios/chibios/os/common/ports/ARMCMx/compilers/GCC/ld/MKL26Z64.ld 2015-10-15 09:08:58.732904304 +0900 ++++ ld/MKL26Z64.ld 2015-10-15 08:48:06.430215496 +0900 +@@ -27,7 +27,8 @@ + { + flash0 : org = 0x00000000, len = 0xc0 + flashcfg : org = 0x00000400, len = 0x10 +- flash : org = 0x00000410, len = 64k - 0x410 ++ flash : org = 0x00000410, len = 62k - 0x410 ++ eeprom_emu : org = 0x0000F800, len = 2k + ram : org = 0x1FFFF800, len = 8k + } + +@@ -35,6 +36,10 @@ + __ram_size__ = LENGTH(ram); + __ram_end__ = __ram_start__ + __ram_size__; + ++__eeprom_workarea_start__ = ORIGIN(eeprom_emu); ++__eeprom_workarea_size__ = LENGTH(eeprom_emu); ++__eeprom_workarea_end__ = __eeprom_workarea_start__ + __eeprom_workarea_size__; ++ + SECTIONS + { + . = 0; + + + +Configuration/Startup for Infinity 60% +-------------------------------------- +Configuration: + + +Clock: +Inifinity + FEI(FLL Engaged Internal) mode with core clock:48MHz, bus clock:48MHz, flash clock:24MHz + Clock dividor: + SIM_CLKDIV1[OUTDIV1] = 0 divide-by-1 for core clock + SIM_CLKDIV1[OUTDIV2] = 0 divide-by-1 for bus clock + SIM_CLKDIV1[OUTDIV4] = 1 divide-by-2 for flash clock + Internal reference clock: + MCG_C1[IREFS] = 1 Internal Reference Select for clock source for FLL + MCG_C1[IRCLKEN] = 1 Internal Reference Clock Enable + FLL multipilication: + MCG_C4[DMX32] = 1 + MCG_C4[DRST_DRS] = 01 FLL factor 1464 * 32.768kHz = 48MHz + +chibios/os/hal/ports/KINETIS/K20x/hal_lld.c + k20x_clock_init(): called in __early_init() defined in board.c + disable watchdog and configure clock + + configurable macros: + KINETIS_NO_INIT: whether init or not + KINETIS_MCG_MODE: clock mode + KINETIS_MCG_MODE_FEI + KINETIS_MCG_MODE_PEE + hal/ports/KINETIS/K20x/hal_lld.h + + +chibios/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.h + PALConfig pal_default_config + boardInit() + __early_init() + macro definitions for board infos, freq and mcu type + +chibios/os/hal/boards/FREESCALE_FREEDOM_K20D50M/board.c + +USB + + +Startup +------- + common/ports/ARMCMx/GCC/crt0_v[67]m.s + Reset_Handler: startup code + common/ports/ARMCMx/GCC/crt1.c + __core_init(): weak + __early_init(): weak + __late_init(): weak + __default_exit(): weak + called from Reset_Handler of crt0 + common/ports/ARMCMx/GCC/vector.c + common/ports/ARMCMx/GCC/ld/*.ld + +chibios/os/common/ports/ARMCMx/compilers/GCC/ +├── crt0_v6m.s +├── crt0_v7m.s +├── crt1.c +├── ld +│   ├── MK20DX128BLDR3.ld +│   ├── MK20DX128BLDR4.ld +│   ├── MK20DX128.ld +│   ├── MK20DX256.ld +│   ├── MKL25Z128.ld +│   ├── MKL26Z128.ld +│   ├── MKL26Z64.ld +│   └── STM32L476xG.ld +├── mk +│   ├── startup_k20x5.mk +│   ├── startup_k20x7.mk +│   ├── startup_k20x.mk +│   ├── startup_kl2x.mk +│   └── startup_stm32l4xx.mk +├── rules.ld +├── rules.mk +└── vectors.c + +chibios/os/hal/ +├── boards +│   ├── FREESCALE_FREEDOM_K20D50M +│   │   ├── board.c +│   │   ├── board.h +│   │   └── board.mk +│   ├── MCHCK_K20 +│   │   ├── board.c +│   │   ├── board.h +│   │   └── board.mk +│   ├── PJRC_TEENSY_3 +│   │   ├── board.c +│   │   ├── board.h +│   │   └── board.mk +│   ├── PJRC_TEENSY_3_1 +│   │   ├── board.c +│   │   ├── board.h +│   │   └── board.mk +│   ├── PJRC_TEENSY_LC +│   │   ├── board.c +│   │   ├── board.h +│   │   └── board.mk +│   ├── readme.txt +│   ├── simulator +│   │   ├── board.c +│   │   ├── board.h +│   │   └── board.mk +│   ├── ST_NUCLEO_F030R8 +│   │   ├── board.c +│   │   ├── board.h +│   │   ├── board.mk +│   │   └── cfg +│   │   └── board.chcfg +├── hal.mk +├── include +│   ├── adc.h +│   ├── can.h +│   ├── dac.h +│   ├── ext.h +│   ├── gpt.h +│   ├── hal_channels.h +│   ├── hal_files.h +│   ├── hal.h +│   ├── hal_ioblock.h +│   ├── hal_mmcsd.h +│   ├── hal_queues.h +│   ├── hal_streams.h +│   ├── i2c.h +│   ├── i2s.h +│   ├── icu.h +│   ├── mac.h +│   ├── mii.h +│   ├── mmc_spi.h +│   ├── pal.h +│   ├── pwm.h +│   ├── rtc.h +│   ├── sdc.h +│   ├── serial.h +│   ├── serial_usb.h +│   ├── spi.h +│   ├── st.h +│   ├── uart.h +│   └── usb.h +├── lib +│   └── streams +│   ├── chprintf.c +│   ├── chprintf.h +│   ├── memstreams.c +│   ├── memstreams.h +│   ├── nullstreams.c +│   └── nullstreams.h +├── osal +│   ├── nil +│   │   ├── osal.c +│   │   ├── osal.h +│   │   └── osal.mk +│   ├── os-less +│   │   └── ARMCMx +│   │   ├── osal.c +│   │   ├── osal.h +│   │   └── osal.mk +│   └── rt +│   ├── osal.c +│   ├── osal.h +│   └── osal.mk +├── ports +│   ├── AVR +│   ├── common +│   │   └── ARMCMx +│   │   ├── mpu.h +│   │   ├── nvic.c +│   │   └── nvic.h +│   ├── KINETIS +│   │   ├── K20x +│   │   │   ├── hal_lld.c +│   │   │   ├── hal_lld.h +│   │   │   ├── kinetis_registry.h +│   │   │   ├── platform.dox +│   │   │   ├── platform.mk +│   │   │   ├── pwm_lld.c +│   │   │   ├── pwm_lld.h +│   │   │   ├── spi_lld.c +│   │   │   └── spi_lld.h +│   │   ├── KL2x +│   │   │   ├── hal_lld.c +│   │   │   ├── hal_lld.h +│   │   │   ├── kinetis_registry.h +│   │   │   ├── platform.mk +│   │   │   ├── pwm_lld.c +│   │   │   └── pwm_lld.h +│   │   ├── LLD +│   │   │   ├── adc_lld.c +│   │   │   ├── adc_lld.h +│   │   │   ├── ext_lld.c +│   │   │   ├── ext_lld.h +│   │   │   ├── gpt_lld.c +│   │   │   ├── gpt_lld.h +│   │   │   ├── i2c_lld.c +│   │   │   ├── i2c_lld.h +│   │   │   ├── pal_lld.c +│   │   │   ├── pal_lld.h +│   │   │   ├── serial_lld.c +│   │   │   ├── serial_lld.h +│   │   │   ├── st_lld.c +│   │   │   ├── st_lld.h +│   │   │   ├── usb_lld.c +│   │   │   └── usb_lld.h +│   │   └── README.md +│   ├── LPC +│   ├── simulator +│   └── STM32 +├── src +│   ├── adc.c +│   ├── can.c +│   ├── dac.c +│   ├── ext.c +│   ├── gpt.c +│   ├── hal.c +│   ├── hal_mmcsd.c +│   ├── hal_queues.c +│   ├── i2c.c +│   ├── i2s.c +│   ├── icu.c +│   ├── mac.c +│   ├── mmc_spi.c +│   ├── pal.c +│   ├── pwm.c +│   ├── rtc.c +│   ├── sdc.c +│   ├── serial.c +│   ├── serial_usb.c +│   ├── spi.c +│   ├── st.c +│   ├── uart.c +│   └── usb.c +└── templates + ├── adc_lld.c + ├── adc_lld.h + ├── can_lld.c + ├── can_lld.h + ├── dac_lld.c + ├── dac_lld.h + ├── ext_lld.c + ├── ext_lld.h + ├── gpt_lld.c + ├── gpt_lld.h + ├── halconf.h + ├── hal_lld.c + ├── hal_lld.h + ├── i2c_lld.c + ├── i2c_lld.h + ├── i2s_lld.c + ├── i2s_lld.h + ├── icu_lld.c + ├── icu_lld.h + ├── mac_lld.c + ├── mac_lld.h + ├── mcuconf.h + ├── osal + │   ├── osal.c + │   ├── osal.h + │   └── osal.mk + ├── pal_lld.c + ├── pal_lld.h + ├── platform.mk + ├── pwm_lld.c + ├── pwm_lld.h + ├── rtc_lld.c + ├── rtc_lld.h + ├── sdc_lld.c + ├── sdc_lld.h + ├── serial_lld.c + ├── serial_lld.h + ├── spi_lld.c + ├── spi_lld.h + ├── st_lld.c + ├── st_lld.h + ├── uart_lld.c + ├── uart_lld.h + ├── usb_lld.c + └── usb_lld.h diff --git a/keyboards/infinity_ergodox/Makefile b/keyboards/infinity_ergodox/Makefile new file mode 100644 index 000000000..7edc03d8c --- /dev/null +++ b/keyboards/infinity_ergodox/Makefile @@ -0,0 +1,85 @@ +# project specific files +SRC = matrix.c \ + led.c + +## chip/board settings +# - the next two should match the directories in +# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) +# - For Teensies, FAMILY = KINETIS and SERIES is either +# KL2x (LC) or K20x (3.0,3.1,3.2). +# - For Infinity KB, SERIES = K20x +MCU_FAMILY = KINETIS +MCU_SERIES = K20x + +# Linker script to use +# - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ +# or /ld/ +# - NOTE: a custom ld script is needed for EEPROM on Teensy LC +# - LDSCRIPT = +# - MKL26Z64 for Teensy LC +# - MK20DX128 for Teensy 3.0 +# - MK20DX256 for Teensy 3.1 and 3.2 +# - MK20DX128BLDR4 for Infinity 60% with Kiibohd bootloader +# - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader +MCU_LDSCRIPT = MK20DX256BLDR8 + +# Startup code to use +# - it should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ +# - STARTUP = +# - kl2x for Teensy LC +# - k20x5 for Teensy 3.0 and Infinity 60% +# - k20x7 for Teensy 3.1, 3.2 and Infinity ErgoDox +MCU_STARTUP = k20x7 + +# Board: it should exist either in /os/hal/boards/ +# or /boards +# - BOARD = +# - PJRC_TEENSY_LC for Teensy LC +# - PJRC_TEENSY_3 for Teensy 3.0 +# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2 +# - MCHCK_K20 for Infinity KB +#BOARD = MCHCK_K20 +BOARD = PJRC_TEENSY_3_1 + +# Cortex version +# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4 +MCU = cortex-m4 + +# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 +# I.e. 6 for Teensy LC; 7 for Teensy 3.x +ARMV = 7 + +# Vector table for application +# 0x00000000-0x00001000 area is occupied by bootlaoder.*/ +# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB +OPT_DEFS = -DCORTEX_VTOR_INIT=0x00002000 + +# Build Options +# comment out to disable the options. +# +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration +## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.) +MOUSEKEY_ENABLE ?= yes # Mouse keys +EXTRAKEY_ENABLE ?= yes # Audio control and System control +CONSOLE_ENABLE ?= yes # Console for debug +COMMAND_ENABLE ?= yes # Commands for debug and configuration +SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend +NKRO_ENABLE ?= yes # USB Nkey Rollover +CUSTOM_MATRIX ?= yes # Custom matrix file +SERIAL_LINK_ENABLE = yes +VISUALIZER_ENABLE ?= yes +LCD_ENABLE ?= yes +LED_ENABLE ?= yes +LCD_BACKLIGHT_ENABLE ?= yes + +ifdef LCD_ENABLE +include drivers/gdisp/st7565ergodox/driver.mk +endif + +ifdef LED_ENABLE +include drivers/gdisp/IS31FL3731C/driver.mk +endif + +ifndef QUANTUM_DIR + include ../../Makefile +endif \ No newline at end of file diff --git a/keyboards/infinity_ergodox/bootloader_defs.h b/keyboards/infinity_ergodox/bootloader_defs.h new file mode 100644 index 000000000..c67153be6 --- /dev/null +++ b/keyboards/infinity_ergodox/bootloader_defs.h @@ -0,0 +1 @@ +#define KIIBOHD_BOOTLOADER diff --git a/keyboards/infinity_ergodox/chconf.h b/keyboards/infinity_ergodox/chconf.h new file mode 100644 index 000000000..d59c35eb6 --- /dev/null +++ b/keyboards/infinity_ergodox/chconf.h @@ -0,0 +1,524 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef _CHCONF_H_ +#define _CHCONF_H_ + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 100000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 0 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 20 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM FALSE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief I/O Queues APIs. + * @details If enabled then the I/O queues APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_QUEUES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK FALSE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS FALSE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS FALSE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the context switch circular trace buffer is + * activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_TRACE FALSE + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK FALSE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS FALSE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + * + * @note It is inserted into lock zone. + * @note It is also invoked when the threads simply return in order to + * terminate. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* _CHCONF_H_ */ + +/** @} */ diff --git a/keyboards/stm32_f103_onekey/config.h b/keyboards/infinity_ergodox/config.h similarity index 70% rename from keyboards/stm32_f103_onekey/config.h rename to keyboards/infinity_ergodox/config.h index 19b14fe61..d24ee0f05 100644 --- a/keyboards/stm32_f103_onekey/config.h +++ b/keyboards/infinity_ergodox/config.h @@ -26,15 +26,14 @@ along with this program. If not, see . /* in python2: list(u"whatever".encode('utf-16-le')) */ /* at most 32 characters or the ugly hack in usb_main.c borks */ #define MANUFACTURER "TMK" -#define USBSTR_MANUFACTURER 'T', '\x00', 'M', '\x00', 'K', '\x00', ' ', '\x00', '\xc6', '\x00' -#define PRODUCT "ChibiOS TMK test" -#define USBSTR_PRODUCT 'C', '\x00', 'h', '\x00', 'i', '\x00', 'b', '\x00', 'i', '\x00', 'O', '\x00', 'S', '\x00', ' ', '\x00', 'T', '\x00', 'M', '\x00', 'K', '\x00', ' ', '\x00', 't', '\x00', 'e', '\x00', 's', '\x00', 't', '\x00' -#define DESCRIPTION "TMK keyboard firmware over ChibiOS" +#define USBSTR_MANUFACTURER 'T', '\x00', 'M', '\x00', 'K', '\x00', ' ', '\x00' +#define PRODUCT "Infinity keyboard/TMK" +#define USBSTR_PRODUCT 'I', '\x00', 'n', '\x00', 'f', '\x00', 'i', '\x00', 'n', '\x00', 'i', '\x00', 't', '\x00', 'y', '\x00', ' ', '\x00', 'k', '\x00', 'e', '\x00', 'y', '\x00', 'b', '\x00', 'o', '\x00', 'a', '\x00', 'r', '\x00', 'd', '\x00', '/', '\x00', 'T', '\x00', 'M', '\x00', 'K', '\x00' /* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 1 -#define DIODE_DIRECTION COL2ROW +#define MATRIX_ROWS 18 +#define MATRIX_COLS 5 +#define LOCAL_MATRIX_ROWS 9 /* define if matrix has ghost */ //#define MATRIX_HAS_GHOST @@ -43,16 +42,22 @@ along with this program. If not, see . #define DEBOUNCE 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE +//#define LOCKING_SUPPORT_ENABLE /* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE +//#define LOCKING_RESYNC_ENABLE /* key combination for command */ #define IS_COMMAND() ( \ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ ) +/* Keymap for Infiity prototype */ +#define INFINITY_PROTOTYPE +#define SERIAL_LINK_BAUD 562500 +#define SERIAL_LINK_THREAD_PRIORITY (NORMALPRIO - 1) +// The visualizer needs gfx thread priorities +#define VISUALIZER_THREAD_PRIORITY (NORMAL_PRIORITY - 2) /* * Feature disable options diff --git a/keyboards/infinity_ergodox/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h b/keyboards/infinity_ergodox/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h new file mode 100644 index 000000000..2ea73f1fb --- /dev/null +++ b/keyboards/infinity_ergodox/drivers/gdisp/IS31FL3731C/board_IS31FL3731C.h @@ -0,0 +1,113 @@ +/* +Copyright 2016 Fred Sundvik + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef _GDISP_LLD_BOARD_H +#define _GDISP_LLD_BOARD_H + +static const I2CConfig i2ccfg = { + 400000 // clock speed (Hz); 400kHz max for IS31 +}; + +#define GDISP_SCREEN_WIDTH 7 +#define GDISP_SCREEN_HEIGHT 7 + +static const uint8_t led_mask[] = { + 0xFF, 0x00, /* C1-1 -> C1-16 */ + 0xFF, 0x00, /* C2-1 -> C2-16 */ + 0xFF, 0x00, /* C3-1 -> C3-16 */ + 0xFF, 0x00, /* C4-1 -> C4-16 */ + 0x3F, 0x00, /* C5-1 -> C5-16 */ + 0x00, 0x00, /* C6-1 -> C6-16 */ + 0x00, 0x00, /* C7-1 -> C7-16 */ + 0x00, 0x00, /* C8-1 -> C8-16 */ + 0x00, 0x00, /* C9-1 -> C9-16 */ +}; + +// The address of the LED +#define LA(c, r) (c + r * 16 ) +// Need to be an address that is not mapped, but inside the range of the controller matrix +#define NA LA(8, 8) + +// The numbers in the comments are the led numbers DXX on the PCB +// The mapping is taken from the schematic of left hand side +static const uint8_t led_mapping[GDISP_SCREEN_HEIGHT][GDISP_SCREEN_WIDTH] = { +// 45 44 43 42 41 40 39 + { LA(1, 1), LA(1, 0), LA(0, 4), LA(0, 3), LA(0, 2), LA(0, 1), LA(0, 0)}, +// 52 51 50 49 48 47 46 + { LA(2, 3), LA(2, 2), LA(2, 1), LA(2, 0), LA(1, 4), LA(1, 3), LA(1, 2) }, +// 58 57 56 55 54 53 N/A + { LA(3, 4), LA(3, 3), LA(3, 2), LA(3, 1), LA(3, 0), LA(2, 4), NA }, +// 67 66 65 64 63 62 61 + { LA(5, 3), LA(5, 2), LA(5, 1), LA(5, 0), LA(4, 4), LA(4, 3), LA(4, 2) }, +// 76 75 74 73 72 60 59 + { LA(7, 3), LA(7, 2), LA(7, 1), LA(7, 0), LA(6, 3), LA(4, 1), LA(4, 0) }, +// N/A N/A N/A N/A N/A N/A 68 + { NA, NA, NA, NA, NA, NA, LA(5, 4) }, +// N/A N/A N/A N/A 71 70 69 + { NA, NA, NA, NA, LA(6, 2), LA(6, 1), LA(6, 0) }, +}; + + +#define IS31_ADDR_DEFAULT 0x74 // AD connected to GND +#define IS31_TIMEOUT 5000 + +static GFXINLINE void init_board(GDisplay *g) { + (void) g; + /* I2C pins */ + palSetPadMode(GPIOB, 0, PAL_MODE_ALTERNATIVE_2); // PTB0/I2C0/SCL + palSetPadMode(GPIOB, 1, PAL_MODE_ALTERNATIVE_2); // PTB1/I2C0/SDA + palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL); + palClearPad(GPIOB, 16); + /* start I2C */ + i2cStart(&I2CD1, &i2ccfg); + // try high drive (from kiibohd) + I2CD1.i2c->C2 |= I2Cx_C2_HDRS; + // try glitch fixing (from kiibohd) + I2CD1.i2c->FLT = 4; +} + +static GFXINLINE void post_init_board(GDisplay *g) { + (void) g; +} + +static GFXINLINE const uint8_t* get_led_mask(GDisplay* g) { + (void) g; + return led_mask; +} + +static GFXINLINE uint8_t get_led_address(GDisplay* g, uint16_t x, uint16_t y) +{ + (void) g; + return led_mapping[y][x]; +} + +static GFXINLINE void set_hardware_shutdown(GDisplay* g, bool shutdown) { + (void) g; + if(!shutdown) { + palSetPad(GPIOB, 16); + } + else { + palClearPad(GPIOB, 16); + } +} + +static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) { + (void) g; + i2cMasterTransmitTimeout(&I2CD1, IS31_ADDR_DEFAULT, data, length, 0, 0, US2ST(IS31_TIMEOUT)); +} + +#endif /* _GDISP_LLD_BOARD_H */ diff --git a/keyboards/infinity_ergodox/drivers/gdisp/IS31FL3731C/driver.mk b/keyboards/infinity_ergodox/drivers/gdisp/IS31FL3731C/driver.mk new file mode 100644 index 000000000..f32d0d868 --- /dev/null +++ b/keyboards/infinity_ergodox/drivers/gdisp/IS31FL3731C/driver.mk @@ -0,0 +1,2 @@ +GFXINC += drivers/gdisp/IS31FL3731C +GFXSRC += drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c diff --git a/keyboards/infinity_ergodox/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c b/keyboards/infinity_ergodox/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c new file mode 100644 index 000000000..1d21f0c49 --- /dev/null +++ b/keyboards/infinity_ergodox/drivers/gdisp/IS31FL3731C/gdisp_IS31FL3731C.c @@ -0,0 +1,333 @@ +/* +Copyright 2016 Fred Sundvik + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "gfx.h" + +#if GFX_USE_GDISP + +#define GDISP_DRIVER_VMT GDISPVMT_IS31FL3731C_ERGODOX +#include "drivers/gdisp/IS31FL3731C/gdisp_lld_config.h" +#include "src/gdisp/gdisp_driver.h" + +#include "board_IS31FL3731C.h" + +/*===========================================================================*/ +/* Driver local definitions. */ +/*===========================================================================*/ + +#ifndef GDISP_SCREEN_HEIGHT + #define GDISP_SCREEN_HEIGHT 9 +#endif +#ifndef GDISP_SCREEN_WIDTH + #define GDISP_SCREEN_WIDTH 16 +#endif +#ifndef GDISP_INITIAL_CONTRAST + #define GDISP_INITIAL_CONTRAST 0 +#endif +#ifndef GDISP_INITIAL_BACKLIGHT + #define GDISP_INITIAL_BACKLIGHT 100 +#endif + +#define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER<<0) + +#define IS31_ADDR_DEFAULT 0x74 + +#define IS31_REG_CONFIG 0x00 +// bits in reg +#define IS31_REG_CONFIG_PICTUREMODE 0x00 +#define IS31_REG_CONFIG_AUTOPLAYMODE 0x08 +#define IS31_REG_CONFIG_AUDIOPLAYMODE 0x18 +// D2:D0 bits are starting frame for autoplay mode + +#define IS31_REG_PICTDISP 0x01 // D2:D0 frame select for picture mode + +#define IS31_REG_AUTOPLAYCTRL1 0x02 +// D6:D4 number of loops (000=infty) +// D2:D0 number of frames to be used + +#define IS31_REG_AUTOPLAYCTRL2 0x03 // D5:D0 delay time (*11ms) + +#define IS31_REG_DISPLAYOPT 0x05 +#define IS31_REG_DISPLAYOPT_INTENSITY_SAME 0x20 // same intensity for all frames +#define IS31_REG_DISPLAYOPT_BLINK_ENABLE 0x8 +// D2:D0 bits blink period time (*0.27s) + +#define IS31_REG_AUDIOSYNC 0x06 +#define IS31_REG_AUDIOSYNC_ENABLE 0x1 + +#define IS31_REG_FRAMESTATE 0x07 + +#define IS31_REG_BREATHCTRL1 0x08 +// D6:D4 fade out time (26ms*2^i) +// D2:D0 fade in time (26ms*2^i) + +#define IS31_REG_BREATHCTRL2 0x09 +#define IS31_REG_BREATHCTRL2_ENABLE 0x10 +// D2:D0 extinguish time (3.5ms*2^i) + +#define IS31_REG_SHUTDOWN 0x0A +#define IS31_REG_SHUTDOWN_OFF 0x0 +#define IS31_REG_SHUTDOWN_ON 0x1 + +#define IS31_REG_AGCCTRL 0x0B +#define IS31_REG_ADCRATE 0x0C + +#define IS31_COMMANDREGISTER 0xFD +#define IS31_FUNCTIONREG 0x0B // helpfully called 'page nine' +#define IS31_FUNCTIONREG_SIZE 0xD + +#define IS31_FRAME_SIZE 0xB4 + +#define IS31_PWM_REG 0x24 +#define IS31_PWM_SIZE 0x90 + +#define IS31_LED_MASK_SIZE 0x12 +#define IS31_SCREEN_WIDTH 16 + +#define IS31 + +//Generated by http://jared.geek.nz/2013/feb/linear-led-pwm +const unsigned char cie[256] = { + 0, 0, 0, 0, 0, 1, 1, 1, 1, 1, + 1, 1, 1, 1, 2, 2, 2, 2, 2, 2, + 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, + 3, 4, 4, 4, 4, 4, 4, 5, 5, 5, + 5, 5, 6, 6, 6, 6, 6, 7, 7, 7, + 7, 8, 8, 8, 8, 9, 9, 9, 10, 10, + 10, 10, 11, 11, 11, 12, 12, 12, 13, 13, + 13, 14, 14, 15, 15, 15, 16, 16, 17, 17, + 17, 18, 18, 19, 19, 20, 20, 21, 21, 22, + 22, 23, 23, 24, 24, 25, 25, 26, 26, 27, + 28, 28, 29, 29, 30, 31, 31, 32, 32, 33, + 34, 34, 35, 36, 37, 37, 38, 39, 39, 40, + 41, 42, 43, 43, 44, 45, 46, 47, 47, 48, + 49, 50, 51, 52, 53, 54, 54, 55, 56, 57, + 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, + 68, 70, 71, 72, 73, 74, 75, 76, 77, 79, + 80, 81, 82, 83, 85, 86, 87, 88, 90, 91, + 92, 94, 95, 96, 98, 99, 100, 102, 103, 105, + 106, 108, 109, 110, 112, 113, 115, 116, 118, 120, + 121, 123, 124, 126, 128, 129, 131, 132, 134, 136, + 138, 139, 141, 143, 145, 146, 148, 150, 152, 154, + 155, 157, 159, 161, 163, 165, 167, 169, 171, 173, + 175, 177, 179, 181, 183, 185, 187, 189, 191, 193, + 196, 198, 200, 202, 204, 207, 209, 211, 214, 216, + 218, 220, 223, 225, 228, 230, 232, 235, 237, 240, + 242, 245, 247, 250, 252, 255, +}; + + +/*===========================================================================*/ +/* Driver local functions. */ +/*===========================================================================*/ + +typedef struct{ + uint8_t write_buffer_offset; + uint8_t write_buffer[IS31_FRAME_SIZE]; + uint8_t frame_buffer[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH]; + uint8_t page; +}__attribute__((__packed__)) PrivData; + +// Some common routines and macros +#define PRIV(g) ((PrivData*)g->priv) + +/*===========================================================================*/ +/* Driver exported functions. */ +/*===========================================================================*/ + +static GFXINLINE void write_page(GDisplay* g, uint8_t page) { + uint8_t tx[2] __attribute__((aligned(2))); + tx[0] = IS31_COMMANDREGISTER; + tx[1] = page; + write_data(g, tx, 2); +} + +static GFXINLINE void write_register(GDisplay* g, uint8_t page, uint8_t reg, uint8_t data) { + uint8_t tx[2] __attribute__((aligned(2))); + tx[0] = reg; + tx[1] = data; + write_page(g, page); + write_data(g, tx, 2); +} + +static GFXINLINE void write_ram(GDisplay *g, uint8_t page, uint16_t offset, uint16_t length) { + PRIV(g)->write_buffer_offset = offset; + write_page(g, page); + write_data(g, (uint8_t*)PRIV(g), length + 1); +} + +LLDSPEC bool_t gdisp_lld_init(GDisplay *g) { + // The private area is the display surface. + g->priv = gfxAlloc(sizeof(PrivData)); + __builtin_memset(PRIV(g), 0, sizeof(PrivData)); + PRIV(g)->page = 0; + + // Initialise the board interface + init_board(g); + gfxSleepMilliseconds(10); + + // zero function page, all registers (assuming full_page is all zeroes) + write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE); + set_hardware_shutdown(g, false); + gfxSleepMilliseconds(10); + // software shutdown + write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); + gfxSleepMilliseconds(10); + // zero function page, all registers + write_ram(g, IS31_FUNCTIONREG, 0, IS31_FUNCTIONREG_SIZE); + gfxSleepMilliseconds(10); + + + // zero all LED registers on all 8 pages, and enable the mask + __builtin_memcpy(PRIV(g)->write_buffer, get_led_mask(g), IS31_LED_MASK_SIZE); + for(uint8_t i=0; i<8; i++) { + write_ram(g, i, 0, IS31_FRAME_SIZE); + gfxSleepMilliseconds(1); + } + + // software shutdown disable (i.e. turn stuff on) + write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON); + gfxSleepMilliseconds(10); + + // Finish Init + post_init_board(g); + + /* Initialise the GDISP structure */ + g->g.Width = GDISP_SCREEN_WIDTH; + g->g.Height = GDISP_SCREEN_HEIGHT; + g->g.Orientation = GDISP_ROTATE_0; + g->g.Powermode = powerOn; + g->g.Backlight = GDISP_INITIAL_BACKLIGHT; + g->g.Contrast = GDISP_INITIAL_CONTRAST; + return TRUE; +} + +#if GDISP_HARDWARE_FLUSH + LLDSPEC void gdisp_lld_flush(GDisplay *g) { + // Don't flush if we don't need it. + if (!(g->flags & GDISP_FLG_NEEDFLUSH)) + return; + + PRIV(g)->page++; + PRIV(g)->page %= 2; + // TODO: some smarter algorithm for this + // We should run only one physical page at a time + // This way we don't need to send so much data, and + // we could use slightly less memory + uint8_t* src = PRIV(g)->frame_buffer; + for (int y=0;ywrite_buffer[get_led_address(g, x, y)]=cie[*src]; + ++src; + } + } + write_ram(g, PRIV(g)->page, IS31_PWM_REG, IS31_PWM_SIZE); + gfxSleepMilliseconds(1); + write_register(g, IS31_FUNCTIONREG, IS31_REG_PICTDISP, PRIV(g)->page); + + g->flags &= ~GDISP_FLG_NEEDFLUSH; + } +#endif + +#if GDISP_HARDWARE_DRAWPIXEL + LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) { + coord_t x, y; + + switch(g->g.Orientation) { + default: + case GDISP_ROTATE_0: + x = g->p.x; + y = g->p.y; + break; + case GDISP_ROTATE_180: + x = GDISP_SCREEN_WIDTH-1 - g->p.x; + y = g->p.y; + break; + } + PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x] = gdispColor2Native(g->p.color); + g->flags |= GDISP_FLG_NEEDFLUSH; + } +#endif + +#if GDISP_HARDWARE_PIXELREAD + LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) { + coord_t x, y; + + switch(g->g.Orientation) { + default: + case GDISP_ROTATE_0: + x = g->p.x; + y = g->p.y; + break; + case GDISP_ROTATE_180: + x = GDISP_SCREEN_WIDTH-1 - g->p.x; + y = g->p.y; + break; + } + return gdispNative2Color(PRIV(g)->frame_buffer[y * GDISP_SCREEN_WIDTH + x]); + } +#endif + +#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL + LLDSPEC void gdisp_lld_control(GDisplay *g) { + switch(g->p.x) { + case GDISP_CONTROL_POWER: + if (g->g.Powermode == (powermode_t)g->p.ptr) + return; + switch((powermode_t)g->p.ptr) { + case powerOff: + case powerSleep: + case powerDeepSleep: + write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_OFF); + break; + case powerOn: + write_register(g, IS31_FUNCTIONREG, IS31_REG_SHUTDOWN, IS31_REG_SHUTDOWN_ON); + break; + default: + return; + } + g->g.Powermode = (powermode_t)g->p.ptr; + return; + + case GDISP_CONTROL_ORIENTATION: + if (g->g.Orientation == (orientation_t)g->p.ptr) + return; + switch((orientation_t)g->p.ptr) { + /* Rotation is handled by the drawing routines */ + case GDISP_ROTATE_0: + case GDISP_ROTATE_180: + g->g.Height = GDISP_SCREEN_HEIGHT; + g->g.Width = GDISP_SCREEN_WIDTH; + break; + case GDISP_ROTATE_90: + case GDISP_ROTATE_270: + g->g.Height = GDISP_SCREEN_WIDTH; + g->g.Width = GDISP_SCREEN_HEIGHT; + break; + default: + return; + } + g->g.Orientation = (orientation_t)g->p.ptr; + return; + + case GDISP_CONTROL_CONTRAST: + return; + } + } +#endif // GDISP_NEED_CONTROL + +#endif // GFX_USE_GDISP diff --git a/keyboards/infinity_ergodox/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h b/keyboards/infinity_ergodox/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h new file mode 100644 index 000000000..bb28ad775 --- /dev/null +++ b/keyboards/infinity_ergodox/drivers/gdisp/IS31FL3731C/gdisp_lld_config.h @@ -0,0 +1,36 @@ +/* +Copyright 2016 Fred Sundvik + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef _GDISP_LLD_CONFIG_H +#define _GDISP_LLD_CONFIG_H + +#if GFX_USE_GDISP + +/*===========================================================================*/ +/* Driver hardware support. */ +/*===========================================================================*/ + +#define GDISP_HARDWARE_FLUSH TRUE // This controller requires flushing +#define GDISP_HARDWARE_DRAWPIXEL TRUE +#define GDISP_HARDWARE_PIXELREAD TRUE +#define GDISP_HARDWARE_CONTROL TRUE + +#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_GRAY256 + +#endif /* GFX_USE_GDISP */ + +#endif /* _GDISP_LLD_CONFIG_H */ diff --git a/keyboards/infinity_ergodox/drivers/gdisp/emulator_lcd/driver.mk b/keyboards/infinity_ergodox/drivers/gdisp/emulator_lcd/driver.mk new file mode 100644 index 000000000..16c3f80f5 --- /dev/null +++ b/keyboards/infinity_ergodox/drivers/gdisp/emulator_lcd/driver.mk @@ -0,0 +1,2 @@ +GFXINC += drivers/gdisp/emulator_lcd +GFXSRC += drivers/gdisp/emulator_lcd/emulator_lcd.c diff --git a/keyboards/infinity_ergodox/drivers/gdisp/emulator_lcd/emulator_lcd.c b/keyboards/infinity_ergodox/drivers/gdisp/emulator_lcd/emulator_lcd.c new file mode 100644 index 000000000..babfe2b36 --- /dev/null +++ b/keyboards/infinity_ergodox/drivers/gdisp/emulator_lcd/emulator_lcd.c @@ -0,0 +1,10 @@ +#define GDISP_DRIVER_VMT GDISPVMT_EMULATOR_LCD_ERGODOX +#define GDISP_HARDWARE_DRAWPIXEL TRUE +#define GDISP_HARDWARE_PIXELREAD TRUE +#define GDISP_HARDWARE_CONTROL TRUE +#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_MONO +#define GDISP_SCREEN_WIDTH 128 +#define GDISP_SCREEN_HEIGHT 32 +#define ROTATE_180_IS_FLIP + +#include "emulator/emulator_driver_impl.h" diff --git a/keyboards/infinity_ergodox/drivers/gdisp/emulator_led/driver.mk b/keyboards/infinity_ergodox/drivers/gdisp/emulator_led/driver.mk new file mode 100644 index 000000000..255434432 --- /dev/null +++ b/keyboards/infinity_ergodox/drivers/gdisp/emulator_led/driver.mk @@ -0,0 +1,2 @@ +GFXINC += drivers/gdisp/emulator_led +GFXSRC += drivers/gdisp/emulator_led/emulator_led.c diff --git a/keyboards/infinity_ergodox/drivers/gdisp/emulator_led/emulator_led.c b/keyboards/infinity_ergodox/drivers/gdisp/emulator_led/emulator_led.c new file mode 100644 index 000000000..b0ebcdc47 --- /dev/null +++ b/keyboards/infinity_ergodox/drivers/gdisp/emulator_led/emulator_led.c @@ -0,0 +1,10 @@ +#define GDISP_DRIVER_VMT GDISPVMT_EMULATOR_LED_ERGODOX +#define GDISP_HARDWARE_DRAWPIXEL TRUE +#define GDISP_HARDWARE_PIXELREAD TRUE +#define GDISP_HARDWARE_CONTROL TRUE +#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_MONO +#define GDISP_SCREEN_WIDTH 7 +#define GDISP_SCREEN_HEIGHT 7 +#define ROTATE_180_IS_FLIP + +#include "emulator/emulator_driver_impl.h" diff --git a/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/board_ST7565.h b/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/board_ST7565.h new file mode 100644 index 000000000..290571ce5 --- /dev/null +++ b/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/board_ST7565.h @@ -0,0 +1,127 @@ +/* + * This file is subject to the terms of the GFX License. If a copy of + * the license was not distributed with this file, you can obtain one at: + * + * http://ugfx.org/license.html + */ + +#ifndef _GDISP_LLD_BOARD_H +#define _GDISP_LLD_BOARD_H + +#include "print.h" + +#define ST7565_LCD_BIAS ST7565_LCD_BIAS_9 // actually 6 +#define ST7565_ADC ST7565_ADC_NORMAL +#define ST7565_COM_SCAN ST7565_COM_SCAN_DEC +#define ST7565_PAGE_ORDER 0,1,2,3 +/* + * Custom page order for several LCD boards, e.g. HEM12864-99 + * #define ST7565_PAGE_ORDER 4,5,6,7,0,1,2,3 + */ + +#define ST7565_GPIOPORT GPIOC +#define ST7565_PORT PORTC +#define ST7565_A0_PIN 7 +#define ST7565_RST_PIN 8 +#define ST7565_MOSI_PIN 6 +#define ST7565_SLCK_PIN 5 +#define ST7565_SS_PIN 4 + +#define palSetPadModeRaw(portname, bits) \ + ST7565_PORT->PCR[ST7565_##portname##_PIN] = bits + +#define palSetPadModeNamed(portname, portmode) \ + palSetPadMode(ST7565_GPIOPORT, ST7565_##portname##_PIN, portmode) + +#define ST7565_SPI_MODE PORTx_PCRn_DSE | PORTx_PCRn_MUX(2) +// DSPI Clock and Transfer Attributes +// Frame Size: 8 bits +// MSB First +// CLK Low by default +static const SPIConfig spi1config = { + NULL, + /* HW dependent part.