From 4f5f1a53d449172263e83c5769c92976e0d3332e Mon Sep 17 00:00:00 2001 From: tmk Date: Sat, 29 Jan 2011 00:44:05 +0900 Subject: [PATCH] added PS/2 to USB converter use V-USB as protocol stack --- Makefile.vusb | 618 +++++++++++++++++++++++++++++ print.c | 13 +- print.h | 4 +- ps2_vusb/Makefile | 50 +++ ps2_vusb/Makefile.orig | 165 ++++++++ ps2_vusb/config.h | 36 ++ ps2_vusb/keyboard.h | 27 ++ ps2_vusb/keyboard_vusb.c | 156 ++++++++ ps2_vusb/keymap.c | 189 +++++++++ ps2_vusb/layer.c | 183 +++++++++ ps2_vusb/main.c | 126 ++++++ ps2_vusb/matrix.c | 492 +++++++++++++++++++++++ ps2_vusb/usart_print.c | 53 +++ ps2_vusb/usart_print.h | 121 ++++++ ps2_vusb/usbconfig.h | 373 +++++++++++++++++ sendchar.h | 8 + timer.c | 14 +- timer.h | 2 +- usbdrv/Changelog.txt | 308 ++++++++++++++ usbdrv/CommercialLicense.txt | 166 ++++++++ usbdrv/License.txt | 361 +++++++++++++++++ usbdrv/Readme.txt | 172 ++++++++ usbdrv/USB-ID-FAQ.txt | 149 +++++++ usbdrv/USB-IDs-for-free.txt | 148 +++++++ usbdrv/asmcommon.inc | 188 +++++++++ usbdrv/oddebug.c | 50 +++ usbdrv/oddebug.h | 123 ++++++ usbdrv/usbconfig-prototype.h | 376 ++++++++++++++++++ usbdrv/usbdrv.c | 625 +++++++++++++++++++++++++++++ usbdrv/usbdrv.h | 735 ++++++++++++++++++++++++++++++++++ usbdrv/usbdrvasm.S | 393 ++++++++++++++++++ usbdrv/usbdrvasm.asm | 21 + usbdrv/usbdrvasm12.inc | 393 ++++++++++++++++++ usbdrv/usbdrvasm128.inc | 750 +++++++++++++++++++++++++++++++++++ usbdrv/usbdrvasm15.inc | 423 ++++++++++++++++++++ usbdrv/usbdrvasm16.inc | 346 ++++++++++++++++ usbdrv/usbdrvasm165.inc | 453 +++++++++++++++++++++ usbdrv/usbdrvasm18-crc.inc | 707 +++++++++++++++++++++++++++++++++ usbdrv/usbdrvasm20.inc | 360 +++++++++++++++++ usbdrv/usbportability.h | 144 +++++++ 40 files changed, 10003 insertions(+), 18 deletions(-) create mode 100644 Makefile.vusb create mode 100644 ps2_vusb/Makefile create mode 100644 ps2_vusb/Makefile.orig create mode 100644 ps2_vusb/config.h create mode 100644 ps2_vusb/keyboard.h create mode 100644 ps2_vusb/keyboard_vusb.c create mode 100644 ps2_vusb/keymap.c create mode 100644 ps2_vusb/layer.c create mode 100644 ps2_vusb/main.c create mode 100644 ps2_vusb/matrix.c create mode 100644 ps2_vusb/usart_print.c create mode 100644 ps2_vusb/usart_print.h create mode 100644 ps2_vusb/usbconfig.h create mode 100644 sendchar.h create mode 100644 usbdrv/Changelog.txt create mode 100644 usbdrv/CommercialLicense.txt create mode 100644 usbdrv/License.txt create mode 100644 usbdrv/Readme.txt create mode 100644 usbdrv/USB-ID-FAQ.txt create mode 100644 usbdrv/USB-IDs-for-free.txt create mode 100644 usbdrv/asmcommon.inc create mode 100644 usbdrv/oddebug.c create mode 100644 usbdrv/oddebug.h create mode 100644 usbdrv/usbconfig-prototype.h create mode 100644 usbdrv/usbdrv.c create mode 100644 usbdrv/usbdrv.h create mode 100644 usbdrv/usbdrvasm.S create mode 100644 usbdrv/usbdrvasm.asm create mode 100644 usbdrv/usbdrvasm12.inc create mode 100644 usbdrv/usbdrvasm128.inc create mode 100644 usbdrv/usbdrvasm15.inc create mode 100644 usbdrv/usbdrvasm16.inc create mode 100644 usbdrv/usbdrvasm165.inc create mode 100644 usbdrv/usbdrvasm18-crc.inc create mode 100644 usbdrv/usbdrvasm20.inc create mode 100644 usbdrv/usbportability.h diff --git a/Makefile.vusb b/Makefile.vusb new file mode 100644 index 000000000..b372ce252 --- /dev/null +++ b/Makefile.vusb @@ -0,0 +1,618 @@ +#---------------------------------------------------------------------------- +# On command line: +# +# make all = Make software. +# +# make clean = Clean out built project files. +# +# make coff = Convert ELF to AVR COFF. +# +# make extcoff = Convert ELF to AVR Extended COFF. +# +# make program = Download the hex file to the device, using avrdude. +# Please customize the avrdude settings below first! +# +# make debug = Start either simulavr or avarice as specified for debugging, +# with avr-gdb or avr-insight as the front end for debugging. +# +# make filename.s = Just compile filename.c into the assembler code only. +# +# make filename.i = Create a preprocessed source file for use in submitting +# bug reports to the GCC project. +# +# To rebuild project do "make clean" then "make all". +#---------------------------------------------------------------------------- + +# Following variables need to be set in /Makefile: +# TARGET +# COMMON_DIR +# TARGET_DIR +# TARGET_SRC +# MCU +# F_CPU + + +# List C source files here. (C dependencies are automatically generated.) +SRC = usbdrv.c \ + usbdrvasm.S \ + oddebug.c +SRC += $(TARGET_SRC) + +# Option modules +ifdef $(or MOUSEKEY_ENABLE, PS2_MOUSE_ENABLE) + SRC += usb_mouse.c +endif +ifdef MOUSEKEY_ENABLE + SRC += mousekey.c +endif +ifdef PS2_MOUSE_ENABLE + SRC += ps2.c \ + ps2_mouse.c +endif +ifdef USB_EXTRA_ENABLE + SRC += usb_extra.c +endif + + +# C source file search path +VPATH = $(TARGET_DIR):$(COMMON_DIR):$(COMMON_DIR)/usbdrv + + +# Output format. (can be srec, ihex, binary) +FORMAT = ihex + + +# Object files directory +# To put object files in current directory, use a dot (.), do NOT make +# this an empty or blank macro! +OBJDIR = . + + +# Optimization level, can be [0, 1, 2, 3, s]. +# 0 = turn off optimization. s = optimize for size. +# (Note: 3 is not always the best optimization level. See avr-libc FAQ.) +OPT = s + + +# Debugging format. +# Native formats for AVR-GCC's -g are dwarf-2 [default] or stabs. +# AVR Studio 4.10 requires dwarf-2. +# AVR [Extended] COFF format requires stabs, plus an avr-objcopy run. +DEBUG = dwarf-2 + + +# List any extra directories to look for include files here. +# Each directory must be seperated by a space. +# Use forward slashes for directory separators. +# For a directory that has spaces, enclose it in quotes. +#EXTRAINCDIRS = $(TARGET_DIR) $(COMMON_DIR) +EXTRAINCDIRS = $(subst :, ,$(VPATH)) + + +# Compiler flag to set the C Standard level. +# c89 = "ANSI" C +# gnu89 = c89 plus GCC extensions +# c99 = ISO C99 standard (not yet fully implemented) +# gnu99 = c99 plus GCC extensions +CSTANDARD = -std=gnu99 + + +#OPT_DEFS = +ifdef MOUSEKEY_ENABLE + OPT_DEFS += -DMOUSEKEY_ENABLE +endif +ifdef PS2_MOUSE_ENABLE + OPT_DEFS += -DPS2_MOUSE_ENABLE +endif +ifdef USB_EXTRA_ENABLE + OPT_DEFS += -DUSB_EXTRA_ENABLE +endif +ifdef USB_NKRO_ENABLE + OPT_DEFS += -DUSB_NKRO_ENABLE +endif +ifdef $(or MOUSEKEY_ENABLE, PS2_MOUSE_ENABLE) + OPT_DEFS += -DUSB_MOUSE_ENABLE +endif + +# Place -D or -U options here for C sources +CDEFS = -DF_CPU=$(F_CPU)UL +CDEFS += $(OPT_DEFS) + + +# Place -D or -U options here for ASM sources +ADEFS = -DF_CPU=$(F_CPU) +ADEFS += $(OPT_DEFS) + + +# Place -D or -U options here for C++ sources +CPPDEFS = -DF_CPU=$(F_CPU)UL +#CPPDEFS += -D__STDC_LIMIT_MACROS +#CPPDEFS += -D__STDC_CONSTANT_MACROS +CPPDEFS += $(OPT_DEFS) + + + +#---------------- Compiler Options C ---------------- +# -g*: generate debugging information +# -O*: optimization level +# -f...: tuning, see GCC manual and avr-libc documentation +# -Wall...: warning level +# -Wa,...: tell GCC to pass this to the assembler. +# -adhlns...: create assembler listing +CFLAGS = -g$(DEBUG) +CFLAGS += $(CDEFS) +CFLAGS += -O$(OPT) +CFLAGS += -funsigned-char +CFLAGS += -funsigned-bitfields +CFLAGS += -ffunction-sections +CFLAGS += -fpack-struct +CFLAGS += -fshort-enums +CFLAGS += -Wall +CFLAGS += -Wstrict-prototypes +#CFLAGS += -mshort-calls +#CFLAGS += -fno-unit-at-a-time +#CFLAGS += -Wundef +#CFLAGS += -Wunreachable-code +#CFLAGS += -Wsign-compare +CFLAGS += -Wa,-adhlns=$(@:%.o=%.lst) +CFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) +CFLAGS += $(CSTANDARD) +CFLAGS += -include config.h + + +#---------------- Compiler Options C++ ---------------- +# -g*: generate debugging information +# -O*: optimization level +# -f...: tuning, see GCC manual and avr-libc documentation +# -Wall...: warning level +# -Wa,...: tell GCC to pass this to the assembler. +# -adhlns...: create assembler listing +CPPFLAGS = -g$(DEBUG) +CPPFLAGS += $(CPPDEFS) +CPPFLAGS += -O$(OPT) +CPPFLAGS += -funsigned-char +CPPFLAGS += -funsigned-bitfields +CPPFLAGS += -fpack-struct +CPPFLAGS += -fshort-enums +CPPFLAGS += -fno-exceptions +CPPFLAGS += -Wall +CPPFLAGS += -Wundef +#CPPFLAGS += -mshort-calls +#CPPFLAGS += -fno-unit-at-a-time +#CPPFLAGS += -Wstrict-prototypes +#CPPFLAGS += -Wunreachable-code +#CPPFLAGS += -Wsign-compare +CPPFLAGS += -Wa,-adhlns=$(@:%.o=%.lst) +CPPFLAGS += $(patsubst %,-I%,$(EXTRAINCDIRS)) +#CPPFLAGS += $(CSTANDARD) +CPPFLAGS += -include config.h + + +#---------------- Assembler Options ---------------- +# -Wa,...: tell GCC to pass this to the assembler. +# -adhlns: create listing +# -gstabs: have the assembler create line number information; note that +# for use in COFF files, additional information about filenames +# and function names needs to be present in the assembler source +# files -- see avr-libc docs [FIXME: not yet described there] +# -listing-cont-lines: Sets the maximum number of continuation lines of hex +# dump that will be displayed for a given single line of source input. +ASFLAGS = $(ADEFS) -Wa,-adhlns=$(@:%.o=%.lst),-gstabs,--listing-cont-lines=100 +ASFLAGS += -include config.h + + +#---------------- Library Options ---------------- +# Minimalistic printf version +PRINTF_LIB_MIN = -Wl,-u,vfprintf -lprintf_min + +# Floating point printf version (requires MATH_LIB = -lm below) +PRINTF_LIB_FLOAT = -Wl,-u,vfprintf -lprintf_flt + +# If this is left blank, then it will use the Standard printf version. +PRINTF_LIB = +#PRINTF_LIB = $(PRINTF_LIB_MIN) +#PRINTF_LIB = $(PRINTF_LIB_FLOAT) + + +# Minimalistic scanf version +SCANF_LIB_MIN = -Wl,-u,vfscanf -lscanf_min + +# Floating point + %[ scanf version (requires MATH_LIB = -lm below) +SCANF_LIB_FLOAT = -Wl,-u,vfscanf -lscanf_flt + +# If this is left blank, then it will use the Standard scanf version. +SCANF_LIB = +#SCANF_LIB = $(SCANF_LIB_MIN) +#SCANF_LIB = $(SCANF_LIB_FLOAT) + + +MATH_LIB = -lm + + +# List any extra directories to look for libraries here. +# Each directory must be seperated by a space. +# Use forward slashes for directory separators. +# For a directory that has spaces, enclose it in quotes. +EXTRALIBDIRS = + + + +#---------------- External Memory Options ---------------- + +# 64 KB of external RAM, starting after internal RAM (ATmega128!), +# used for variables (.data/.bss) and heap (malloc()). +#EXTMEMOPTS = -Wl,-Tdata=0x801100,--defsym=__heap_end=0x80ffff + +# 64 KB of external RAM, starting after internal RAM (ATmega128!), +# only used for heap (malloc()). +#EXTMEMOPTS = -Wl,--section-start,.data=0x801100,--defsym=__heap_end=0x80ffff + +EXTMEMOPTS = + + + +#---------------- Linker Options ---------------- +# -Wl,...: tell GCC to pass this to linker. +# -Map: create map file +# --cref: add cross reference to map file +# +# Comennt out "--relax" option to avoid a error such: +# (.vectors+0x30): relocation truncated to fit: R_AVR_13_PCREL against symbol `__vector_12' +# +LDFLAGS = -Wl,-Map=$(TARGET).map,--cref +LDFLAGS += -Wl,--relax +LDFLAGS += -Wl,--gc-sections +LDFLAGS += $(EXTMEMOPTS) +LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) +LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) +#LDFLAGS += -T linker_script.x + + + +#---------------- Programming Options (avrdude) ---------------- + +# Programming hardware +# Type: avrdude -c ? +# to get a full listing. +# +AVRDUDE_PROGRAMMER = stk500v2 + +# com1 = serial port. Use lpt1 to connect to parallel port. +AVRDUDE_PORT = com1 # programmer connected to serial device + +AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex +#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep + + +# Uncomment the following if you want avrdude's erase cycle counter. +# Note that this counter needs to be initialized first using -Yn, +# see avrdude manual. +#AVRDUDE_ERASE_COUNTER = -y + +# Uncomment the following if you do /not/ wish a verification to be +# performed after programming the device. +#AVRDUDE_NO_VERIFY = -V + +# Increase verbosity level. Please use this when submitting bug +# reports about avrdude. See +# to submit bug reports. +#AVRDUDE_VERBOSE = -v -v + +AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER) +AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY) +AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE) +AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER) + + + +#---------------- Debugging Options ---------------- + +# For simulavr only - target MCU frequency. +DEBUG_MFREQ = $(F_CPU) + +# Set the DEBUG_UI to either gdb or insight. +# DEBUG_UI = gdb +DEBUG_UI = insight + +# Set the debugging back-end to either avarice, simulavr. +DEBUG_BACKEND = avarice +#DEBUG_BACKEND = simulavr + +# GDB Init Filename. +GDBINIT_FILE = __avr_gdbinit + +# When using avarice settings for the JTAG +JTAG_DEV = /dev/com1 + +# Debugging port used to communicate between GDB / avarice / simulavr. +DEBUG_PORT = 4242 + +# Debugging host used to communicate between GDB / avarice / simulavr, normally +# just set to localhost unless doing some sort of crazy debugging when +# avarice is running on a different computer. +DEBUG_HOST = localhost + + + +#============================================================================ + + +# Define programs and commands. +SHELL = sh +CC = avr-gcc +OBJCOPY = avr-objcopy +OBJDUMP = avr-objdump +SIZE = avr-size +AR = avr-ar rcs +NM = avr-nm +AVRDUDE = avrdude +REMOVE = rm -f +REMOVEDIR = rm -rf +COPY = cp +WINSHELL = cmd + + +# Define Messages +# English +MSG_ERRORS_NONE = Errors: none +MSG_BEGIN = -------- begin -------- +MSG_END = -------- end -------- +MSG_SIZE_BEFORE = Size before: +MSG_SIZE_AFTER = Size after: +MSG_COFF = Converting to AVR COFF: +MSG_EXTENDED_COFF = Converting to AVR Extended COFF: +MSG_FLASH = Creating load file for Flash: +MSG_EEPROM = Creating load file for EEPROM: +MSG_EXTENDED_LISTING = Creating Extended Listing: +MSG_SYMBOL_TABLE = Creating Symbol Table: +MSG_LINKING = Linking: +MSG_COMPILING = Compiling C: +MSG_COMPILING_CPP = Compiling C++: +MSG_ASSEMBLING = Assembling: +MSG_CLEANING = Cleaning project: +MSG_CREATING_LIBRARY = Creating library: + + + + +# Define all object files. +OBJ = $(patsubst %.c,$(OBJDIR)/%.o,$(patsubst %.cpp,$(OBJDIR)/%.o,$(patsubst %.S,$(OBJDIR)/%.o,$(SRC)))) + +# Define all listing files. +LST = $(patsubst %.c,$(OBJDIR)/%.lst,$(patsubst %.cpp,$(OBJDIR)/%.lst,$(patsubst %.S,$(OBJDIR)/%.lst,$(SRC)))) + + +# Compiler flags to generate dependency files. +GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d + + +# Combine all necessary flags and optional flags. +# Add target processor to flags. +ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) +ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS) +ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) + + + + + +# Default target. +all: begin gccversion sizebefore build sizeafter end + +# Change the build target to build a HEX file or a library. +build: elf hex eep lss sym +#build: lib + + +elf: $(TARGET).elf +hex: $(TARGET).hex +eep: $(TARGET).eep +lss: $(TARGET).lss +sym: $(TARGET).sym +LIBNAME=lib$(TARGET).a +lib: $(LIBNAME) + + + +# Eye candy. +# AVR Studio 3.x does not check make's exit code but relies on +# the following magic strings to be generated by the compile job. +begin: + @echo + @echo $(MSG_BEGIN) + +end: + @echo $(MSG_END) + @echo + + +# Display size of file. +HEXSIZE = $(SIZE) --target=$(FORMAT) $(TARGET).hex +#ELFSIZE = $(SIZE) --mcu=$(MCU) --format=avr $(TARGET).elf +ELFSIZE = $(SIZE) $(TARGET).elf + +sizebefore: + @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_BEFORE); $(ELFSIZE); \ + 2>/dev/null; echo; fi + +sizeafter: + @if test -f $(TARGET).elf; then echo; echo $(MSG_SIZE_AFTER); $(ELFSIZE); \ + 2>/dev/null; echo; fi + + + +# Display compiler version information. +gccversion : + @$(CC) --version + + + +# Program the device. +program: $(TARGET).hex $(TARGET).eep + $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM) + + +# Generate avr-gdb config/init file which does the following: +# define the reset signal, load the target file, connect to target, and set +# a breakpoint at main(). +gdb-config: + @$(REMOVE) $(GDBINIT_FILE) + @echo define reset >> $(GDBINIT_FILE) + @echo SIGNAL SIGHUP >> $(GDBINIT_FILE) + @echo end >> $(GDBINIT_FILE) + @echo file $(TARGET).elf >> $(GDBINIT_FILE) + @echo target remote $(DEBUG_HOST):$(DEBUG_PORT) >> $(GDBINIT_FILE) +ifeq ($(DEBUG_BACKEND),simulavr) + @echo load >> $(GDBINIT_FILE) +endif + @echo break main >> $(GDBINIT_FILE) + +debug: gdb-config $(TARGET).elf +ifeq ($(DEBUG_BACKEND), avarice) + @echo Starting AVaRICE - Press enter when "waiting to connect" message displays. + @$(WINSHELL) /c start avarice --jtag $(JTAG_DEV) --erase --program --file \ + $(TARGET).elf $(DEBUG_HOST):$(DEBUG_PORT) + @$(WINSHELL) /c pause + +else + @$(WINSHELL) /c start simulavr --gdbserver --device $(MCU) --clock-freq \ + $(DEBUG_MFREQ) --port $(DEBUG_PORT) +endif + @$(WINSHELL) /c start avr-$(DEBUG_UI) --command=$(GDBINIT_FILE) + + + + +# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB. +COFFCONVERT = $(OBJCOPY) --debugging +COFFCONVERT += --change-section-address .data-0x800000 +COFFCONVERT += --change-section-address .bss-0x800000 +COFFCONVERT += --change-section-address .noinit-0x800000 +COFFCONVERT += --change-section-address .eeprom-0x810000 + + + +coff: $(TARGET).elf + @echo + @echo $(MSG_COFF) $(TARGET).cof + $(COFFCONVERT) -O coff-avr $< $(TARGET).cof + + +extcoff: $(TARGET).elf + @echo + @echo $(MSG_EXTENDED_COFF) $(TARGET).cof + $(COFFCONVERT) -O coff-ext-avr $< $(TARGET).cof + + + +# Create final output files (.hex, .eep) from ELF output file. +%.hex: %.elf + @echo + @echo $(MSG_FLASH) $@ + $(OBJCOPY) -O $(FORMAT) -R .eeprom -R .fuse -R .lock -R .signature $< $@ + +%.eep: %.elf + @echo + @echo $(MSG_EEPROM) $@ + -$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \ + --change-section-lma .eeprom=0 --no-change-warnings -O $(FORMAT) $< $@ || exit 0 + +# Create extended listing file from ELF output file. +%.lss: %.elf + @echo + @echo $(MSG_EXTENDED_LISTING) $@ + $(OBJDUMP) -h -S -z $< > $@ + +# Create a symbol table from ELF output file. +%.sym: %.elf + @echo + @echo $(MSG_SYMBOL_TABLE) $@ + $(NM) -n $< > $@ + + + +# Create library from object files. +.SECONDARY : $(TARGET).a +.PRECIOUS : $(OBJ) +%.a: $(OBJ) + @echo + @echo $(MSG_CREATING_LIBRARY) $@ + $(AR) $@ $(OBJ) + + +# Link: create ELF output file from object files. +.SECONDARY : $(TARGET).elf +.PRECIOUS : $(OBJ) +%.elf: $(OBJ) + @echo + @echo $(MSG_LINKING) $@ + $(CC) $(ALL_CFLAGS) $^ --output $@ $(LDFLAGS) + + +# Compile: create object files from C source files. +$(OBJDIR)/%.o : %.c + @echo + @echo $(MSG_COMPILING) $< + $(CC) -c $(ALL_CFLAGS) $< -o $@ + + +# Compile: create object files from C++ source files. +$(OBJDIR)/%.o : %.cpp + @echo + @echo $(MSG_COMPILING_CPP) $< + $(CC) -c $(ALL_CPPFLAGS) $< -o $@ + + +# Compile: create assembler files from C source files. +%.s : %.c + $(CC) -S $(ALL_CFLAGS) $< -o $@ + + +# Compile: create assembler files from C++ source files. +%.s : %.cpp + $(CC) -S $(ALL_CPPFLAGS) $< -o $@ + + +# Assemble: create object files from assembler