diff --git a/keyboards/dk60/Makefile b/keyboards/dk60/Makefile new file mode 100644 index 000000000..4e2a6f00f --- /dev/null +++ b/keyboards/dk60/Makefile @@ -0,0 +1,3 @@ +ifndef MAKEFILE_INCLUDED + include ../../Makefile +endif \ No newline at end of file diff --git a/keyboards/dk60/config.h b/keyboards/dk60/config.h new file mode 100644 index 000000000..e586056cf --- /dev/null +++ b/keyboards/dk60/config.h @@ -0,0 +1,56 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H + #define CONFIG_H + + #include "config_common.h" + + /* USB Device descriptor parameter */ + #define VENDOR_ID 0xFEED + #define PRODUCT_ID 0x6060 + #define DEVICE_VER 0x0003 + #define MANUFACTURER DARKOU + #define PRODUCT DK60 + #define DESCRIPTION QMK keyboard firmware for DK60 support + + /* key matrix size */ + #define MATRIX_ROWS 5 + #define MATRIX_COLS 13 + + // ROWS: Top to bottom, COLS: Left to right + + #define MATRIX_ROW_PINS { B6, B4, D7, D6, D4 } + #define MATRIX_COL_PINS { B0, B3, B2, B1, D3, D5, B5, B7, C6, C7, D0, D1, D2 } + #define UNUSED_PINS + + /* COL2ROW or ROW2COL */ + #define DIODE_DIRECTION COL2ROW + + /* Set 0 if debouncing isn't needed */ + #define DEBOUNCING_DELAY 5 + + /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ + #define LOCKING_SUPPORT_ENABLE + /* Locking resynchronize hack */ + #define LOCKING_RESYNC_ENABLE + + /* key combination for command */ + #define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ + ) +#endif diff --git a/keyboards/dk60/dk60.c b/keyboards/dk60/dk60.c new file mode 100644 index 000000000..93aeb33b4 --- /dev/null +++ b/keyboards/dk60/dk60.c @@ -0,0 +1,34 @@ +#include "dk60.h" + +void dk60_blink_all_leds(void) +{ + dk60_led_all_off(); + dk60_led_all_on(); + _delay_ms(500); + dk60_led_all_off(); +} + +void matrix_init_kb(void) { + led_init_ports(); + dk60_blink_all_leds(); + + matrix_init_user(); +} + +void led_init_ports(void) { + // * Set our LED pins as output + DDRE |= (1<<6); + DDRF |= (1<<0); +} + +void led_set_kb(uint8_t usb_led) { + if (usb_led & (1< +// #include "led.h" + + inline void dk60_caps_led_on(void) { PORTE |= (1<<6); } + inline void dk60_esc_led_on(void) { PORTF |= (1<<0); } + + inline void dk60_caps_led_off(void) { PORTE &= ~(1<<6); } + inline void dk60_esc_led_off(void) { PORTF &= ~(1<<0); } + + inline void dk60_led_all_on(void) + { + dk60_caps_led_on(); + dk60_esc_led_on(); + } + + inline void dk60_led_all_off(void) + { + dk60_caps_led_off(); + dk60_esc_led_off(); + } + + #define ___ KC_NO + + #define KEYMAP( \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K4B, K4A, \ + K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K4C, \ + K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, \ + K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, \ + K41, K42, K45, K48, K49 \ + ) { \ + { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C }, \ + { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C }, \ + { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C }, \ + { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C }, \ + { ___, K41, K42, ___, ___, K45, ___, ___, K48, K49, K4A, K4B, K4C } \ + } + +#endif diff --git a/keyboards/dk60/keymaps/default/keymap.c b/keyboards/dk60/keymaps/default/keymap.c new file mode 100644 index 000000000..a6a3b83f0 --- /dev/null +++ b/keyboards/dk60/keymaps/default/keymap.c @@ -0,0 +1,80 @@ +#include "dk60.h" +#include "action_layer.h" + +enum planck_layers { + _QWERTY, + _FN, + _DVORAK, + _LOWER, + _RAISE, + _PLOVER, + _ADJUST +}; + +enum planck_keycodes { + QWERTY = SAFE_RANGE, + FN +}; + +// Fillers to make layering more clear +#define ______ KC_TRNS + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Qwerty gui/alt/space/alt/gui + * ,-----------------------------------------------------------------------------------------. + * | Esc | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | \ | ` | + * |-----------------------------------------------------------------------------------------+ + * | Tab | Q | W | E | R | T | Y | U | I | O | P | [ | ] | Bksp | + * |-----------------------------------------------------------------------------------------+ + * | Ctrl | A | S | D | F | G | H | J | K | L | ; | ' | Enter | + * |-----------------------------------------------------------------------------------------+ + * | Shift | Z | X | C | V | B | N | M | , | . | / | RShift | FN | + * |-----------------------------------------------------------------------------------------+ + * |LGUI | LAlt | Space | RAlt |RGUI | + * `-----------------------------------------------------------------' + */ + [_QWERTY] = KEYMAP( /* Basic QWERTY */ + KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, \ + KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,KC_BSPC, \ + KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \ + KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, FN, \ + KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI \ + ), + +/* FN Layer + * ,-----------------------------------------------------------------------------------------. + * | | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 | Ins | Del | + * |-----------------------------------------------------------------------------------------+ + * | CAPS | | | | | | | | Psc | Slck| Paus| Up | | | + * |-----------------------------------------------------------------------------------------+ + * | | Vol-| Vol+| Mute| | | * | / | Home| PgUp| Left|Right| | + * |-----------------------------------------------------------------------------------------+ + * | | Prev| Play| Next| | | + | - | End |PgDn| Down| | | + * |-----------------------------------------------------------------------------------------+ + * | | | | Stop | | + * `-----------------------------------------------------------------' + */ + [_FN] = KEYMAP( /* Layer 1 */ + ______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_INS, KC_DEL, \ + KC_CAPS, ______, ______, ______, ______, ______, ______, ______, KC_PSCR, KC_SLCK, KC_PAUS, KC_UP, ______, ______, \ + ______, KC_VOLD,KC_VOLU,KC_MUTE,______, ______, KC_PAST,KC_PSLS,KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, ______, \ + ______, KC_MPRV,KC_MPLY,KC_MNXT,______, ______, KC_PPLS,KC_PMNS,KC_END, KC_PGDN, KC_DOWN, ______, ______, \ + ______, ______, ______, KC_MSTP, ______ \ + ) +}; + +bool process_record_user(uint16_t keycode, keyrecord_t *record) { + switch (keycode) { + case FN: + if (record->event.pressed) { + layer_on(_FN); + dk60_esc_led_on(); + } else { + layer_off(_FN); + dk60_esc_led_off(); + } + return false; + break; + } + return true; +} diff --git a/keyboards/dk60/readme.md b/keyboards/dk60/readme.md new file mode 100644 index 000000000..82e6d0c32 --- /dev/null +++ b/keyboards/dk60/readme.md @@ -0,0 +1,6 @@ +DK60 keyboard firmware +====================== + +Another 60% keyboard with different HHKB layout + +More information here: https://github.com/Dbroqua/MX_HHKB \ No newline at end of file diff --git a/keyboards/dk60/rules.mk b/keyboards/dk60/rules.mk new file mode 100644 index 000000000..36c6bed17 --- /dev/null +++ b/keyboards/dk60/rules.mk @@ -0,0 +1,21 @@ +MCU = atmega32u4 +F_CPU = 16000000 +ARCH = AVR8 +F_USB = $(F_CPU) +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + +BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE ?= no # Mouse keys(+4700) +EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450) +# CONSOLE_ENABLE ?= yes # Console for debug(+400) +# COMMAND_ENABLE ?= yes # Commands for debug and configuration +KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key +NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work +RGBLIGHT_ENABLE ?= no # Enable keyboard underlight functionality (+4870) +BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality (+1150) +MIDI_ENABLE ?= no # MIDI controls +AUDIO_ENABLE ?= no +UNICODE_ENABLE ?= yes # Unicode +BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID +SLEEP_LED_ENABLE ?= yes