*/ + ST7565_GPIOPORT, + ST7565_SS_PIN, + SPIx_CTARn_FMSZ(7) + | SPIx_CTARn_ASC(7) + | SPIx_CTARn_DT(7) + | SPIx_CTARn_CSSCK(7) + | SPIx_CTARn_PBR(0) + | SPIx_CTARn_BR(7) + //SPI_CR1_BR_0 +}; + +static bool_t st7565_is_data_mode = 1; + +static GFXINLINE void init_board(GDisplay *g) { + (void) g; + palSetPadModeNamed(A0, PAL_MODE_OUTPUT_PUSHPULL); + palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN); + st7565_is_data_mode = 1; + palSetPadModeNamed(RST, PAL_MODE_OUTPUT_PUSHPULL); + palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN); + palSetPadModeRaw(MOSI, ST7565_SPI_MODE); + palSetPadModeRaw(SLCK, ST7565_SPI_MODE); + palSetPadModeRaw(SS, ST7565_SPI_MODE); + + spiInit(); + spiStart(&SPID1, &spi1config); + spiSelect(&SPID1); +} + +static GFXINLINE void post_init_board(GDisplay *g) { + (void) g; +} + +static GFXINLINE void setpin_reset(GDisplay *g, bool_t state) { + (void) g; + if (state) { + palClearPad(ST7565_GPIOPORT, ST7565_RST_PIN); + } + else { + palSetPad(ST7565_GPIOPORT, ST7565_RST_PIN); + } +} + +static GFXINLINE void acquire_bus(GDisplay *g) { + (void) g; + // Only the LCD is using the SPI bus, so no need to acquire + // spiAcquireBus(&SPID1); +} + +static GFXINLINE void release_bus(GDisplay *g) { + (void) g; + // Only the LCD is using the SPI bus, so no need to release + //spiReleaseBus(&SPID1); +} + +static GFXINLINE void write_cmd(GDisplay *g, uint8_t cmd) { + (void) g; + if (st7565_is_data_mode) { + // The sleeps need to be at lest 10 vs 25 ns respectively + // So let's sleep two ticks, one tick might not be enough + // if we are at the end of the tick + chThdSleep(2); + palClearPad(ST7565_GPIOPORT, ST7565_A0_PIN); + chThdSleep(2); + st7565_is_data_mode = 0; + } + spiSend(&SPID1, 1, &cmd); +} + +static GFXINLINE void write_data(GDisplay *g, uint8_t* data, uint16_t length) { + (void) g; + if (!st7565_is_data_mode) { + // The sleeps need to be at lest 10 vs 25 ns respectively + // So let's sleep two ticks, one tick might not be enough + // if we are at the end of the tick + chThdSleep(2); + palSetPad(ST7565_GPIOPORT, ST7565_A0_PIN); + chThdSleep(2); + st7565_is_data_mode = 1; + } + spiSend(&SPID1, length, data); +} + +#endif /* _GDISP_LLD_BOARD_H */ diff --git a/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/driver.mk b/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/driver.mk new file mode 100644 index 000000000..889a1a031 --- /dev/null +++ b/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/driver.mk @@ -0,0 +1,2 @@ +GFXINC += drivers/gdisp/st7565ergodox +GFXSRC += drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c diff --git a/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c b/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c new file mode 100644 index 000000000..c33aea81a --- /dev/null +++ b/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/gdisp_lld_ST7565.c @@ -0,0 +1,292 @@ +/* + * This file is subject to the terms of the GFX License. If a copy of + * the license was not distributed with this file, you can obtain one at: + * + * http://ugfx.org/license.html + */ + +#include "gfx.h" + +#if GFX_USE_GDISP + +#define GDISP_DRIVER_VMT GDISPVMT_ST7565_ERGODOX +#include "drivers/gdisp/st7565ergodox/gdisp_lld_config.h" +#include "src/gdisp/gdisp_driver.h" + +#include "board_ST7565.h" + +/*===========================================================================*/ +/* Driver local definitions. */ +/*===========================================================================*/ + +#ifndef GDISP_SCREEN_HEIGHT + #define GDISP_SCREEN_HEIGHT 32 +#endif +#ifndef GDISP_SCREEN_WIDTH + #define GDISP_SCREEN_WIDTH 128 +#endif +#ifndef GDISP_INITIAL_CONTRAST + #define GDISP_INITIAL_CONTRAST 0 +#endif +#ifndef GDISP_INITIAL_BACKLIGHT + #define GDISP_INITIAL_BACKLIGHT 100 +#endif + +#define GDISP_FLG_NEEDFLUSH (GDISP_FLG_DRIVER<<0) + +#include "drivers/gdisp/st7565ergodox/st7565.h" + +/*===========================================================================*/ +/* Driver config defaults for backward compatibility. */ +/*===========================================================================*/ +#ifndef ST7565_LCD_BIAS + #define ST7565_LCD_BIAS ST7565_LCD_BIAS_7 +#endif +#ifndef ST7565_ADC + #define ST7565_ADC ST7565_ADC_NORMAL +#endif +#ifndef ST7565_COM_SCAN + #define ST7565_COM_SCAN ST7565_COM_SCAN_INC +#endif +#ifndef ST7565_PAGE_ORDER + #define ST7565_PAGE_ORDER 0,1,2,3 +#endif + +/*===========================================================================*/ +/* Driver local functions. */ +/*===========================================================================*/ + +typedef struct{ + bool_t buffer2; + uint8_t ram[GDISP_SCREEN_HEIGHT * GDISP_SCREEN_WIDTH / 8]; +}PrivData; + +// Some common routines and macros +#define PRIV(g) ((PrivData*)g->priv) +#define RAM(g) (PRIV(g)->ram) +#define write_cmd2(g, cmd1, cmd2) { write_cmd(g, cmd1); write_cmd(g, cmd2); } +#define write_cmd3(g, cmd1, cmd2, cmd3) { write_cmd(g, cmd1); write_cmd(g, cmd2); write_cmd(g, cmd3); } + +// Some common routines and macros +#define delay(us) gfxSleepMicroseconds(us) +#define delay_ms(ms) gfxSleepMilliseconds(ms) + +#define xyaddr(x, y) ((x) + ((y)>>3)*GDISP_SCREEN_WIDTH) +#define xybit(y) (1<<((y)&7)) + +/*===========================================================================*/ +/* Driver exported functions. */ +/*===========================================================================*/ + +/* + * As this controller can't update on a pixel boundary we need to maintain the + * the entire display surface in memory so that we can do the necessary bit + * operations. Fortunately it is a small display in monochrome. + * 64 * 128 / 8 = 1024 bytes. + */ + +LLDSPEC bool_t gdisp_lld_init(GDisplay *g) { + // The private area is the display surface. + g->priv = gfxAlloc(sizeof(PrivData)); + PRIV(g)->buffer2 = false; + + // Initialise the board interface + init_board(g); + + // Hardware reset + setpin_reset(g, TRUE); + gfxSleepMilliseconds(20); + setpin_reset(g, FALSE); + gfxSleepMilliseconds(20); + + acquire_bus(g); + write_cmd(g, ST7565_DISPLAY_OFF); + write_cmd(g, ST7565_LCD_BIAS); + write_cmd(g, ST7565_ADC); + write_cmd(g, ST7565_COM_SCAN); + + write_cmd(g, ST7565_START_LINE | 0); + + write_cmd(g, ST7565_RESISTOR_RATIO | 0x6); + + // turn on voltage converter (VC=1, VR=0, VF=0) + write_cmd(g, ST7565_POWER_CONTROL | 0x04); + delay_ms(50); + + // turn on voltage regulator (VC=1, VR=1, VF=0) + write_cmd(g, ST7565_POWER_CONTROL | 0x06); + delay_ms(50); + + // turn on voltage follower (VC=1, VR=1, VF=1) + write_cmd(g, ST7565_POWER_CONTROL | 0x07); + delay_ms(50); + + write_cmd(g, 0xE2); + write_cmd(g, ST7565_COM_SCAN); + write_cmd2(g, ST7565_CONTRAST, GDISP_INITIAL_CONTRAST*64/101); + //write_cmd2(g, ST7565_CONTRAST, 0); + write_cmd(g, ST7565_DISPLAY_ON); + write_cmd(g, ST7565_ALLON_NORMAL); + write_cmd(g, ST7565_INVERT_DISPLAY); + + write_cmd(g, ST7565_RMW); + + // Finish Init + post_init_board(g); + + // Release the bus + release_bus(g); + + /* Initialise the GDISP structure */ + g->g.Width = GDISP_SCREEN_WIDTH; + g->g.Height = GDISP_SCREEN_HEIGHT; + g->g.Orientation = GDISP_ROTATE_0; + g->g.Powermode = powerOn; + g->g.Backlight = GDISP_INITIAL_BACKLIGHT; + g->g.Contrast = GDISP_INITIAL_CONTRAST; + return TRUE; +} + +#if GDISP_HARDWARE_FLUSH + LLDSPEC void gdisp_lld_flush(GDisplay *g) { + unsigned p; + + // Don't flush if we don't need it. + if (!(g->flags & GDISP_FLG_NEEDFLUSH)) + return; + + acquire_bus(g); + unsigned dstOffset = (PRIV(g)->buffer2 ? 4 : 0); + for (p = 0; p < 4; p++) { + write_cmd(g, ST7565_PAGE | (p + dstOffset)); + write_cmd(g, ST7565_COLUMN_MSB | 0); + write_cmd(g, ST7565_COLUMN_LSB | 0); + write_cmd(g, ST7565_RMW); + write_data(g, RAM(g) + (p*GDISP_SCREEN_WIDTH), GDISP_SCREEN_WIDTH); + } + unsigned line = (PRIV(g)->buffer2 ? 32 : 0); + write_cmd(g, ST7565_START_LINE | line); + PRIV(g)->buffer2 = !PRIV(g)->buffer2; + release_bus(g); + + g->flags &= ~GDISP_FLG_NEEDFLUSH; + } +#endif + +#if GDISP_HARDWARE_DRAWPIXEL + LLDSPEC void gdisp_lld_draw_pixel(GDisplay *g) { + coord_t x, y; + + switch(g->g.Orientation) { + default: + case GDISP_ROTATE_0: + x = g->p.x; + y = g->p.y; + break; + case GDISP_ROTATE_90: + x = g->p.y; + y = GDISP_SCREEN_HEIGHT-1 - g->p.x; + break; + case GDISP_ROTATE_180: + x = GDISP_SCREEN_WIDTH-1 - g->p.x; + y = GDISP_SCREEN_HEIGHT-1 - g->p.y; + break; + case GDISP_ROTATE_270: + x = GDISP_SCREEN_HEIGHT-1 - g->p.y; + y = g->p.x; + break; + } + if (gdispColor2Native(g->p.color) != Black) + RAM(g)[xyaddr(x, y)] |= xybit(y); + else + RAM(g)[xyaddr(x, y)] &= ~xybit(y); + g->flags |= GDISP_FLG_NEEDFLUSH; + } +#endif + +#if GDISP_HARDWARE_PIXELREAD + LLDSPEC color_t gdisp_lld_get_pixel_color(GDisplay *g) { + coord_t x, y; + + switch(g->g.Orientation) { + default: + case GDISP_ROTATE_0: + x = g->p.x; + y = g->p.y; + break; + case GDISP_ROTATE_90: + x = g->p.y; + y = GDISP_SCREEN_HEIGHT-1 - g->p.x; + break; + case GDISP_ROTATE_180: + x = GDISP_SCREEN_WIDTH-1 - g->p.x; + y = GDISP_SCREEN_HEIGHT-1 - g->p.y; + break; + case GDISP_ROTATE_270: + x = GDISP_SCREEN_HEIGHT-1 - g->p.y; + y = g->p.x; + break; + } + return (RAM(g)[xyaddr(x, y)] & xybit(y)) ? White : Black; + } +#endif + +#if GDISP_NEED_CONTROL && GDISP_HARDWARE_CONTROL + LLDSPEC void gdisp_lld_control(GDisplay *g) { + switch(g->p.x) { + case GDISP_CONTROL_POWER: + if (g->g.Powermode == (powermode_t)g->p.ptr) + return; + switch((powermode_t)g->p.ptr) { + case powerOff: + case powerSleep: + case powerDeepSleep: + acquire_bus(g); + write_cmd(g, ST7565_DISPLAY_OFF); + release_bus(g); + break; + case powerOn: + acquire_bus(g); + write_cmd(g, ST7565_DISPLAY_ON); + release_bus(g); + break; + default: + return; + } + g->g.Powermode = (powermode_t)g->p.ptr; + return; + + case GDISP_CONTROL_ORIENTATION: + if (g->g.Orientation == (orientation_t)g->p.ptr) + return; + switch((orientation_t)g->p.ptr) { + /* Rotation is handled by the drawing routines */ + case GDISP_ROTATE_0: + case GDISP_ROTATE_180: + g->g.Height = GDISP_SCREEN_HEIGHT; + g->g.Width = GDISP_SCREEN_WIDTH; + break; + case GDISP_ROTATE_90: + case GDISP_ROTATE_270: + g->g.Height = GDISP_SCREEN_WIDTH; + g->g.Width = GDISP_SCREEN_HEIGHT; + break; + default: + return; + } + g->g.Orientation = (orientation_t)g->p.ptr; + return; + + case GDISP_CONTROL_CONTRAST: + if ((unsigned)g->p.ptr > 100) + g->p.ptr = (void *)100; + acquire_bus(g); + write_cmd2(g, ST7565_CONTRAST, ((((unsigned)g->p.ptr)<<6)/101) & 0x3F); + release_bus(g); + g->g.Contrast = (unsigned)g->p.ptr; + return; + } + } +#endif // GDISP_NEED_CONTROL + +#endif // GFX_USE_GDISP diff --git a/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/gdisp_lld_config.h b/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/gdisp_lld_config.h new file mode 100644 index 000000000..48587b9e1 --- /dev/null +++ b/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/gdisp_lld_config.h @@ -0,0 +1,26 @@ +/* + * This file is subject to the terms of the GFX License. If a copy of + * the license was not distributed with this file, you can obtain one at: + * + * http://ugfx.org/license.html + */ + +#ifndef _GDISP_LLD_CONFIG_H +#define _GDISP_LLD_CONFIG_H + +#if GFX_USE_GDISP + +/*===========================================================================*/ +/* Driver hardware support. */ +/*===========================================================================*/ + +#define GDISP_HARDWARE_FLUSH TRUE // This controller requires flushing +#define GDISP_HARDWARE_DRAWPIXEL TRUE +#define GDISP_HARDWARE_PIXELREAD TRUE +#define GDISP_HARDWARE_CONTROL TRUE + +#define GDISP_LLD_PIXELFORMAT GDISP_PIXELFORMAT_MONO + +#endif /* GFX_USE_GDISP */ + +#endif /* _GDISP_LLD_CONFIG_H */ diff --git a/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/st7565.h b/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/st7565.h new file mode 100644 index 000000000..48636b33d --- /dev/null +++ b/keyboards/infinity_ergodox/drivers/gdisp/st7565ergodox/st7565.h @@ -0,0 +1,37 @@ +/* + * This file is subject to the terms of the GFX License. If a copy of + * the license was not distributed with this file, you can obtain one at: + * + * http://ugfx.org/license.html + */ + +#ifndef _ST7565_H +#define _ST7565_H + +#define ST7565_CONTRAST 0x81 +#define ST7565_ALLON_NORMAL 0xA4 +#define ST7565_ALLON 0xA5 +#define ST7565_POSITIVE_DISPLAY 0xA6 +#define ST7565_INVERT_DISPLAY 0xA7 +#define ST7565_DISPLAY_OFF 0xAE +#define ST7565_DISPLAY_ON 0xAF + +#define ST7565_LCD_BIAS_7 0xA3 +#define ST7565_LCD_BIAS_9 0xA2 + +#define ST7565_ADC_NORMAL 0xA0 +#define ST7565_ADC_REVERSE 0xA1 + +#define ST7565_COM_SCAN_INC 0xC0 +#define ST7565_COM_SCAN_DEC 0xC8 + +#define ST7565_START_LINE 0x40 +#define ST7565_PAGE 0xB0 +#define ST7565_COLUMN_MSB 0x10 +#define ST7565_COLUMN_LSB 0x00 +#define ST7565_RMW 0xE0 + +#define ST7565_RESISTOR_RATIO 0x20 +#define ST7565_POWER_CONTROL 0x28 + +#endif /* _ST7565_H */ diff --git a/keyboards/infinity_ergodox/gfxconf.h b/keyboards/infinity_ergodox/gfxconf.h new file mode 100644 index 000000000..8caa577b7 --- /dev/null +++ b/keyboards/infinity_ergodox/gfxconf.h @@ -0,0 +1,331 @@ +/** + * This file has a different license to the rest of the uGFX system. + * You can copy, modify and distribute this file as you see fit. + * You do not need to publish your source modifications to this file. + * The only thing you are not permitted to do is to relicense it + * under a different license. + */ + +/** + * Copy this file into your project directory and rename it as gfxconf.h + * Edit your copy to turn on the uGFX features you want to use. + * The values below are the defaults. + * + * Only remove the comments from lines where you want to change the + * default value. This allows definitions to be included from + * driver makefiles when required and provides the best future + * compatibility for your project. + * + * Please use spaces instead of tabs in this file. + */ + +#ifndef _GFXCONF_H +#define _GFXCONF_H + + +/////////////////////////////////////////////////////////////////////////// +// GOS - One of these must be defined, preferably in your Makefile // +/////////////////////////////////////////////////////////////////////////// +//#define GFX_USE_OS_CHIBIOS TRUE +//#define GFX_USE_OS_FREERTOS FALSE +// #define GFX_FREERTOS_USE_TRACE FALSE +//#define GFX_USE_OS_WIN32 FALSE +//#define GFX_USE_OS_LINUX FALSE +//#define GFX_USE_OS_OSX FALSE +//#define GFX_USE_OS_ECOS FALSE +//#define GFX_USE_OS_RAWRTOS FALSE +//#define GFX_USE_OS_ARDUINO FALSE +//#define GFX_USE_OS_KEIL FALSE +//#define GFX_USE_OS_CMSIS FALSE +//#define GFX_USE_OS_RAW32 FALSE +// #define INTERRUPTS_OFF() optional_code +// #define INTERRUPTS_ON() optional_code +// These are not defined by default for some reason +#define GOS_NEED_X_THREADS FALSE +#define GOS_NEED_X_HEAP FALSE + +// Options that (should where relevant) apply to all operating systems + #define GFX_NO_INLINE FALSE +// #define GFX_COMPILER GFX_COMPILER_UNKNOWN +// #define GFX_CPU GFX_CPU_UNKNOWN +// #define GFX_OS_HEAP_SIZE 0 +// #define GFX_OS_NO_INIT FALSE +// #define GFX_OS_INIT_NO_WARNING FALSE +// #define GFX_OS_PRE_INIT_FUNCTION myHardwareInitRoutine +// #define GFX_OS_EXTRA_INIT_FUNCTION myOSInitRoutine +// #define GFX_OS_EXTRA_DEINIT_FUNCTION myOSDeInitRoutine + + +/////////////////////////////////////////////////////////////////////////// +// GDISP // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GDISP TRUE + +//#define GDISP_NEED_AUTOFLUSH FALSE +//#define GDISP_NEED_TIMERFLUSH FALSE +//#define GDISP_NEED_VALIDATION TRUE +//#define GDISP_NEED_CLIP TRUE +#define GDISP_NEED_CIRCLE TRUE +#define GDISP_NEED_ELLIPSE TRUE +#define GDISP_NEED_ARC TRUE +#define GDISP_NEED_ARCSECTORS TRUE +#define GDISP_NEED_CONVEX_POLYGON TRUE +//#define GDISP_NEED_SCROLL FALSE +#define GDISP_NEED_PIXELREAD TRUE +#define GDISP_NEED_CONTROL TRUE +//#define GDISP_NEED_QUERY FALSE +//#define GDISP_NEED_MULTITHREAD FALSE +//#define GDISP_NEED_STREAMING FALSE +#define GDISP_NEED_TEXT TRUE +// #define GDISP_NEED_TEXT_WORDWRAP FALSE +// #define GDISP_NEED_ANTIALIAS FALSE +// #define GDISP_NEED_UTF8 FALSE + #define GDISP_NEED_TEXT_KERNING TRUE +// #define GDISP_INCLUDE_FONT_UI1 FALSE +// #define GDISP_INCLUDE_FONT_UI2 FALSE // The smallest preferred font. +// #define GDISP_INCLUDE_FONT_LARGENUMBERS FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS10 FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS12 FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS16 FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS20 FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS24 FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS32 FALSE + #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12 TRUE +// #define GDISP_INCLUDE_FONT_FIXED_10X20 FALSE +// #define GDISP_INCLUDE_FONT_FIXED_7X14 FALSE + #define GDISP_INCLUDE_FONT_FIXED_5X8 TRUE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS12_AA FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS16_AA FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS20_AA FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS24_AA FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS32_AA FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12_AA FALSE +// #define GDISP_INCLUDE_USER_FONTS FALSE + +//#define GDISP_NEED_IMAGE FALSE +// #define GDISP_NEED_IMAGE_NATIVE FALSE +// #define GDISP_NEED_IMAGE_GIF FALSE +// #define GDISP_NEED_IMAGE_BMP FALSE +// #define GDISP_NEED_IMAGE_BMP_1 FALSE +// #define GDISP_NEED_IMAGE_BMP_4 FALSE +// #define GDISP_NEED_IMAGE_BMP_4_RLE FALSE +// #define GDISP_NEED_IMAGE_BMP_8 FALSE +// #define GDISP_NEED_IMAGE_BMP_8_RLE FALSE +// #define GDISP_NEED_IMAGE_BMP_16 FALSE +// #define GDISP_NEED_IMAGE_BMP_24 FALSE +// #define GDISP_NEED_IMAGE_BMP_32 FALSE +// #define GDISP_NEED_IMAGE_JPG FALSE +// #define GDISP_NEED_IMAGE_PNG FALSE +// #define GDISP_NEED_IMAGE_ACCOUNTING FALSE +#ifdef EMULATOR +#define GDISP_NEED_PIXMAP TRUE +#endif +// #define GDISP_NEED_PIXMAP_IMAGE FALSE + +//#define GDISP_DEFAULT_ORIENTATION GDISP_ROTATE_LANDSCAPE // If not defined the native hardware orientation is used. +//#define GDISP_LINEBUF_SIZE 128 +//#define GDISP_STARTUP_COLOR Black +#define GDISP_NEED_STARTUP_LOGO FALSE + +//#define GDISP_TOTAL_DISPLAYS 2 + +#ifndef EMULATOR +#define GDISP_DRIVER_LIST GDISPVMT_ST7565_ERGODOX, GDISPVMT_IS31FL3731C_ERGODOX +#else +#define GDISP_DRIVER_LIST GDISPVMT_EMULATOR_LCD_ERGODOX, GDISPVMT_EMULATOR_LED_ERGODOX +#endif + + #ifdef GDISP_DRIVER_LIST + // For code and speed optimization define as TRUE or FALSE if all controllers have the same capability + #define GDISP_HARDWARE_STREAM_WRITE FALSE + #define GDISP_HARDWARE_STREAM_READ FALSE + #define GDISP_HARDWARE_STREAM_POS FALSE + #define GDISP_HARDWARE_DRAWPIXEL TRUE + #define GDISP_HARDWARE_CLEARS FALSE + #define GDISP_HARDWARE_FILLS FALSE + #define GDISP_HARDWARE_BITFILLS FALSE + #define GDISP_HARDWARE_SCROLL FALSE + #define GDISP_HARDWARE_PIXELREAD TRUE + #define GDISP_HARDWARE_CONTROL TRUE + #define GDISP_HARDWARE_QUERY FALSE + #define GDISP_HARDWARE_CLIP FALSE + + #define GDISP_PIXELFORMAT GDISP_PIXELFORMAT_RGB888 + #endif + +// The custom format is not defined for some reason, so define it as error +// so we don't get compiler warnings +#define GDISP_PIXELFORMAT_CUSTOM GDISP_PIXELFORMAT_ERROR + +#define GDISP_USE_GFXNET FALSE +// #define GDISP_GFXNET_PORT 13001 +// #define GDISP_GFXNET_CUSTOM_LWIP_STARTUP FALSE +// #define GDISP_DONT_WAIT_FOR_NET_DISPLAY FALSE +// #define GDISP_GFXNET_UNSAFE_SOCKETS FALSE + + +/////////////////////////////////////////////////////////////////////////// +// GWIN // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GWIN FALSE + +//#define GWIN_NEED_WINDOWMANAGER FALSE +// #define GWIN_REDRAW_IMMEDIATE FALSE +// #define GWIN_REDRAW_SINGLEOP FALSE +// #define GWIN_NEED_FLASHING FALSE +// #define GWIN_FLASHING_PERIOD 250 + +//#define GWIN_NEED_CONSOLE FALSE +// #define GWIN_CONSOLE_USE_HISTORY FALSE +// #define GWIN_CONSOLE_HISTORY_AVERAGING FALSE +// #define GWIN_CONSOLE_HISTORY_ATCREATE FALSE +// #define GWIN_CONSOLE_ESCSEQ FALSE +// #define GWIN_CONSOLE_USE_BASESTREAM FALSE +// #define GWIN_CONSOLE_USE_FLOAT FALSE +//#define GWIN_NEED_GRAPH FALSE +//#define GWIN_NEED_GL3D FALSE + +//#define GWIN_NEED_WIDGET FALSE +//#define GWIN_FOCUS_HIGHLIGHT_WIDTH 1 +// #define GWIN_NEED_LABEL FALSE +// #define GWIN_LABEL_ATTRIBUTE FALSE +// #define GWIN_NEED_BUTTON FALSE +// #define GWIN_BUTTON_LAZY_RELEASE FALSE +// #define GWIN_NEED_SLIDER FALSE +// #define GWIN_SLIDER_NOSNAP FALSE +// #define GWIN_SLIDER_DEAD_BAND 5 +// #define GWIN_SLIDER_TOGGLE_INC 20 +// #define GWIN_NEED_CHECKBOX FALSE +// #define GWIN_NEED_IMAGE FALSE +// #define GWIN_NEED_IMAGE_ANIMATION FALSE +// #define GWIN_NEED_RADIO FALSE +// #define GWIN_NEED_LIST FALSE +// #define GWIN_NEED_LIST_IMAGES FALSE +// #define GWIN_NEED_PROGRESSBAR FALSE +// #define GWIN_PROGRESSBAR_AUTO FALSE +// #define GWIN_NEED_KEYBOARD FALSE +// #define GWIN_KEYBOARD_DEFAULT_LAYOUT VirtualKeyboard_English1 +// #define GWIN_NEED_KEYBOARD_ENGLISH1 TRUE +// #define GWIN_NEED_TEXTEDIT FALSE +// #define GWIN_FLAT_STYLING FALSE +// #define GWIN_WIDGET_TAGS FALSE + +//#define GWIN_NEED_CONTAINERS FALSE +// #define GWIN_NEED_CONTAINER FALSE +// #define GWIN_NEED_FRAME FALSE +// #define GWIN_NEED_TABSET FALSE +// #define GWIN_TABSET_TABHEIGHT 18 + + +/////////////////////////////////////////////////////////////////////////// +// GEVENT // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GEVENT TRUE + +//#define GEVENT_ASSERT_NO_RESOURCE FALSE +//#define GEVENT_MAXIMUM_SIZE 32 +//#define GEVENT_MAX_SOURCE_LISTENERS 32 + + +/////////////////////////////////////////////////////////////////////////// +// GTIMER // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GTIMER FALSE + +//#define GTIMER_THREAD_PRIORITY HIGH_PRIORITY +//#define GTIMER_THREAD_WORKAREA_SIZE 2048 + + +/////////////////////////////////////////////////////////////////////////// +// GQUEUE // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GQUEUE FALSE + +//#define GQUEUE_NEED_ASYNC FALSE +//#define GQUEUE_NEED_GSYNC FALSE +//#define GQUEUE_NEED_FSYNC FALSE +//#define GQUEUE_NEED_BUFFERS FALSE + +/////////////////////////////////////////////////////////////////////////// +// GINPUT // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GINPUT FALSE + +//#define GINPUT_NEED_MOUSE FALSE +// #define GINPUT_TOUCH_STARTRAW FALSE +// #define GINPUT_TOUCH_NOTOUCH FALSE +// #define GINPUT_TOUCH_NOCALIBRATE FALSE +// #define GINPUT_TOUCH_NOCALIBRATE_GUI FALSE +// #define GINPUT_MOUSE_POLL_PERIOD 25 +// #define GINPUT_MOUSE_CLICK_TIME 300 +// #define GINPUT_TOUCH_CXTCLICK_TIME 700 +// #define GINPUT_TOUCH_USER_CALIBRATION_LOAD FALSE +// #define GINPUT_TOUCH_USER_CALIBRATION_SAVE FALSE +// #define GMOUSE_DRIVER_LIST GMOUSEVMT_Win32, GMOUSEVMT_Win32 +//#define GINPUT_NEED_KEYBOARD FALSE +// #define GINPUT_KEYBOARD_POLL_PERIOD 200 +// #define GKEYBOARD_DRIVER_LIST GKEYBOARDVMT_Win32, GKEYBOARDVMT_Win32 +// #define GKEYBOARD_LAYOUT_OFF FALSE +// #define GKEYBOARD_LAYOUT_SCANCODE2_US FALSE +//#define GINPUT_NEED_TOGGLE FALSE +//#define GINPUT_NEED_DIAL FALSE + + +/////////////////////////////////////////////////////////////////////////// +// GFILE // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GFILE FALSE + +//#define GFILE_NEED_PRINTG FALSE +//#define GFILE_NEED_SCANG FALSE +//#define GFILE_NEED_STRINGS FALSE +//#define GFILE_NEED_FILELISTS FALSE +//#define GFILE_NEED_STDIO FALSE +//#define GFILE_NEED_NOAUTOMOUNT FALSE +//#define GFILE_NEED_NOAUTOSYNC FALSE + +//#define GFILE_NEED_MEMFS FALSE +//#define GFILE_NEED_ROMFS FALSE +//#define GFILE_NEED_RAMFS FALSE +//#define GFILE_NEED_FATFS FALSE +//#define GFILE_NEED_NATIVEFS FALSE +//#define GFILE_NEED_CHBIOSFS FALSE + +//#define GFILE_ALLOW_FLOATS FALSE +//#define GFILE_ALLOW_DEVICESPECIFIC FALSE +//#define GFILE_MAX_GFILES 3 + +/////////////////////////////////////////////////////////////////////////// +// GADC // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GADC FALSE + +//#define GADC_MAX_LOWSPEED_DEVICES 4 + + +/////////////////////////////////////////////////////////////////////////// +// GAUDIO // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GAUDIO FALSE +// There seems to be a bug in the ugfx code, the wrong define is used +// So define it in order to avoid warnings +#define GFX_USE_GAUDIN GFX_USE_GAUDIO +// #define GAUDIO_NEED_PLAY FALSE +// #define GAUDIO_NEED_RECORD FALSE + + +/////////////////////////////////////////////////////////////////////////// +// GMISC // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GMISC TRUE + +//#define GMISC_NEED_ARRAYOPS FALSE +//#define GMISC_NEED_FASTTRIG FALSE +//#define GMISC_NEED_FIXEDTRIG FALSE +//#define GMISC_NEED_INVSQRT FALSE +// #define GMISC_INVSQRT_MIXED_ENDIAN FALSE +// #define GMISC_INVSQRT_REAL_SLOW FALSE +#define GMISC_NEED_MATRIXFLOAT2D TRUE +#define GMISC_NEED_MATRIXFIXED2D FALSE + +#endif /* _GFXCONF_H */ diff --git a/keyboards/infinity_ergodox/halconf.h b/keyboards/infinity_ergodox/halconf.h new file mode 100644 index 000000000..55dd5e88d --- /dev/null +++ b/keyboards/infinity_ergodox/halconf.h @@ -0,0 +1,353 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C TRUE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL TRUE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB TRUE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI TRUE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* ADC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__) +#define ADC_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define ADC_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* CAN driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Sleep mode related APIs inclusion switch. + */ +#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__) +#define CAN_USE_SLEEP_MODE TRUE +#endif + +/*===========================================================================*/ +/* I2C driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables the mutual exclusion APIs on the I2C bus. + */ +#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define I2C_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* MAC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__) +#define MAC_USE_ZERO_COPY FALSE +#endif + +/** + * @brief Enables an event sources for incoming packets. + */ +#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__) +#define MAC_USE_EVENTS TRUE +#endif + +/*===========================================================================*/ +/* MMC_SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + * This option is recommended also if the SPI driver does not + * use a DMA channel and heavily loads the CPU. + */ +#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__) +#define MMC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SDC driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Number of initialization attempts before rejecting the card. + * @note Attempts are performed at 10mS intervals. + */ +#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__) +#define SDC_INIT_RETRY 100 +#endif + +/** + * @brief Include support for MMC cards. + * @note MMC support is not yet implemented so this option must be kept + * at @p FALSE. + */ +#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__) +#define SDC_MMC_SUPPORT FALSE +#endif + +/** + * @brief Delays insertions. + * @details If enabled this options inserts delays into the MMC waiting + * routines releasing some extra CPU time for the threads with + * lower priority, this may slow down the driver a bit however. + */ +#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__) +#define SDC_NICE_WAITING TRUE +#endif + +/*===========================================================================*/ +/* SERIAL driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Default bit rate. + * @details Configuration parameter, this is the baud rate selected for the + * default configuration. + */ +#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__) +#define SERIAL_DEFAULT_BITRATE 38400 +#endif + +/** + * @brief Serial buffers size. + * @details Configuration parameter, you can change the depth of the queue + * buffers depending on the requirements of your application. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_BUFFERS_SIZE 128 +#endif + +/*===========================================================================*/ +/* SERIAL_USB driver related setting. */ +/*===========================================================================*/ + +/** + * @brief Serial over USB buffers size. + * @details Configuration parameter, the buffer size must be a multiple of + * the USB data endpoint maximum packet size. + * @note The default is 64 bytes for both the transmission and receive + * buffers. + */ +#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__) +#define SERIAL_USB_BUFFERS_SIZE 256 +#endif + +/*===========================================================================*/ +/* SPI driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__) +#define SPI_USE_WAIT TRUE +#endif + +/** + * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__) +#define SPI_USE_MUTUAL_EXCLUSION TRUE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/keyboards/infinity_ergodox/infinity_ergodox.c b/keyboards/infinity_ergodox/infinity_ergodox.c new file mode 100644 index 000000000..87ed40fab --- /dev/null +++ b/keyboards/infinity_ergodox/infinity_ergodox.c @@ -0,0 +1,76 @@ +#include "infinity_ergodox.h" +#include "ch.h" +#include "hal.h" +#include "serial_link/system/serial_link.h" +#include "lcd_backlight.h" + +void init_serial_link_hal(void) { + PORTA->PCR[1] = PORTx_PCRn_PE | PORTx_PCRn_PS | PORTx_PCRn_PFE | PORTx_PCRn_MUX(2); + PORTA->PCR[2] = PORTx_PCRn_DSE | PORTx_PCRn_SRE | PORTx_PCRn_MUX(2); + PORTE->PCR[0] = PORTx_PCRn_PE | PORTx_PCRn_PS | PORTx_PCRn_PFE | PORTx_PCRn_MUX(3); + PORTE->PCR[1] = PORTx_PCRn_DSE | PORTx_PCRn_SRE | PORTx_PCRn_MUX(3); +} + +#define RED_PIN 1 +#define GREEN_PIN 2 +#define BLUE_PIN 3 +#define CHANNEL_RED FTM0->CHANNEL[0] +#define CHANNEL_GREEN FTM0->CHANNEL[1] +#define CHANNEL_BLUE FTM0->CHANNEL[2] + +#define RGB_PORT PORTC +#define RGB_PORT_GPIO GPIOC + +// Base FTM clock selection (72 MHz system clock) +// @ 0xFFFF period, 72 MHz / (0xFFFF * 2) = Actual period +// Higher pre-scalar will use the most power (also look the best) +// Pre-scalar calculations +// 0 - 72 MHz -> 549 Hz +// 1 - 36 MHz -> 275 Hz +// 2 - 18 MHz -> 137 Hz +// 3 - 9 MHz -> 69 Hz (Slightly visible flicker) +// 4 - 4 500 kHz -> 34 Hz (Visible flickering) +// 5 - 2 250 kHz -> 17 Hz +// 6 - 1 125 kHz -> 9 Hz +// 7 - 562 500 Hz -> 4 Hz +// Using a higher pre-scalar without flicker is possible but FTM0_MOD will need to be reduced +// Which will reduce the brightness range +#define PRESCALAR_DEFINE 0 + +void lcd_backlight_hal_init(void) { + // Setup Backlight + SIM->SCGC6 |= SIM_SCGC6_FTM0; + FTM0->CNT = 0; // Reset counter + + // PWM Period + // 16-bit maximum + FTM0->MOD = 0xFFFF; + + // Set FTM to PWM output - Edge Aligned, Low-true pulses +#define CNSC_MODE FTM_SC_CPWMS | FTM_SC_PS(4) | FTM_SC_CLKS(0) + CHANNEL_RED.CnSC = CNSC_MODE; + CHANNEL_GREEN.CnSC = CNSC_MODE; + CHANNEL_BLUE.CnSC = CNSC_MODE; + + // System clock, /w prescalar setting + FTM0->SC = FTM_SC_CLKS(1) | FTM_SC_PS(PRESCALAR_DEFINE); + + CHANNEL_RED.CnV = 0; + CHANNEL_GREEN.CnV = 0; + CHANNEL_BLUE.CnV = 0; + + RGB_PORT_GPIO->PDDR |= (1 << RED_PIN); + RGB_PORT_GPIO->PDDR |= (1 << GREEN_PIN); + RGB_PORT_GPIO->PDDR |= (1 << BLUE_PIN); + +#define RGB_MODE PORTx_PCRn_SRE | PORTx_PCRn_DSE | PORTx_PCRn_MUX(4) + RGB_PORT->PCR[RED_PIN] = RGB_MODE; + RGB_PORT->PCR[GREEN_PIN] = RGB_MODE; + RGB_PORT->PCR[BLUE_PIN] = RGB_MODE; +} + +void lcd_backlight_hal_color(uint16_t r, uint16_t g, uint16_t b) { + CHANNEL_RED.CnV = r; + CHANNEL_GREEN.CnV = g; + CHANNEL_BLUE.CnV = b; +} diff --git a/keyboards/infinity_ergodox/infinity_ergodox.h b/keyboards/infinity_ergodox/infinity_ergodox.h new file mode 100644 index 000000000..de7267594 --- /dev/null +++ b/keyboards/infinity_ergodox/infinity_ergodox.h @@ -0,0 +1,44 @@ +#ifndef KEYBOARDS_INFINITY_ERGODOX_INFINITY_ERGODOX_H_ +#define KEYBOARDS_INFINITY_ERGODOX_INFINITY_ERGODOX_H_ + +#include "quantum.h" + +#define KEYMAP( \ + A80, A70, A60, A50, A40, A30, A20, \ + A81, A71, A61, A51, A41, A31, A21, \ + A82, A72, A62, A52, A42, A32, \ + A83, A73, A63, A53, A43, A33, A23, \ + A84, A74, A64, A54, A44, \ + A13, A03, \ + A04, \ + A34, A24, A14, \ + B20, B30, B40, B50, B60, B70, B80, \ + B21, B31, B41, B51, B61, B71, B81, \ + B32, B42, B52, B62, B72, B82, \ + B23, B33, B43, B53, B63, B73, B83, \ + B44, B54, B64, B74, B84, \ + B03, B13, \ + B04, \ + B14, B24, B34 \ +) { \ + { KC_NO, KC_NO, KC_NO, KC_##A03, KC_##A04 }, \ + { KC_NO, KC_NO, KC_NO, KC_##A13, KC_##A14 }, \ + { KC_##A20, KC_##A21, KC_NO, KC_##A23, KC_##A24 }, \ + { KC_##A30, KC_##A31, KC_##A32, KC_##A33, KC_##A34 }, \ + { KC_##A40, KC_##A41, KC_##A42, KC_##A43, KC_##A44 }, \ + { KC_##A50, KC_##A51, KC_##A52, KC_##A53, KC_##A54 }, \ + { KC_##A60, KC_##A61, KC_##A62, KC_##A63, KC_##A64 }, \ + { KC_##A70, KC_##A71, KC_##A72, KC_##A73, KC_##A74 }, \ + { KC_##A80, KC_##A81, KC_##A82, KC_##A83, KC_##A84 }, \ + { KC_NO, KC_NO, KC_NO, KC_##B03, KC_##B04 }, \ + { KC_NO, KC_NO, KC_NO, KC_##B13, KC_##B14 }, \ + { KC_##B20, KC_##B21, KC_NO, KC_##B23, KC_##B24 }, \ + { KC_##B30, KC_##B31, KC_##B32, KC_##B33, KC_##B34 }, \ + { KC_##B40, KC_##B41, KC_##B42, KC_##B43, KC_##B44 }, \ + { KC_##B50, KC_##B51, KC_##B52, KC_##B53, KC_##B54 }, \ + { KC_##B60, KC_##B61, KC_##B62, KC_##B63, KC_##B64 }, \ + { KC_##B70, KC_##B71, KC_##B72, KC_##B73, KC_##B74 }, \ + { KC_##B80, KC_##B81, KC_##B82, KC_##B83, KC_##B84 } \ +} + +#endif /* KEYBOARDS_INFINITY_ERGODOX_INFINITY_ERGODOX_H_ */ diff --git a/keyboards/infinity_ergodox/keymaps/default/keymap.c b/keyboards/infinity_ergodox/keymaps/default/keymap.c new file mode 100644 index 000000000..c33fb7b92 --- /dev/null +++ b/keyboards/infinity_ergodox/keymaps/default/keymap.c @@ -0,0 +1,111 @@ +/* +Copyright 2016 Fred Sundvik +Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "infinity_ergodox.h" + +const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + KEYMAP( // layer 0 : default + // left hand + EQL, 1, 2, 3, 4, 5, ESC, + BSLS,Q, W, E, R, T, FN1, + TAB, A, S, D, F, G, + LSFT,Z, X, C, V, B, FN0, + LGUI,GRV, BSLS,LEFT,RGHT, + LCTL,LALT, + HOME, + BSPC,DEL, END, + // right hand + FN2, 6, 7, 8, 9, 0, MINS, + LBRC,Y, U, I, O, P, RBRC, + H, J, K, L, SCLN,QUOT, + FN0, N, M, COMM,DOT, SLSH,RSFT, + LEFT,DOWN,UP, RGHT,RGUI, + RALT,RCTL, + PGUP, + PGDN,ENT, SPC + ), + + KEYMAP( // layer 1 : function and symbol keys + // left hand + TRNS,F1, F2, F3, F4, F5, F11, + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,FN3, + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, + TRNS,TRNS,TRNS,TRNS,TRNS, + TRNS,TRNS, + TRNS, + TRNS,TRNS,TRNS, + // right hand + F12, F6, F7, F8, F9, F10, TRNS, + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, + TRNS,TRNS,TRNS,TRNS,TRNS, + TRNS,TRNS, + TRNS, + TRNS,TRNS,TRNS + ), + + KEYMAP( // layer 2 : keyboard functions + // left hand + BTLD,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, FN3, + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, + TRNS,TRNS,TRNS,TRNS,TRNS, + TRNS,TRNS, + TRNS, + TRNS,TRNS,TRNS, + // right hand + TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, + TRNS,TRNS,TRNS,TRNS,TRNS, + TRNS,TRNS, + TRNS, + TRNS,TRNS,TRNS + ), + + KEYMAP( // layer 3: numpad + // left hand + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, + TRNS,TRNS,TRNS,TRNS,TRNS, + TRNS,TRNS, + TRNS, + TRNS,TRNS,TRNS, + // right hand + TRNS,NLCK,PSLS,PAST,PAST,PMNS,BSPC, + TRNS,NO, P7, P8, P9, PMNS,BSPC, + NO, P4, P5, P6, PPLS,PENT, + TRNS,NO, P1, P2, P3, PPLS,PENT, + P0, PDOT,SLSH,PENT,PENT, + TRNS,TRNS, + TRNS, + TRNS,TRNS,TRNS + ), +}; +const uint16_t fn_actions[] = { + ACTION_LAYER_MOMENTARY(1), // FN0 - switch to Layer1 + ACTION_LAYER_SET(2, ON_PRESS), // FN1 - set Layer2 + ACTION_LAYER_TOGGLE(3), // FN2 - toggle Layer3 aka Numpad layer + ACTION_LAYER_SET(0, ON_PRESS), // FN3 - set Layer0 +}; diff --git a/keyboards/infinity_ergodox/keymaps/default/visualizer.c b/keyboards/infinity_ergodox/keymaps/default/visualizer.c new file mode 100644 index 000000000..c0d335ce6 --- /dev/null +++ b/keyboards/infinity_ergodox/keymaps/default/visualizer.c @@ -0,0 +1,168 @@ +/* +Copyright 2016 Fred Sundvik + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +// Currently we are assuming that both the backlight and LCD are enabled +// But it's entirely possible to write a custom visualizer that use only +// one of them +#ifndef LCD_BACKLIGHT_ENABLE +#error This visualizer needs that LCD backlight is enabled +#endif + +#ifndef LCD_ENABLE +#error This visualizer needs that LCD is enabled +#endif + +#include "visualizer.h" +#include "led_test.h" + +static const char* welcome_text[] = {"TMK", "Infinity Ergodox"}; + +// Just an example how to write custom keyframe functions, we could have moved +// all this into the init function +bool display_welcome(keyframe_animation_t* animation, visualizer_state_t* state) { + (void)animation; + // Read the uGFX documentation for information how to use the displays + // http://wiki.ugfx.org/index.php/Main_Page + gdispClear(White); + // You can use static variables for things that can't be found in the animation + // or state structs + gdispDrawString(0, 3, welcome_text[0], state->font_dejavusansbold12, Black); + gdispDrawString(0, 15, welcome_text[1], state->font_dejavusansbold12, Black); + // Always remember to flush the display + gdispFlush(); + // you could set the backlight color as well, but we won't do it here, since + // it's part of the following animation + // lcd_backlight_color(hue, saturation, intensity); + // We don't need constant updates, just drawing the screen once is enough + return false; +} + +// Feel free to modify the animations below, or even add new ones if needed + +// Don't worry, if the startup animation is long, you can use the keyboard like normal +// during that time +static keyframe_animation_t startup_animation = { + .num_frames = 4, + .loop = false, + .frame_lengths = {0, gfxMillisecondsToTicks(1000), gfxMillisecondsToTicks(5000), 0}, + .frame_functions = { + display_welcome, + keyframe_animate_backlight_color, + keyframe_no_operation, + enable_visualization + }, +}; + +// The color animation animates the LCD color when you change layers +static keyframe_animation_t color_animation = { + .num_frames = 2, + .loop = false, + // Note that there's a 200 ms no-operation frame, + // this prevents the color from changing when activating the layer + // momentarily + .frame_lengths = {gfxMillisecondsToTicks(200), gfxMillisecondsToTicks(500)}, + .frame_functions = {keyframe_no_operation, keyframe_animate_backlight_color}, +}; + +// The LCD animation alternates between the layer name display and a +// bitmap that displays all active layers +static keyframe_animation_t lcd_animation = { + .num_frames = 2, + .loop = true, + .frame_lengths = {gfxMillisecondsToTicks(2000), gfxMillisecondsToTicks(2000)}, + .frame_functions = {keyframe_display_layer_text, keyframe_display_layer_bitmap}, +}; + +static keyframe_animation_t suspend_animation = { + .num_frames = 3, + .loop = false, + .frame_lengths = {0, gfxMillisecondsToTicks(1000), 0}, + .frame_functions = { + keyframe_display_layer_text, + keyframe_animate_backlight_color, + keyframe_disable_lcd_and_backlight, + }, +}; + +static keyframe_animation_t resume_animation = { + .num_frames = 5, + .loop = false, + .frame_lengths = {0, 0, gfxMillisecondsToTicks(1000), gfxMillisecondsToTicks(5000), 0}, + .frame_functions = { + keyframe_enable_lcd_and_backlight, + display_welcome, + keyframe_animate_backlight_color, + keyframe_no_operation, + enable_visualization, + }, +}; + +void initialize_user_visualizer(visualizer_state_t* state) { + // The brightness will be dynamically adjustable in the future + // But for now, change it here. + lcd_backlight_brightness(0x50); + state->current_lcd_color = LCD_COLOR(0x00, 0x00, 0xFF); + state->target_lcd_color = LCD_COLOR(0x10, 0xFF, 0xFF); + start_keyframe_animation(&startup_animation); + start_keyframe_animation(&led_test_animation); +} + +void update_user_visualizer_state(visualizer_state_t* state) { + // Add more tests, change the colors and layer texts here + // Usually you want to check the high bits (higher layers first) + // because that's the order layers are processed for keypresses + // You can for check for example: + // state->status.layer + // state->status.default_layer + // state->status.leds (see led.h for available statuses) + if (state->status.layer & 0x8) { + state->target_lcd_color = LCD_COLOR(0xC0, 0xB0, 0xFF); + state->layer_text = "Numpad"; + } + else if (state->status.layer & 0x4) { + state->target_lcd_color = LCD_COLOR(0, 0xB0, 0xFF); + state->layer_text = "KBD functions"; + } + else if (state->status.layer & 0x2) { + state->target_lcd_color = LCD_COLOR(0x80, 0xB0, 0xFF); + state->layer_text = "Function keys"; + } + else { + state->target_lcd_color = LCD_COLOR(0x40, 0xB0, 0xFF); + state->layer_text = "Default"; + } + // You can also stop existing animations, and start your custom ones here + // remember that you should normally have only one animation for the LCD + // and one for the background. But you can also combine them if you want. + start_keyframe_animation(&lcd_animation); + start_keyframe_animation(&color_animation); +} + +void user_visualizer_suspend(visualizer_state_t* state) { + state->layer_text = "Suspending..."; + uint8_t hue = LCD_HUE(state->current_lcd_color); + uint8_t sat = LCD_SAT(state->current_lcd_color); + state->target_lcd_color = LCD_COLOR(hue, sat, 0); + start_keyframe_animation(&suspend_animation); +} + +void user_visualizer_resume(visualizer_state_t* state) { + state->current_lcd_color = LCD_COLOR(0x00, 0x00, 0x00); + state->target_lcd_color = LCD_COLOR(0x10, 0xFF, 0xFF); + start_keyframe_animation(&resume_animation); + start_keyframe_animation(&led_test_animation); +} diff --git a/keyboards/infinity_ergodox/led.c b/keyboards/infinity_ergodox/led.c new file mode 100644 index 000000000..77195bb35 --- /dev/null +++ b/keyboards/infinity_ergodox/led.c @@ -0,0 +1,49 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "hal.h" + +#include "led.h" + + +void led_set(uint8_t usb_led) { +// The LCD backlight functionality conflicts with this simple +// red backlight +#if !defined(LCD_BACKLIGHT_ENABLE) && defined(STATUS_LED_ENABLE) + // PTC1: LCD Backlight Red(0:on/1:off) + GPIOC->PDDR |= (1<<1); + PORTC->PCR[1] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1); + if (usb_led & (1<PCOR |= (1<<1); + } else { + GPIOC->PSOR |= (1<<1); + } +#elif !defined(LCD_BACKLIGHT_ENABLE) + (void)usb_led; + GPIOC->PDDR |= (1<<1); + PORTC->PCR[1] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1); + GPIOC->PSOR |= (1<<1); + GPIOC->PDDR |= (1<<2); + PORTC->PCR[2] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1); + GPIOC->PSOR |= (1<<2); + GPIOC->PDDR |= (1<<3); + PORTC->PCR[3] |= PORTx_PCRn_DSE | PORTx_PCRn_MUX(1); + GPIOC->PSOR |= (1<<3); +#else + (void)usb_led; +#endif +} diff --git a/keyboards/infinity_ergodox/matrix.c b/keyboards/infinity_ergodox/matrix.c new file mode 100644 index 000000000..2b806cd64 --- /dev/null +++ b/keyboards/infinity_ergodox/matrix.c @@ -0,0 +1,169 @@ +/* +Copyright 2016 Fred Sundvik +Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include +#include +#include +#include "hal.h" +#include "timer.h" +#include "wait.h" +#include "print.h" +#include "debug.h" +#include "matrix.h" + + +/* + * Infinity ErgoDox Pinusage: + * Column pins are input with internal pull-down. Row pins are output and strobe with high. + * Key is high or 1 when it turns on. + * + * col: { PTD1, PTD4, PTD5, PTD6, PTD7 } + * row: { PTB2, PTB3, PTB18, PTB19, PTC0, PTC9, PTC10, PTC11, PTD0 } + */ +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[LOCAL_MATRIX_ROWS]; +static bool debouncing = false; +static uint16_t debouncing_time = 0; + + +void matrix_init(void) +{ + /* Column(sense) */ + palSetPadMode(GPIOD, 1, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOD, 4, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOD, 5, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOD, 6, PAL_MODE_INPUT_PULLDOWN); + palSetPadMode(GPIOD, 7, PAL_MODE_INPUT_PULLDOWN); + + /* Row(strobe) */ + palSetPadMode(GPIOB, 2, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 3, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 18, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 19, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOC, 0, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOC, 9, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOC, 10, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOC, 11, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOD, 0, PAL_MODE_OUTPUT_PUSHPULL); + + memset(matrix, 0, MATRIX_ROWS); + memset(matrix_debouncing, 0, LOCAL_MATRIX_ROWS); +} + +uint8_t matrix_scan(void) +{ + for (int row = 0; row < LOCAL_MATRIX_ROWS; row++) { + matrix_row_t data = 0; + + // strobe row + switch (row) { + case 0: palSetPad(GPIOB, 2); break; + case 1: palSetPad(GPIOB, 3); break; + case 2: palSetPad(GPIOB, 18); break; + case 3: palSetPad(GPIOB, 19); break; + case 4: palSetPad(GPIOC, 0); break; + case 5: palSetPad(GPIOC, 9); break; + case 6: palSetPad(GPIOC, 10); break; + case 7: palSetPad(GPIOC, 11); break; + case 8: palSetPad(GPIOD, 0); break; + } + + // need wait to settle pin state + // if you wait too short, or have a too high update rate + // the keyboard might freeze, or there might not be enough + // processing power to update the LCD screen properly. + // 20us, or two ticks at 100000Hz seems to be OK + wait_us(20); + + // read col data: { PTD1, PTD4, PTD5, PTD6, PTD7 } + data = ((palReadPort(GPIOD) & 0xF0) >> 3) | + ((palReadPort(GPIOD) & 0x02) >> 1); + + // un-strobe row + switch (row) { + case 0: palClearPad(GPIOB, 2); break; + case 1: palClearPad(GPIOB, 3); break; + case 2: palClearPad(GPIOB, 18); break; + case 3: palClearPad(GPIOB, 19); break; + case 4: palClearPad(GPIOC, 0); break; + case 5: palClearPad(GPIOC, 9); break; + case 6: palClearPad(GPIOC, 10); break; + case 7: palClearPad(GPIOC, 11); break; + case 8: palClearPad(GPIOD, 0); break; + } + + if (matrix_debouncing[row] != data) { + matrix_debouncing[row] = data; + debouncing = true; + debouncing_time = timer_read(); + } + } + + uint8_t offset = 0; +#ifdef MASTER_IS_ON_RIGHT + if (is_serial_link_master()) { + offset = MATRIX_ROWS - LOCAL_MATRIX_ROWS; + } +#endif + + if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCE) { + for (int row = 0; row < LOCAL_MATRIX_ROWS; row++) { + matrix[offset + row] = matrix_debouncing[row]; + } + debouncing = false; + } + return 1; +} + +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & (1< +Copyright 2012 Jun Wako This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -22,26 +22,41 @@ along with this program. If not, see . /* USB Device descriptor parameter */ #define VENDOR_ID 0xFEED -#define PRODUCT_ID 0x6464 +#define PRODUCT_ID 0x3060 #define DEVICE_VER 0x0001 -/* in python2: list(u"whatever".encode('utf-16-le')) */ -/* at most 32 characters or the ugly hack in usb_main.c borks */ -#define MANUFACTURER "TMK" -#define USBSTR_MANUFACTURER 'T', '\x00', 'M', '\x00', 'K', '\x00', ' ', '\x00', '\xc6', '\x00' -#define PRODUCT "ChibiOS TMK test" -#define USBSTR_PRODUCT 'C', '\x00', 'h', '\x00', 'i', '\x00', 'b', '\x00', 'i', '\x00', 'O', '\x00', 'S', '\x00', ' ', '\x00', 'T', '\x00', 'M', '\x00', 'K', '\x00', ' ', '\x00', 't', '\x00', 'e', '\x00', 's', '\x00', 't', '\x00' -#define DESCRIPTION "TMK keyboard firmware over ChibiOS" +#define MANUFACTURER Wootpatoot +#define PRODUCT Lets Split +#define DESCRIPTION A split keyboard for the cheap makers /* key matrix size */ -#define MATRIX_ROWS 1 -#define MATRIX_COLS 1 +// Rows are doubled-up +#define MATRIX_ROWS 8 +#define MATRIX_COLS 6 + +// wiring of each half +#define MATRIX_ROW_PINS { B5, B4, E6, D7 } +#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3 } + +#define CATERINA_BOOTLOADER + +// #define USE_I2C + +// #define EE_HANDS + +#define I2C_MASTER_LEFT +// #define I2C_MASTER_RIGHT + +/* COL2ROW or ROW2COL */ #define DIODE_DIRECTION COL2ROW /* define if matrix has ghost */ //#define MATRIX_HAS_GHOST +/* number of backlight levels */ +// #define BACKLIGHT_LEVELS 3 + /* Set 0 if debouncing isn't needed */ -#define DEBOUNCE 5 +#define DEBOUNCING_DELAY 5 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ #define LOCKING_SUPPORT_ENABLE @@ -53,7 +68,14 @@ along with this program. If not, see . keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ ) - +/* ws2812 RGB LED */ +#define ws2812_PORTREG PORTD +#define ws2812_DDRREG DDRD +#define ws2812_pin PD1 +#define RGBLED_NUM 28 // Number of LEDs +#define RGBLIGHT_HUE_STEP 10 +#define RGBLIGHT_SAT_STEP 17 +#define RGBLIGHT_VAL_STEP 17 /* * Feature disable options @@ -61,10 +83,10 @@ along with this program. If not, see . */ /* disable debug print */ -//#define NO_DEBUG +// #define NO_DEBUG /* disable print */ -//#define NO_PRINT +// #define NO_PRINT /* disable action features */ //#define NO_ACTION_LAYER @@ -73,4 +95,4 @@ along with this program. If not, see . //#define NO_ACTION_MACRO //#define NO_ACTION_FUNCTION -#endif +#endif \ No newline at end of file diff --git a/keyboards/lets_split/eeprom-lefthand.eep b/keyboards/lets_split/eeprom-lefthand.eep new file mode 100644 index 000000000..a92200b12 --- /dev/null +++ b/keyboards/lets_split/eeprom-lefthand.eep @@ -0,0 +1,2 @@ +:080000000000000000000001F7 +:00000001FF diff --git a/keyboards/lets_split/eeprom-righthand.eep b/keyboards/lets_split/eeprom-righthand.eep new file mode 100644 index 000000000..91a683170 --- /dev/null +++ b/keyboards/lets_split/eeprom-righthand.eep @@ -0,0 +1,2 @@ +:080000000000000000000000F8 +:00000001FF diff --git a/keyboards/lets_split/i2c.c b/keyboards/lets_split/i2c.c new file mode 100644 index 000000000..c72789403 --- /dev/null +++ b/keyboards/lets_split/i2c.c @@ -0,0 +1,159 @@ +#include +#include +#include +#include +#include +#include +#include "i2c.h" + +// Limits the amount of we wait for any one i2c transaction. +// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is +// 9 bits, a single transaction will take around 90μs to complete. +// +// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit +// poll loop takes at least 8 clock cycles to execute +#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8 + +#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE) + +volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; + +static volatile uint8_t slave_buffer_pos; +static volatile bool slave_has_register_set = false; + +// Wait for an i2c operation to finish +inline static +void i2c_delay(void) { + uint16_t lim = 0; + while(!(TWCR & (1<10. + // Check datasheets for more info. + TWBR = ((F_CPU/SCL_CLOCK)-16)/2; +} + +// Start a transaction with the given i2c slave address. The direction of the +// transfer is set with I2C_READ and I2C_WRITE. +// returns: 0 => success +// 1 => error +uint8_t i2c_master_start(uint8_t address) { + TWCR = (1< slave ACK +// 1 => slave NACK +uint8_t i2c_master_write(uint8_t data) { + TWDR = data; + TWCR = (1<= SLAVE_BUFFER_SIZE ) { + ack = 0; + slave_buffer_pos = 0; + } + slave_has_register_set = true; + } else { + i2c_slave_buffer[slave_buffer_pos] = TWDR; + BUFFER_POS_INC(); + } + break; + + case TW_ST_SLA_ACK: + case TW_ST_DATA_ACK: + // master has addressed this device as a slave transmitter and is + // requesting data. + TWDR = i2c_slave_buffer[slave_buffer_pos]; + BUFFER_POS_INC(); + break; + + case TW_BUS_ERROR: // something went wrong, reset twi state + TWCR = 0; + default: + break; + } + // Reset everything, so we are ready for the next TWI interrupt + TWCR |= (1< + +#ifndef F_CPU +#define F_CPU 16000000UL +#endif + +#define I2C_READ 1 +#define I2C_WRITE 0 + +#define I2C_ACK 1 +#define I2C_NACK 0 + +#define SLAVE_BUFFER_SIZE 0x10 + +// i2c SCL clock frequency +#define SCL_CLOCK 100000L + +extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE]; + +void i2c_master_init(void); +uint8_t i2c_master_start(uint8_t address); +void i2c_master_stop(void); +uint8_t i2c_master_write(uint8_t data); +uint8_t i2c_master_read(int); +void i2c_reset_state(void); +void i2c_slave_init(uint8_t address); + +#endif diff --git a/keyboards/lets_split/imgs/split-keyboard-i2c-schematic.png b/keyboards/lets_split/imgs/split-keyboard-i2c-schematic.png new file mode 100644 index 000000000..888294718 Binary files /dev/null and b/keyboards/lets_split/imgs/split-keyboard-i2c-schematic.png differ diff --git a/keyboards/lets_split/imgs/split-keyboard-serial-schematic.png b/keyboards/lets_split/imgs/split-keyboard-serial-schematic.png new file mode 100644 index 000000000..7621d38ed Binary files /dev/null and b/keyboards/lets_split/imgs/split-keyboard-serial-schematic.png differ diff --git a/keyboards/lets_split/keymaps/default/keymap.c b/keyboards/lets_split/keymaps/default/keymap.c new file mode 100644 index 000000000..0d2d94b67 --- /dev/null +++ b/keyboards/lets_split/keymaps/default/keymap.c @@ -0,0 +1,214 @@ +#include "lets_split.h" +#include "action_layer.h" +#include "eeconfig.h" + +extern keymap_config_t keymap_config; + +// Each layer gets a name for readability, which is then used in the keymap matrix below. +// The underscores don't mean anything - you can have a layer called STUFF or any other name. +// Layer names don't all need to be of the same length, obviously, and you can also skip them +// entirely and just use numbers. +#define _QWERTY 0 +#define _COLEMAK 1 +#define _DVORAK 2 +#define _LOWER 3 +#define _RAISE 4 +#define _ADJUST 16 + +enum custom_keycodes { + QWERTY = SAFE_RANGE, + COLEMAK, + DVORAK, + LOWER, + RAISE, + ADJUST, +}; + +// Fillers to make layering more clear +#define _______ KC_TRNS +#define XXXXXXX KC_NO + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + +/* Qwerty + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | E | R | T | Y | U | I | O | P | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | S | D | F | G | H | J | K | L | ; | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | N | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_QWERTY] = KEYMAP( \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC, \ + KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ + ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ +), + +/* Colemak + * ,-----------------------------------------------------------------------------------. + * | Tab | Q | W | F | P | G | J | L | U | Y | ; | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | R | S | T | D | H | N | E | I | O | " | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| Z | X | C | V | B | K | M | , | . | / |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_COLEMAK] = KEYMAP( \ + KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_BSPC, \ + KC_ESC, KC_A, KC_R, KC_S, KC_T, KC_D, KC_H, KC_N, KC_E, KC_I, KC_O, KC_QUOT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_K, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT , \ + ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ +), + +/* Dvorak + * ,-----------------------------------------------------------------------------------. + * | Tab | " | , | . | P | Y | F | G | C | R | L | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Esc | A | O | E | U | I | D | H | T | N | S | / | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | Shift| ; | Q | J | K | X | B | M | W | V | Z |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * |Adjust| Ctrl | Alt | GUI |Lower |Space |Space |Raise | Left | Down | Up |Right | + * `-----------------------------------------------------------------------------------' + */ +[_DVORAK] = KEYMAP( \ + KC_TAB, KC_QUOT, KC_COMM, KC_DOT, KC_P, KC_Y, KC_F, KC_G, KC_C, KC_R, KC_L, KC_BSPC, \ + KC_ESC, KC_A, KC_O, KC_E, KC_U, KC_I, KC_D, KC_H, KC_T, KC_N, KC_S, KC_SLSH, \ + KC_LSFT, KC_SCLN, KC_Q, KC_J, KC_K, KC_X, KC_B, KC_M, KC_W, KC_V, KC_Z, KC_ENT , \ + ADJUST, KC_LCTL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT \ +), + +/* Lower + * ,-----------------------------------------------------------------------------------. + * | ~ | ! | @ | # | $ | % | ^ | & | * | ( | ) | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | | \ | | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_LOWER] = KEYMAP( \ + KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC, \ + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),_______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ +), + +/* Raise + * ,-----------------------------------------------------------------------------------. + * | ` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | Bksp | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | |Enter | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | Next | Vol- | Vol+ | Play | + * `-----------------------------------------------------------------------------------' + */ +[_RAISE] = KEYMAP( \ + KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC, \ + KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, \ + _______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY \ +), + +/* Adjust (Lower + Raise) + * ,-----------------------------------------------------------------------------------. + * | | Reset| | | | | | | | | | Del | + * |------+------+------+------+------+-------------+------+------+------+------+------| + * | | | |Aud on|Audoff|AGnorm|AGswap|Qwerty|Colemk|Dvorak| | | + * |------+------+------+------+------+------|------+------+------+------+------+------| + * | | | | | | | | | | | | | + * |------+------+------+------+------+------+------+------+------+------+------+------| + * | | | | | | | | | | | | + * `-----------------------------------------------------------------------------------' + */ +[_ADJUST] = KEYMAP( \ + _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL, \ + _______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \ + _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \ +) + + +}; + +#ifdef AUDIO_ENABLE +float tone_qwerty[][2] = SONG(QWERTY_SOUND); +float tone_dvorak[][2] = SONG(DVORAK_SOUND); +float tone_colemak[][2] = SONG(COLEMAK_SOUND); +#endif + +void persistant_default_layer_set(uint16_t default_layer) { + eeconfig_update_default_layer(default_layer); + default_layer_set(default_layer); +} + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case QWERTY: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_qwerty, false, 0); + #endif + persistant_default_layer_set(1UL<<_QWERTY); + } + return false; + break; + case COLEMAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_colemak, false, 0); + #endif + persistant_default_layer_set(1UL<<_COLEMAK); + } + return false; + break; + case DVORAK: + if (record->event.pressed) { + #ifdef AUDIO_ENABLE + PLAY_NOTE_ARRAY(tone_dvorak, false, 0); + #endif + persistant_default_layer_set(1UL<<_DVORAK); + } + return false; + break; + case LOWER: + if (record->event.pressed) { + layer_on(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_LOWER); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case RAISE: + if (record->event.pressed) { + layer_on(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } else { + layer_off(_RAISE); + update_tri_layer(_LOWER, _RAISE, _ADJUST); + } + return false; + break; + case ADJUST: + if (record->event.pressed) { + layer_on(_ADJUST); + } else { + layer_off(_ADJUST); + } + return false; + break; + } + return true; +} \ No newline at end of file diff --git a/keyboards/lets_split/lets_split.c b/keyboards/lets_split/lets_split.c new file mode 100644 index 000000000..574c116a7 --- /dev/null +++ b/keyboards/lets_split/lets_split.c @@ -0,0 +1,30 @@ +#include "lets_split.h" + +#ifdef AUDIO_ENABLE + float tone_startup[][2] = SONG(STARTUP_SOUND); + float tone_goodbye[][2] = SONG(GOODBYE_SOUND); +#endif + +void matrix_init_kb(void) { + + #ifdef AUDIO_ENABLE + _delay_ms(20); // gets rid of tick + PLAY_NOTE_ARRAY(tone_startup, false, 0); + #endif + + // // green led on + // DDRD |= (1<<5); + // PORTD &= ~(1<<5); + + // // orange led on + // DDRB |= (1<<0); + // PORTB &= ~(1<<0); + + matrix_init_user(); +}; + +void shutdown_user(void) { + PLAY_NOTE_ARRAY(tone_goodbye, false, 0); + _delay_ms(150); + stop_all_notes(); +} diff --git a/keyboards/lets_split/lets_split.h b/keyboards/lets_split/lets_split.h new file mode 100644 index 000000000..fe7ae0767 --- /dev/null +++ b/keyboards/lets_split/lets_split.h @@ -0,0 +1,25 @@ +#ifndef LETS_SPLIT_H +#define LETS_SPLIT_H + +#include "quantum.h" + +void promicro_bootloader_jmp(bool program); + +#define KEYMAP( \ + k00, k01, k02, k03, k04, k05, k40, k41, k42, k43, k44, k45, \ + k10, k11, k12, k13, k14, k15, k50, k51, k52, k53, k54, k55, \ + k20, k21, k22, k23, k24, k25, k60, k61, k62, k63, k64, k65, \ + k30, k31, k32, k33, k34, k35, k70, k71, k72, k73, k74, k75 \ + ) \ + { \ + { k00, k01, k02, k03, k04, k05 }, \ + { k10, k11, k12, k13, k14, k15 }, \ + { k20, k21, k22, k23, k24, k25 }, \ + { k30, k31, k32, k33, k34, k35 }, \ + { k40, k41, k42, k43, k44, k45 }, \ + { k50, k51, k52, k53, k54, k55 }, \ + { k60, k61, k62, k63, k64, k65 }, \ + { k70, k71, k72, k73, k74, k75 } \ + } + +#endif \ No newline at end of file diff --git a/keyboards/lets_split/matrix.c b/keyboards/lets_split/matrix.c new file mode 100644 index 000000000..1d768c59b --- /dev/null +++ b/keyboards/lets_split/matrix.c @@ -0,0 +1,311 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +/* + * scan matrix + */ +#include +#include +#include +#include +#include +#include +#include "print.h" +#include "debug.h" +#include "util.h" +#include "matrix.h" +#include "i2c.h" +#include "serial.h" +#include "split_util.h" +#include "pro_micro.h" +#include "config.h" + +#ifndef DEBOUNCE +# define DEBOUNCE 5 +#endif + +#define ERROR_DISCONNECT_COUNT 5 + +static uint8_t debouncing = DEBOUNCE; +static const int ROWS_PER_HAND = MATRIX_ROWS/2; +static uint8_t error_count = 0; + +static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS; +static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS; + +/* matrix state(1:on, 0:off) */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; + +static matrix_row_t read_cols(void); +static void init_cols(void); +static void unselect_rows(void); +static void select_row(uint8_t row); + +__attribute__ ((weak)) +void matrix_init_quantum(void) { + matrix_init_kb(); +} + +__attribute__ ((weak)) +void matrix_scan_quantum(void) { + matrix_scan_kb(); +} + +__attribute__ ((weak)) +void matrix_init_kb(void) { + matrix_init_user(); +} + +__attribute__ ((weak)) +void matrix_scan_kb(void) { + matrix_scan_user(); +} + +__attribute__ ((weak)) +void matrix_init_user(void) { +} + +__attribute__ ((weak)) +void matrix_scan_user(void) { +} + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + debug_enable = true; + debug_matrix = true; + debug_mouse = true; + // initialize row and col + unselect_rows(); + init_cols(); + + TX_RX_LED_INIT; + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) { + matrix[i] = 0; + matrix_debouncing[i] = 0; + } + + matrix_init_quantum(); +} + +uint8_t _matrix_scan(void) +{ + // Right hand is stored after the left in the matirx so, we need to offset it + int offset = isLeftHand ? 0 : (ROWS_PER_HAND); + + for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { + select_row(i); + _delay_us(30); // without this wait read unstable value. + matrix_row_t cols = read_cols(); + if (matrix_debouncing[i+offset] != cols) { + matrix_debouncing[i+offset] = cols; + debouncing = DEBOUNCE; + } + unselect_rows(); + } + + if (debouncing) { + if (--debouncing) { + _delay_ms(1); + } else { + for (uint8_t i = 0; i < ROWS_PER_HAND; i++) { + matrix[i+offset] = matrix_debouncing[i+offset]; + } + } + } + + return 1; +} + +// Get rows from other half over i2c +int i2c_transaction(void) { + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + + int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE); + if (err) goto i2c_error; + + // start of matrix stored at 0x00 + err = i2c_master_write(0x00); + if (err) goto i2c_error; + + // Start read + err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ); + if (err) goto i2c_error; + + if (!err) { + int i; + for (i = 0; i < ROWS_PER_HAND-1; ++i) { + matrix[slaveOffset+i] = i2c_master_read(I2C_ACK); + } + matrix[slaveOffset+i] = i2c_master_read(I2C_NACK); + i2c_master_stop(); + } else { +i2c_error: // the cable is disconnceted, or something else went wrong + i2c_reset_state(); + return err; + } + + return 0; +} + +#ifndef USE_I2C +int serial_transaction(void) { + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + + if (serial_update_buffers()) { + return 1; + } + + for (int i = 0; i < ROWS_PER_HAND; ++i) { + matrix[slaveOffset+i] = serial_slave_buffer[i]; + } + return 0; +} +#endif + +uint8_t matrix_scan(void) +{ + int ret = _matrix_scan(); + + + +#ifdef USE_I2C + if( i2c_transaction() ) { +#else + if( serial_transaction() ) { +#endif + // turn on the indicator led when halves are disconnected + TXLED1; + + error_count++; + + if (error_count > ERROR_DISCONNECT_COUNT) { + // reset other half if disconnected + int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0; + for (int i = 0; i < ROWS_PER_HAND; ++i) { + matrix[slaveOffset+i] = 0; + } + } + } else { + // turn off the indicator led on no error + TXLED0; + error_count = 0; + } + + matrix_scan_quantum(); + + return ret; +} + +void matrix_slave_scan(void) { + _matrix_scan(); + + int offset = (isLeftHand) ? 0 : (MATRIX_ROWS / 2); + +#ifdef USE_I2C + for (int i = 0; i < ROWS_PER_HAND; ++i) { + /* i2c_slave_buffer[i] = matrix[offset+i]; */ + i2c_slave_buffer[i] = matrix[offset+i]; + } +#else + for (int i = 0; i < ROWS_PER_HAND; ++i) { + serial_slave_buffer[i] = matrix[offset+i]; + } +#endif +} + +bool matrix_is_modified(void) +{ + if (debouncing) return false; + return true; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & ((matrix_row_t)1<> 4) + 1) &= ~_BV(col_pins[x] & 0xF); + _SFR_IO8((col_pins[x] >> 4) + 2) |= _BV(col_pins[x] & 0xF); + } +} + +static matrix_row_t read_cols(void) +{ + matrix_row_t result = 0; + for(int x = 0; x < MATRIX_COLS; x++) { + result |= (_SFR_IO8(col_pins[x] >> 4) & _BV(col_pins[x] & 0xF)) ? 0 : (1 << x); + } + return result; +} + +static void unselect_rows(void) +{ + for(int x = 0; x < ROWS_PER_HAND; x++) { + _SFR_IO8((row_pins[x] >> 4) + 1) &= ~_BV(row_pins[x] & 0xF); + _SFR_IO8((row_pins[x] >> 4) + 2) |= _BV(row_pins[x] & 0xF); + } +} + +static void select_row(uint8_t row) +{ + _SFR_IO8((row_pins[row] >> 4) + 1) |= _BV(row_pins[row] & 0xF); + _SFR_IO8((row_pins[row] >> 4) + 2) &= ~_BV(row_pins[row] & 0xF); +} diff --git a/keyboards/lets_split/pro_micro.h b/keyboards/lets_split/pro_micro.h new file mode 100644 index 000000000..09e219b7b --- /dev/null +++ b/keyboards/lets_split/pro_micro.h @@ -0,0 +1,362 @@ +/* + pins_arduino.h - Pin definition functions for Arduino + Part of Arduino - http://www.arduino.cc/ + + Copyright (c) 2007 David A. Mellis + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General + Public License along with this library; if not, write to the + Free Software Foundation, Inc., 59 Temple Place, Suite 330, + Boston, MA 02111-1307 USA + + $Id: wiring.h 249 2007-02-03 16:52:51Z mellis $ +*/ + +#ifndef Pins_Arduino_h +#define Pins_Arduino_h + +#include + +// Workaround for wrong definitions in "iom32u4.h". +// This should be fixed in the AVR toolchain. +#undef UHCON +#undef UHINT +#undef UHIEN +#undef UHADDR +#undef UHFNUM +#undef UHFNUML +#undef UHFNUMH +#undef UHFLEN +#undef UPINRQX +#undef UPINTX +#undef UPNUM +#undef UPRST +#undef UPCONX +#undef UPCFG0X +#undef UPCFG1X +#undef UPSTAX +#undef UPCFG2X +#undef UPIENX +#undef UPDATX +#undef TCCR2A +#undef WGM20 +#undef WGM21 +#undef COM2B0 +#undef COM2B1 +#undef COM2A0 +#undef COM2A1 +#undef TCCR2B +#undef CS20 +#undef CS21 +#undef CS22 +#undef WGM22 +#undef FOC2B +#undef FOC2A +#undef TCNT2 +#undef TCNT2_0 +#undef TCNT2_1 +#undef TCNT2_2 +#undef TCNT2_3 +#undef TCNT2_4 +#undef TCNT2_5 +#undef TCNT2_6 +#undef TCNT2_7 +#undef OCR2A +#undef OCR2_0 +#undef OCR2_1 +#undef OCR2_2 +#undef OCR2_3 +#undef OCR2_4 +#undef OCR2_5 +#undef OCR2_6 +#undef OCR2_7 +#undef OCR2B +#undef OCR2_0 +#undef OCR2_1 +#undef OCR2_2 +#undef OCR2_3 +#undef OCR2_4 +#undef OCR2_5 +#undef OCR2_6 +#undef OCR2_7 + +#define NUM_DIGITAL_PINS 30 +#define NUM_ANALOG_INPUTS 12 + +#define TX_RX_LED_INIT DDRD |= (1<<5), DDRB |= (1<<0) +#define TXLED0 PORTD |= (1<<5) +#define TXLED1 PORTD &= ~(1<<5) +#define RXLED0 PORTB |= (1<<0) +#define RXLED1 PORTB &= ~(1<<0) + +static const uint8_t SDA = 2; +static const uint8_t SCL = 3; +#define LED_BUILTIN 13 + +// Map SPI port to 'new' pins D14..D17 +static const uint8_t SS = 17; +static const uint8_t MOSI = 16; +static const uint8_t MISO = 14; +static const uint8_t SCK = 15; + +// Mapping of analog pins as digital I/O +// A6-A11 share with digital pins +static const uint8_t A0 = 18; +static const uint8_t A1 = 19; +static const uint8_t A2 = 20; +static const uint8_t A3 = 21; +static const uint8_t A4 = 22; +static const uint8_t A5 = 23; +static const uint8_t A6 = 24; // D4 +static const uint8_t A7 = 25; // D6 +static const uint8_t A8 = 26; // D8 +static const uint8_t A9 = 27; // D9 +static const uint8_t A10 = 28; // D10 +static const uint8_t A11 = 29; // D12 + +#define digitalPinToPCICR(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCICR) : ((uint8_t *)0)) +#define digitalPinToPCICRbit(p) 0 +#define digitalPinToPCMSK(p) ((((p) >= 8 && (p) <= 11) || ((p) >= 14 && (p) <= 17) || ((p) >= A8 && (p) <= A10)) ? (&PCMSK0) : ((uint8_t *)0)) +#define digitalPinToPCMSKbit(p) ( ((p) >= 8 && (p) <= 11) ? (p) - 4 : ((p) == 14 ? 3 : ((p) == 15 ? 1 : ((p) == 16 ? 2 : ((p) == 17 ? 0 : (p - A8 + 4)))))) + +// __AVR_ATmega32U4__ has an unusual mapping of pins to channels +extern const uint8_t PROGMEM analog_pin_to_channel_PGM[]; +#define analogPinToChannel(P) ( pgm_read_byte( analog_pin_to_channel_PGM + (P) ) ) + +#define digitalPinToInterrupt(p) ((p) == 0 ? 2 : ((p) == 1 ? 3 : ((p) == 2 ? 1 : ((p) == 3 ? 0 : ((p) == 7 ? 4 : NOT_AN_INTERRUPT))))) + +#ifdef ARDUINO_MAIN + +// On the Arduino board, digital pins are also used +// for the analog output (software PWM). Analog input +// pins are a separate set. + +// ATMEL ATMEGA32U4 / ARDUINO LEONARDO +// +// D0 PD2 RXD1/INT2 +// D1 PD3 TXD1/INT3 +// D2 PD1 SDA SDA/INT1 +// D3# PD0 PWM8/SCL OC0B/SCL/INT0 +// D4 A6 PD4 ADC8 +// D5# PC6 ??? OC3A/#OC4A +// D6# A7 PD7 FastPWM #OC4D/ADC10 +// D7 PE6 INT6/AIN0 +// +// D8 A8 PB4 ADC11/PCINT4 +// D9# A9 PB5 PWM16 OC1A/#OC4B/ADC12/PCINT5 +// D10# A10 PB6 PWM16 OC1B/0c4B/ADC13/PCINT6 +// D11# PB7 PWM8/16 0C0A/OC1C/#RTS/PCINT7 +// D12 A11 PD6 T1/#OC4D/ADC9 +// D13# PC7 PWM10 CLK0/OC4A +// +// A0 D18 PF7 ADC7 +// A1 D19 PF6 ADC6 +// A2 D20 PF5 ADC5 +// A3 D21 PF4 ADC4 +// A4 D22 PF1 ADC1 +// A5 D23 PF0 ADC0 +// +// New pins D14..D17 to map SPI port to digital pins +// +// MISO D14 PB3 MISO,PCINT3 +// SCK D15 PB1 SCK,PCINT1 +// MOSI D16 PB2 MOSI,PCINT2 +// SS D17 PB0 RXLED,SS/PCINT0 +// +// Connected LEDs on board for TX and RX +// TXLED D24 PD5 XCK1 +// RXLED D17 PB0 +// HWB PE2 HWB + +// these arrays map port names (e.g. port B) to the +// appropriate addresses for various functions (e.g. reading +// and writing) +const uint16_t PROGMEM port_to_mode_PGM[] = { + NOT_A_PORT, + NOT_A_PORT, + (uint16_t) &DDRB, + (uint16_t) &DDRC, + (uint16_t) &DDRD, + (uint16_t) &DDRE, + (uint16_t) &DDRF, +}; + +const uint16_t PROGMEM port_to_output_PGM[] = { + NOT_A_PORT, + NOT_A_PORT, + (uint16_t) &PORTB, + (uint16_t) &PORTC, + (uint16_t) &PORTD, + (uint16_t) &PORTE, + (uint16_t) &PORTF, +}; + +const uint16_t PROGMEM port_to_input_PGM[] = { + NOT_A_PORT, + NOT_A_PORT, + (uint16_t) &PINB, + (uint16_t) &PINC, + (uint16_t) &PIND, + (uint16_t) &PINE, + (uint16_t) &PINF, +}; + +const uint8_t PROGMEM digital_pin_to_port_PGM[] = { + PD, // D0 - PD2 + PD, // D1 - PD3 + PD, // D2 - PD1 + PD, // D3 - PD0 + PD, // D4 - PD4 + PC, // D5 - PC6 + PD, // D6 - PD7 + PE, // D7 - PE6 + + PB, // D8 - PB4 + PB, // D9 - PB5 + PB, // D10 - PB6 + PB, // D11 - PB7 + PD, // D12 - PD6 + PC, // D13 - PC7 + + PB, // D14 - MISO - PB3 + PB, // D15 - SCK - PB1 + PB, // D16 - MOSI - PB2 + PB, // D17 - SS - PB0 + + PF, // D18 - A0 - PF7 + PF, // D19 - A1 - PF6 + PF, // D20 - A2 - PF5 + PF, // D21 - A3 - PF4 + PF, // D22 - A4 - PF1 + PF, // D23 - A5 - PF0 + + PD, // D24 - PD5 + PD, // D25 / D6 - A7 - PD7 + PB, // D26 / D8 - A8 - PB4 + PB, // D27 / D9 - A9 - PB5 + PB, // D28 / D10 - A10 - PB6 + PD, // D29 / D12 - A11 - PD6 +}; + +const uint8_t PROGMEM digital_pin_to_bit_mask_PGM[] = { + _BV(2), // D0 - PD2 + _BV(3), // D1 - PD3 + _BV(1), // D2 - PD1 + _BV(0), // D3 - PD0 + _BV(4), // D4 - PD4 + _BV(6), // D5 - PC6 + _BV(7), // D6 - PD7 + _BV(6), // D7 - PE6 + + _BV(4), // D8 - PB4 + _BV(5), // D9 - PB5 + _BV(6), // D10 - PB6 + _BV(7), // D11 - PB7 + _BV(6), // D12 - PD6 + _BV(7), // D13 - PC7 + + _BV(3), // D14 - MISO - PB3 + _BV(1), // D15 - SCK - PB1 + _BV(2), // D16 - MOSI - PB2 + _BV(0), // D17 - SS - PB0 + + _BV(7), // D18 - A0 - PF7 + _BV(6), // D19 - A1 - PF6 + _BV(5), // D20 - A2 - PF5 + _BV(4), // D21 - A3 - PF4 + _BV(1), // D22 - A4 - PF1 + _BV(0), // D23 - A5 - PF0 + + _BV(5), // D24 - PD5 + _BV(7), // D25 / D6 - A7 - PD7 + _BV(4), // D26 / D8 - A8 - PB4 + _BV(5), // D27 / D9 - A9 - PB5 + _BV(6), // D28 / D10 - A10 - PB6 + _BV(6), // D29 / D12 - A11 - PD6 +}; + +const uint8_t PROGMEM digital_pin_to_timer_PGM[] = { + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + TIMER0B, /* 3 */ + NOT_ON_TIMER, + TIMER3A, /* 5 */ + TIMER4D, /* 6 */ + NOT_ON_TIMER, + + NOT_ON_TIMER, + TIMER1A, /* 9 */ + TIMER1B, /* 10 */ + TIMER0A, /* 11 */ + + NOT_ON_TIMER, + TIMER4A, /* 13 */ + + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, + NOT_ON_TIMER, +}; + +const uint8_t PROGMEM analog_pin_to_channel_PGM[] = { + 7, // A0 PF7 ADC7 + 6, // A1 PF6 ADC6 + 5, // A2 PF5 ADC5 + 4, // A3 PF4 ADC4 + 1, // A4 PF1 ADC1 + 0, // A5 PF0 ADC0 + 8, // A6 D4 PD4 ADC8 + 10, // A7 D6 PD7 ADC10 + 11, // A8 D8 PB4 ADC11 + 12, // A9 D9 PB5 ADC12 + 13, // A10 D10 PB6 ADC13 + 9 // A11 D12 PD6 ADC9 +}; + +#endif /* ARDUINO_MAIN */ + +// These serial port names are intended to allow libraries and architecture-neutral +// sketches to automatically default to the correct port name for a particular type +// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN, +// the first hardware serial port whose RX/TX pins are not dedicated to another use. +// +// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor +// +// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial +// +// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library +// +// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins. +// +// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX +// pins are NOT connected to anything by default. +#define SERIAL_PORT_MONITOR Serial +#define SERIAL_PORT_USBVIRTUAL Serial +#define SERIAL_PORT_HARDWARE Serial1 +#define SERIAL_PORT_HARDWARE_OPEN Serial1 + +#endif /* Pins_Arduino_h */ diff --git a/keyboards/lets_split/readme.md b/keyboards/lets_split/readme.md new file mode 100644 index 000000000..73fdb0f78 --- /dev/null +++ b/keyboards/lets_split/readme.md @@ -0,0 +1,102 @@ +Let's Split +====== + +This readme and most of the code are from https://github.com/ahtn/tmk_keyboard/ + +Split keyboard firmware for Arduino Pro Micro or other ATmega32u4 +based boards. + +Features +-------- + +Some features supported by the firmware: + +* Either half can connect to the computer via USB, or both halves can be used + independently. +* You only need 3 wires to connect the two halves. Two for VCC and GND and one + for serial communication. +* Optional support for I2C connection between the two halves if for some + reason you require a faster connection between the two halves. Note this + requires an extra wire between halves and pull-up resistors on the data lines. + +Required Hardware +----------------- + +Apart from diodes and key switches for the keyboard matrix in each half, you +will need: + +* 2 Arduino Pro Micro's. You can find theses on aliexpress for ≈3.50USD each. +* 2 TRS sockets +* 1 TRS cable. + +Alternatively, you can use any sort of cable and socket that has at least 3 +wires. If you want to use I2C to communicate between halves, you will need a +cable with at least 4 wires and 2x 4.7kΩ pull-up resistors + +Optional Hardware +----------------- + +A speaker can be hooked-up to either side to the `5` (`C6`) pin and `GND`, and turned on via `AUDIO_ENABLE`. + +Wiring +------ + +The 3 wires of the TRS cable need to connect GND, VCC, and digital pin 3 (i.e. +PD0 on the ATmega32u4) between the two Pro Micros. + +Then wire your key matrix to any of the remaining 17 IO pins of the pro micro +and modify the `matrix.c` accordingly. + +The wiring for serial: + +![serial wiring](imgs/split-keyboard-serial-schematic.png) + +The wiring for i2c: + +![i2c wiring](imgs/split-keyboard-i2c-schematic.png) + +The pull-up resistors may be placed on either half. It is also possible +to use 4 resistors and have the pull-ups in both halves, but this is +unnecessary in simple use cases. + +Notes on Software Configuration +------------------------------- + +Configuring the firmware is similar to any other TMK project. One thing +to note is that `MATIX_ROWS` in `config.h` is the total number of rows between +the two halves, i.e. if your split keyboard has 4 rows in each half, then +`MATRIX_ROWS=8`. + +Also the current implementation assumes a maximum of 8 columns, but it would +not be very difficult to adapt it to support more if required. + + +Flashing +-------- + +If you define `EE_HANDS` in your `config.h`, you will need to set the +EEPROM for the left and right halves. The EEPROM is used to store whether the +half is left handed or right handed. This makes it so that the same firmware +file will run on both hands instead of having to flash left and right handed +versions of the firmware to each half. To flash the EEPROM file for the left +half run: +``` +make eeprom-left +``` +and similarly for right half +``` +make eeprom-right +``` + +After you have flashed the EEPROM for the first time, you then need to program +the flash memory: +``` +make program +``` +Note that you need to program both halves, but you have the option of using +different keymaps for each half. You could program the left half with a QWERTY +layout and the right half with a Colemak layout. Then if you connect the left +half to a computer by USB the keyboard will use QWERTY and Colemak when the +right half is connected. + + diff --git a/keyboards/lets_split/serial.c b/keyboards/lets_split/serial.c new file mode 100644 index 000000000..f439c2f20 --- /dev/null +++ b/keyboards/lets_split/serial.c @@ -0,0 +1,225 @@ +/* + * WARNING: be careful changing this code, it is very timing dependent + */ + +#ifndef F_CPU +#define F_CPU 16000000 +#endif + +#include +#include +#include +#include + +#include "serial.h" + +// Serial pulse period in microseconds. Its probably a bad idea to lower this +// value. +#define SERIAL_DELAY 24 + +uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0}; +uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0}; + +#define SLAVE_DATA_CORRUPT (1<<0) +volatile uint8_t status = 0; + +inline static +void serial_delay(void) { + _delay_us(SERIAL_DELAY); +} + +inline static +void serial_output(void) { + SERIAL_PIN_DDR |= SERIAL_PIN_MASK; +} + +// make the serial pin an input with pull-up resistor +inline static +void serial_input(void) { + SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK; + SERIAL_PIN_PORT |= SERIAL_PIN_MASK; +} + +inline static +uint8_t serial_read_pin(void) { + return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK); +} + +inline static +void serial_low(void) { + SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK; +} + +inline static +void serial_high(void) { + SERIAL_PIN_PORT |= SERIAL_PIN_MASK; +} + +void serial_master_init(void) { + serial_output(); + serial_high(); +} + +void serial_slave_init(void) { + serial_input(); + + // Enable INT0 + EIMSK |= _BV(INT0); + // Trigger on falling edge of INT0 + EICRA &= ~(_BV(ISC00) | _BV(ISC01)); +} + +// Used by the master to synchronize timing with the slave. +static +void sync_recv(void) { + serial_input(); + // This shouldn't hang if the slave disconnects because the + // serial line will float to high if the slave does disconnect. + while (!serial_read_pin()); + serial_delay(); +} + +// Used by the slave to send a synchronization signal to the master. +static +void sync_send(void) { + serial_output(); + + serial_low(); + serial_delay(); + + serial_high(); +} + +// Reads a byte from the serial line +static +uint8_t serial_read_byte(void) { + uint8_t byte = 0; + serial_input(); + for ( uint8_t i = 0; i < 8; ++i) { + byte = (byte << 1) | serial_read_pin(); + serial_delay(); + _delay_us(1); + } + + return byte; +} + +// Sends a byte with MSB ordering +static +void serial_write_byte(uint8_t data) { + uint8_t b = 8; + serial_output(); + while( b-- ) { + if(data & (1 << b)) { + serial_high(); + } else { + serial_low(); + } + serial_delay(); + } +} + +// interrupt handle to be used by the slave device +ISR(SERIAL_PIN_INTERRUPT) { + sync_send(); + + uint8_t checksum = 0; + for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { + serial_write_byte(serial_slave_buffer[i]); + sync_send(); + checksum += serial_slave_buffer[i]; + } + serial_write_byte(checksum); + sync_send(); + + // wait for the sync to finish sending + serial_delay(); + + // read the middle of pulses + _delay_us(SERIAL_DELAY/2); + + uint8_t checksum_computed = 0; + for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { + serial_master_buffer[i] = serial_read_byte(); + sync_send(); + checksum_computed += serial_master_buffer[i]; + } + uint8_t checksum_received = serial_read_byte(); + sync_send(); + + serial_input(); // end transaction + + if ( checksum_computed != checksum_received ) { + status |= SLAVE_DATA_CORRUPT; + } else { + status &= ~SLAVE_DATA_CORRUPT; + } +} + +inline +bool serial_slave_DATA_CORRUPT(void) { + return status & SLAVE_DATA_CORRUPT; +} + +// Copies the serial_slave_buffer to the master and sends the +// serial_master_buffer to the slave. +// +// Returns: +// 0 => no error +// 1 => slave did not respond +int serial_update_buffers(void) { + // this code is very time dependent, so we need to disable interrupts + cli(); + + // signal to the slave that we want to start a transaction + serial_output(); + serial_low(); + _delay_us(1); + + // wait for the slaves response + serial_input(); + serial_high(); + _delay_us(SERIAL_DELAY); + + // check if the slave is present + if (serial_read_pin()) { + // slave failed to pull the line low, assume not present + sei(); + return 1; + } + + // if the slave is present syncronize with it + sync_recv(); + + uint8_t checksum_computed = 0; + // receive data from the slave + for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) { + serial_slave_buffer[i] = serial_read_byte(); + sync_recv(); + checksum_computed += serial_slave_buffer[i]; + } + uint8_t checksum_received = serial_read_byte(); + sync_recv(); + + if (checksum_computed != checksum_received) { + sei(); + return 1; + } + + uint8_t checksum = 0; + // send data to the slave + for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) { + serial_write_byte(serial_master_buffer[i]); + sync_recv(); + checksum += serial_master_buffer[i]; + } + serial_write_byte(checksum); + sync_recv(); + + // always, release the line when not in use + serial_output(); + serial_high(); + + sei(); + return 0; +} diff --git a/keyboards/lets_split/serial.h b/keyboards/lets_split/serial.h new file mode 100644 index 000000000..15fe4db7b --- /dev/null +++ b/keyboards/lets_split/serial.h @@ -0,0 +1,26 @@ +#ifndef MY_SERIAL_H +#define MY_SERIAL_H + +#include "config.h" +#include + +/* TODO: some defines for interrupt setup */ +#define SERIAL_PIN_DDR DDRD +#define SERIAL_PIN_PORT PORTD +#define SERIAL_PIN_INPUT PIND +#define SERIAL_PIN_MASK _BV(PD0) +#define SERIAL_PIN_INTERRUPT INT0_vect + +#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2 +#define SERIAL_MASTER_BUFFER_LENGTH 1 + +// Buffers for master - slave communication +extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH]; +extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH]; + +void serial_master_init(void); +void serial_slave_init(void); +int serial_update_buffers(void); +bool serial_slave_data_corrupt(void); + +#endif diff --git a/keyboards/lets_split/split_util.c b/keyboards/lets_split/split_util.c new file mode 100644 index 000000000..65003a71a --- /dev/null +++ b/keyboards/lets_split/split_util.c @@ -0,0 +1,76 @@ +#include +#include +#include +#include +#include +#include +#include "split_util.h" +#include "matrix.h" +#include "i2c.h" +#include "serial.h" +#include "keyboard.h" +#include "config.h" + +volatile bool isLeftHand = true; + +static void setup_handedness(void) { + #ifdef EE_HANDS + isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS); + #else + #ifdef I2C_MASTER_RIGHT + isLeftHand = !has_usb(); + #else + isLeftHand = has_usb(); + #endif + #endif +} + +static void keyboard_master_setup(void) { +#ifdef USE_I2C + i2c_master_init(); +#else + serial_master_init(); +#endif +} + +static void keyboard_slave_setup(void) { +#ifdef USE_I2C + i2c_slave_init(SLAVE_I2C_ADDRESS); +#else + serial_slave_init(); +#endif +} + +bool has_usb(void) { + USBCON |= (1 << OTGPADE); //enables VBUS pad + _delay_us(5); + return (USBSTA & (1< + +#ifdef EE_HANDS + #define EECONFIG_BOOTMAGIC_END (uint8_t *)10 + #define EECONFIG_HANDEDNESS EECONFIG_BOOTMAGIC_END +#endif + +#define SLAVE_I2C_ADDRESS 0x32 + +extern volatile bool isLeftHand; + +// slave version of matix scan, defined in matrix.c +void matrix_slave_scan(void); + +void split_keyboard_setup(void); +bool has_usb(void); +void keyboard_slave_loop(void); + +#endif diff --git a/keyboards/planck/keymaps/default/keymap.c b/keyboards/planck/keymaps/default/keymap.c index 9b4b33f82..5f71ae7d1 100644 --- a/keyboards/planck/keymaps/default/keymap.c +++ b/keyboards/planck/keymaps/default/keymap.c @@ -197,8 +197,8 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { #endif persistant_default_layer_set(1UL<<_QWERTY); } - break; return false; + break; case COLEMAK: if (record->event.pressed) { #ifdef AUDIO_ENABLE @@ -206,8 +206,8 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { #endif persistant_default_layer_set(1UL<<_COLEMAK); } - break; return false; + break; case DVORAK: if (record->event.pressed) { #ifdef AUDIO_ENABLE @@ -215,8 +215,8 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { #endif persistant_default_layer_set(1UL<<_DVORAK); } - break; return false; + break; case LOWER: if (record->event.pressed) { layer_on(_LOWER); @@ -225,8 +225,8 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { layer_off(_LOWER); update_tri_layer(_LOWER, _RAISE, _ADJUST); } - break; return false; + break; case RAISE: if (record->event.pressed) { layer_on(_RAISE); @@ -235,8 +235,8 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { layer_off(_RAISE); update_tri_layer(_LOWER, _RAISE, _ADJUST); } - break; return false; + break; case BACKLIT: if (record->event.pressed) { register_code(KC_RSFT); @@ -246,8 +246,8 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } else { unregister_code(KC_RSFT); } - break; return false; + break; case PLOVER: if (record->event.pressed) { #ifdef AUDIO_ENABLE @@ -265,8 +265,8 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { keymap_config.nkro = 1; eeconfig_update_keymap(keymap_config.raw); } - break; return