diff --git a/keyboards/splitkb/kyria/keymaps/drashna/rules.mk b/keyboards/splitkb/kyria/keymaps/drashna/rules.mk index b51cc1b62..f2ae5a191 100644 --- a/keyboards/splitkb/kyria/keymaps/drashna/rules.mk +++ b/keyboards/splitkb/kyria/keymaps/drashna/rules.mk @@ -12,11 +12,11 @@ COMMAND_ENABLE = no # Commands for debug and configuration NKRO_ENABLE = yes # USB Nkey Rollover UNICODE_ENABLE = no # Unicode KEY_LOCK_ENABLE = no +CTPC = yes - -BOOTLOADER = hid -BOOTLOADER_SIZE = 512 -PROGRAM_CMD = $(HID_BOOTLOADER_CLI) -mmcu=$(MCU) -w -v $(BUILD_DIR)/$(TARGET).hex +# BOOTLOADER = hid +# BOOTLOADER_SIZE = 512 +# PROGRAM_CMD = $(HID_BOOTLOADER_CLI) -mmcu=$(MCU) -w -v $(BUILD_DIR)/$(TARGET).hex # TAP_DANCE_ENABLE = yes WPM_ENABLE = yes diff --git a/keyboards/splitkb/kyria/readme.md b/keyboards/splitkb/kyria/readme.md index 5ce652589..7ecf3946f 100644 --- a/keyboards/splitkb/kyria/readme.md +++ b/keyboards/splitkb/kyria/readme.md @@ -10,7 +10,8 @@ Hardware Availability: [splitkb.com](https://splitkb.com) and partners. Make example for this keyboard (after setting up your build environment): - make splitkb/kyria:default + make splitkb/kyria/rev1:default + make splitkb/kyria/rev1/proton_c:default Example of flashing this keyboard: @@ -19,3 +20,22 @@ Example of flashing this keyboard: See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). A build guide for the Kyria can be found at [docs.splitkb.com](https://docs.splitkb.com/hc/en-us/articles/360010552059-Kyria-Build-Guide-Introduction). + +## Proton C Conversion Guide + +If you're one of the lucky people to have Proton Cs to use with their Kyria, there are a couple of caveats to getting this working. + +1. You need to have 2x Proton Cs, as you cannot mix and match with Pro Micros or Elite C's. They both need to be Proton Cs. +2. You'll need to do some modding to enable proper support with the Proton C. + +By design, the Kyria uses every available pin on the Pro Micro footprint. This includes using D3 (RX) for RGB. This poses a challenge with using the Proton C, since it needs both the TX and RX pins. The Proton C needs both pins, especially if you plan on using Full Duplex Serial. + +To fix this, you need to break off the last header position on the right-hand side on the footprint. This is the `TX0/D3` pad. Leave this pad without a header connected to. + +From the A9 pin on the Proton C, you want to run a wire from it to the `SDA + Extra Data` pad near the TRRS jack on the PCB. This will allow for proper, full duplex communication over the TRRS cable. + +To get RGB working properly, as well, you want to run a wire from the `A3` pin on the Proton C, next to the GND and DFU pin, right under the USB port. Run this to the `TX0/D3` pad (the one you left without a header pin on the PCB). + +Once you've done that, you can solder in the Proton C. and flash it. + +![Proton C](https://i.imgur.com/nICqWLo.jpg) diff --git a/keyboards/splitkb/kyria/rev1/config.h b/keyboards/splitkb/kyria/rev1/config.h index a330dfc10..e19e8dfa9 100644 --- a/keyboards/splitkb/kyria/rev1/config.h +++ b/keyboards/splitkb/kyria/rev1/config.h @@ -57,18 +57,31 @@ along with this program. If not, see . /* * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. */ -#define SOFT_SERIAL_PIN D2 -#define RGB_DI_PIN D3 +#if defined(CONVERT_TO_PROTON_C) +# define SERIAL_USART_FULL_DUPLEX // Enable full duplex operation mode. +# define SERIAL_USART_PIN_SWAP // Swap TX and RX pins if keyboard is master halve. +# define SERIAL_USART_DRIVER SD1 // USART driver of TX pin. default: SD1 +# define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 +# define SERIAL_USART_TX_PIN D3 +# define SERIAL_USART_RX_PIN D2 + +# define RGB_DI_PIN PAL_LINE(GPIOA, 3) +# define WS2812_PWM_DRIVER PWMD2 // default: PWMD2 +# define WS2812_PWM_CHANNEL 4 // default: 2 +# define WS2812_PWM_PAL_MODE 1 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 2 +# define WS2812_DMA_STREAM STM32_DMA1_STREAM2 // DMA Stream for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. +# define WS2812_DMA_CHANNEL 2 // DMA Channel for TIMx_UP, see the respective reference manual for the appropriate values for your MCU. +# define WS2812_DMAMUX_ID STM32_DMAMUX1_TIM2_UP // DMAMUX configuration for TIMx_UP -- only required if your MCU has a DMAMUX peripheral, see the respective reference manual for the appropriate values for your MCU. +#else +# define RGB_DI_PIN D3 +# define SOFT_SERIAL_PIN D2 +#endif + #define RGBLED_SPLIT \ { 10, 10 } #define RGBLED_NUM 20 -/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ -#define LOCKING_SUPPORT_ENABLE -/* Locking resynchronize hack */ -#define LOCKING_RESYNC_ENABLE - #ifdef OLED_ENABLE # define OLED_DISPLAY_128X64 # define SPLIT_OLED_ENABLE diff --git a/keyboards/splitkb/kyria/rev1/proton_c/chconf.h b/keyboards/splitkb/kyria/rev1/proton_c/chconf.h new file mode 100644 index 000000000..7ca1d3d24 --- /dev/null +++ b/keyboards/splitkb/kyria/rev1/proton_c/chconf.h @@ -0,0 +1,22 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#define CH_CFG_ST_RESOLUTION 16 +#define CH_CFG_ST_FREQUENCY 10000 + +#include_next "chconf.h" diff --git a/keyboards/splitkb/kyria/rev1/proton_c/halconf.h b/keyboards/splitkb/kyria/rev1/proton_c/halconf.h new file mode 100644 index 000000000..99f2e11b9 --- /dev/null +++ b/keyboards/splitkb/kyria/rev1/proton_c/halconf.h @@ -0,0 +1,22 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#define HAL_USE_I2C TRUE +#define HAL_USE_PWM TRUE +#define HAL_USE_SERIAL TRUE + +#include_next diff --git a/keyboards/splitkb/kyria/rev1/proton_c/mcuconf.h b/keyboards/splitkb/kyria/rev1/proton_c/mcuconf.h new file mode 100644 index 000000000..58348af39 --- /dev/null +++ b/keyboards/splitkb/kyria/rev1/proton_c/mcuconf.h @@ -0,0 +1,29 @@ +/* Copyright 2020 QMK + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#include_next + +#undef STM32_PWM_USE_TIM2 +#define STM32_PWM_USE_TIM2 TRUE +#undef STM32_PWM_USE_TIM3 +#define STM32_PWM_USE_TIM3 FALSE + +#undef STM32_SERIAL_USE_USART1 +#define STM32_SERIAL_USE_USART1 TRUE + +#undef STM32_ST_USE_TIMER +#define STM32_ST_USE_TIMER 3 diff --git a/keyboards/splitkb/kyria/rev1/proton_c/proton_c.c b/keyboards/splitkb/kyria/rev1/proton_c/proton_c.c new file mode 100644 index 000000000..628fabb2e --- /dev/null +++ b/keyboards/splitkb/kyria/rev1/proton_c/proton_c.c @@ -0,0 +1,17 @@ +/* Copyright 2019 Thomas Baart + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "proton_c.h" diff --git a/keyboards/splitkb/kyria/rev1/proton_c/proton_c.h b/keyboards/splitkb/kyria/rev1/proton_c/proton_c.h new file mode 100644 index 000000000..718f5636f --- /dev/null +++ b/keyboards/splitkb/kyria/rev1/proton_c/proton_c.h @@ -0,0 +1,19 @@ +/* Copyright 2019 Thomas Baart + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "rev1.h" diff --git a/keyboards/splitkb/kyria/rev1/proton_c/rules.mk b/keyboards/splitkb/kyria/rev1/proton_c/rules.mk new file mode 100644 index 000000000..9e0942398 --- /dev/null +++ b/keyboards/splitkb/kyria/rev1/proton_c/rules.mk @@ -0,0 +1,5 @@ +WS2812_DRIVER = pwm +SERIAL_DRIVER = usart +AUDIO_ENABLE = no +LTO_ENABLE = no +CONVERT_TO_PROTON_C = yes diff --git a/keyboards/splitkb/kyria/rev1/rev1.h b/keyboards/splitkb/kyria/rev1/rev1.h index bf9864fe3..8a5fbeb21 100644 --- a/keyboards/splitkb/kyria/rev1/rev1.h +++ b/keyboards/splitkb/kyria/rev1/rev1.h @@ -16,6 +16,9 @@ #pragma once #include "kyria.h" +#ifdef KEYBOARD_splitkb_kyria_rev1_proton_c +# include "proton_c.h" +#endif /* This a shortcut to help you visually see your layout. *