source files. +$(OBJDIR)/%.o : %.S + @echo + @echo $(MSG_ASSEMBLING) $< + $(CC) -c $(ALL_ASFLAGS) $< -o $@ + + +# Create preprocessed source for use in sending a bug report. +%.i : %.c + $(CC) -E -mmcu=$(MCU) -I. $(CFLAGS) $< -o $@ + + +# Target: clean project. +clean: begin clean_list end + +clean_list : + @echo + $(REMOVE) $(TARGET).hex + $(REMOVE) $(TARGET).eep + $(REMOVE) $(TARGET).cof + $(REMOVE) $(TARGET).elf + $(REMOVE) $(TARGET).map + $(REMOVE) $(TARGET).sym + $(REMOVE) $(TARGET).lss + $(REMOVE) $(OBJ) + $(REMOVE) $(LST) + $(REMOVE) $(OBJ:.o=.s) + $(REMOVE) $(OBJ:.o=.i) + $(REMOVEDIR) .dep + + +# Create object files directory +$(shell mkdir $(OBJDIR) 2>/dev/null) + + +# Include the dependency files. +-include $(shell mkdir .dep 2>/dev/null) $(wildcard .dep/*) + + +# Listing of phony targets. +.PHONY : all begin finish end sizebefore sizeafter gccversion \ +build elf hex eep lss sym coff extcoff \ +clean clean_list program debug gdb-config diff --git a/print.c b/print.c index 59b4bca18..d9152971b 100644 --- a/print.c +++ b/print.c @@ -21,11 +21,10 @@ * THE SOFTWARE. */ -// Version 1.0: Initial Release - #include #include #include "print.h" +#include "sendchar.h" bool print_enable = false; @@ -38,15 +37,15 @@ void print_P(const char *s) while (1) { c = pgm_read_byte(s++); if (!c) break; - if (c == '\n') usb_debug_putchar('\r'); - usb_debug_putchar(c); + if (c == '\n') sendchar('\r'); + sendchar(c); } } void phex1(unsigned char c) { if (!print_enable) return; - usb_debug_putchar(c + ((c < 10) ? '0' : 'A' - 10)); + sendchar(c + ((c < 10) ? '0' : 'A' - 10)); } void phex(unsigned char c) @@ -68,7 +67,7 @@ void pbin(unsigned char c) { if (!print_enable) return; for (int i = 7; i >= 0; i--) { - usb_debug_putchar((c & (1< #include -#include "usb_debug.h" -bool print_enable; +extern bool print_enable; // this macro allows you to write print("some text") and // the string is automatically placed into flash memory :) #define print(s) print_P(PSTR(s)) -#define pchar(c) usb_debug_putchar(c) void print_P(const char *s); void phex(unsigned char c); diff --git a/ps2_vusb/Makefile b/ps2_vusb/Makefile new file mode 100644 index 000000000..48748a749 --- /dev/null +++ b/ps2_vusb/Makefile @@ -0,0 +1,50 @@ +# Target file name (without extension). +TARGET = ps2_vusb + +# Directory common source filess exist +COMMON_DIR = .. + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# keyboard dependent files +TARGET_SRC = main.c \ + keyboard_vusb.c \ + layer.c \ + keymap.c \ + matrix.c \ + ps2.c \ + print.c \ + util.c \ + timer.c \ + usart_print.c + +OPT_DEFS = -DDEBUG_LEVEL=0 + + +# MCU name, you MUST set this to match the board you are using +# type "make clean" after changing this, so all files will be rebuilt +#MCU = at90usb162 # Teensy 1.0 +#MCU = atmega32u4 # Teensy 2.0 +#MCU = at90usb646 # Teensy++ 1.0 +#MCU = at90usb1286 # Teensy++ 2.0 +MCU = atmega168 + + +# Processor frequency. +# Normally the first thing your program should do is set the clock prescaler, +# so your program will run at the correct speed. You should also set this +# variable to same clock speed. The _delay_ms() macro uses this, and many +# examples use this variable to calculate timings. Do not add a "UL" here. +F_CPU = 16000000 + + +# Build Options +# comment out to disable the options. +# +#MOUSEKEY_ENABLE = yes # Mouse keys +#USB_EXTRA_ENABLE = yes # Enhanced feature for Windows(Audio control and System control) +#USB_NKRO_ENABLE = yes # USB Nkey Rollover + + +include $(COMMON_DIR)/Makefile.vusb diff --git a/ps2_vusb/Makefile.orig b/ps2_vusb/Makefile.orig new file mode 100644 index 000000000..2bd1ed584 --- /dev/null +++ b/ps2_vusb/Makefile.orig @@ -0,0 +1,165 @@ +# Name: Makefile +# Project: hid-mouse example +# Author: Christian Starkjohann +# Creation Date: 2008-04-07 +# Tabsize: 4 +# Copyright: (c) 2008 by OBJECTIVE DEVELOPMENT Software GmbH +# License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) +# This Revision: $Id: Makefile 692 2008-11-07 15:07:40Z cs $ + +DEVICE = atmega168 +F_CPU = 16000000 # in Hz +FUSE_L = # see below for fuse values for particular devices +FUSE_H = +#AVRDUDE = avrdude -c usbasp -p $(DEVICE) # edit this line for your programmer +AVRDUDE = avrdude -P COM1 -b 19200 -c arduino -p $(DEVICE) + +CFLAGS = -Iusbdrv -I. -DDEBUG_LEVEL=1 +OBJECTS = usbdrv/usbdrv.o usbdrv/usbdrvasm.o usbdrv/oddebug.o main.o + +COMPILE = avr-gcc -Wall -Os -DF_CPU=$(F_CPU) $(CFLAGS) -mmcu=$(DEVICE) + +############################################################################## +# Fuse values for particular devices +############################################################################## +# If your device is not listed here, go to +# http://palmavr.sourceforge.net/cgi-bin/fc.cgi +# and choose options for