false; + break; case EXT_PLV: if (record->event.pressed) { #ifdef AUDIO_ENABLE @@ -274,8 +274,8 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { #endif layer_off(_PLOVER); } - break; return false; + break; } return true; } diff --git a/keyboards/preonic/keymaps/default/keymap.c b/keyboards/preonic/keymaps/default/keymap.c index 6d8ef634d..9a957f7ee 100644 --- a/keyboards/preonic/keymaps/default/keymap.c +++ b/keyboards/preonic/keymaps/default/keymap.c @@ -191,8 +191,8 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { #endif persistant_default_layer_set(1UL<<_QWERTY); } - break; return false; + break; case COLEMAK: if (record->event.pressed) { #ifdef AUDIO_ENABLE @@ -200,8 +200,8 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { #endif persistant_default_layer_set(1UL<<_COLEMAK); } - break; return false; + break; case DVORAK: if (record->event.pressed) { #ifdef AUDIO_ENABLE @@ -209,8 +209,8 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { #endif persistant_default_layer_set(1UL<<_DVORAK); } - break; return false; + break; case LOWER: if (record->event.pressed) { layer_on(_LOWER); @@ -219,8 +219,8 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { layer_off(_LOWER); update_tri_layer(_LOWER, _RAISE, _ADJUST); } - break; return false; + break; case RAISE: if (record->event.pressed) { layer_on(_RAISE); @@ -229,8 +229,8 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { layer_off(_RAISE); update_tri_layer(_LOWER, _RAISE, _ADJUST); } - break; return false; + break; case BACKLIT: if (record->event.pressed) { register_code(KC_RSFT); @@ -240,8 +240,8 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) { } else { unregister_code(KC_RSFT); } - break; return false; + break; } return true; }; diff --git a/keyboards/stm32_f103_onekey/keymaps/default/keymap.c b/keyboards/stm32_f103_onekey/keymaps/default/keymap.c deleted file mode 100644 index c3b0f0840..000000000 --- a/keyboards/stm32_f103_onekey/keymaps/default/keymap.c +++ /dev/null @@ -1,25 +0,0 @@ -/* -Copyright 2012,2013 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include "stm32_f103_onekey.h" - -const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - {{KC_CAPS}}, // test with KC_CAPS, KC_A, KC_BTLD -}; - -const uint16_t fn_actions[] = { -}; diff --git a/keyboards/teensy_lc_onekey/keymaps/default/keymap.c b/keyboards/teensy_lc_onekey/keymaps/default/keymap.c deleted file mode 100644 index a109b4960..000000000 --- a/keyboards/teensy_lc_onekey/keymaps/default/keymap.c +++ /dev/null @@ -1,32 +0,0 @@ -/* -Copyright 2012,2013 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ - -#include "keycode.h" -#include "action.h" -#include "action_macro.h" -#include "report.h" -#include "host.h" -#include "print.h" -#include "debug.h" -#include "keymap.h" - -const uint16_t keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - {{KC_A}}, -}; // to test: KC_CAPS, KT_BTLD, KC_A - -const uint16_t fn_actions[] = { -}; diff --git a/lib/ugfx b/lib/ugfx new file mode 160000 index 000000000..13e084ae6 --- /dev/null +++ b/lib/ugfx @@ -0,0 +1 @@ +Subproject commit 13e084ae6231857cd0d472c529f34be07d93c08b diff --git a/quantum/keymap_extras/keymap_spanish.h b/quantum/keymap_extras/keymap_spanish.h index 512d8a374..af76e39fc 100644 --- a/quantum/keymap_extras/keymap_spanish.h +++ b/quantum/keymap_extras/keymap_spanish.h @@ -49,7 +49,7 @@ #define ES_PIPE ALGR(KC_1) #define ES_AT ALGR(KC_2) #define ES_HASH ALGR(KC_3) -#define ES_TILD ALGR(KC_4) +#define ES_TILD ALGR(ES_NTIL) #define ES_EURO ALGR(KC_5) #define ES_NOT ALGR(KC_6) @@ -59,4 +59,4 @@ #define ES_LCBR ALGR(ES_ACUT) #define ES_RCRB ALGR(ES_CCED) -#endif \ No newline at end of file +#endif diff --git a/quantum/matrix.c b/quantum/matrix.c index 094917025..3174e0739 100644 --- a/quantum/matrix.c +++ b/quantum/matrix.c @@ -27,16 +27,6 @@ along with this program. If not, see . #include "matrix.h" /* Set 0 if debouncing isn't needed */ -/* - * This constant define not debouncing time in msecs, but amount of matrix - * scan loops which should be made to get stable debounced results. - * - * On Ergodox matrix scan rate is relatively low, because of slow I2C. - * Now it's only 317 scans/second, or about 3.15 msec/scan. - * According to Cherry specs, debouncing time is 5 msec. - * - * And so, there is no sense to have DEBOUNCE higher than 2. - */ #ifndef DEBOUNCING_DELAY # define DEBOUNCING_DELAY 5 @@ -168,7 +158,7 @@ uint8_t matrix_scan(void) if (debouncing) { if (--debouncing) { - wait_us(1); + wait_ms(1); } else { for (uint8_t i = 0; i < MATRIX_ROWS; i++) { matrix[i] = matrix_debouncing[i]; @@ -192,7 +182,7 @@ uint8_t matrix_scan(void) if (debouncing) { if (--debouncing) { - wait_us(1); + wait_ms(1); } else { for (uint8_t i = 0; i < MATRIX_COLS; i++) { matrix_reversed[i] = matrix_reversed_debouncing[i]; diff --git a/quantum/quantum.c b/quantum/quantum.c index d59bd5a3f..d8e43a465 100644 --- a/quantum/quantum.c +++ b/quantum/quantum.c @@ -89,7 +89,7 @@ bool process_record_quantum(keyrecord_t *record) { shutdown_user(); #endif wait_ms(250); - #ifdef ATREUS_ASTAR + #ifdef CATERINA_BOOTLOADER *(uint16_t *)0x0800 = 0x7777; // these two are a-star-specific #endif bootloader_jump(); diff --git a/quantum/serial_link/LICENSE b/quantum/serial_link/LICENSE new file mode 100644 index 000000000..d7cc3198c --- /dev/null +++ b/quantum/serial_link/LICENSE @@ -0,0 +1,21 @@ +The MIT License (MIT) + +Copyright (c) 2016 Fred Sundvik + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. diff --git a/quantum/serial_link/README.md b/quantum/serial_link/README.md new file mode 100644 index 000000000..e8490e290 --- /dev/null +++ b/quantum/serial_link/README.md @@ -0,0 +1 @@ +# qmk_serial_link \ No newline at end of file diff --git a/quantum/serial_link/protocol/byte_stuffer.c b/quantum/serial_link/protocol/byte_stuffer.c new file mode 100644 index 000000000..fb4c45a8d --- /dev/null +++ b/quantum/serial_link/protocol/byte_stuffer.c @@ -0,0 +1,145 @@ +/* +The MIT License (MIT) + +Copyright (c) 2016 Fred Sundvik + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. +*/ + +#include "serial_link/protocol/byte_stuffer.h" +#include "serial_link/protocol/frame_validator.h" +#include "serial_link/protocol/physical.h" +#include + +// This implements the "Consistent overhead byte stuffing protocol" +// https://en.wikipedia.org/wiki/Consistent_Overhead_Byte_Stuffing +// http://www.stuartcheshire.org/papers/COBSforToN.pdf + +#define MAX_FRAME_SIZE 1024 +#define NUM_LINKS 2 + +typedef struct byte_stuffer_state { + uint16_t next_zero; + uint16_t data_pos; + bool long_frame; + uint8_t data[MAX_FRAME_SIZE]; +}byte_stuffer_state_t; + +static byte_stuffer_state_t states[NUM_LINKS]; + +void init_byte_stuffer_state(byte_stuffer_state_t* state) { + state->next_zero = 0; + state->data_pos = 0; + state->long_frame = false; +} + +void init_byte_stuffer(void) { + int i; + for (i=0;inext_zero == 0) { + state->next_zero = data; + state->long_frame = data == 0xFF; + state->data_pos = 0; + return; + } + + state->next_zero--; + if (data == 0) { + if (state->next_zero == 0) { + // The frame is completed + if (state->data_pos > 0) { + validator_recv_frame(link, state->data, state->data_pos); + } + } + else { + // The frame is invalid, so reset + init_byte_stuffer_state(state); + } + } + else { + if (state->data_pos == MAX_FRAME_SIZE) { + // We exceeded our maximum frame size + // therefore there's nothing else to do than reset to a new frame + state->next_zero = data; + state->long_frame = data == 0xFF; + state->data_pos = 0; + } + else if (state->next_zero == 0) { + if (state->long_frame) { + // This is part of a long frame, so continue + state->next_zero = data; + state->long_frame = data == 0xFF; + } + else { + // Special case for zeroes + state->next_zero = data; + state->data[state->data_pos++] = 0; + } + } + else { + state->data[state->data_pos++] = data; + } + } +} + +static void send_block(uint8_t link, uint8_t* start, uint8_t* end, uint8_t num_non_zero) { + send_data(link, &num_non_zero, 1); + if (end > start) { + send_data(link, start, end-start); + } +} + +void byte_stuffer_send_frame(uint8_t link, uint8_t* data, uint16_t size) { + const uint8_t zero = 0; + if (size > 0) { + uint16_t num_non_zero = 1; + uint8_t* end = data + size; + uint8_t* start = data; + while (data < end) { + if (num_non_zero == 0xFF) { + // There's more data after big non-zero block + // So send it, and start a new block + send_block(link, start, data, num_non_zero); + start = data; + num_non_zero = 1; + } + else { + if (*data == 0) { + // A zero encountered, so send the block + send_block(link, start, data, num_non_zero); + start = data + 1; + num_non_zero = 1; + } + else { + num_non_zero++; + } + ++data; + } + } + send_block(link, start, data, num_non_zero); + send_data(link, &zero, 1); + } +} diff --git a/quantum/serial_link/protocol/byte_stuffer.h b/quantum/serial_link/protocol/byte_stuffer.h new file mode 100644 index 000000000..2cc88beb4 --- /dev/null +++ b/quantum/serial_link/protocol/byte_stuffer.h @@ -0,0 +1,34 @@ +/* +The MIT License (MIT) + +Copyright (c) 2016 Fred Sundvik + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. +*/ + +#ifndef SERIAL_LINK_BYTE_STUFFER_H +#define SERIAL_LINK_BYTE_STUFFER_H + +#include + +void init_byte_stuffer(void); +void byte_stuffer_recv_byte(uint8_t link, uint8_t data); +void byte_stuffer_send_frame(uint8_t link, uint8_t* data, uint16_t size); + +#endif diff --git a/quantum/serial_link/protocol/frame_router.c b/quantum/serial_link/protocol/frame_router.c new file mode 100644 index 000000000..04b8c2e75 --- /dev/null +++ b/quantum/serial_link/protocol/frame_router.c @@ -0,0 +1,69 @@ +/* +The MIT License (MIT) + +Copyright (c) 2016 Fred Sundvik + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. +*/ + +#include "serial_link/protocol/frame_router.h" +#include "serial_link/protocol/transport.h" +#include "serial_link/protocol/frame_validator.h" + +static bool is_master; + +void router_set_master(bool master) { + is_master = master; +} + +void route_incoming_frame(uint8_t link, uint8_t* data, uint16_t size){ + if (is_master) { + if (link == DOWN_LINK) { + transport_recv_frame(data[size-1], data, size - 1); + } + } + else { + if (link == UP_LINK) { + if (data[size-1] & 1) { + transport_recv_frame(0, data, size - 1); + } + data[size-1] >>= 1; + validator_send_frame(DOWN_LINK, data, size); + } + else { + data[size-1]++; + validator_send_frame(UP_LINK, data, size); + } + } +} + +void router_send_frame(uint8_t destination, uint8_t* data, uint16_t size) { + if (destination == 0) { + if (!is_master) { + data[size] = 1; + validator_send_frame(UP_LINK, data, size + 1); + } + } + else { + if (is_master) { + data[size] = destination; + validator_send_frame(DOWN_LINK, data, size + 1); + } + } +} diff --git a/quantum/serial_link/protocol/frame_router.h b/quantum/serial_link/protocol/frame_router.h new file mode 100644 index 000000000..712250ff3 --- /dev/null +++ b/quantum/serial_link/protocol/frame_router.h @@ -0,0 +1,38 @@ +/* +The MIT License (MIT) + +Copyright (c) 2016 Fred Sundvik + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. +*/ + +#ifndef SERIAL_LINK_FRAME_ROUTER_H +#define SERIAL_LINK_FRAME_ROUTER_H + +#include +#include + +#define UP_LINK 0 +#define DOWN_LINK 1 + +void router_set_master(bool master); +void route_incoming_frame(uint8_t link, uint8_t* data, uint16_t size); +void router_send_frame(uint8_t destination, uint8_t* data, uint16_t size); + +#endif diff --git a/quantum/serial_link/protocol/frame_validator.c b/quantum/serial_link/protocol/frame_validator.c new file mode 100644 index 000000000..474f80ee8 --- /dev/null +++ b/quantum/serial_link/protocol/frame_validator.c @@ -0,0 +1,121 @@ +/* +The MIT License (MIT) + +Copyright (c) 2016 Fred Sundvik + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. +*/ + +#include "serial_link/protocol/frame_validator.h" +#include "serial_link/protocol/frame_router.h" +#include "serial_link/protocol/byte_stuffer.h" +#include + +const uint32_t poly8_lookup[256] = +{ + 0, 0x77073096, 0xEE0E612C, 0x990951BA, + 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3, + 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988, + 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91, + 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE, + 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7, + 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC, + 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5, + 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172, + 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B, + 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940, + 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59, + 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116, + 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F, + 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924, + 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D, + 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A, + 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433, + 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818, + 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01, + 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E, + 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457, + 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C, + 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65, + 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2, + 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB, + 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0, + 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9, + 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086, + 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F, + 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4, + 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD, + 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A, + 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683, + 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8, + 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1, + 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE, + 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7, + 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC, + 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5, + 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252, + 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B, + 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60, + 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79, + 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236, + 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F, + 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04, + 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D, + 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A, + 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713, + 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38, + 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21, + 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E, + 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777, + 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C, + 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45, + 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2, + 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB, + 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0, + 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9, + 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6, + 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF, + 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94, + 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D +}; + +static uint32_t crc32_byte(uint8_t *p, uint32_t bytelength) +{ + uint32_t crc = 0xffffffff; + while (bytelength-- !=0) crc = poly8_lookup[((uint8_t) crc ^ *(p++))] ^ (crc >> 8); + // return (~crc); also works + return (crc ^ 0xffffffff); +} + +void validator_recv_frame(uint8_t link, uint8_t* data, uint16_t size) { + if (size > 4) { + uint32_t frame_crc; + memcpy(&frame_crc, data + size -4, 4); + uint32_t expected_crc = crc32_byte(data, size - 4); + if (frame_crc == expected_crc) { + route_incoming_frame(link, data, size-4); + } + } +} + +void validator_send_frame(uint8_t link, uint8_t* data, uint16_t size) { + uint32_t crc = crc32_byte(data, size); + memcpy(data + size, &crc, 4); + byte_stuffer_send_frame(link, data, size + 4); +} diff --git a/quantum/serial_link/protocol/frame_validator.h b/quantum/serial_link/protocol/frame_validator.h new file mode 100644 index 000000000..4a910d510 --- /dev/null +++ b/quantum/serial_link/protocol/frame_validator.h @@ -0,0 +1,34 @@ +/* +The MIT License (MIT) + +Copyright (c) 2016 Fred Sundvik + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. +*/ + +#ifndef SERIAL_LINK_FRAME_VALIDATOR_H +#define SERIAL_LINK_FRAME_VALIDATOR_H + +#include + +void validator_recv_frame(uint8_t link, uint8_t* data, uint16_t size); +// The buffer pointed to by the data needs 4 additional bytes +void validator_send_frame(uint8_t link, uint8_t* data, uint16_t size); + +#endif diff --git a/quantum/serial_link/protocol/physical.h b/quantum/serial_link/protocol/physical.h new file mode 100644 index 000000000..425e06cdd --- /dev/null +++ b/quantum/serial_link/protocol/physical.h @@ -0,0 +1,30 @@ +/* +The MIT License (MIT) + +Copyright (c) 2016 Fred Sundvik + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. +*/ + +#ifndef SERIAL_LINK_PHYSICAL_H +#define SERIAL_LINK_PHYSICAL_H + +void send_data(uint8_t link, const uint8_t* data, uint16_t size); + +#endif diff --git a/quantum/serial_link/protocol/transport.c b/quantum/serial_link/protocol/transport.c new file mode 100644 index 000000000..f418d11ce --- /dev/null +++ b/quantum/serial_link/protocol/transport.c @@ -0,0 +1,124 @@ +/* +The MIT License (MIT) + +Copyright (c) 2016 Fred Sundvik + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. +*/ + +#include "serial_link/protocol/transport.h" +#include "serial_link/protocol/frame_router.h" +#include "serial_link/protocol/triple_buffered_object.h" +#include + +#define MAX_REMOTE_OBJECTS 16 +static remote_object_t* remote_objects[MAX_REMOTE_OBJECTS]; +static uint32_t num_remote_objects = 0; + +void add_remote_objects(remote_object_t** _remote_objects, uint32_t _num_remote_objects) { + unsigned int i; + for(i=0;i<_num_remote_objects;i++) { + remote_object_t* obj = _remote_objects[i]; + remote_objects[num_remote_objects++] = obj; + if (obj->object_type == MASTER_TO_ALL_SLAVES) { + triple_buffer_object_t* tb = (triple_buffer_object_t*)obj->buffer; + triple_buffer_init(tb); + uint8_t* start = obj->buffer + LOCAL_OBJECT_SIZE(obj->object_size); + tb = (triple_buffer_object_t*)start; + triple_buffer_init(tb); + } + else if(obj->object_type == MASTER_TO_SINGLE_SLAVE) { + uint8_t* start = obj->buffer; + unsigned int j; + for (j=0;jobject_size); + } + triple_buffer_object_t* tb = (triple_buffer_object_t*)start; + triple_buffer_init(tb); + } + else { + uint8_t* start = obj->buffer; + triple_buffer_object_t* tb = (triple_buffer_object_t*)start; + triple_buffer_init(tb); + start += LOCAL_OBJECT_SIZE(obj->object_size); + unsigned int j; + for (j=0;jobject_size); + } + } + } +} + +void transport_recv_frame(uint8_t from, uint8_t* data, uint16_t size) { + uint8_t id = data[size-1]; + if (id < num_remote_objects) { + remote_object_t* obj = remote_objects[id]; + if (obj->object_size == size - 1) { + uint8_t* start; + if (obj->object_type == MASTER_TO_ALL_SLAVES) { + start = obj->buffer + LOCAL_OBJECT_SIZE(obj->object_size); + } + else if(obj->object_type == SLAVE_TO_MASTER) { + start = obj->buffer + LOCAL_OBJECT_SIZE(obj->object_size); + start += (from - 1) * REMOTE_OBJECT_SIZE(obj->object_size); + } + else { + start = obj->buffer + NUM_SLAVES * LOCAL_OBJECT_SIZE(obj->object_size); + } + triple_buffer_object_t* tb = (triple_buffer_object_t*)start; + void* ptr = triple_buffer_begin_write_internal(obj->object_size, tb); + memcpy(ptr, data, size - 1); + triple_buffer_end_write_internal(tb); + } + } +} + +void update_transport(void) { + unsigned int i; + for(i=0;iobject_type == MASTER_TO_ALL_SLAVES || obj->object_type == SLAVE_TO_MASTER) { + triple_buffer_object_t* tb = (triple_buffer_object_t*)obj->buffer; + uint8_t* ptr = (uint8_t*)triple_buffer_read_internal(obj->object_size + LOCAL_OBJECT_EXTRA, tb); + if (ptr) { + ptr[obj->object_size] = i; + uint8_t dest = obj->object_type == MASTER_TO_ALL_SLAVES ? 0xFF : 0; + router_send_frame(dest, ptr, obj->object_size + 1); + } + } + else { + uint8_t* start = obj->buffer; + unsigned int j; + for (j=0;jobject_size + LOCAL_OBJECT_EXTRA, tb); + if (ptr) { + ptr[obj->object_size] = i; + uint8_t dest = j + 1; + router_send_frame(dest, ptr, obj->object_size + 1); + } + start += LOCAL_OBJECT_SIZE(obj->object_size); + } + } + } +} diff --git a/quantum/serial_link/protocol/transport.h b/quantum/serial_link/protocol/transport.h new file mode 100644 index 000000000..9a052d880 --- /dev/null +++ b/quantum/serial_link/protocol/transport.h @@ -0,0 +1,151 @@ +/* +The MIT License (MIT) + +Copyright (c) 2016 Fred Sundvik + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. +*/ + +#ifndef SERIAL_LINK_TRANSPORT_H +#define SERIAL_LINK_TRANSPORT_H + +#include "serial_link/protocol/triple_buffered_object.h" +#include "serial_link/system/serial_link.h" + +#define NUM_SLAVES 8 +#define LOCAL_OBJECT_EXTRA 16 + +// master -> slave = 1 local(target all), 1 remote object +// slave -> master = 1 local(target 0), multiple remote objects +// master -> single slave (multiple local, target id), 1 remote object +typedef enum { + MASTER_TO_ALL_SLAVES, + MASTER_TO_SINGLE_SLAVE, + SLAVE_TO_MASTER, +} remote_object_type; + +typedef struct { + remote_object_type object_type; + uint16_t object_size; + uint8_t buffer[] __attribute__((aligned(4))); +} remote_object_t; + +#define REMOTE_OBJECT_SIZE(objectsize) \ + (sizeof(triple_buffer_object_t) + objectsize * 3) +#define LOCAL_OBJECT_SIZE(objectsize) \ + (sizeof(triple_buffer_object_t) + (objectsize + LOCAL_OBJECT_EXTRA) * 3) + +#define REMOTE_OBJECT_HELPER(name, type, num_local, num_remote) \ +typedef struct { \ + remote_object_t object; \ + uint8_t buffer[ \ + num_remote * REMOTE_OBJECT_SIZE(sizeof(type)) + \ + num_local * LOCAL_OBJECT_SIZE(sizeof(type))]; \ +} remote_object_##name##_t; + +#define MASTER_TO_ALL_SLAVES_OBJECT(name, type) \ + REMOTE_OBJECT_HELPER(name, type, 1, 1) \ + remote_object_##name##_t remote_object_##name = { \ + .object = { \ + .object_type = MASTER_TO_ALL_SLAVES, \ + .object_size = sizeof(type), \ + } \ + }; \ + type* begin_write_##name(void) { \ + remote_object_t* obj = (remote_object_t*)&remote_object_##name; \ + triple_buffer_object_t* tb = (triple_buffer_object_t*)obj->buffer; \ + return (type*)triple_buffer_begin_write_internal(sizeof(type) + LOCAL_OBJECT_EXTRA, tb); \ + }\ + void end_write_##name(void) { \ + remote_object_t* obj = (remote_object_t*)&remote_object_##name; \ + triple_buffer_object_t* tb = (triple_buffer_object_t*)obj->buffer; \ + triple_buffer_end_write_internal(tb); \ + signal_data_written(); \ + }\ + type* read_##name(void) { \ + remote_object_t* obj = (remote_object_t*)&remote_object_##name; \ + uint8_t* start = obj->buffer + LOCAL_OBJECT_SIZE(obj->object_size);\ + triple_buffer_object_t* tb = (triple_buffer_object_t*)start; \ + return triple_buffer_read_internal(obj->object_size, tb); \ + } + +#define MASTER_TO_SINGLE_SLAVE_OBJECT(name, type) \ + REMOTE_OBJECT_HELPER(name, type, NUM_SLAVES, 1) \ + remote_object_##name##_t remote_object_##name = { \ + .object = { \ + .object_type = MASTER_TO_SINGLE_SLAVE, \ + .object_size = sizeof(type), \ + } \ + }; \ + type* begin_write_##name(uint8_t slave) { \ + remote_object_t* obj = (remote_object_t*)&remote_object_##name; \ + uint8_t* start = obj->buffer;\ + start += slave * LOCAL_OBJECT_SIZE(obj->object_size); \ + triple_buffer_object_t* tb = (triple_buffer_object_t*)start; \ + return (type*)triple_buffer_begin_write_internal(sizeof(type) + LOCAL_OBJECT_EXTRA, tb); \ + }\ + void end_write_##name(uint8_t slave) { \ + remote_object_t* obj = (remote_object_t*)&remote_object_##name; \ + uint8_t* start = obj->buffer;\ + start += slave * LOCAL_OBJECT_SIZE(obj->object_size); \ + triple_buffer_object_t* tb = (triple_buffer_object_t*)start; \ + triple_buffer_end_write_internal(tb); \ + signal_data_written(); \ + }\ + type* read_##name() { \ + remote_object_t* obj = (remote_object_t*)&remote_object_##name; \ + uint8_t* start = obj->buffer + NUM_SLAVES * LOCAL_OBJECT_SIZE(obj->object_size);\ + triple_buffer_object_t* tb = (triple_buffer_object_t*)start; \ + return triple_buffer_read_internal(obj->object_size, tb); \ + } + +#define SLAVE_TO_MASTER_OBJECT(name, type) \ + REMOTE_OBJECT_HELPER(name, type, 1, NUM_SLAVES) \ + remote_object_##name##_t remote_object_##name = { \ + .object = { \ + .object_type = SLAVE_TO_MASTER, \ + .object_size = sizeof(type), \ + } \ + }; \ + type* begin_write_##name(void) { \ + remote_object_t* obj = (remote_object_t*)&remote_object_##name; \ + triple_buffer_object_t* tb = (triple_buffer_object_t*)obj->buffer; \ + return (type*)triple_buffer_begin_write_internal(sizeof(type) + LOCAL_OBJECT_EXTRA, tb); \ + }\ + void end_write_##name(void) { \ + remote_object_t* obj = (remote_object_t*)&remote_object_##name; \ + triple_buffer_object_t* tb = (triple_buffer_object_t*)obj->buffer; \ + triple_buffer_end_write_internal(tb); \ + signal_data_written(); \ + }\ + type* read_##name(uint8_t slave) { \ + remote_object_t* obj = (remote_object_t*)&remote_object_##name; \ + uint8_t* start = obj->buffer + LOCAL_OBJECT_SIZE(obj->object_size);\ + start+=slave * REMOTE_OBJECT_SIZE(obj->object_size); \ + triple_buffer_object_t* tb = (triple_buffer_object_t*)start; \ + return triple_buffer_read_internal(obj->object_size, tb); \ + } + +#define REMOTE_OBJECT(name) (remote_object_t*)&remote_object_##name + +void add_remote_objects(remote_object_t** remote_objects, uint32_t num_remote_objects); +void transport_recv_frame(uint8_t from, uint8_t* data, uint16_t size); +void update_transport(void); + +#endif diff --git a/quantum/serial_link/protocol/triple_buffered_object.c b/quantum/serial_link/protocol/triple_buffered_object.c new file mode 100644 index 000000000..e3e8989d3 --- /dev/null +++ b/quantum/serial_link/protocol/triple_buffered_object.c @@ -0,0 +1,78 @@ +/* +The MIT License (MIT) + +Copyright (c) 2016 Fred Sundvik + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. +*/ + +#include "serial_link/protocol/triple_buffered_object.h" +#include "serial_link/system/serial_link.h" +#include +#include + +#define GET_READ_INDEX() object->state & 3 +#define GET_WRITE_INDEX() (object->state >> 2) & 3 +#define GET_SHARED_INDEX() (object->state >> 4) & 3 +#define GET_DATA_AVAILABLE() (object->state >> 6) & 1 + +#define SET_READ_INDEX(i) object->state = ((object->state & ~3) | i) +#define SET_WRITE_INDEX(i) object->state = ((object->state & ~(3 << 2)) | (i << 2)) +#define SET_SHARED_INDEX(i) object->state = ((object->state & ~(3 << 4)) | (i << 4)) +#define SET_DATA_AVAILABLE(i) object->state = ((object->state & ~(1 << 6)) | (i << 6)) + +void triple_buffer_init(triple_buffer_object_t* object) { + object->state = 0; + SET_WRITE_INDEX(0); + SET_READ_INDEX(1); + SET_SHARED_INDEX(2); + SET_DATA_AVAILABLE(0); +} + +void* triple_buffer_read_internal(uint16_t object_size, triple_buffer_object_t* object) { + serial_link_lock(); + if (GET_DATA_AVAILABLE()) { + uint8_t shared_index = GET_SHARED_INDEX(); + uint8_t read_index = GET_READ_INDEX(); + SET_READ_INDEX(shared_index); + SET_SHARED_INDEX(read_index); + SET_DATA_AVAILABLE(false); + serial_link_unlock(); + return object->buffer + object_size * shared_index; + } + else { + serial_link_unlock(); + return NULL; + } +} + +void* triple_buffer_begin_write_internal(uint16_t object_size, triple_buffer_object_t* object) { + uint8_t write_index = GET_WRITE_INDEX(); + return object->buffer + object_size * write_index; +} + +void triple_buffer_end_write_internal(triple_buffer_object_t* object) { + serial_link_lock(); + uint8_t shared_index = GET_SHARED_INDEX(); + uint8_t write_index = GET_WRITE_INDEX(); + SET_SHARED_INDEX(write_index); + SET_WRITE_INDEX(shared_index); + SET_DATA_AVAILABLE(true); + serial_link_unlock(); +} diff --git a/quantum/serial_link/protocol/triple_buffered_object.h b/quantum/serial_link/protocol/triple_buffered_object.h new file mode 100644 index 000000000..2e57db3f5 --- /dev/null +++ b/quantum/serial_link/protocol/triple_buffered_object.h @@ -0,0 +1,51 @@ +/* +The MIT License (MIT) + +Copyright (c) 2016 Fred Sundvik + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. +*/ + +#ifndef SERIAL_LINK_TRIPLE_BUFFERED_OBJECT_H +#define SERIAL_LINK_TRIPLE_BUFFERED_OBJECT_H + +#include + +typedef struct { + uint8_t state; + uint8_t buffer[] __attribute__((aligned(4))); +}triple_buffer_object_t; + +void triple_buffer_init(triple_buffer_object_t* object); + +#define triple_buffer_begin_write(object) \ + (typeof(*object.buffer[0])*)triple_buffer_begin_write_internal(sizeof(*object.buffer[0]), (triple_buffer_object_t*)object) + +#define triple_buffer_end_write(object) \ + triple_buffer_end_write_internal((triple_buffer_object_t*)object) + +#define triple_buffer_read(object) \ + (typeof(*object.buffer[0])*)triple_buffer_read_internal(sizeof(*object.buffer[0]), (triple_buffer_object_t*)object) + +void* triple_buffer_begin_write_internal(uint16_t object_size, triple_buffer_object_t* object); +void triple_buffer_end_write_internal(triple_buffer_object_t* object); +void* triple_buffer_read_internal(uint16_t object_size, triple_buffer_object_t* object); + + +#endif