From 7aa4cc9603b8cdb0ea3ede753eff7d07a86a18b0 Mon Sep 17 00:00:00 2001 From: itsnoteasy Date: Wed, 10 Jun 2020 22:23:11 +0100 Subject: [PATCH] adds support for the atmega328 (#9043) Co-authored-by: Ryan --- docs/adc_driver.md | 4 ++-- docs/compatible_microcontrollers.md | 1 + docs/feature_backlight.md | 2 +- docs/spi_driver.md | 2 +- drivers/avr/analog.c | 4 ++-- drivers/avr/spi_master.c | 2 +- drivers/avr/spi_master.h | 2 +- quantum/backlight/backlight_avr.c | 2 +- quantum/config_common.h | 2 +- quantum/mcu_selection.mk | 18 ++++++++++++++++++ tmk_core/common/avr/bootloader.c | 2 +- tmk_core/common/uart.c | 2 +- 12 files changed, 31 insertions(+), 12 deletions(-) diff --git a/docs/adc_driver.md b/docs/adc_driver.md index 7c4e05efc..f8fb94094 100644 --- a/docs/adc_driver.md +++ b/docs/adc_driver.md @@ -22,7 +22,7 @@ Then place this include at the top of your code: ### AVR -|Channel|AT90USB64/128|ATmega16/32U4|ATmega32A|ATmega328P| +|Channel|AT90USB64/128|ATmega16/32U4|ATmega32A|ATmega328/P| |-------|-------------|-------------|---------|----------| |0 |`F0` |`F0` |`A0` |`C0` | |1 |`F1` |`F1` |`A1` |`C1` | @@ -39,7 +39,7 @@ Then place this include at the top of your code: |12 | |`B5` | | | |13 | |`B6` | | | -\* The ATmega328P possesses two extra ADC channels; however, they are not present on the DIP pinout, and are not shared with GPIO pins. You can use `adc_read()` directly to gain access to these. +\* The ATmega328/P possesses two extra ADC channels; however, they are not present on the DIP pinout, and are not shared with GPIO pins. You can use `adc_read()` directly to gain access to these. ### ARM diff --git a/docs/compatible_microcontrollers.md b/docs/compatible_microcontrollers.md index 85dd440d3..ac90ed746 100644 --- a/docs/compatible_microcontrollers.md +++ b/docs/compatible_microcontrollers.md @@ -14,6 +14,7 @@ Certain MCUs which do not have native USB will use [V-USB](https://www.obdev.at/ * [ATmega32A](https://www.microchip.com/wwwproducts/en/ATmega32A) * [ATmega328P](https://www.microchip.com/wwwproducts/en/ATmega328P) +* [ATmega328](https://www.microchip.com/wwwproducts/en/ATmega328) ## ARM diff --git a/docs/feature_backlight.md b/docs/feature_backlight.md index 5f69468c3..7e4401b40 100644 --- a/docs/feature_backlight.md +++ b/docs/feature_backlight.md @@ -89,7 +89,7 @@ BACKLIGHT_DRIVER = pwm Hardware PWM is supported according to the following table: -|Backlight Pin|AT90USB64/128|ATmega16/32U4|ATmega16/32U2|ATmega32A|ATmega328P| +|Backlight Pin|AT90USB64/128|ATmega16/32U4|ATmega16/32U2|ATmega32A|ATmega328/P| |-------------|-------------|-------------|-------------|---------|----------| |`B1` | | | | |Timer 1 | |`B2` | | | | |Timer 1 | diff --git a/docs/spi_driver.md b/docs/spi_driver.md index c170bf1df..1d432432a 100644 --- a/docs/spi_driver.md +++ b/docs/spi_driver.md @@ -11,7 +11,7 @@ No special setup is required - just connect the `SS`, `SCK`, `MOSI` and `MISO` p |ATMega16/32U2/4|`B0`|`B1` |`B2` |`B3` | |AT90USB64/128 |`B0`|`B1` |`B2` |`B3` | |ATmega32A |`B4`|`B7` |`B5` |`B6` | -|ATmega328P |`B2`|`B5` |`B3` |`B4` | +|ATmega328/P |`B2`|`B5` |`B3` |`B4` | You may use more than one slave select pin, not just the `SS` pin. This is useful when you have multiple devices connected and need to communicate with them individually. `SPI_SS_PIN` can be passed to `spi_start()` to refer to `SS`. diff --git a/drivers/avr/analog.c b/drivers/avr/analog.c index abe478b71..9b8397b93 100644 --- a/drivers/avr/analog.c +++ b/drivers/avr/analog.c @@ -38,7 +38,7 @@ int16_t analogRead(uint8_t pin) { // clang-format on if (pin >= 12) return 0; return adc_read(pgm_read_byte(pin_to_mux + pin)); -#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) || defined(__AVR_ATmega328P__) +#elif defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB1287__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__) if (pin >= 8) return 0; return adc_read(pin); #else @@ -85,7 +85,7 @@ uint8_t pinToMux(pin_t pin) { case A6: return _BV(MUX2) | _BV(MUX1); // ADC6 case A7: return _BV(MUX2) | _BV(MUX1) | _BV(MUX0); // ADC7 default: return _BV(MUX4) | _BV(MUX3) | _BV(MUX2) | _BV(MUX1) | _BV(MUX0); // 0V -#elif defined(__AVR_ATmega328P__) +#elif defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__) case C0: return 0; // ADC0 case C1: return _BV(MUX0); // ADC1 case C2: return _BV(MUX1); // ADC2 diff --git a/drivers/avr/spi_master.c b/drivers/avr/spi_master.c index 32cc55c83..f91baf70b 100644 --- a/drivers/avr/spi_master.c +++ b/drivers/avr/spi_master.c @@ -28,7 +28,7 @@ # define SPI_SCK_PIN B7 # define SPI_MOSI_PIN B5 # define SPI_MISO_PIN B6 -#elif defined(__AVR_ATmega328P__) +#elif defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__) # define SPI_SCK_PIN B5 # define SPI_MOSI_PIN B3 # define SPI_MISO_PIN B4 diff --git a/drivers/avr/spi_master.h b/drivers/avr/spi_master.h index b69c1cbd6..e36a7c21c 100644 --- a/drivers/avr/spi_master.h +++ b/drivers/avr/spi_master.h @@ -25,7 +25,7 @@ typedef int16_t spi_status_t; # define SPI_SS_PIN B0 #elif defined(__AVR_ATmega32A__) # define SPI_SS_PIN B4 -#elif defined(__AVR_ATmega328P__) +#elif defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__) # define SPI_SS_PIN B2 #endif diff --git a/quantum/backlight/backlight_avr.c b/quantum/backlight/backlight_avr.c index ce13f1118..b3e882ffe 100644 --- a/quantum/backlight/backlight_avr.c +++ b/quantum/backlight/backlight_avr.c @@ -103,7 +103,7 @@ # define COMxx1 COM1A1 # define OCRxx OCR1A # endif -#elif defined(__AVR_ATmega328P__) && (BACKLIGHT_PIN == B1 || BACKLIGHT_PIN == B2) +#elif (defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__)) && (BACKLIGHT_PIN == B1 || BACKLIGHT_PIN == B2) # define HARDWARE_PWM # define ICRx ICR1 # define TCCRxA TCCR1A diff --git a/quantum/config_common.h b/quantum/config_common.h index 9861c8678..9b28e8d63 100644 --- a/quantum/config_common.h +++ b/quantum/config_common.h @@ -58,7 +58,7 @@ # define PINC_ADDRESS 0x3 # define PINB_ADDRESS 0x6 # define PINA_ADDRESS 0x9 -# elif defined(__AVR_ATmega328P__) +# elif defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__) # define ADDRESS_BASE 0x00 # define PINB_ADDRESS 0x3 # define PINC_ADDRESS 0x6 diff --git a/quantum/mcu_selection.mk b/quantum/mcu_selection.mk index 33de162bb..a1d2c5fbf 100644 --- a/quantum/mcu_selection.mk +++ b/quantum/mcu_selection.mk @@ -288,6 +288,24 @@ ifneq (,$(filter $(MCU),atmega328p)) NO_SUSPEND_POWER_DOWN ?= yes endif +ifneq (,$(filter $(MCU),atmega328)) + # MCU name for avrdude + AVRDUDE_MCU = m328 + + PROTOCOL = VUSB + + # Processor frequency. + # This will define a symbol, F_CPU, in all source code files equal to the + # processor frequency in Hz. You can then use this symbol in your source code to + # calculate timings. Do NOT tack on a 'UL' at the end, this will be done + # automatically to create a 32-bit value in your source code. + F_CPU ?= 16000000 + + # unsupported features for now + NO_UART ?= yes + NO_SUSPEND_POWER_DOWN ?= yes +endif + ifneq (,$(filter $(MCU),attiny85)) PROTOCOL = VUSB diff --git a/tmk_core/common/avr/bootloader.c b/tmk_core/common/avr/bootloader.c index 7e5d2b057..a1db55da9 100644 --- a/tmk_core/common/avr/bootloader.c +++ b/tmk_core/common/avr/bootloader.c @@ -247,7 +247,7 @@ void bootloader_jump(void) { #else // Assume remaining boards are DFU, even if the flag isn't set -# if !(defined(__AVR_ATmega32A__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATtiny85__)) // no USB - maybe BOOTLOADER_BOOTLOADHID instead though? +# if !(defined(__AVR_ATmega32A__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__) || defined(__AVR_ATtiny85__)) // no USB - maybe BOOTLOADER_BOOTLOADHID instead though? UDCON = 1; USBCON = (1 << FRZCLK); // disable USB UCSR1B = 0; diff --git a/tmk_core/common/uart.c b/tmk_core/common/uart.c index b29d3bbb9..150e256c8 100644 --- a/tmk_core/common/uart.c +++ b/tmk_core/common/uart.c @@ -31,7 +31,7 @@ #include "uart.h" -#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega168P__) || defined(__AVR_ATmega328P__) +#if defined(__AVR_ATmega168__) || defined(__AVR_ATmega168P__) || defined(__AVR_ATmega328P__) || defined(__AVR_ATmega328__) # define UDRn UDR0 # define UBRRnL UBRR0L # define UCSRnA UCSR0A