external crystal clock and no clock divider +# +################################## ATMega8 ################################## +# ATMega8 FUSE_L (Fuse low byte): +# 0x9f = 1 0 0 1 1 1 1 1 +# ^ ^ \ / \--+--/ +# | | | +------- CKSEL 3..0 (external >8M crystal) +# | | +--------------- SUT 1..0 (crystal osc, BOD enabled) +# | +------------------ BODEN (BrownOut Detector enabled) +# +-------------------- BODLEVEL (2.7V) +# ATMega8 FUSE_H (Fuse high byte): +# 0xc9 = 1 1 0 0 1 0 0 1 <-- BOOTRST (boot reset vector at 0x0000) +# ^ ^ ^ ^ ^ ^ ^------ BOOTSZ0 +# | | | | | +-------- BOOTSZ1 +# | | | | + --------- EESAVE (don't preserve EEPROM over chip erase) +# | | | +-------------- CKOPT (full output swing) +# | | +---------------- SPIEN (allow serial programming) +# | +------------------ WDTON (WDT not always on) +# +-------------------- RSTDISBL (reset pin is enabled) +# +############################## ATMega48/88/168 ############################## +# ATMega*8 FUSE_L (Fuse low byte): +# 0xdf = 1 1 0 1 1 1 1 1 +# ^ ^ \ / \--+--/ +# | | | +------- CKSEL 3..0 (external >8M crystal) +# | | +--------------- SUT 1..0 (crystal osc, BOD enabled) +# | +------------------ CKOUT (if 0: Clock output enabled) +# +-------------------- CKDIV8 (if 0: divide by 8) +# ATMega*8 FUSE_H (Fuse high byte): +# 0xde = 1 1 0 1 1 1 1 0 +# ^ ^ ^ ^ ^ \-+-/ +# | | | | | +------ BODLEVEL 0..2 (110 = 1.8 V) +# | | | | + --------- EESAVE (preserve EEPROM over chip erase) +# | | | +-------------- WDTON (if 0: watchdog always on) +# | | +---------------- SPIEN (allow serial programming) +# | +------------------ DWEN (debug wire enable) +# +-------------------- RSTDISBL (reset pin is enabled) +# +############################## ATTiny25/45/85 ############################### +# ATMega*5 FUSE_L (Fuse low byte): +# 0xef = 1 1 1 0 1 1 1 1 +# ^ ^ \+/ \--+--/ +# | | | +------- CKSEL 3..0 (clock selection -> crystal @ 12 MHz) +# | | +--------------- SUT 1..0 (BOD enabled, fast rising power) +# | +------------------ CKOUT (clock output on CKOUT pin -> disabled) +# +-------------------- CKDIV8 (divide clock by 8 -> don't divide) +# ATMega*5 FUSE_H (Fuse high byte): +# 0xdd = 1 1 0 1 1 1 0 1 +# ^ ^ ^ ^ ^ \-+-/ +# | | | | | +------ BODLEVEL 2..0 (brownout trigger level -> 2.7V) +# | | | | +---------- EESAVE (preserve EEPROM on Chip Erase -> not preserved) +# | | | +-------------- WDTON (watchdog timer always on -> disable) +# | | +---------------- SPIEN (enable serial programming -> enabled) +# | +------------------ DWEN (debug wire enable) +# +-------------------- RSTDISBL (disable external reset -> enabled) +# +################################ ATTiny2313 ################################# +# ATTiny2313 FUSE_L (Fuse low byte): +# 0xef = 1 1 1 0 1 1 1 1 +# ^ ^ \+/ \--+--/ +# | | | +------- CKSEL 3..0 (clock selection -> crystal @ 12 MHz) +# | | +--------------- SUT 1..0 (BOD enabled, fast rising power) +# | +------------------ CKOUT (clock output on CKOUT pin -> disabled) +# +-------------------- CKDIV8 (divide clock by 8 -> don't divide) +# ATTiny2313 FUSE_H (Fuse high byte): +# 0xdb = 1 1 0 1 1 0 1 1 +# ^ ^ ^ ^ \-+-/ ^ +# | | | | | +---- RSTDISBL (disable external reset -> enabled) +# | | | | +-------- BODLEVEL 2..0 (brownout trigger level -> 2.7V) +# | | | +-------------- WDTON (watchdog timer always on -> disable) +# | | +---------------- SPIEN (enable serial programming -> enabled) +# | +------------------ EESAVE (preserve EEPROM on Chip Erase -> not preserved) +# +-------------------- DWEN (debug wire enable) + + +# symbolic targets: +help: + @echo "This Makefile has no default rule. Use one of the following:" + @echo "make hex ....... to build main.hex" + @echo "make program ... to flash fuses and firmware" + @echo "make fuse ...... to flash the fuses" + @echo "make flash ..... to flash the firmware (use this on metaboard)" + @echo "make clean ..... to delete objects and hex file" + +hex: main.hex + +program: flash fuse + +# rule for programming fuse bits: +fuse: + @[ "$(FUSE_H)" != "" -a "$(FUSE_L)" != "" ] || \ + { echo "*** Edit Makefile and choose values for FUSE_L and FUSE_H!"; exit 1; } + $(AVRDUDE) -U hfuse:w:$(FUSE_H):m -U lfuse:w:$(FUSE_L):m + +# rule for uploading firmware: +flash: main.hex + $(AVRDUDE) -U flash:w:main.hex:i + +# rule for deleting dependent files (those which can be built by Make): +clean: + rm -f main.hex main.lst main.obj main.cof main.list main.map main.eep.hex main.elf *.o usbdrv/*.o main.s usbdrv/oddebug.s usbdrv/usbdrv.s + +# Generic rule for compiling C files: +.c.o: + $(COMPILE) -c $< -o $@ + +# Generic rule for assembling Assembler source files: +.S.o: + $(COMPILE) -x assembler-with-cpp -c $< -o $@ +# "-x assembler-with-cpp" should not be necessary since this is the default +# file type for