diff --git a/quantum/serial_link/system/serial_link.c b/quantum/serial_link/system/serial_link.c new file mode 100644 index 000000000..75c7e77a7 --- /dev/null +++ b/quantum/serial_link/system/serial_link.c @@ -0,0 +1,265 @@ +/* +The MIT License (MIT) + +Copyright (c) 2016 Fred Sundvik + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. +*/ +#include "report.h" +#include "host_driver.h" +#include "serial_link/system/serial_link.h" +#include "hal.h" +#include "serial_link/protocol/byte_stuffer.h" +#include "serial_link/protocol/transport.h" +#include "serial_link/protocol/frame_router.h" +#include "matrix.h" +#include +#include "print.h" +#include "config.h" + +static event_source_t new_data_event; +static bool serial_link_connected; +static bool is_master = false; + +static uint8_t keyboard_leds(void); +static void send_keyboard(report_keyboard_t *report); +static void send_mouse(report_mouse_t *report); +static void send_system(uint16_t data); +static void send_consumer(uint16_t data); + +host_driver_t serial_driver = { + keyboard_leds, + send_keyboard, + send_mouse, + send_system, + send_consumer +}; + +// Define these in your Config.h file +#ifndef SERIAL_LINK_BAUD +#error "Serial link baud is not set" +#endif + +#ifndef SERIAL_LINK_THREAD_PRIORITY +#error "Serial link thread priority not set" +#endif + +static SerialConfig config = { + .sc_speed = SERIAL_LINK_BAUD +}; + +//#define DEBUG_LINK_ERRORS + +static uint32_t read_from_serial(SerialDriver* driver, uint8_t link) { + const uint32_t buffer_size = 16; + uint8_t buffer[buffer_size]; + uint32_t bytes_read = sdAsynchronousRead(driver, buffer, buffer_size); + uint8_t* current = buffer; + uint8_t* end = current + bytes_read; + while(current < end) { + byte_stuffer_recv_byte(link, *current); + current++; + } + return bytes_read; +} + +static void print_error(char* str, eventflags_t flags, SerialDriver* driver) { +#ifdef DEBUG_LINK_ERRORS + if (flags & SD_PARITY_ERROR) { + print(str); + print(" Parity error\n"); + } + if (flags & SD_FRAMING_ERROR) { + print(str); + print(" Framing error\n"); + } + if (flags & SD_OVERRUN_ERROR) { + print(str); + uint32_t size = qSpaceI(&(driver->iqueue)); + xprintf(" Overrun error, queue size %d\n", size); + + } + if (flags & SD_NOISE_ERROR) { + print(str); + print(" Noise error\n"); + } + if (flags & SD_BREAK_DETECTED) { + print(str); + print(" Break detected\n"); + } +#else + (void)str; + (void)flags; + (void)driver; +#endif +} + +bool is_serial_link_master(void) { + return is_master; +} + +// TODO: Optimize the stack size, this is probably way too big +static THD_WORKING_AREA(serialThreadStack, 1024); +static THD_FUNCTION(serialThread, arg) { + (void)arg; + event_listener_t new_data_listener; + event_listener_t sd1_listener; + event_listener_t sd2_listener; + chEvtRegister(&new_data_event, &new_data_listener, 0); + eventflags_t events = CHN_INPUT_AVAILABLE + | SD_PARITY_ERROR | SD_FRAMING_ERROR | SD_OVERRUN_ERROR | SD_NOISE_ERROR | SD_BREAK_DETECTED; + chEvtRegisterMaskWithFlags(chnGetEventSource(&SD1), + &sd1_listener, + EVENT_MASK(1), + events); + chEvtRegisterMaskWithFlags(chnGetEventSource(&SD2), + &sd2_listener, + EVENT_MASK(2), + events); + bool need_wait = false; + while(true) { + eventflags_t flags1 = 0; + eventflags_t flags2 = 0; + if (need_wait) { + eventmask_t mask = chEvtWaitAnyTimeout(ALL_EVENTS, MS2ST(1000)); + if (mask & EVENT_MASK(1)) { + flags1 = chEvtGetAndClearFlags(&sd1_listener); + print_error("DOWNLINK", flags1, &SD1); + } + if (mask & EVENT_MASK(2)) { + flags2 = chEvtGetAndClearFlags(&sd2_listener); + print_error("UPLINK", flags2, &SD2); + } + } + + // Always stay as master, even if the USB goes into sleep mode + is_master |= usbGetDriverStateI(&USBD1) == USB_ACTIVE; + router_set_master(is_master); + + need_wait = true; + need_wait &= read_from_serial(&SD2, UP_LINK) == 0; + need_wait &= read_from_serial(&SD1, DOWN_LINK) == 0; + update_transport(); + } +} + +void send_data(uint8_t link, const uint8_t* data, uint16_t size) { + if (link == DOWN_LINK) { + sdWrite(&SD1, data, size); + } + else { + sdWrite(&SD2, data, size); + } +} + +static systime_t last_update = 0; + +typedef struct { + matrix_row_t rows[MATRIX_ROWS]; +} matrix_object_t; + +static matrix_object_t last_matrix = {}; + +SLAVE_TO_MASTER_OBJECT(keyboard_matrix, matrix_object_t); +MASTER_TO_ALL_SLAVES_OBJECT(serial_link_connected, bool); + +static remote_object_t* remote_objects[] = { + REMOTE_OBJECT(serial_link_connected), + REMOTE_OBJECT(keyboard_matrix), +}; + +void init_serial_link(void) { + serial_link_connected = false; + init_serial_link_hal(); + add_remote_objects(remote_objects, sizeof(remote_objects)/sizeof(remote_object_t*)); + init_byte_stuffer(); + sdStart(&SD1, &config); + sdStart(&SD2, &config); + chEvtObjectInit(&new_data_event); + (void)chThdCreateStatic(serialThreadStack, sizeof(serialThreadStack), + SERIAL_LINK_THREAD_PRIORITY, serialThread, NULL); +} + +void matrix_set_remote(matrix_row_t* rows, uint8_t index); + +void serial_link_update(void) { + if (read_serial_link_connected()) { + serial_link_connected = true; + } + + matrix_object_t matrix; + bool changed = false; + for(uint8_t i=0;i US2ST(1000)) { + last_update = current_time; + last_matrix = matrix; + matrix_object_t* m = begin_write_keyboard_matrix(); + for(uint8_t i=0;irows[i] = matrix.rows[i]; + } + end_write_keyboard_matrix(); + *begin_write_serial_link_connected() = true; + end_write_serial_link_connected(); + } + + matrix_object_t* m = read_keyboard_matrix(0); + if (m) { + matrix_set_remote(m->rows, 0); + } +} + +void signal_data_written(void) { + chEvtBroadcast(&new_data_event); +} + +bool is_serial_link_connected(void) { + return serial_link_connected; +} + +host_driver_t* get_serial_link_driver(void) { + return &serial_driver; +} + +// NOTE: The driver does nothing, because the master handles everything +uint8_t keyboard_leds(void) { + return 0; +} + +void send_keyboard(report_keyboard_t *report) { + (void)report; +} + +void send_mouse(report_mouse_t *report) { + (void)report; +} + +void send_system(uint16_t data) { + (void)data; +} + +void send_consumer(uint16_t data) { + (void)data; +} + diff --git a/quantum/serial_link/system/serial_link.h b/quantum/serial_link/system/serial_link.h new file mode 100644 index 000000000..351e03877 --- /dev/null +++ b/quantum/serial_link/system/serial_link.h @@ -0,0 +1,63 @@ +/* +The MIT License (MIT) + +Copyright (c) 2016 Fred Sundvik + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. +*/ + +#ifndef SERIAL_LINK_H +#define SERIAL_LINK_H + +#include "host_driver.h" +#include + +void init_serial_link(void); +void init_serial_link_hal(void); +bool is_serial_link_connected(void); +bool is_serial_link_master(void); +host_driver_t* get_serial_link_driver(void); +void serial_link_update(void); + +#if defined(PROTOCOL_CHIBIOS) +#include "ch.h" + +static inline void serial_link_lock(void) { + chSysLock(); +} + +static inline void serial_link_unlock(void) { + chSysUnlock(); +} + +void signal_data_written(void); + +#else + +inline void serial_link_lock(void) { +} + +inline void serial_link_unlock(void) { +} + +void signal_data_written(void); + +#endif + +#endif diff --git a/quantum/serial_link/tests/Makefile b/quantum/serial_link/tests/Makefile new file mode 100644 index 000000000..1b072c6f1 --- /dev/null +++ b/quantum/serial_link/tests/Makefile @@ -0,0 +1,61 @@ +# The MIT License (MIT) +# +# Copyright (c) 2016 Fred Sundvik +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to deal +# in the Software without restriction, including without limitation the rights +# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +# copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in all +# copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +# SOFTWARE. + +CC = gcc +CFLAGS = +INCLUDES = -I. -I../../ +LDFLAGS = -L$(BUILDDIR)/cgreen/build-c/src -shared +LDLIBS = -lcgreen +UNITOBJ = $(BUILDDIR)/serialtest/unitobj +DEPDIR = $(BUILDDIR)/serialtest/unit.d +UNITTESTS = $(BUILDDIR)/serialtest/unittests +DEPFLAGS = -MT $@ -MMD -MP -MF $(DEPDIR)/$*.Td +EXT = .so +UNAME := $(shell uname) +ifneq (, $(findstring MINGW, $(UNAME))) + EXT = .dll +endif +ifneq (, $(findstring CYGWIN, $(UNAME))) + EXT = .dll +endif + +SRC = $(wildcard *.c) +TESTFILES = $(patsubst %.c, $(UNITTESTS)/%$(EXT), $(SRC)) +$(shell mkdir -p $(DEPDIR) >/dev/null) + +test: $(TESTFILES) + @$(BUILDDIR)/cgreen/build-c/tools/cgreen-runner --color $(TESTFILES) + +$(UNITTESTS)/%$(EXT): $(UNITOBJ)/%.o + @mkdir -p $(UNITTESTS) + $(CC) $(LDFLAGS) -o $@ $^ $(LDLIBS) + +$(UNITOBJ)/%.o : %.c +$(UNITOBJ)/%.o: %.c $(DEPDIR)/%.d + @mkdir -p $(UNITOBJ) + $(CC) $(CFLAGS) $(DEPFLAGS) $(INCLUDES) -c $< -o $@ + @mv -f $(DEPDIR)/$*.Td $(DEPDIR)/$*.d + +$(DEPDIR)/%.d: ; +.PRECIOUS: $(DEPDIR)/%.d + +-include $(patsubst %,$(DEPDIR)/%.d,$(basename $(SRC))) \ No newline at end of file diff --git a/quantum/serial_link/tests/byte_stuffer_tests.c b/quantum/serial_link/tests/byte_stuffer_tests.c new file mode 100644 index 000000000..64b170e8c --- /dev/null +++ b/quantum/serial_link/tests/byte_stuffer_tests.c @@ -0,0 +1,506 @@ +/* +The MIT License (MIT) + +Copyright (c) 2016 Fred Sundvik + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. +*/ + +#include +#include +#include "serial_link/protocol/byte_stuffer.h" +#include "serial_link/protocol/byte_stuffer.c" +#include "serial_link/protocol/frame_validator.h" +#include "serial_link/protocol/physical.h" + +static uint8_t sent_data[MAX_FRAME_SIZE*2]; +static uint16_t sent_data_size; + +Describe(ByteStuffer); +BeforeEach(ByteStuffer) { + init_byte_stuffer(); + sent_data_size = 0; +} +AfterEach(ByteStuffer) {} + +void validator_recv_frame(uint8_t link, uint8_t* data, uint16_t size) { + mock(data, size); +} + +void send_data(uint8_t link, const uint8_t* data, uint16_t size) { + memcpy(sent_data + sent_data_size, data, size); + sent_data_size += size; +} + +Ensure(ByteStuffer, receives_no_frame_for_a_single_zero_byte) { + never_expect(validator_recv_frame); + byte_stuffer_recv_byte(0, 0); +} + +Ensure(ByteStuffer, receives_no_frame_for_a_single_FF_byte) { + never_expect(validator_recv_frame); + byte_stuffer_recv_byte(0, 0xFF); +} + +Ensure(ByteStuffer, receives_no_frame_for_a_single_random_byte) { + never_expect(validator_recv_frame); + byte_stuffer_recv_byte(0, 0x4A); +} + +Ensure(ByteStuffer, receives_no_frame_for_a_zero_length_frame) { + never_expect(validator_recv_frame); + byte_stuffer_recv_byte(0, 1); + byte_stuffer_recv_byte(0, 0); +} + +Ensure(ByteStuffer, receives_single_byte_valid_frame) { + uint8_t expected[] = {0x37}; + expect(validator_recv_frame, + when(size, is_equal_to(1)), + when(data, is_equal_to_contents_of(expected, 1)) + ); + byte_stuffer_recv_byte(0, 2); + byte_stuffer_recv_byte(0, 0x37); + byte_stuffer_recv_byte(0, 0); +} + +Ensure(ByteStuffer, receives_three_bytes_valid_frame) { + uint8_t expected[] = {0x37, 0x99, 0xFF}; + expect(validator_recv_frame, + when(size, is_equal_to(3)), + when(data, is_equal_to_contents_of(expected, 3)) + ); + byte_stuffer_recv_byte(0, 4); + byte_stuffer_recv_byte(0, 0x37); + byte_stuffer_recv_byte(0, 0x99); + byte_stuffer_recv_byte(0, 0xFF); + byte_stuffer_recv_byte(0, 0); +} + +Ensure(ByteStuffer, receives_single_zero_valid_frame) { + uint8_t expected[] = {0}; + expect(validator_recv_frame, + when(size, is_equal_to(1)), + when(data, is_equal_to_contents_of(expected, 1)) + ); + byte_stuffer_recv_byte(0, 1); + byte_stuffer_recv_byte(0, 1); + byte_stuffer_recv_byte(0, 0); +} + +Ensure(ByteStuffer, receives_valid_frame_with_zeroes) { + uint8_t expected[] = {5, 0, 3, 0}; + expect(validator_recv_frame, + when(size, is_equal_to(4)), + when(data, is_equal_to_contents_of(expected, 4)) + ); + byte_stuffer_recv_byte(0, 2); + byte_stuffer_recv_byte(0, 5); + byte_stuffer_recv_byte(0, 2); + byte_stuffer_recv_byte(0, 3); + byte_stuffer_recv_byte(0, 1); + byte_stuffer_recv_byte(0, 0); +} + +Ensure(ByteStuffer, receives_two_valid_frames) { + uint8_t expected1[] = {5, 0}; + uint8_t expected2[] = {3}; + expect(validator_recv_frame, + when(size, is_equal_to(2)), + when(data, is_equal_to_contents_of(expected1, 2)) + ); + expect(validator_recv_frame, + when(size, is_equal_to(1)), + when(data, is_equal_to_contents_of(expected2, 1)) + ); + byte_stuffer_recv_byte(1, 2); + byte_stuffer_recv_byte(1, 5); + byte_stuffer_recv_byte(1, 1); + byte_stuffer_recv_byte(1, 0); + byte_stuffer_recv_byte(1, 2); + byte_stuffer_recv_byte(1, 3); + byte_stuffer_recv_byte(1, 0); +} + +Ensure(ByteStuffer, receives_valid_frame_after_unexpected_zero) { + uint8_t expected[] = {5, 7}; + expect(validator_recv_frame, + when(size, is_equal_to(2)), + when(data, is_equal_to_contents_of(expected, 2)) + ); + byte_stuffer_recv_byte(1, 3); + byte_stuffer_recv_byte(1, 1); + byte_stuffer_recv_byte(1, 0); + byte_stuffer_recv_byte(1, 3); + byte_stuffer_recv_byte(1, 5); + byte_stuffer_recv_byte(1, 7); + byte_stuffer_recv_byte(1, 0); +} + +Ensure(ByteStuffer, receives_valid_frame_after_unexpected_non_zero) { + uint8_t expected[] = {5, 7}; + expect(validator_recv_frame, + when(size, is_equal_to(2)), + when(data, is_equal_to_contents_of(expected, 2)) + ); + byte_stuffer_recv_byte(0, 2); + byte_stuffer_recv_byte(0, 9); + byte_stuffer_recv_byte(0, 4); // This should have been zero + byte_stuffer_recv_byte(0, 0); + byte_stuffer_recv_byte(0, 3); + byte_stuffer_recv_byte(0, 5); + byte_stuffer_recv_byte(0, 7); + byte_stuffer_recv_byte(0, 0); +} + +Ensure(ByteStuffer, receives_a_valid_frame_with_over254_non_zeroes_and_then_end_of_frame) { + uint8_t expected[254]; + int i; + for (i=0;i<254;i++) { + expected[i] = i + 1; + } + expect(validator_recv_frame, + when(size, is_equal_to(254)), + when(data, is_equal_to_contents_of(expected, 254)) + ); + byte_stuffer_recv_byte(0, 0xFF); + for (i=0;i<254;i++) { + byte_stuffer_recv_byte(0, i+1); + } + byte_stuffer_recv_byte(0, 0); +} + +Ensure(ByteStuffer, receives_a_valid_frame_with_over254_non_zeroes_next_byte_is_non_zero) { + uint8_t expected[255]; + int i; + for (i=0;i<254;i++) { + expected[i] = i + 1; + } + expected[254] = 7; + expect(validator_recv_frame, + when(size, is_equal_to(255)), + when(data, is_equal_to_contents_of(expected, 255)) + ); + byte_stuffer_recv_byte(0, 0xFF); + for (i=0;i<254;i++) { + byte_stuffer_recv_byte(0, i+1); + } + byte_stuffer_recv_byte(0, 2); + byte_stuffer_recv_byte(0, 7); + byte_stuffer_recv_byte(0, 0); +} + +Ensure(ByteStuffer, receives_a_valid_frame_with_over254_non_zeroes_next_byte_is_zero) { + uint8_t expected[255]; + int i; + for (i=0;i<254;i++) { + expected[i] = i + 1; + } + expected[254] = 0; + expect(validator_recv_frame, + when(size, is_equal_to(255)), + when(data, is_equal_to_contents_of(expected, 255)) + ); + byte_stuffer_recv_byte(0, 0xFF); + for (i=0;i<254;i++) { + byte_stuffer_recv_byte(0, i+1); + } + byte_stuffer_recv_byte(0, 1); + byte_stuffer_recv_byte(0, 1); + byte_stuffer_recv_byte(0, 0); +} + +Ensure(ByteStuffer, receives_two_long_frames_and_some_more) { + uint8_t expected[515]; + int i; + int j; + for (j=0;j<2;j++) { + for (i=0;i<254;i++) { + expected[i+254*j] = i + 1; + } + } + for (i=0;i<7;i++) { + expected[254*2+i] = i + 1; + } + expect(validator_recv_frame, + when(size, is_equal_to(515)), + when(data, is_equal_to_contents_of(expected, 510)) + ); + byte_stuffer_recv_byte(0, 0xFF); + for (i=0;i<254;i++) { + byte_stuffer_recv_byte(0, i+1); + } + byte_stuffer_recv_byte(0, 0xFF); + for (i=0;i<254;i++) { + byte_stuffer_recv_byte(0, i+1); + } + byte_stuffer_recv_byte(0, 8); + byte_stuffer_recv_byte(0, 1); + byte_stuffer_recv_byte(0, 2); + byte_stuffer_recv_byte(0, 3); + byte_stuffer_recv_byte(0, 4); + byte_stuffer_recv_byte(0, 5); + byte_stuffer_recv_byte(0, 6); + byte_stuffer_recv_byte(0, 7); + byte_stuffer_recv_byte(0, 0); +} + +Ensure(ByteStuffer, receives_an_all_zeros_frame_that_is_maximum_size) { + uint8_t expected[MAX_FRAME_SIZE] = {}; + expect(validator_recv_frame, + when(size, is_equal_to(MAX_FRAME_SIZE)), + when(data, is_equal_to_contents_of(expected, MAX_FRAME_SIZE)) + ); + int i; + byte_stuffer_recv_byte(0, 1); + for(i=0;i +#include +#include "serial_link/protocol/byte_stuffer.c" +#include "serial_link/protocol/frame_validator.c" +#include "serial_link/protocol/frame_router.c" +#include "serial_link/protocol/transport.h" + +static uint8_t received_data[256]; +static uint16_t received_data_size; + +typedef struct { + uint8_t sent_data[256]; + uint16_t sent_data_size; +} receive_buffer_t; + +typedef struct { + receive_buffer_t send_buffers[2]; +} router_buffer_t; + +router_buffer_t router_buffers[8]; + +router_buffer_t* current_router_buffer; + + +Describe(FrameRouter); +BeforeEach(FrameRouter) { + init_byte_stuffer(); + memset(router_buffers, 0, sizeof(router_buffers)); + current_router_buffer = 0; +} +AfterEach(FrameRouter) {} + +typedef struct { + uint32_t data; + uint8_t extra[16]; +} frame_buffer_t; + + +void send_data(uint8_t link, const uint8_t* data, uint16_t size) { + receive_buffer_t* buffer = ¤t_router_buffer->send_buffers[link]; + memcpy(buffer->sent_data + buffer->sent_data_size, data, size); + buffer->sent_data_size += size; +} + +static void receive_data(uint8_t link, uint8_t* data, uint16_t size) { + int i; + for(i=0;i to) { + receive_data(DOWN_LINK, + router_buffers[from].send_buffers[UP_LINK].sent_data, + router_buffers[from].send_buffers[UP_LINK].sent_data_size); + } + else if(to > from) { + receive_data(UP_LINK, + router_buffers[from].send_buffers[DOWN_LINK].sent_data, + router_buffers[from].send_buffers[DOWN_LINK].sent_data_size); + } +} + +void transport_recv_frame(uint8_t from, uint8_t* data, uint16_t size) { + mock(from, data, size); +} + + +Ensure(FrameRouter, master_broadcast_is_received_by_everyone) { + frame_buffer_t data; + data.data = 0xAB7055BB; + activate_router(0); + router_send_frame(0xFF, (uint8_t*)&data, 4); + assert_that(router_buffers[0].send_buffers[DOWN_LINK].sent_data_size, is_greater_than(0)); + assert_that(router_buffers[0].send_buffers[UP_LINK].sent_data_size, is_equal_to(0)); + + expect(transport_recv_frame, + when(from, is_equal_to(0)), + when(size, is_equal_to(4)), + when(data, is_equal_to_contents_of(&data.data, 4)) + ); + simulate_transport(0, 1); + assert_that(router_buffers[1].send_buffers[DOWN_LINK].sent_data_size, is_greater_than(0)); + assert_that(router_buffers[1].send_buffers[UP_LINK].sent_data_size, is_equal_to(0)); + + expect(transport_recv_frame, + when(from, is_equal_to(0)), + when(size, is_equal_to(4)), + when(data, is_equal_to_contents_of(&data.data, 4)) + ); + simulate_transport(1, 2); + assert_that(router_buffers[2].send_buffers[DOWN_LINK].sent_data_size, is_greater_than(0)); + assert_that(router_buffers[2].send_buffers[UP_LINK].sent_data_size, is_equal_to(0)); +} + +Ensure(FrameRouter, master_send_is_received_by_targets) { + frame_buffer_t data; + data.data = 0xAB7055BB; + activate_router(0); + router_send_frame((1 << 1) | (1 << 2), (uint8_t*)&data, 4); + assert_that(router_buffers[0].send_buffers[DOWN_LINK].sent_data_size, is_greater_than(0)); + assert_that(router_buffers[0].send_buffers[UP_LINK].sent_data_size, is_equal_to(0)); + + simulate_transport(0, 1); + assert_that(router_buffers[1].send_buffers[DOWN_LINK].sent_data_size, is_greater_than(0)); + assert_that(router_buffers[1].send_buffers[UP_LINK].sent_data_size, is_equal_to(0)); + + expect(transport_recv_frame, + when(from, is_equal_to(0)), + when(size, is_equal_to(4)), + when(data, is_equal_to_contents_of(&data.data, 4)) + ); + simulate_transport(1, 2); + assert_that(router_buffers[2].send_buffers[DOWN_LINK].sent_data_size, is_greater_than(0)); + assert_that(router_buffers[2].send_buffers[UP_LINK].sent_data_size, is_equal_to(0)); + + expect(transport_recv_frame, + when(from, is_equal_to(0)), + when(size, is_equal_to(4)), + when(data, is_equal_to_contents_of(&data.data, 4)) + ); + simulate_transport(2, 3); + assert_that(router_buffers[3].send_buffers[DOWN_LINK].sent_data_size, is_greater_than(0)); + assert_that(router_buffers[3].send_buffers[UP_LINK].sent_data_size, is_equal_to(0)); +} + +Ensure(FrameRouter, first_link_sends_to_master) { + frame_buffer_t data; + data.data = 0xAB7055BB; + activate_router(1); + router_send_frame(0, (uint8_t*)&data, 4); + assert_that(router_buffers[1].send_buffers[UP_LINK].sent_data_size, is_greater_than(0)); + assert_that(router_buffers[1].send_buffers[DOWN_LINK].sent_data_size, is_equal_to(0)); + + expect(transport_recv_frame, + when(from, is_equal_to(1)), + when(size, is_equal_to(4)), + when(data, is_equal_to_contents_of(&data.data, 4)) + ); + simulate_transport(1, 0); + assert_that(router_buffers[0].send_buffers[DOWN_LINK].sent_data_size, is_equal_to(0)); + assert_that(router_buffers[0].send_buffers[UP_LINK].sent_data_size, is_equal_to(0)); +} + +Ensure(FrameRouter, second_link_sends_to_master) { + frame_buffer_t data; + data.data = 0xAB7055BB; + activate_router(2); + router_send_frame(0, (uint8_t*)&data, 4); + assert_that(router_buffers[2].send_buffers[UP_LINK].sent_data_size, is_greater_than(0)); + assert_that(router_buffers[2].send_buffers[DOWN_LINK].sent_data_size, is_equal_to(0)); + + simulate_transport(2, 1); + assert_that(router_buffers[1].send_buffers[UP_LINK].sent_data_size, is_greater_than(0)); + assert_that(router_buffers[1].send_buffers[DOWN_LINK].sent_data_size, is_equal_to(0)); + + expect(transport_recv_frame, + when(from, is_equal_to(2)), + when(size, is_equal_to(4)), + when(data, is_equal_to_contents_of(&data.data, 4)) + ); + simulate_transport(1, 0); + assert_that(router_buffers[0].send_buffers[DOWN_LINK].sent_data_size, is_equal_to(0)); + assert_that(router_buffers[0].send_buffers[UP_LINK].sent_data_size, is_equal_to(0)); +} + +Ensure(FrameRouter, master_sends_to_master_does_nothing) { + frame_buffer_t data; + data.data = 0xAB7055BB; + activate_router(0); + router_send_frame(0, (uint8_t*)&data, 4); + assert_that(router_buffers[0].send_buffers[UP_LINK].sent_data_size, is_equal_to(0)); + assert_that(router_buffers[0].send_buffers[DOWN_LINK].sent_data_size, is_equal_to(0)); +} + +Ensure(FrameRouter, link_sends_to_other_link_does_nothing) { + frame_buffer_t data; + data.data = 0xAB7055BB; + activate_router(1); + router_send_frame(2, (uint8_t*)&data, 4); + assert_that(router_buffers[1].send_buffers[UP_LINK].sent_data_size, is_equal_to(0)); + assert_that(router_buffers[1].send_buffers[DOWN_LINK].sent_data_size, is_equal_to(0)); +} + +Ensure(FrameRouter, master_receives_on_uplink_does_nothing) { + frame_buffer_t data; + data.data = 0xAB7055BB; + activate_router(1); + router_send_frame(0, (uint8_t*)&data, 4); + assert_that(router_buffers[1].send_buffers[UP_LINK].sent_data_size, is_greater_than(0)); + assert_that(router_buffers[1].send_buffers[DOWN_LINK].sent_data_size, is_equal_to(0)); + + never_expect(transport_recv_frame); + activate_router(0); + receive_data(UP_LINK, + router_buffers[1].send_buffers[UP_LINK].sent_data, + router_buffers[1].send_buffers[UP_LINK].sent_data_size); + assert_that(router_buffers[0].send_buffers[UP_LINK].sent_data_size, is_equal_to(0)); + assert_that(router_buffers[0].send_buffers[DOWN_LINK].sent_data_size, is_equal_to(0)); +} diff --git a/quantum/serial_link/tests/frame_validator_tests.c b/quantum/serial_link/tests/frame_validator_tests.c new file mode 100644 index 000000000..d20947e2c --- /dev/null +++ b/quantum/serial_link/tests/frame_validator_tests.c @@ -0,0 +1,101 @@ +/* +The MIT License (MIT) + +Copyright (c) 2016 Fred Sundvik + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. +*/ + +#include +#include +#include "serial_link/protocol/frame_validator.c" + +void route_incoming_frame(uint8_t link, uint8_t* data, uint16_t size) { + mock(data, size); +} + +void byte_stuffer_send_frame(uint8_t link, uint8_t* data, uint16_t size) { + mock(data, size); +} + +Describe(FrameValidator); +BeforeEach(FrameValidator) {} +AfterEach(FrameValidator) {} + +Ensure(FrameValidator, doesnt_validate_frames_under_5_bytes) { + never_expect(route_incoming_frame); + uint8_t data[] = {1, 2}; + validator_recv_frame(0, 0, 1); + validator_recv_frame(0, data, 2); + validator_recv_frame(0, data, 3); + validator_recv_frame(0, data, 4); +} + +Ensure(FrameValidator, validates_one_byte_frame_with_correct_crc) { + uint8_t data[] = {0x44, 0x04, 0x6A, 0xB3, 0xA3}; + expect(route_incoming_frame, + when(size, is_equal_to(1)), + when(data, is_equal_to_contents_of(data, 1)) + ); + validator_recv_frame(0, data, 5); +} + +Ensure(FrameValidator, does_not_validate_one_byte_frame_with_incorrect_crc) { + uint8_t data[] = {0x44, 0, 0, 0, 0}; + never_expect(route_incoming_frame); + validator_recv_frame(1, data, 5); +} + +Ensure(FrameValidator, validates_four_byte_frame_with_correct_crc) { + uint8_t data[] = {0x44, 0x10, 0xFF, 0x00, 0x74, 0x4E, 0x30, 0xBA}; + expect(route_incoming_frame, + when(size, is_equal_to(4)), + when(data, is_equal_to_contents_of(data, 4)) + ); + validator_recv_frame(1, data, 8); +} + +Ensure(FrameValidator, validates_five_byte_frame_with_correct_crc) { + uint8_t data[] = {1, 2, 3, 4, 5, 0xF4, 0x99, 0x0B, 0x47}; + expect(route_incoming_frame, + when(size, is_equal_to(5)), + when(data, is_equal_to_contents_of(data, 5)) + ); + validator_recv_frame(0, data, 9); +} + +Ensure(FrameValidator, sends_one_byte_with_correct_crc) { + uint8_t original[] = {0x44, 0, 0, 0, 0}; + uint8_t expected[] = {0x44, 0x04, 0x6A, 0xB3, 0xA3}; + expect(byte_stuffer_send_frame, + when(size, is_equal_to(sizeof(expected))), + when(data, is_equal_to_contents_of(expected, sizeof(expected))) + ); + validator_send_frame(0, original, 1); +} + +Ensure(FrameValidator, sends_five_bytes_with_correct_crc) { + uint8_t original[] = {1, 2, 3, 4, 5, 0, 0, 0, 0}; + uint8_t expected[] = {1, 2, 3, 4, 5, 0xF4, 0x99, 0x0B, 0x47}; + expect(byte_stuffer_send_frame, + when(size, is_equal_to(sizeof(expected))), + when(data, is_equal_to_contents_of(expected, sizeof(expected))) + ); + validator_send_frame(0, original, 5); +} diff --git a/quantum/serial_link/tests/transport_tests.c b/quantum/serial_link/tests/transport_tests.c new file mode 100644 index 000000000..358e1b9fd --- /dev/null +++ b/quantum/serial_link/tests/transport_tests.c @@ -0,0 +1,168 @@ +/* +The MIT License (MIT) + +Copyright (c) 2016 Fred Sundvik + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. +*/ + +#include +#include +#include "serial_link/protocol/transport.c" +#include "serial_link/protocol/triple_buffered_object.c" + +void signal_data_written(void) { + mock(); +} + +static uint8_t sent_data[2048]; +static uint16_t sent_data_size; + +void router_send_frame(uint8_t destination, uint8_t* data, uint16_t size) { + mock(destination); + memcpy(sent_data + sent_data_size, data, size); + sent_data_size += size; +} + +typedef struct { + uint32_t test; +} test_object1_t; + +typedef struct { + uint32_t test1; + uint32_t test2; +} test_object2_t; + +MASTER_TO_ALL_SLAVES_OBJECT(master_to_slave, test_object1_t); +MASTER_TO_SINGLE_SLAVE_OBJECT(master_to_single_slave, test_object1_t); +SLAVE_TO_MASTER_OBJECT(slave_to_master, test_object1_t); + +static remote_object_t* test_remote_objects[] = { + REMOTE_OBJECT(master_to_slave), + REMOTE_OBJECT(master_to_single_slave), + REMOTE_OBJECT(slave_to_master), +}; + +Describe(Transport); +BeforeEach(Transport) { + add_remote_objects(test_remote_objects, sizeof(test_remote_objects) / sizeof(remote_object_t*)); + sent_data_size = 0; +} +AfterEach(Transport) {} + +Ensure(Transport, write_to_local_signals_an_event) { + begin_write_master_to_slave(); + expect(signal_data_written); + end_write_master_to_slave(); + begin_write_slave_to_master(); + expect(signal_data_written); + end_write_slave_to_master(); + begin_write_master_to_single_slave(1); + expect(signal_data_written); + end_write_master_to_single_slave(1); +} + +Ensure(Transport, writes_from_master_to_all_slaves) { + update_transport(); + test_object1_t* obj = begin_write_master_to_slave(); + obj->test = 5; + expect(signal_data_written); + end_write_master_to_slave(); + expect(router_send_frame, + when(destination, is_equal_to(0xFF))); + update_transport(); + transport_recv_frame(0, sent_data, sent_data_size); + test_object1_t* obj2 = read_master_to_slave(); + assert_that(obj2, is_not_equal_to(NULL)); + assert_that(obj2->test, is_equal_to(5)); +} + +Ensure(Transport, writes_from_slave_to_master) { + update_transport(); + test_object1_t* obj = begin_write_slave_to_master(); + obj->test = 7; + expect(signal_data_written); + end_write_slave_to_master(); + expect(router_send_frame, + when(destination, is_equal_to(0))); + update_transport(); + transport_recv_frame(3, sent_data, sent_data_size); + test_object1_t* obj2 = read_slave_to_master(2); + assert_that(read_slave_to_master(0), is_equal_to(NULL)); + assert_that(obj2, is_not_equal_to(NULL)); + assert_that(obj2->test, is_equal_to(7)); +} + +Ensure(Transport, writes_from_master_to_single_slave) { + update_transport(); + test_object1_t* obj = begin_write_master_to_single_slave(3); + obj->test = 7; + expect(signal_data_written); + end_write_master_to_single_slave(3); + expect(router_send_frame, + when(destination, is_equal_to(4))); + update_transport(); + transport_recv_frame(0, sent_data, sent_data_size); + test_object1_t* obj2 = read_master_to_single_slave(); + assert_that(obj2, is_not_equal_to(NULL)); + assert_that(obj2->test, is_equal_to(7)); +} + +Ensure(Transport, ignores_object_with_invalid_id) { + update_transport(); + test_object1_t* obj = begin_write_master_to_single_slave(3); + obj->test = 7; + expect(signal_data_written); + end_write_master_to_single_slave(3); + expect(router_send_frame, + when(destination, is_equal_to(4))); + update_transport(); + sent_data[sent_data_size - 1] = 44; + transport_recv_frame(0, sent_data, sent_data_size); + test_object1_t* obj2 = read_master_to_single_slave(); + assert_that(obj2, is_equal_to(NULL)); +} + +Ensure(Transport, ignores_object_with_size_too_small) { + update_transport(); + test_object1_t* obj = begin_write_master_to_slave(); + obj->test = 7; + expect(signal_data_written); + end_write_master_to_slave(); + expect(router_send_frame); + update_transport(); + sent_data[sent_data_size - 2] = 0; + transport_recv_frame(0, sent_data, sent_data_size - 1); + test_object1_t* obj2 = read_master_to_slave(); + assert_that(obj2, is_equal_to(NULL)); +} + +Ensure(Transport, ignores_object_with_size_too_big) { + update_transport(); + test_object1_t* obj = begin_write_master_to_slave(); + obj->test = 7; + expect(signal_data_written); + end_write_master_to_slave(); + expect(router_send_frame); + update_transport(); + sent_data[sent_data_size + 21] = 0; + transport_recv_frame(0, sent_data, sent_data_size + 22); + test_object1_t* obj2 = read_master_to_slave(); + assert_that(obj2, is_equal_to(NULL)); +} diff --git a/quantum/serial_link/tests/triple_buffered_object_tests.c b/quantum/serial_link/tests/triple_buffered_object_tests.c new file mode 100644 index 000000000..6f7c82b46 --- /dev/null +++ b/quantum/serial_link/tests/triple_buffered_object_tests.c @@ -0,0 +1,82 @@ +/* +The MIT License (MIT) + +Copyright (c) 2016 Fred Sundvik + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. +*/ + +#include +#include "serial_link/protocol/triple_buffered_object.c" + +typedef struct { + uint8_t state; + uint32_t buffer[3]; +}test_object_t; + +test_object_t test_object; + +Describe(TripleBufferedObject); +BeforeEach(TripleBufferedObject) { + triple_buffer_init((triple_buffer_object_t*)&test_object); +} +AfterEach(TripleBufferedObject) {} + + +Ensure(TripleBufferedObject, writes_and_reads_object) { + *triple_buffer_begin_write(&test_object) = 0x3456ABCC; + triple_buffer_end_write(&test_object); + assert_that(*triple_buffer_read(&test_object), is_equal_to(0x3456ABCC)); +} + +Ensure(TripleBufferedObject, does_not_read_empty) { + assert_that(triple_buffer_read(&test_object), is_equal_to(NULL)); +} + +Ensure(TripleBufferedObject, writes_twice_and_reads_object) { + *triple_buffer_begin_write(&test_object) = 0x3456ABCC; + triple_buffer_end_write(&test_object); + *triple_buffer_begin_write(&test_object) = 0x44778899; + triple_buffer_end_write(&test_object); + assert_that(*triple_buffer_read(&test_object), is_equal_to(0x44778899)); +} + +Ensure(TripleBufferedObject, performs_another_write_in_the_middle_of_read) { + *triple_buffer_begin_write(&test_object) = 1; + triple_buffer_end_write(&test_object); + uint32_t* read = triple_buffer_read(&test_object); + *triple_buffer_begin_write(&test_object) = 2; + triple_buffer_end_write(&test_object); + assert_that(*read, is_equal_to(1)); + assert_that(*triple_buffer_read(&test_object), is_equal_to(2)); + assert_that(triple_buffer_read(&test_object), is_equal_to(NULL)); +} + +Ensure(TripleBufferedObject, performs_two_writes_in_the_middle_of_read) { + *triple_buffer_begin_write(&test_object) = 1; + triple_buffer_end_write(&test_object); + uint32_t* read = triple_buffer_read(&test_object); + *triple_buffer_begin_write(&test_object) = 2; + triple_buffer_end_write(&test_object); + *triple_buffer_begin_write(&test_object) = 3; + triple_buffer_end_write(&test_object); + assert_that(*read, is_equal_to(1)); + assert_that(*triple_buffer_read(&test_object), is_equal_to(3)); + assert_that(triple_buffer_read(&test_object), is_equal_to(NULL)); +} diff --git a/quantum/template/template.c b/quantum/template/template.c index dcc4b0a22..3057557ea 100644 --- a/quantum/template/template.c +++ b/quantum/template/template.c @@ -18,7 +18,7 @@ bool process_record_kb(uint16_t keycode, keyrecord_t *record) { // put your per-action keyboard code here // runs for every action, just before processing by the firmware - return process_action_user(record); + return process_record_user(record); } void led_set_kb(uint8_t usb_led) { diff --git a/quantum/visualizer/LICENSE.md b/quantum/visualizer/LICENSE.md new file mode 100644 index 000000000..22d4c3f08 --- /dev/null +++ b/quantum/visualizer/LICENSE.md @@ -0,0 +1,29 @@ +The files in this project are licensed under the MIT license +It uses the following libraries +uGFX - with it's own license, see the license.html file in the uGFX subfolder for more information +tmk_core - is indirectly used and not included in the repository. It's licensed under the GPLv2 license +Chibios - which is used by tmk_core is licensed under GPLv3. + +Therefore the effective license for any project using the library is GPLv3 + +The MIT License (MIT) + +Copyright (c) 2016 Fred Sundvik + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. diff --git a/quantum/visualizer/example_integration/callbacks.c b/quantum/visualizer/example_integration/callbacks.c new file mode 100644 index 000000000..2539615d6 --- /dev/null +++ b/quantum/visualizer/example_integration/callbacks.c @@ -0,0 +1,36 @@ +/* +The MIT License (MIT) + +Copyright (c) 2016 Fred Sundvik + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. +*/ + +#include "keyboard.h" +#include "action_layer.h" +#include "visualizer.h" +#include "host.h" + +void post_keyboard_init(void) { + visualizer_init(); +} + +void post_keyboard_task() { + visualizer_set_state(default_layer_state, layer_state, host_keyboard_leds()); +} diff --git a/quantum/visualizer/example_integration/gfxconf.h b/quantum/visualizer/example_integration/gfxconf.h new file mode 100644 index 000000000..304c5d187 --- /dev/null +++ b/quantum/visualizer/example_integration/gfxconf.h @@ -0,0 +1,325 @@ +/** + * This file has a different license to the rest of the uGFX system. + * You can copy, modify and distribute this file as you see fit. + * You do not need to publish your source modifications to this file. + * The only thing you are not permitted to do is to relicense it + * under a different license. + */ + +/** + * Copy this file into your project directory and rename it as gfxconf.h + * Edit your copy to turn on the uGFX features you want to use. + * The values below are the defaults. + * + * Only remove the comments from lines where you want to change the + * default value. This allows definitions to be included from + * driver makefiles when required and provides the best future + * compatibility for your project. + * + * Please use spaces instead of tabs in this file. + */ + +#ifndef _GFXCONF_H +#define _GFXCONF_H + + +/////////////////////////////////////////////////////////////////////////// +// GOS - One of these must be defined, preferably in your Makefile // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_OS_CHIBIOS TRUE +//#define GFX_USE_OS_FREERTOS FALSE +// #define GFX_FREERTOS_USE_TRACE FALSE +//#define GFX_USE_OS_WIN32 FALSE +//#define GFX_USE_OS_LINUX FALSE +//#define GFX_USE_OS_OSX FALSE +//#define GFX_USE_OS_ECOS FALSE +//#define GFX_USE_OS_RAWRTOS FALSE +//#define GFX_USE_OS_ARDUINO FALSE +//#define GFX_USE_OS_KEIL FALSE +//#define GFX_USE_OS_CMSIS FALSE +//#define GFX_USE_OS_RAW32 FALSE +// #define INTERRUPTS_OFF() optional_code +// #define INTERRUPTS_ON() optional_code +// These are not defined by default for some reason +#define GOS_NEED_X_THREADS FALSE +#define GOS_NEED_X_HEAP FALSE + +// Options that (should where relevant) apply to all operating systems + #define GFX_NO_INLINE FALSE +// #define GFX_COMPILER GFX_COMPILER_UNKNOWN +// #define GFX_CPU GFX_CPU_UNKNOWN +// #define GFX_OS_HEAP_SIZE 0 +// #define GFX_OS_NO_INIT FALSE +// #define GFX_OS_INIT_NO_WARNING FALSE +// #define GFX_OS_PRE_INIT_FUNCTION myHardwareInitRoutine +// #define GFX_OS_EXTRA_INIT_FUNCTION myOSInitRoutine +// #define GFX_OS_EXTRA_DEINIT_FUNCTION myOSDeInitRoutine + + +/////////////////////////////////////////////////////////////////////////// +// GDISP // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GDISP TRUE + +//#define GDISP_NEED_AUTOFLUSH FALSE +//#define GDISP_NEED_TIMERFLUSH FALSE +//#define GDISP_NEED_VALIDATION TRUE +//#define GDISP_NEED_CLIP TRUE +//#define GDISP_NEED_CIRCLE FALSE +//#define GDISP_NEED_ELLIPSE FALSE +//#define GDISP_NEED_ARC FALSE +//#define GDISP_NEED_ARCSECTORS FALSE +//#define GDISP_NEED_CONVEX_POLYGON FALSE +//#define GDISP_NEED_SCROLL FALSE +//#define GDISP_NEED_PIXELREAD FALSE +//#define GDISP_NEED_CONTROL FALSE +//#define GDISP_NEED_QUERY FALSE +//#define GDISP_NEED_MULTITHREAD FALSE +//#define GDISP_NEED_STREAMING FALSE +#define GDISP_NEED_TEXT TRUE +// #define GDISP_NEED_TEXT_WORDWRAP FALSE +// #define GDISP_NEED_ANTIALIAS FALSE +// #define GDISP_NEED_UTF8 FALSE + #define GDISP_NEED_TEXT_KERNING TRUE +// #define GDISP_INCLUDE_FONT_UI1 FALSE +// #define GDISP_INCLUDE_FONT_UI2 FALSE // The smallest preferred font. +// #define GDISP_INCLUDE_FONT_LARGENUMBERS FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS10 FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS12 FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS16 FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS20 FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS24 FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS32 FALSE + #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12 TRUE +// #define GDISP_INCLUDE_FONT_FIXED_10X20 FALSE +// #define GDISP_INCLUDE_FONT_FIXED_7X14 FALSE + #define GDISP_INCLUDE_FONT_FIXED_5X8 TRUE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS12_AA FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS16_AA FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS20_AA FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS24_AA FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANS32_AA FALSE +// #define GDISP_INCLUDE_FONT_DEJAVUSANSBOLD12_AA FALSE +// #define GDISP_INCLUDE_USER_FONTS FALSE + +//#define GDISP_NEED_IMAGE FALSE +// #define GDISP_NEED_IMAGE_NATIVE FALSE +// #define GDISP_NEED_IMAGE_GIF FALSE +// #define GDISP_NEED_IMAGE_BMP FALSE +// #define GDISP_NEED_IMAGE_BMP_1 FALSE +// #define GDISP_NEED_IMAGE_BMP_4 FALSE +// #define GDISP_NEED_IMAGE_BMP_4_RLE FALSE +// #define GDISP_NEED_IMAGE_BMP_8 FALSE +// #define GDISP_NEED_IMAGE_BMP_8_RLE FALSE +// #define GDISP_NEED_IMAGE_BMP_16 FALSE +// #define GDISP_NEED_IMAGE_BMP_24 FALSE +// #define GDISP_NEED_IMAGE_BMP_32 FALSE +// #define GDISP_NEED_IMAGE_JPG FALSE +// #define GDISP_NEED_IMAGE_PNG FALSE +// #define GDISP_NEED_IMAGE_ACCOUNTING FALSE + +//#define GDISP_NEED_PIXMAP FALSE +// #define GDISP_NEED_PIXMAP_IMAGE FALSE + +//#define GDISP_DEFAULT_ORIENTATION GDISP_ROTATE_LANDSCAPE // If not defined the native hardware orientation is used. +//#define GDISP_LINEBUF_SIZE 128 +//#define GDISP_STARTUP_COLOR Black +#define GDISP_NEED_STARTUP_LOGO FALSE + +//#define GDISP_TOTAL_DISPLAYS 1 + +//#define GDISP_DRIVER_LIST GDISPVMT_Win32, GDISPVMT_Win32 +// #ifdef GDISP_DRIVER_LIST +// // For code and speed optimization define as TRUE or FALSE if all controllers have the same capability +// #define GDISP_HARDWARE_STREAM_WRITE FALSE +// #define GDISP_HARDWARE_STREAM_READ FALSE +// #define GDISP_HARDWARE_STREAM_POS FALSE +// #define GDISP_HARDWARE_DRAWPIXEL FALSE +// #define GDISP_HARDWARE_CLEARS FALSE +// #define GDISP_HARDWARE_FILLS FALSE +// #define GDISP_HARDWARE_BITFILLS FALSE +// #define GDISP_HARDWARE_SCROLL FALSE +// #define GDISP_HARDWARE_PIXELREAD FALSE +// #define GDISP_HARDWARE_CONTROL FALSE +// #define GDISP_HARDWARE_QUERY FALSE +// #define GDISP_HARDWARE_CLIP FALSE + + #define GDISP_PIXELFORMAT GDISP_PIXELFORMAT_RGB888 +// #endif + +// The custom format is not defined for some reason, so define it as error +// so we don't get compiler warnings +#define GDISP_PIXELFORMAT_CUSTOM GDISP_PIXELFORMAT_ERROR + +#define GDISP_USE_GFXNET FALSE +// #define GDISP_GFXNET_PORT 13001 +// #define GDISP_GFXNET_CUSTOM_LWIP_STARTUP FALSE +// #define GDISP_DONT_WAIT_FOR_NET_DISPLAY FALSE +// #define GDISP_GFXNET_UNSAFE_SOCKETS FALSE + + +/////////////////////////////////////////////////////////////////////////// +// GWIN // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GWIN FALSE + +//#define GWIN_NEED_WINDOWMANAGER FALSE +// #define GWIN_REDRAW_IMMEDIATE FALSE +// #define GWIN_REDRAW_SINGLEOP FALSE +// #define GWIN_NEED_FLASHING FALSE +// #define GWIN_FLASHING_PERIOD 250 + +//#define GWIN_NEED_CONSOLE FALSE +// #define GWIN_CONSOLE_USE_HISTORY FALSE +// #define GWIN_CONSOLE_HISTORY_AVERAGING FALSE +// #define GWIN_CONSOLE_HISTORY_ATCREATE FALSE +// #define GWIN_CONSOLE_ESCSEQ FALSE +// #define GWIN_CONSOLE_USE_BASESTREAM FALSE +// #define GWIN_CONSOLE_USE_FLOAT FALSE +//#define GWIN_NEED_GRAPH FALSE +//#define GWIN_NEED_GL3D FALSE + +//#define GWIN_NEED_WIDGET FALSE +//#define GWIN_FOCUS_HIGHLIGHT_WIDTH 1 +// #define GWIN_NEED_LABEL FALSE +// #define GWIN_LABEL_ATTRIBUTE FALSE +// #define GWIN_NEED_BUTTON FALSE +// #define GWIN_BUTTON_LAZY_RELEASE FALSE +// #define GWIN_NEED_SLIDER FALSE +// #define GWIN_SLIDER_NOSNAP FALSE +// #define GWIN_SLIDER_DEAD_BAND 5 +// #define GWIN_SLIDER_TOGGLE_INC 20 +// #define GWIN_NEED_CHECKBOX FALSE +// #define GWIN_NEED_IMAGE FALSE +// #define GWIN_NEED_IMAGE_ANIMATION FALSE +// #define GWIN_NEED_RADIO FALSE +// #define GWIN_NEED_LIST FALSE +// #define GWIN_NEED_LIST_IMAGES FALSE +// #define GWIN_NEED_PROGRESSBAR FALSE +// #define GWIN_PROGRESSBAR_AUTO FALSE +// #define GWIN_NEED_KEYBOARD FALSE +// #define GWIN_KEYBOARD_DEFAULT_LAYOUT VirtualKeyboard_English1 +// #define GWIN_NEED_KEYBOARD_ENGLISH1 TRUE +// #define GWIN_NEED_TEXTEDIT FALSE +// #define GWIN_FLAT_STYLING FALSE +// #define GWIN_WIDGET_TAGS FALSE + +//#define GWIN_NEED_CONTAINERS FALSE +// #define GWIN_NEED_CONTAINER FALSE +// #define GWIN_NEED_FRAME FALSE +// #define GWIN_NEED_TABSET FALSE +// #define GWIN_TABSET_TABHEIGHT 18 + + +/////////////////////////////////////////////////////////////////////////// +// GEVENT // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GEVENT FALSE + +//#define GEVENT_ASSERT_NO_RESOURCE FALSE +//#define GEVENT_MAXIMUM_SIZE 32 +//#define GEVENT_MAX_SOURCE_LISTENERS 32 + + +/////////////////////////////////////////////////////////////////////////// +// GTIMER // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GTIMER FALSE + +//#define GTIMER_THREAD_PRIORITY HIGH_PRIORITY +//#define GTIMER_THREAD_WORKAREA_SIZE 2048 + + +/////////////////////////////////////////////////////////////////////////// +// GQUEUE // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GQUEUE FALSE + +//#define GQUEUE_NEED_ASYNC FALSE +//#define GQUEUE_NEED_GSYNC FALSE +//#define GQUEUE_NEED_FSYNC FALSE +//#define GQUEUE_NEED_BUFFERS FALSE + +/////////////////////////////////////////////////////////////////////////// +// GINPUT // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GINPUT FALSE + +//#define GINPUT_NEED_MOUSE FALSE +// #define GINPUT_TOUCH_STARTRAW FALSE +// #define GINPUT_TOUCH_NOTOUCH FALSE +// #define GINPUT_TOUCH_NOCALIBRATE FALSE +// #define GINPUT_TOUCH_NOCALIBRATE_GUI FALSE +// #define GINPUT_MOUSE_POLL_PERIOD 25 +// #define GINPUT_MOUSE_CLICK_TIME 300 +// #define GINPUT_TOUCH_CXTCLICK_TIME 700 +// #define GINPUT_TOUCH_USER_CALIBRATION_LOAD FALSE +// #define GINPUT_TOUCH_USER_CALIBRATION_SAVE FALSE +// #define GMOUSE_DRIVER_LIST GMOUSEVMT_Win32, GMOUSEVMT_Win32 +//#define GINPUT_NEED_KEYBOARD FALSE +// #define GINPUT_KEYBOARD_POLL_PERIOD 200 +// #define GKEYBOARD_DRIVER_LIST GKEYBOARDVMT_Win32, GKEYBOARDVMT_Win32 +// #define GKEYBOARD_LAYOUT_OFF FALSE +// #define GKEYBOARD_LAYOUT_SCANCODE2_US FALSE +//#define GINPUT_NEED_TOGGLE FALSE +//#define GINPUT_NEED_DIAL FALSE + + +/////////////////////////////////////////////////////////////////////////// +// GFILE // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GFILE FALSE + +//#define GFILE_NEED_PRINTG FALSE +//#define GFILE_NEED_SCANG FALSE +//#define GFILE_NEED_STRINGS FALSE +//#define GFILE_NEED_FILELISTS FALSE +//#define GFILE_NEED_STDIO FALSE +//#define GFILE_NEED_NOAUTOMOUNT FALSE +//#define GFILE_NEED_NOAUTOSYNC FALSE + +//#define GFILE_NEED_MEMFS FALSE +//#define GFILE_NEED_ROMFS FALSE +//#define GFILE_NEED_RAMFS FALSE +//#define GFILE_NEED_FATFS FALSE +//#define GFILE_NEED_NATIVEFS FALSE +//#define GFILE_NEED_CHBIOSFS FALSE + +//#define GFILE_ALLOW_FLOATS FALSE +//#define GFILE_ALLOW_DEVICESPECIFIC FALSE +//#define GFILE_MAX_GFILES 3 + +/////////////////////////////////////////////////////////////////////////// +// GADC // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GADC FALSE + +//#define GADC_MAX_LOWSPEED_DEVICES 4 + + +/////////////////////////////////////////////////////////////////////////// +// GAUDIO // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GAUDIO FALSE +// There seems to be a bug in the ugfx code, the wrong define is used +// So define it in order to avoid warnings +#define GFX_USE_GAUDIN GFX_USE_GAUDIO +// #define GAUDIO_NEED_PLAY FALSE +// #define GAUDIO_NEED_RECORD FALSE + + +/////////////////////////////////////////////////////////////////////////// +// GMISC // +/////////////////////////////////////////////////////////////////////////// +#define GFX_USE_GMISC FALSE + +//#define GMISC_NEED_ARRAYOPS FALSE +//#define GMISC_NEED_FASTTRIG FALSE +//#define GMISC_NEED_FIXEDTRIG FALSE +//#define GMISC_NEED_INVSQRT FALSE +// #define GMISC_INVSQRT_MIXED_ENDIAN FALSE +// #define GMISC_INVSQRT_REAL_SLOW FALSE +//#define GMISC_NEED_MATRIXFLOAT2D FALSE +//#define GMISC_NEED_MATRIXFIXED2D FALSE + +#endif /* _GFXCONF_H */ diff --git a/quantum/visualizer/example_integration/lcd_backlight_hal.c b/quantum/visualizer/example_integration/lcd_backlight_hal.c new file mode 100644 index 000000000..913131b16 --- /dev/null +++ b/quantum/visualizer/example_integration/lcd_backlight_hal.c @@ -0,0 +1,91 @@ +/* +The MIT License (MIT) + +Copyright (c) 2016 Fred Sundvik + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. +*/ + +#include "lcd_backlight.h" +#include "hal.h" + +#define RED_PIN 1 +#define GREEN_PIN 2 +#define BLUE_PIN 3 +#define CHANNEL_RED FTM0->CHANNEL[0] +#define CHANNEL_GREEN FTM0->CHANNEL[1] +#define CHANNEL_BLUE FTM0->CHANNEL[2] + +#define RGB_PORT PORTC +#define RGB_PORT_GPIO GPIOC + +// Base FTM clock selection (72 MHz system clock) +// @ 0xFFFF period, 72 MHz / (0xFFFF * 2) = Actual period +// Higher pre-scalar will use the most power (also look the best) +// Pre-scalar calculations +// 0 - 72 MHz -> 549 Hz +// 1 - 36 MHz -> 275 Hz +// 2 - 18 MHz -> 137 Hz +// 3 - 9 MHz -> 69 Hz (Slightly visible flicker) +// 4 - 4 500 kHz -> 34 Hz (Visible flickering) +// 5 - 2 250 kHz -> 17 Hz +// 6 - 1 125 kHz -> 9 Hz +// 7 - 562 500 Hz -> 4 Hz +// Using a higher pre-scalar without flicker is possible but FTM0_MOD will need to be reduced +// Which will reduce the brightness range +#define PRESCALAR_DEFINE 0 + +void lcd_backlight_hal_init(void) { + // Setup Backlight + SIM->SCGC6 |= SIM_SCGC6_FTM0; + FTM0->CNT = 0; // Reset counter + + // PWM Period + // 16-bit maximum + FTM0->MOD = 0xFFFF; + + // Set FTM to PWM output - Edge Aligned, Low-true pulses +#define CNSC_MODE FTM_SC_CPWMS | FTM_SC_PS(4) | FTM_SC_CLKS(0) + CHANNEL_RED.CnSC = CNSC_MODE; + CHANNEL_GREEN.CnSC = CNSC_MODE; + CHANNEL_BLUE.CnSC = CNSC_MODE; + + // System clock, /w prescalar setting + FTM0->SC = FTM_SC_CLKS(1) | FTM_SC_PS(PRESCALAR_DEFINE); + + CHANNEL_RED.CnV = 0; + CHANNEL_GREEN.CnV = 0; + CHANNEL_BLUE.CnV = 0; + + RGB_PORT_GPIO->PDDR |= (1 << RED_PIN); + RGB_PORT_GPIO->PDDR |= (1 << GREEN_PIN); + RGB_PORT_GPIO->PDDR |= (1 << BLUE_PIN); + +#define RGB_MODE PORTx_PCRn_SRE | PORTx_PCRn_DSE | PORTx_PCRn_MUX(4) + RGB_PORT->PCR[RED_PIN] = RGB_MODE; + RGB_PORT->PCR[GREEN_PIN] = RGB_MODE; + RGB_PORT->PCR[BLUE_PIN] = RGB_MODE; +} + +void lcd_backlight_hal_color(uint16_t r, uint16_t g, uint16_t b) { + CHANNEL_RED.CnV = r; + CHANNEL_GREEN.CnV = g; + CHANNEL_BLUE.CnV = b; +} + diff --git a/quantum/visualizer/example_integration/visualizer_user.c b/quantum/visualizer/example_integration/visualizer_user.c new file mode 100644 index 000000000..fc09fe2ea --- /dev/null +++ b/quantum/visualizer/example_integration/visualizer_user.c @@ -0,0 +1,121 @@ +/* +The MIT License (MIT) + +Copyright (c) 2016 Fred Sundvik + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. +*/ + +// Currently we are assuming that both the backlight and LCD are enabled +// But it's entirely possible to write a custom visualizer that use only +// one of them +#ifndef LCD_BACKLIGHT_ENABLE +#error This visualizer needs that LCD backlight is enabled +#endif + +#ifndef LCD_ENABLE +#error This visualizer needs that LCD is enabled +#endif + +#include "visualizer.h" + +static const char* welcome_text[] = {"TMK", "Infinity Ergodox"}; + +// Just an example how to write custom keyframe functions, we could have moved +// all this into the init function +bool display_welcome(keyframe_animation_t* animation, visualizer_state_t* state) { + (void)animation; + // Read the uGFX documentation for information how to use the displays + // http://wiki.ugfx.org/index.php/Main_Page + gdispClear(White); + // You can use static variables for things that can't be found in the animation + // or state structs + gdispDrawString(0, 3, welcome_text[0], state->font_dejavusansbold12, Black); + gdispDrawString(0, 15, welcome_text[1], state->font_dejavusansbold12, Black); + // Always remember to flush the display + gdispFlush(); + // you could set the backlight color as well, but we won't do it here, since + // it's part of the following animation + // lcd_backlight_color(hue, saturation, intensity); + // We don't need constant updates, just drawing the screen once is enough + return false; +} + +// Feel free to modify the animations below, or even add new ones if needed + +// Don't worry, if the startup animation is long, you can use the keyboard like normal +// during that time +static keyframe_animation_t startup_animation = { + .num_frames = 4, + .loop = false, + .frame_lengths = {0, MS2ST(1000), MS2ST(5000), 0}, + .frame_functions = {display_welcome, keyframe_animate_backlight_color, keyframe_no_operation, enable_visualization}, +}; + +// The color animation animates the LCD color when you change layers +static keyframe_animation_t color_animation = { + .num_frames = 2, + .loop = false, + // Note that there's a 200 ms no-operation frame, + // this prevents the color from changing when activating the layer + // momentarily + .frame_lengths = {MS2ST(200), MS2ST(500)}, + .frame_functions = {keyframe_no_operation, keyframe_animate_backlight_color}, +}; + +// The LCD animation alternates between the layer name display and a +// bitmap that displays all active layers +static keyframe_animation_t lcd_animation = { + .num_frames = 2, + .loop = true, + .frame_lengths = {MS2ST(2000), MS2ST(2000)}, + .frame_functions = {keyframe_display_layer_text, keyframe_display_layer_bitmap}, +}; + +void initialize_user_visualizer(visualizer_state_t* state) { + // The brightness will be dynamically adjustable in the future + // But for now, change it here. + lcd_backlight_brightness(0x50); + state->current_lcd_color = LCD_COLOR(0x00, 0x00, 0xFF); + state->target_lcd_color = LCD_COLOR(0x10, 0xFF, 0xFF); + start_keyframe_animation(&startup_animation); +} + +void update_user_visualizer_state(visualizer_state_t* state) { + // Add more tests, change the colors and layer texts here + // Usually you want to check the high bits (higher layers first) + // because that's the order layers are processed for keypresses + // You can for check for example: + // state->status.layer + // state->status.default_layer + // state->status.leds (see led.h for available statuses) + if (state->status.layer & 0x2) { + state->target_lcd_color = LCD_COLOR(0xA0, 0xB0, 0xFF); + state->layer_text = "Layer 2"; + } + else { + state->target_lcd_color = LCD_COLOR(0x50, 0xB0, 0xFF); + state->layer_text = "Layer 1"; + } + // You can also stop existing animations, and start your custom ones here + // remember that you should normally have only one animation for the LCD + // and one for the background. But you can also combine them if you want. + start_keyframe_animation(&lcd_animation); + start_keyframe_animation(&color_animation); +} diff --git a/quantum/visualizer/lcd_backlight.c b/quantum/visualizer/lcd_backlight.c new file mode 100644 index 000000000..70187d1e0 --- /dev/null +++ b/quantum/visualizer/lcd_backlight.c @@ -0,0 +1,85 @@ +/* +The MIT License (MIT) + +Copyright (c) 2016 Fred Sundvik + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. +*/ + +#include "lcd_backlight.h" +#include + +static uint8_t current_hue = 0x00; +static uint8_t current_saturation = 0x00; +static uint8_t current_intensity = 0xFF; +static uint8_t current_brightness = 0x7F; + +void lcd_backlight_init(void) { + lcd_backlight_hal_init(); + lcd_backlight_color(current_hue, current_saturation, current_intensity); +} + +// This code is based on Brian Neltner's blogpost and example code +// "Why every LED light should be using HSI colorspace". +// http://blog.saikoled.com/post/43693602826/why-every-led-light-should-be-using-hsi +static void hsi_to_rgb(float h, float s, float i, uint16_t* r_out, uint16_t* g_out, uint16_t* b_out) { + unsigned int r, g, b; + h = fmodf(h, 360.0f); // cycle h around to 0-360 degrees + h = 3.14159f * h / 180.0f; // Convert to radians. + s = s > 0.0f ? (s < 1.0f ? s : 1.0f) : 0.0f; // clamp s and i to interval [0,1] + i = i > 0.0f ? (i < 1.0f ? i : 1.0f) : 0.0f; + + // Math! Thanks in part to Kyle Miller. + if(h < 2.09439f) { + r = 65535.0f * i/3.0f *(1.0f + s * cos(h) / cosf(1.047196667f - h)); + g = 65535.0f * i/3.0f *(1.0f + s *(1.0f - cosf(h) / cos(1.047196667f - h))); + b = 65535.0f * i/3.0f *(1.0f - s); + } else if(h < 4.188787) { + h = h - 2.09439; + g = 65535.0f * i/3.0f *(1.0f + s * cosf(h) / cosf(1.047196667f - h)); + b = 65535.0f * i/3.0f *(1.0f + s * (1.0f - cosf(h) / cosf(1.047196667f - h))); + r = 65535.0f * i/3.0f *(1.0f - s); + } else { + h = h - 4.188787; + b = 65535.0f*i/3.0f * (1.0f + s * cosf(h) / cosf(1.047196667f - h)); + r = 65535.0f*i/3.0f * (1.0f + s * (1.0f - cosf(h) / cosf(1.047196667f - h))); + g = 65535.0f*i/3.0f * (1.0f - s); + } + *r_out = r > 65535 ? 65535 : r; + *g_out = g > 65535 ? 65535 : g; + *b_out = b > 65535 ? 