diff --git a/keyboards/nyquist/rev3/config.h b/keyboards/nyquist/rev3/config.h
index 8054ba79c..0caf8c423 100644
--- a/keyboards/nyquist/rev3/config.h
+++ b/keyboards/nyquist/rev3/config.h
@@ -33,6 +33,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 // wiring of each half
 #define MATRIX_ROW_PINS { F0, F5, D7, F6, F7 }
 #define MATRIX_COL_PINS { F1, F4, B7, D2, D3, D4 }
+#define SPLIT_HAND_PIN D5
 
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
@@ -58,11 +59,11 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /* ws2812 RGB LED */
 #define RGB_DI_PIN B4
-#define RGBLIGHT_TIMER
+#define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 12
 
 /* Backlight LEDs */
-#define BACKLIGHT_PIN D5
+#define BACKLIGHT_PIN B5
 #define BACKLIGHT_LEVELS 7
 
 /*
diff --git a/keyboards/nyquist/rev3/rev3.h b/keyboards/nyquist/rev3/rev3.h
index 3a3141f6e..274b83926 100644
--- a/keyboards/nyquist/rev3/rev3.h
+++ b/keyboards/nyquist/rev3/rev3.h
@@ -11,33 +11,6 @@
 #endif
 #endif
 
-//void promicro_bootloader_jmp(bool program);
-
-#ifndef FLIP_HALF
-// Standard Keymap
-// (TRRS jack on the left half is to the right, TRRS jack on the right half is to the left)
-#define LAYOUT( \
-	L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
-	L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
-	L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
-	L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35, \
-    L40, L41, L42, L43, L44, L45, R40, R41, R42, R43, R44, R45 \
-	) \
-	{ \
-		{ L00, L01, L02, L03, L04, L05 }, \
-		{ L10, L11, L12, L13, L14, L15 }, \
-		{ L20, L21, L22, L23, L24, L25 }, \
-		{ L30, L31, L32, L33, L34, L35 }, \
-		{ L40, L41, L42, L43, L44, L45 }, \
-		{ R05, R04, R03, R02, R01, R00 }, \
-		{ R15, R14, R13, R12, R11, R10 }, \
-		{ R25, R24, R23, R22, R21, R20 }, \
-		{ R35, R34, R33, R32, R31, R30 }, \
-		{ R45, R44, R43, R42, R41, R40 } \
-	}
-#else
-// Keymap with right side flipped
-// (TRRS jack on both halves are to the right)
 #define LAYOUT( \
 	L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
 	L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
@@ -57,7 +30,5 @@
 		{ R30, R31, R32, R33, R34, R35 }, \
 		{ R40, R41, R42, R43, R44, R45 } \
 	}
-#endif
 
 #define LAYOUT_ortho_5x12 LAYOUT
-
diff --git a/keyboards/nyquist/rev3/rules.mk b/keyboards/nyquist/rev3/rules.mk
index bd518d8f2..31077066a 100644
--- a/keyboards/nyquist/rev3/rules.mk
+++ b/keyboards/nyquist/rev3/rules.mk
@@ -1 +1,2 @@
 BACKLIGHT_ENABLE = yes
+RGBLIGHT_ENABLE = yes