65535 : b; +} + +void lcd_backlight_color(uint8_t hue, uint8_t saturation, uint8_t intensity) { + uint16_t r, g, b; + float hue_f = 360.0f * (float)hue / 255.0f; + float saturation_f = (float)saturation / 255.0f; + float intensity_f = (float)intensity / 255.0f; + intensity_f *= (float)current_brightness / 255.0f; + hsi_to_rgb(hue_f, saturation_f, intensity_f, &r, &g, &b); + current_hue = hue; + current_saturation = saturation; + current_intensity = intensity; + lcd_backlight_hal_color(r, g, b); +} + +void lcd_backlight_brightness(uint8_t b) { + current_brightness = b; + lcd_backlight_color(current_hue, current_saturation, current_intensity); +} diff --git a/quantum/visualizer/lcd_backlight.h b/quantum/visualizer/lcd_backlight.h new file mode 100644 index 000000000..dd3e37a06 --- /dev/null +++ b/quantum/visualizer/lcd_backlight.h @@ -0,0 +1,42 @@ +/* +The MIT License (MIT) + +Copyright (c) 2016 Fred Sundvik + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. +*/ + +#ifndef LCD_BACKLIGHT_H_ +#define LCD_BACKLIGHT_H_ +#include "stdint.h" + +// Helper macros for storing hue, staturation and intensity as unsigned integers +#define LCD_COLOR(hue, saturation, intensity) (hue << 16 | saturation << 8 | intensity) +#define LCD_HUE(color) ((color >> 16) & 0xFF) +#define LCD_SAT(color) ((color >> 8) & 0xFF) +#define LCD_INT(color) (color & 0xFF) + +void lcd_backlight_init(void); +void lcd_backlight_color(uint8_t hue, uint8_t saturation, uint8_t intensity); +void lcd_backlight_brightness(uint8_t b); + +void lcd_backlight_hal_init(void); +void lcd_backlight_hal_color(uint16_t r, uint16_t g, uint16_t b); + +#endif /* LCD_BACKLIGHT_H_ */ diff --git a/quantum/visualizer/led_test.c b/quantum/visualizer/led_test.c new file mode 100644 index 000000000..a9abace8d --- /dev/null +++ b/quantum/visualizer/led_test.c @@ -0,0 +1,170 @@ +/* +The MIT License (MIT) + +Copyright (c) 2016 Fred Sundvik + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. +*/ +#include "led_test.h" +#include "gfx.h" +#include "math.h" + +#define CROSSFADE_TIME 1000 +#define GRADIENT_TIME 3000 + +keyframe_animation_t led_test_animation = { + .num_frames = 14, + .loop = true, + .frame_lengths = { + gfxMillisecondsToTicks(1000), // fade in + gfxMillisecondsToTicks(1000), // no op (leds on) + gfxMillisecondsToTicks(1000), // fade out + gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade + gfxMillisecondsToTicks(GRADIENT_TIME), // left to rigt (outside in) + gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade + gfxMillisecondsToTicks(GRADIENT_TIME), // top_to_bottom + 0, // mirror leds + gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade + gfxMillisecondsToTicks(GRADIENT_TIME), // left_to_right (mirrored, so inside out) + gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade + gfxMillisecondsToTicks(GRADIENT_TIME), // top_to_bottom + 0, // normal leds + gfxMillisecondsToTicks(CROSSFADE_TIME), // crossfade + + }, + .frame_functions = { + keyframe_fade_in_all_leds, + keyframe_no_operation, + keyframe_fade_out_all_leds, + keyframe_led_crossfade, + keyframe_led_left_to_right_gradient, + keyframe_led_crossfade, + keyframe_led_top_to_bottom_gradient, + keyframe_mirror_led_orientation, + keyframe_led_crossfade, + keyframe_led_left_to_right_gradient, + keyframe_led_crossfade, + keyframe_led_top_to_bottom_gradient, + keyframe_normal_led_orientation, + keyframe_led_crossfade, + }, +}; + +static uint8_t fade_led_color(keyframe_animation_t* animation, int from, int to) { + int frame_length = animation->frame_lengths[animation->current_frame]; + int current_pos = frame_length - animation->time_left_in_frame; + int delta = to - from; + int luma = (delta * current_pos) / frame_length; + luma += from; + return luma; +} + +static void keyframe_fade_all_leds_from_to(keyframe_animation_t* animation, uint8_t from, uint8_t to) { + uint8_t luma = fade_led_color(animation, from, to); + color_t color = LUMA2COLOR(luma); + gdispGClear(LED_DISPLAY, color); +} + +// TODO: Should be customizable per keyboard +#define NUM_ROWS 7 +#define NUM_COLS 7 + +static uint8_t crossfade_start_frame[NUM_ROWS][NUM_COLS]; +static uint8_t crossfade_end_frame[NUM_ROWS][NUM_COLS]; + +static uint8_t compute_gradient_color(float t, float index, float num) { + const float two_pi = M_2_PI; + float normalized_index = (1.0f - index / (num - 1.0f)) * two_pi; + float x = t * two_pi + normalized_index; + float v = 0.5 * (cosf(x) + 1.0f); + return (uint8_t)(255.0f * v); +} + +bool keyframe_fade_in_all_leds(keyframe_animation_t* animation, visualizer_state_t* state) { + (void)state; + keyframe_fade_all_leds_from_to(animation, 0, 255); + return true; +} + +bool keyframe_fade_out_all_leds(keyframe_animation_t* animation, visualizer_state_t* state) { + (void)state; + keyframe_fade_all_leds_from_to(animation, 255, 0); + return true; +} + +bool keyframe_led_left_to_right_gradient(keyframe_animation_t* animation, visualizer_state_t* state) { + (void)state; + float frame_length = animation->frame_lengths[animation->current_frame]; + float current_pos = frame_length - animation->time_left_in_frame; + float t = current_pos / frame_length; + for (int i=0; i< NUM_COLS; i++) { + uint8_t color = compute_gradient_color(t, i, NUM_COLS); + gdispGDrawLine(LED_DISPLAY, i, 0, i, NUM_ROWS - 1, LUMA2COLOR(color)); + } + return true; +} + +bool keyframe_led_top_to_bottom_gradient(keyframe_animation_t* animation, visualizer_state_t* state) { + (void)state; + float frame_length = animation->frame_lengths[animation->current_frame]; + float current_pos = frame_length - animation->time_left_in_frame; + float t = current_pos / frame_length; + for (int i=0; i< NUM_ROWS; i++) { + uint8_t color = compute_gradient_color(t, i, NUM_ROWS); + gdispGDrawLine(LED_DISPLAY, 0, i, NUM_COLS - 1, i, LUMA2COLOR(color)); + } + return true; +} + +static void copy_current_led_state(uint8_t* dest) { + for (int i=0;ifirst_update_of_frame) { + copy_current_led_state(&crossfade_start_frame[0][0]); + run_next_keyframe(animation, state); + copy_current_led_state(&crossfade_end_frame[0][0]); + } + for (int i=0;i +#ifdef PROTOCOL_CHIBIOS +#include "ch.h" +#endif + +#include "gfx.h" + +#ifdef LCD_BACKLIGHT_ENABLE +#include "lcd_backlight.h" +#endif + +//#define DEBUG_VISUALIZER + +#ifdef DEBUG_VISUALIZER +#include "debug.h" +#else +#include "nodebug.h" +#endif + +#ifdef SERIAL_LINK_ENABLE +#include "serial_link/protocol/transport.h" +#include "serial_link/system/serial_link.h" +#endif + +// Define this in config.h +#ifndef VISUALIZER_THREAD_PRIORITY +#define "Visualizer thread priority not defined" +#endif + + +static visualizer_keyboard_status_t current_status = { + .layer = 0xFFFFFFFF, + .default_layer = 0xFFFFFFFF, + .leds = 0xFFFFFFFF, + .suspended = false, +}; + +static bool same_status(visualizer_keyboard_status_t* status1, visualizer_keyboard_status_t* status2) { + return status1->layer == status2->layer && + status1->default_layer == status2->default_layer && + status1->leds == status2->leds && + status1->suspended == status2->suspended; +} + +static bool visualizer_enabled = false; + +#define MAX_SIMULTANEOUS_ANIMATIONS 4 +static keyframe_animation_t* animations[MAX_SIMULTANEOUS_ANIMATIONS] = {}; + +#ifdef SERIAL_LINK_ENABLE +MASTER_TO_ALL_SLAVES_OBJECT(current_status, visualizer_keyboard_status_t); + +static remote_object_t* remote_objects[] = { + REMOTE_OBJECT(current_status), +}; + +#endif + +GDisplay* LCD_DISPLAY = 0; +GDisplay* LED_DISPLAY = 0; + +__attribute__((weak)) +GDisplay* get_lcd_display(void) { + return gdispGetDisplay(0); +} + +__attribute__((weak)) +GDisplay* get_led_display(void) { + return gdispGetDisplay(1); +} + +void start_keyframe_animation(keyframe_animation_t* animation) { + animation->current_frame = -1; + animation->time_left_in_frame = 0; + animation->need_update = true; + int free_index = -1; + for (int i=0;icurrent_frame = animation->num_frames; + animation->time_left_in_frame = 0; + animation->need_update = true; + animation->first_update_of_frame = false; + animation->last_update_of_frame = false; + for (int i=0;icurrent_frame = animations[i]->num_frames; + animations[i]->time_left_in_frame = 0; + animations[i]->need_update = true; + animations[i]->first_update_of_frame = false; + animations[i]->last_update_of_frame = false; + animations[i] = NULL; + } + } +} + +static bool update_keyframe_animation(keyframe_animation_t* animation, visualizer_state_t* state, systemticks_t delta, systemticks_t* sleep_time) { + // TODO: Clean up this messy code + dprintf("Animation frame%d, left %d, delta %d\n", animation->current_frame, + animation->time_left_in_frame, delta); + if (animation->current_frame == animation->num_frames) { + animation->need_update = false; + return false; + } + if (animation->current_frame == -1) { + animation->current_frame = 0; + animation->time_left_in_frame = animation->frame_lengths[0]; + animation->need_update = true; + animation->first_update_of_frame = true; + } else { + animation->time_left_in_frame -= delta; + while (animation->time_left_in_frame <= 0) { + int left = animation->time_left_in_frame; + if (animation->need_update) { + animation->time_left_in_frame = 0; + animation->last_update_of_frame = true; + (*animation->frame_functions[animation->current_frame])(animation, state); + animation->last_update_of_frame = false; + } + animation->current_frame++; + animation->need_update = true; + animation->first_update_of_frame = true; + if (animation->current_frame == animation->num_frames) { + if (animation->loop) { + animation->current_frame = 0; + } + else { + stop_keyframe_animation(animation); + return false; + } + } + delta = -left; + animation->time_left_in_frame = animation->frame_lengths[animation->current_frame]; + animation->time_left_in_frame -= delta; + } + } + if (animation->need_update) { + animation->need_update = (*animation->frame_functions[animation->current_frame])(animation, state); + animation->first_update_of_frame = false; + } + + systemticks_t wanted_sleep = animation->need_update ? gfxMillisecondsToTicks(10) : (unsigned)animation->time_left_in_frame; + if (wanted_sleep < *sleep_time) { + *sleep_time = wanted_sleep; + } + + return true; +} + +void run_next_keyframe(keyframe_animation_t* animation, visualizer_state_t* state) { + int next_frame = animation->current_frame + 1; + if (next_frame == animation->num_frames) { + next_frame = 0; + } + keyframe_animation_t temp_animation = *animation; + temp_animation.current_frame = next_frame; + temp_animation.time_left_in_frame = animation->frame_lengths[next_frame]; + temp_animation.first_update_of_frame = true; + temp_animation.last_update_of_frame = false; + temp_animation.need_update = false; + visualizer_state_t temp_state = *state; + (*temp_animation.frame_functions[next_frame])(&temp_animation, &temp_state); +} + +bool keyframe_no_operation(keyframe_animation_t* animation, visualizer_state_t* state) { + (void)animation; + (void)state; + return false; +} + +#ifdef LCD_BACKLIGHT_ENABLE +bool keyframe_animate_backlight_color(keyframe_animation_t* animation, visualizer_state_t* state) { + int frame_length = animation->frame_lengths[animation->current_frame]; + int current_pos = frame_length - animation->time_left_in_frame; + uint8_t t_h = LCD_HUE(state->target_lcd_color); + uint8_t t_s = LCD_SAT(state->target_lcd_color); + uint8_t t_i = LCD_INT(state->target_lcd_color); + uint8_t p_h = LCD_HUE(state->prev_lcd_color); + uint8_t p_s = LCD_SAT(state->prev_lcd_color); + uint8_t p_i = LCD_INT(state->prev_lcd_color); + + uint8_t d_h1 = t_h - p_h; //Modulo arithmetic since we want to wrap around + int d_h2 = t_h - p_h; + // Chose the shortest way around + int d_h = abs(d_h2) < d_h1 ? d_h2 : d_h1; + int d_s = t_s - p_s; + int d_i = t_i - p_i; + + int hue = (d_h * current_pos) / frame_length; + int sat = (d_s * current_pos) / frame_length; + int intensity = (d_i * current_pos) / frame_length; + //dprintf("%X -> %X = %X\n", p_h, t_h, hue); + hue += p_h; + sat += p_s; + intensity += p_i; + state->current_lcd_color = LCD_COLOR(hue, sat, intensity); + lcd_backlight_color( + LCD_HUE(state->current_lcd_color), + LCD_SAT(state->current_lcd_color), + LCD_INT(state->current_lcd_color)); + + return true; +} + +bool keyframe_set_backlight_color(keyframe_animation_t* animation, visualizer_state_t* state) { + (void)animation; + state->prev_lcd_color = state->target_lcd_color; + state->current_lcd_color = state->target_lcd_color; + lcd_backlight_color( + LCD_HUE(state->current_lcd_color), + LCD_SAT(state->current_lcd_color), + LCD_INT(state->current_lcd_color)); + return false; +} +#endif // LCD_BACKLIGHT_ENABLE + +#ifdef LCD_ENABLE +bool keyframe_display_layer_text(keyframe_animation_t* animation, visualizer_state_t* state) { + (void)animation; + gdispClear(White); + gdispDrawString(0, 10, state->layer_text, state->font_dejavusansbold12, Black); + gdispFlush(); + return false; +} + +static void format_layer_bitmap_string(uint16_t default_layer, uint16_t layer, char* buffer) { + for (int i=0; i<16;i++) + { + uint32_t mask = (1u << i); + if (default_layer & mask) { + if (layer & mask) { + *buffer = 'B'; + } else { + *buffer = 'D'; + } + } else if (layer & mask) { + *buffer = '1'; + } else { + *buffer = '0'; + } + ++buffer; + + if (i==3 || i==7 || i==11) { + *buffer = ' '; + ++buffer; + } + } + *buffer = 0; +} + +bool keyframe_display_layer_bitmap(keyframe_animation_t* animation, visualizer_state_t* state) { + (void)animation; + const char* layer_help = "1=On D=Default B=Both"; + char layer_buffer[16 + 4]; // 3 spaces and one null terminator + gdispClear(White); + gdispDrawString(0, 0, layer_help, state->font_fixed5x8, Black); + format_layer_bitmap_string(state->status.default_layer, state->status.layer, layer_buffer); + gdispDrawString(0, 10, layer_buffer, state->font_fixed5x8, Black); + format_layer_bitmap_string(state->status.default_layer >> 16, state->status.layer >> 16, layer_buffer); + gdispDrawString(0, 20, layer_buffer, state->font_fixed5x8, Black); + gdispFlush(); + return false; +} +#endif // LCD_ENABLE + +bool keyframe_disable_lcd_and_backlight(keyframe_animation_t* animation, visualizer_state_t* state) { + (void)animation; + (void)state; +#ifdef LCD_ENABLE + gdispSetPowerMode(powerOff); +#endif +#ifdef LCD_BACKLIGHT_ENABLE + lcd_backlight_hal_color(0, 0, 0); +#endif + return false; +} + +bool keyframe_enable_lcd_and_backlight(keyframe_animation_t* animation, visualizer_state_t* state) { + (void)animation; + (void)state; +#ifdef LCD_ENABLE + gdispSetPowerMode(powerOn); +#endif + return false; +} + +bool enable_visualization(keyframe_animation_t* animation, visualizer_state_t* state) { + (void)animation; + (void)state; + dprint("User visualizer inited\n"); + visualizer_enabled = true; + return false; +} + +// TODO: Optimize the stack size, this is probably way too big +static DECLARE_THREAD_STACK(visualizerThreadStack, 1024); +static DECLARE_THREAD_FUNCTION(visualizerThread, arg) { + (void)arg; + + GListener event_listener; + geventListenerInit(&event_listener); + geventAttachSource(&event_listener, (GSourceHandle)¤t_status, 0); + + visualizer_keyboard_status_t initial_status = { + .default_layer = 0xFFFFFFFF, + .layer = 0xFFFFFFFF, + .leds = 0xFFFFFFFF, + .suspended = false, + }; + + visualizer_state_t state = { + .status = initial_status, + .current_lcd_color = 0, +#ifdef LCD_ENABLE + .font_fixed5x8 = gdispOpenFont("fixed_5x8"), + .font_dejavusansbold12 = gdispOpenFont("DejaVuSansBold12") +#endif + }; + initialize_user_visualizer(&state); + state.prev_lcd_color = state.current_lcd_color; + +#ifdef LCD_BACKLIGHT_ENABLE + lcd_backlight_color( + LCD_HUE(state.current_lcd_color), + LCD_SAT(state.current_lcd_color), + LCD_INT(state.current_lcd_color)); +#endif + + systemticks_t sleep_time = TIME_INFINITE; + systemticks_t current_time = gfxSystemTicks(); + + while(true) { + systemticks_t new_time = gfxSystemTicks(); + systemticks_t delta = new_time - current_time; + current_time = new_time; + bool enabled = visualizer_enabled; + if (!same_status(&state.status, ¤t_status)) { + if (visualizer_enabled) { + if (current_status.suspended) { + stop_all_keyframe_animations(); + visualizer_enabled = false; + state.status = current_status; + user_visualizer_suspend(&state); + } + else { + state.status = current_status; + update_user_visualizer_state(&state); + } + state.prev_lcd_color = state.current_lcd_color; + } + } + if (!enabled && state.status.suspended && current_status.suspended == false) { + // Setting the status to the initial status will force an update + // when the visualizer is enabled again + state.status = initial_status; + state.status.suspended = false; + stop_all_keyframe_animations(); + user_visualizer_resume(&state); + state.prev_lcd_color = state.current_lcd_color; + } + sleep_time = TIME_INFINITE; + for (int i=0;i update_delta) { + sleep_time -= update_delta; + } + else { + sleep_time = 0; + } + } + dprintf("Update took %d, last delta %d, sleep_time %d\n", update_delta, delta, sleep_time); +#ifdef PROTOCOL_CHIBIOS + // The gEventWait function really takes milliseconds, even if the documentation says ticks. + // Unfortunately there's no generic ugfx conversion from system time to milliseconds, + // so let's do it in a platform dependent way. + + // On windows the system ticks is the same as milliseconds anyway + if (sleep_time != TIME_INFINITE) { + sleep_time = ST2MS(sleep_time); + } +#endif + geventEventWait(&event_listener, sleep_time); + } +#ifdef LCD_ENABLE + gdispCloseFont(state.font_fixed5x8); + gdispCloseFont(state.font_dejavusansbold12); +#endif + + return 0; +} + +void visualizer_init(void) { + gfxInit(); + +#ifdef LCD_BACKLIGHT_ENABLE + lcd_backlight_init(); +#endif + +#ifdef SERIAL_LINK_ENABLE + add_remote_objects(remote_objects, sizeof(remote_objects) / sizeof(remote_object_t*) ); +#endif + +#ifdef LCD_ENABLE + LCD_DISPLAY = get_lcd_display(); +#endif +#ifdef LED_ENABLE + LED_DISPLAY = get_led_display(); +#endif + + // We are using a low priority thread, the idea is to have it run only + // when the main thread is sleeping during the matrix scanning + gfxThreadCreate(visualizerThreadStack, sizeof(visualizerThreadStack), + VISUALIZER_THREAD_PRIORITY, visualizerThread, NULL); +} + +void update_status(bool changed) { + if (changed) { + GSourceListener* listener = geventGetSourceListener((GSourceHandle)¤t_status, NULL); + if (listener) { + geventSendEvent(listener); + } + } +#ifdef SERIAL_LINK_ENABLE + static systime_t last_update = 0; + systime_t current_update = chVTGetSystemTimeX(); + systime_t delta = current_update - last_update; + if (changed || delta > MS2ST(10)) { + last_update = current_update; + visualizer_keyboard_status_t* r = begin_write_current_status(); + *r = current_status; + end_write_current_status(); + } +#endif +} + +void visualizer_update(uint32_t default_state, uint32_t state, uint32_t leds) { + // Note that there's a small race condition here, the thread could read + // a state where one of these are set but not the other. But this should + // not really matter as it will be fixed during the next loop step. + // Alternatively a mutex could be used instead of the volatile variables + + bool changed = false; +#ifdef SERIAL_LINK_ENABLE + if (is_serial_link_connected ()) { + visualizer_keyboard_status_t* new_status = read_current_status(); + if (new_status) { + if (!same_status(¤t_status, new_status)) { + changed = true; + current_status = *new_status; + } + } + } + else { +#else + { +#endif + visualizer_keyboard_status_t new_status = { + .layer = state, + .default_layer = default_state, + .leds = leds, + .suspended = current_status.suspended, + }; + if (!same_status(¤t_status, &new_status)) { + changed = true; + current_status = new_status; + } + } + update_status(changed); +} + +void visualizer_suspend(void) { + current_status.suspended = true; + update_status(true); +} + +void visualizer_resume(void) { + current_status.suspended = false; + update_status(true); +} diff --git a/quantum/visualizer/visualizer.h b/quantum/visualizer/visualizer.h new file mode 100644 index 000000000..53e250725 --- /dev/null +++ b/quantum/visualizer/visualizer.h @@ -0,0 +1,147 @@ +/* +The MIT License (MIT) + +Copyright (c) 2016 Fred Sundvik + +Permission is hereby granted, free of charge, to any person obtaining a copy +of this software and associated documentation files (the "Software"), to deal +in the Software without restriction, including without limitation the rights +to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +copies of the Software, and to permit persons to whom the Software is +furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in all +copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +SOFTWARE. +*/ + +#ifndef VISUALIZER_H +#define VISUALIZER_H +#include +#include +#include + +#include "gfx.h" + +#ifdef LCD_BACKLIGHT_ENABLE +#include "lcd_backlight.h" +#endif + +// This need to be called once at the start +void visualizer_init(void); +// This should be called at every matrix scan +void visualizer_update(uint32_t default_state, uint32_t state, uint32_t leds); +// This should be called when the keyboard goes to suspend state +void visualizer_suspend(void); +// This should be called when the keyboard wakes up from suspend state +void visualizer_resume(void); + +// These functions are week, so they can be overridden by the keyboard +// if needed +GDisplay* get_lcd_display(void); +GDisplay* get_led_display(void); + +// For emulator builds, this function need to be implemented +#ifdef EMULATOR +void draw_emulator(void); +#endif + +// If you need support for more than 16 keyframes per animation, you can change this +#define MAX_VISUALIZER_KEY_FRAMES 16 + +struct keyframe_animation_t; + +typedef struct { + uint32_t layer; + uint32_t default_layer; + uint32_t leds; // See led.h for available statuses + bool suspended; +} visualizer_keyboard_status_t; + +// The state struct is used by the various keyframe functions +// It's also used for setting the LCD color and layer text +// from the user customized code +typedef struct visualizer_state_t { + // The user code should primarily be modifying these + uint32_t target_lcd_color; + const char* layer_text; + + // The user visualizer(and animation functions) can read these + visualizer_keyboard_status_t status; + + // These are used by the animation functions + uint32_t current_lcd_color; + uint32_t prev_lcd_color; +#ifdef LCD_ENABLE + font_t font_fixed5x8; + font_t font_dejavusansbold12; +#endif +} visualizer_state_t; + +// Any custom keyframe function should have this signature +// return true to get continuous updates, otherwise you will only get one +// update per frame +typedef bool (*frame_func)(struct keyframe_animation_t*, visualizer_state_t*); + +// Represents a keyframe animation, so fields are internal to the system +// while others are meant to be initialized by the user code +typedef struct keyframe_animation_t { + // These should be initialized + int num_frames; + bool loop; + int frame_lengths[MAX_VISUALIZER_KEY_FRAMES]; + frame_func frame_functions[MAX_VISUALIZER_KEY_FRAMES]; + + // Used internally by the system, and can also be read by + // keyframe update functions + int current_frame; + int time_left_in_frame; + bool first_update_of_frame; + bool last_update_of_frame; + bool need_update; + +} keyframe_animation_t; + +extern GDisplay* LCD_DISPLAY; +extern GDisplay* LED_DISPLAY; + +void start_keyframe_animation(keyframe_animation_t* animation); +void stop_keyframe_animation(keyframe_animation_t* animation); +// This runs the next keyframe, but does not update the animation state +// Useful for crossfades for example +void run_next_keyframe(keyframe_animation_t* animation, visualizer_state_t* state); + +// Some predefined keyframe functions that can be used by the user code +// Does nothing, useful for adding delays +bool keyframe_no_operation(keyframe_animation_t* animation, visualizer_state_t* state); +// Animates the LCD backlight color between the current color and the target color (of the state) +bool keyframe_animate_backlight_color(keyframe_animation_t* animation, visualizer_state_t* state); +// Sets the backlight color to the target color +bool keyframe_set_backlight_color(keyframe_animation_t* animation, visualizer_state_t* state); +// Displays the layer text centered vertically on the screen +bool keyframe_display_layer_text(keyframe_animation_t* animation, visualizer_state_t* state); +// Displays a bitmap (0/1) of all the currently active layers +bool keyframe_display_layer_bitmap(keyframe_animation_t* animation, visualizer_state_t* state); + +bool keyframe_disable_lcd_and_backlight(keyframe_animation_t* animation, visualizer_state_t* state); +bool keyframe_enable_lcd_and_backlight(keyframe_animation_t* animation, visualizer_state_t* state); + +// Call this once, when the initial animation has finished, alternatively you can call it +// directly from the initalize_user_visualizer function (the animation can be null) +bool enable_visualization(keyframe_animation_t* animation, visualizer_state_t* state); + +// These functions have to be implemented by the user +void initialize_user_visualizer(visualizer_state_t* state); +void update_user_visualizer_state(visualizer_state_t* state); +void user_visualizer_suspend(visualizer_state_t* state); +void user_visualizer_resume(visualizer_state_t* state); + + +#endif /* VISUALIZER_H */ diff --git a/quantum/visualizer/visualizer.mk b/quantum/visualizer/visualizer.mk new file mode 100644 index 000000000..2f4a41d66 --- /dev/null +++ b/quantum/visualizer/visualizer.mk @@ -0,0 +1,61 @@ +# The MIT License (MIT) +# +# Copyright (c) 2016 Fred Sundvik +# +# Permission is hereby granted, free of charge, to any person obtaining a copy +# of this software and associated documentation files (the "Software"), to deal +# in the Software without restriction, including without limitation the rights +# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell +# copies of the Software, and to permit persons to whom the Software is +# furnished to do so, subject to the following conditions: +# +# The above copyright notice and this permission notice shall be included in all +# copies or substantial portions of the Software. +# +# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE +# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE +# SOFTWARE. + +SRC += $(VISUALIZER_DIR)/visualizer.c +EXTRAINCDIRS += $(GFXINC) $(VISUALIZER_DIR) +GFXLIB = $(LIB_PATH)/ugfx +VPATH += $(VISUALIZER_PATH) + +OPT_DEFS += -DVISUALIZER_ENABLE + +ifdef LCD_ENABLE +OPT_DEFS += -DLCD_ENABLE +ULIBS += -lm +endif + +ifdef LCD_BACKLIGHT_ENABLE +SRC += $(VISUALIZER_DIR)/lcd_backlight.c +OPT_DEFS += -DLCD_BACKLIGHT_ENABLE +endif + +ifdef LED_ENABLE +SRC += $(VISUALIZER_DIR)/led_test.c +OPT_DEFS += -DLED_ENABLE +endif + +include $(GFXLIB)/gfx.mk +SRC += $(patsubst $(TOP_DIR)/%,%,$(GFXSRC)) +OPT_DEFS += $(patsubst %,-D%,$(patsubst -D%,%,$(GFXDEFS))) + +ifneq ("$(wildcard $(KEYMAP_PATH)/visualizer.c)","") + SRC += keyboards/$(KEYBOARD)/keymaps/$(KEYMAP)/visualizer.c +else + ifeq ("$(wildcard $(SUBPROJECT_PATH)/keymaps/$(KEYMAP)/visualizer.c)","") +$(error "$(KEYMAP_PATH)/visualizer.c" does not exist) + else + SRC += keyboards/$(KEYBOARD)/$(SUBPROJECT)/keymaps/$(KEYMAP)/visualizer.c + endif +endif + +ifdef EMULATOR +UINCDIR += $(TMK_DIR)/common +endif \ No newline at end of file diff --git a/tmk_core/avr.mk b/tmk_core/avr.mk index 72be5e6da..3bf2b34f8 100644 --- a/tmk_core/avr.mk +++ b/tmk_core/avr.mk @@ -10,6 +10,7 @@ AR = avr-ar rcs NM = avr-nm HEX = $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature EEP = $(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) +BIN = diff --git a/tmk_core/chibios.mk b/tmk_core/chibios.mk index 0abb933a8..cb67ac6f2 100644 --- a/tmk_core/chibios.mk +++ b/tmk_core/chibios.mk @@ -113,6 +113,7 @@ AR = arm-none-eabi-ar NM = arm-none-eabi-nm HEX = $(OBJCOPY) -O $(FORMAT) EEP = +BIN = $(OBJCOPY) -O binary THUMBFLAGS = -DTHUMB_PRESENT -mno-thumb-interwork -DTHUMB_NO_INTERWORKING -mthumb -DTHUMB @@ -151,4 +152,7 @@ else ifneq ("$(wildcard $(KEYBOARD_PATH)/boards/$(BOARD)/bootloader_defs.h)","") endif # List any extra directories to look for libraries here. -EXTRALIBDIRS = $(RULESPATH)/ld \ No newline at end of file +EXTRALIBDIRS = $(RULESPATH)/ld + +dfu-util: $(BUILD_DIR)/$(TARGET).bin sizeafter + dfu-util -D $(BUILD_DIR)/$(TARGET).bin \ No newline at end of file diff --git a/tmk_core/common.mk b/tmk_core/common.mk index d71fba9bc..5bae0d762 100644 --- a/tmk_core/common.mk +++ b/tmk_core/common.mk @@ -97,6 +97,15 @@ ifeq ($(strip $(KEYMAP_SECTION_ENABLE)), yes) endif endif +ifeq ($(MASTER),right) + OPT_DEFS += -DMASTER_IS_ON_RIGHT +else + ifneq ($(MASTER),left) +$(error MASTER does not have a valid value(left/right)) + endif +endif + + # Version string OPT_DEFS += -DVERSION=$(shell (git describe --always --dirty || echo 'unknown') 2> /dev/null) diff --git a/tmk_core/common/avr/bootloader.c b/tmk_core/common/avr/bootloader.c index 7c744e8c7..fb9bf2d1c 100644 --- a/tmk_core/common/avr/bootloader.c +++ b/tmk_core/common/avr/bootloader.c @@ -73,27 +73,47 @@ uint32_t reset_key __attribute__ ((section (".noinit"))); /* initialize MCU status by watchdog reset */ void bootloader_jump(void) { -#ifdef PROTOCOL_LUFA - USB_Disable(); - cli(); - _delay_ms(2000); -#endif + #ifndef CATERINA_BOOTLOADER -#ifdef PROTOCOL_PJRC - cli(); - UDCON = 1; - USBCON = (1<. #include "sendchar.h" #include "eeconfig.h" #include "backlight.h" +#include "action_layer.h" #ifdef BOOTMAGIC_ENABLE # include "bootmagic.h" #else @@ -49,6 +50,12 @@ along with this program. If not, see . #ifdef RGBLIGHT_ENABLE # include "rgblight.h" #endif +#ifdef SERIAL_LINK_ENABLE +# include "serial_link/system/serial_link.h" +#endif +#ifdef VISUALIZER_ENABLE +# include "visualizer/visualizer.h" +#endif #ifdef MATRIX_HAS_GHOST static bool has_ghost_in_row(uint8_t row) @@ -167,11 +174,19 @@ MATRIX_LOOP_END: #endif #ifdef SERIAL_MOUSE_ENABLE - serial_mouse_task(); + serial_mouse_task(); #endif #ifdef ADB_MOUSE_ENABLE - adb_mouse_task(); + adb_mouse_task(); +#endif + +#ifdef SERIAL_LINK_ENABLE + serial_link_update(); +#endif + +#ifdef VISUALIZER_ENABLE + visualizer_update(default_layer_state, layer_state, host_keyboard_leds()); #endif // update LED diff --git a/tmk_core/common/matrix.h b/tmk_core/common/matrix.h index 71153a5f5..cee3593ee 100644 --- a/tmk_core/common/matrix.h +++ b/tmk_core/common/matrix.h @@ -72,6 +72,11 @@ void matrix_scan_kb(void); void matrix_init_user(void); void matrix_scan_user(void); +#ifdef I2C_SPLIT + void slave_matrix_init(void); + uint8_t slave_matrix_scan(void); +#endif + #ifdef __cplusplus } #endif diff --git a/tmk_core/protocol/chibios/main.c b/tmk_core/protocol/chibios/main.c index 54bb6a8f5..b0eb9aef8 100644 --- a/tmk_core/protocol/chibios/main.c +++ b/tmk_core/protocol/chibios/main.c @@ -35,6 +35,12 @@ #ifdef SLEEP_LED_ENABLE #include "sleep_led.h" #endif +#ifdef SERIAL_LINK_ENABLE +#include "serial_link/system/serial_link.h" +#endif +#ifdef VISUALIZER_ENABLE +#include "visualizer/visualizer.h" +#endif #include "suspend.h" @@ -98,9 +104,32 @@ int main(void) { /* init printf */ init_printf(NULL,sendchar_pf); - /* Wait until the USB is active */ - while(USB_DRIVER.state != USB_ACTIVE) +#ifdef SERIAL_LINK_ENABLE + init_serial_link(); +#endif + +#ifdef VISUALIZER_ENABLE + visualizer_init(); +#endif + + + host_driver_t* driver = NULL; + + /* Wait until the USB or serial link is active */ + while (true) { + if(USB_DRIVER.state == USB_ACTIVE) { + driver = &chibios_driver; + break; + } +#ifdef SERIAL_LINK_ENABLE + if(is_serial_link_connected()) { + driver = get_serial_link_driver(); + break; + } + serial_link_update(); +#endif chThdSleepMilliseconds(50); + } /* Do need to wait here! * Otherwise the next print might start a transfer on console EP @@ -113,7 +142,7 @@ int main(void) { /* init TMK modules */ keyboard_init(); - host_set_driver(&chibios_driver); + host_set_driver(driver); #ifdef SLEEP_LED_ENABLE sleep_led_init(); @@ -126,8 +155,14 @@ int main(void) { if(USB_DRIVER.state == USB_SUSPENDED) { print("[s]"); +#ifdef VISUALIZER_ENABLE + visualizer_suspend(); +#endif while(USB_DRIVER.state == USB_SUSPENDED) { /* Do this in the suspended state */ +#ifdef SERIAL_LINK_ENABLE + serial_link_update(); +#endif suspend_power_down(); // on AVR this deep sleeps for 15ms /* Remote wakeup */ if((USB_DRIVER.status & 2) && suspend_wakeup_condition()) { @@ -140,6 +175,10 @@ int main(void) { #ifdef MOUSEKEY_ENABLE mousekey_send(); #endif /* MOUSEKEY_ENABLE */ + +#ifdef VISUALIZER_ENABLE + visualizer_resume(); +#endif } keyboard_task(); diff --git a/tmk_core/rules.mk b/tmk_core/rules.mk index 7d3d8f9a6..352e9314b 100644 --- a/tmk_core/rules.mk +++ b/tmk_core/rules.mk @@ -234,6 +234,7 @@ MSG_COFF = Converting to AVR COFF: MSG_EXTENDED_COFF = Converting to AVR Extended COFF: MSG_FLASH = Creating load file for Flash: MSG_EEPROM = Creating load file for EEPROM: +MSG_BIN = Creating binary load file for Flash: MSG_EXTENDED_LISTING = Creating Extended Listing: MSG_SYMBOL_TABLE = Creating Symbol Table: MSG_LINKING = Linking: @@ -369,6 +370,11 @@ gccversion : $(eval CMD=$(NM) -n $< > $@ ) @$(BUILD_CMD) +%.bin: %.elf + @$(SILENT) || printf "$(MSG_BIN) $@" | $(AWK_CMD) + $(eval CMD=$(BIN) $< $@ || exit 0) + @$(BUILD_CMD) + # Create library from object files. .SECONDARY : $(BUILD_DIR)/$(TARGET).a .PRECIOUS : $(OBJ)