the .S (with capital S) extension. However, upper case +# characters are not always preserved on Windows. To ensure WinAVR +# compatibility define the file type manually. + +# Generic rule for compiling C to assembler, used for debugging only. +.c.s: + $(COMPILE) -S $< -o $@ + +# file targets: + +# Since we don't want to ship the driver multipe times, we copy it into this project: +usbdrv: + cp -r ../usbdrv . + +main.elf: usbdrv $(OBJECTS) # usbdrv dependency only needed because we copy it + $(COMPILE) -o main.elf $(OBJECTS) + +main.hex: main.elf + rm -f main.hex main.eep.hex + avr-objcopy -j .text -j .data -O ihex main.elf main.hex + avr-size main.hex + +# debugging targets: + +disasm: main.elf + avr-objdump -d main.elf + +cpp: + $(COMPILE) -E main.c diff --git a/ps2_vusb/config.h b/ps2_vusb/config.h new file mode 100644 index 000000000..1d2a28307 --- /dev/null +++ b/ps2_vusb/config.h @@ -0,0 +1,36 @@ +#ifndef CONFIG_H +#define CONFIG_H + + +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x6512 +#define MANUFACTURER t.m.k. +#define PRODUCT PS/2 keyboard converter +#define DESCRIPTION convert PS/2 keyboard to USB + +/* matrix size */ +#define MATRIX_ROWS 32 // keycode bit: 3-0 +#define MATRIX_COLS 8 // keycode bit: 6-4 +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* USB NKey Rollover */ +#ifdef USB_NKRO_ENABLE +#endif + +/* mouse keys */ +#ifdef MOUSEKEY_ENABLE +# define MOUSEKEY_DELAY_TIME 255 +#endif + +/* PS/2 mouse */ +#define PS2_CLOCK_PORT PORTD +#define PS2_CLOCK_PIN PIND +#define PS2_CLOCK_DDR DDRD +#define PS2_CLOCK_BIT 6 +#define PS2_DATA_PORT PORTD +#define PS2_DATA_PIN PIND +#define PS2_DATA_DDR DDRD +#define PS2_DATA_BIT 7 + +#endif diff --git a/ps2_vusb/keyboard.h b/ps2_vusb/keyboard.h new file mode 100644 index 000000000..87c61139b --- /dev/null +++ b/ps2_vusb/keyboard.h @@ -0,0 +1,27 @@ +#ifndef KEYBOARD_H +#define KEYBOARD_H + +#include "stdbool.h" + + +#define REPORT_KEYS 6 +typedef struct{ + uint8_t mods; + uint8_t rserved; // not used + uint8_t keys[REPORT_KEYS]; +}report_t; + + +//extern report_t *report; +//extern report_t *report_prev; + +report_t *report_get(void); +bool report_has_key(void); +void report_send(void); +void report_add_mod(uint8_t mod); +void report_add_key(uint8_t key); +void report_add_code(uint8_t code); +void report_swap(void); +void report_clear(void); + +#endif diff --git a/ps2_vusb/keyboard_vusb.c b/ps2_vusb/keyboard_vusb.c new file mode 100644 index 000000000..6ea195759 --- /dev/null +++ b/ps2_vusb/keyboard_vusb.c @@ -0,0 +1,156 @@ +#include "usbdrv.h" +#include "usb_keycodes.h" +#include "keyboard.h" +#include "print.h" + +static report_t report0; +static report_t report1; +static report_t *report = &report0; +static report_t *report_prev = &report1; + +void report_send(void) +{ + if (usbInterruptIsReady()){ + usbSetInterrupt((void *)report, sizeof(*report)); + } +} + +report_t *report_get(void) +{ + return report; +} + +uint8_t report_mods(void) +{ + return report->mods; +} + +uint8_t *report_keys(void) +{ + return report->keys; +} + +bool report_has_key(void) +{ + for (int i = 0; i < REPORT_KEYS; i++) { + if (report->keys[i]) + return true; + } + return false; +} + +void report_add_mod(uint8_t mod) +{ + report->mods |= mod; +} + +void report_add_key(uint8_t code) +{ + int8_t i = 0; + int8_t empty = -1; + for (; i < REPORT_KEYS; i++) { + if (report_prev->keys[i] == code) { + report->keys[i] = code; + break; + } + if (empty == -1 && report_prev->keys[i] == KB_NO && report->keys[i] == KB_NO) { + empty = i; + } + } + if (i == REPORT_KEYS && empty != -1) { + report->keys[empty] = code; + } +} + +void report_add_code(uint8_t code) +{ + if (IS_MOD(code)) { + report_add_mod(code); + } else { + report_add_key(code); + } +} + +void report_swap(void) +{ + report_t *tmp = report_prev; + report_prev = report; + report = tmp; +} + +void report_clear(void) +{ + report->mods = 0; + for (int8_t i = 0; i < REPORT_KEYS; i++) { + report->keys[i] = 0; + } +} + + +static uchar idleRate; /* repeat rate for keyboards, never used for mice */ +usbMsgLen_t usbFunctionSetup(uchar data[8]) +{ +usbRequest_t *rq = (void *)data; + + print("Setup: "); + if((rq->bmRequestType & USBRQ_TYPE_MASK) == USBRQ_TYPE_CLASS){ /* class request type */ + print("CLASS: "); + phex(rq->bRequest); + if(rq->bRequest == USBRQ_HID_GET_REPORT){ + print("GET_REPORT"); + /* we only have one report type, so don't look at wValue */ + usbMsgPtr = (void *)report; + return sizeof(*report); + }else if(rq->bRequest == USBRQ_HID_GET_IDLE){ + print("GET_IDLE: "); + phex(idleRate); + usbMsgPtr = &idleRate; + return 1; + }else if(rq->bRequest == USBRQ_HID_SET_IDLE){ + idleRate = rq->wValue.bytes[1]; + print("SET_IDLE: "); + phex(idleRate); + } + print("\n"); + }else{ + print("VENDOR\n"); + /* no vendor specific requests implemented */ + } + return 0; /* default for not implemented requests: return no data back to host */ +} + + +PROGMEM char usbHidReportDescriptor[USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH] = { + 0x05, 0x01, // Usage Page (Generic Desktop), + 0x09, 0x06, // Usage (Keyboard), + 0xA1, 0x01, // Collection (Application), + 0x75, 0x01, // Report Size (1), + 0x95, 0x08, // Report Count (8), + 0x05, 0x07, // Usage Page (Key Codes), + 0x19, 0xE0, // Usage Minimum (224), + 0x29, 0xE7, // Usage Maximum (231), + 0x15, 0x00, // Logical Minimum (0), + 0x25, 0x01, // Logical Maximum (1), + 0x81, 0x02, // Input (Data, Variable, Absolute), ;Modifier byte + 0x95, 0x01, // Report Count (1), + 0x75, 0x08, // Report Size (8), + 0x81, 0x03, // Input (Constant), ;Reserved byte + 0x95, 0x05, // Report Count (5), + 0x75, 0x01, // Report Size (1), + 0x05, 0x08, // Usage Page (LEDs), + 0x19, 0x01, // Usage Minimum (1), + 0x29, 0x05, // Usage Maximum (5), + 0x91, 0x02, // Output (Data, Variable, Absolute), ;LED report + 0x95, 0x01, // Report Count (1), + 0x75, 0x03, // Report Size (3), + 0x91, 0x03, // Output (Constant), ;LED report padding + 0x95, 0x06, // Report Count (6), + 0x75, 0x08, // Report Size (8), + 0x15, 0x00, // Logical Minimum (0), + 0x25, 0xFF, // Logical Maximum(255), + 0x05, 0x07, // Usage Page (Key Codes), + 0x19, 0x00, // Usage Minimum (0), + 0x29, 0xFF, // Usage Maximum (255), + 0x81, 0x00, // Input (Data, Array), + 0xc0 // End Collection +}; diff --git a/ps2_vusb/keymap.c b/ps2_vusb/keymap.c new file mode 100644 index 000000000..47db18bfa --- /dev/null +++ b/ps2_vusb/keymap.c @@ -0,0 +1,189 @@ +/* + * Keymap for PS/2 keyboard + */ +#include +#include +#include +#include "usb_keyboard.h" +#include "usb_keycodes.h" +#include "print.h" +#include "debug.h" +#include "util.h" +#include "keymap_skel.h" + + +#define KEYCODE(layer, row, col) (pgm_read_byte(&keymaps[(layer)][(row)][(col)])) + +// Convert physical keyboard layout to matrix array. +// This is a macro to define keymap easily in keyboard layout form. +#define KEYMAP( \ + K76, K05,K06,K04,K0C, K03,K0B,K83,K0A, K01,K09,K78,K07, KFC,K7E,KFE, KB7,KBF,KDE, \ + K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD, K77,KCA,K7C,K7B, \ + K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA, K6C,K75,K7D, \ + K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52, K5A, K6B,K73,K74,K79, \ + K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A, K59, KF5, K69,K72,K7A, \ + K14,K9F,K11, K29, K91,KA7,KAF,K94, KEB,KF2,KF4, K70, K71,KDA \ +) { \ + { KB_NO, KB_##K01, KB_NO, KB_##K03, KB_##K04, KB_##K05, KB_##K06, KB_##K07 }, \ + { KB_NO, KB_##K09, KB_##K0A, KB_##K0B, KB_##K0C, KB_##K0D, KB_##K0E, KB_NO }, \ + { KB_NO, KB_##K11, KB_##K12, KB_NO, KB_##K14, KB_##K15, KB_##K16, KB_NO }, \ + { KB_NO, KB_NO, KB_##K1A, KB_##K1B, KB_##K1C, KB_##K1D, KB_##K1E, KB_NO }, \ + { KB_NO, KB_##K21, KB_##K22, KB_##K23, KB_##K24, KB_##K25, KB_##K26, KB_NO }, \ + { KB_NO, KB_##K29, KB_##K2A, KB_##K2B, KB_##K2C, KB_##K2D, KB_##K2E, KB_NO }, \ + { KB_NO, KB_##K31, KB_##K32, KB_##K33, KB_##K34, KB_##K35, KB_##K36, KB_NO }, \ + { KB_NO, KB_NO, KB_##K3A, KB_##K3B, KB_##K3C, KB_##K3D, KB_##K3E, KB_NO }, \ + { KB_NO, KB_##K41, KB_##K42, KB_##K43, KB_##K44, KB_##K45, KB_##K46, KB_NO }, \ + { KB_NO, KB_##K49, KB_##K4A, KB_##K4B, KB_##K4C, KB_##K4D, KB_##K4E, KB_NO }, \ + { KB_NO, KB_NO, KB_##K52, KB_NO, KB_##K54, KB_##K55, KB_NO, KB_NO }, \ + { KB_##K58, KB_##K59, KB_##K5A, KB_##K5B, KB_NO, KB_##K5D, KB_NO, KB_NO }, \ + { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_##K66, KB_NO }, \ + { KB_NO, KB_##K69, KB_NO, KB_##K6B, KB_##K6C, KB_NO, KB_NO, KB_NO }, \ + { KB_##K70, KB_##K71, KB_##K72, KB_##K73, KB_##K74, KB_##K75, KB_##K76, KB_##K77 }, \ + { KB_##K78, KB_##K79, KB_##K7A, KB_##K7B, KB_##K7C, KB_##K7D, KB_##K7E, KB_NO }, \ + { KB_NO, KB_NO, KB_NO, KB_##K83, KB_NO, KB_NO, KB_NO, KB_NO }, \ + { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, \ + { KB_NO, KB_##K91, KB_NO, KB_NO, KB_##K94, KB_NO, KB_NO, KB_NO }, \ + { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_##K9F }, \ + { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_##KA7 }, \ + { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_##KAF }, \ + { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_##KB7 }, \ + { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_##KBF }, \ + { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, \ + { KB_NO, KB_NO, KB_##KCA, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, \ + { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, \ + { KB_NO, KB_NO, KB_##KDA, KB_NO, KB_NO, KB_NO, KB_##KDE, KB_NO }, \ + { KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, \ + { KB_NO, KB_##KE9, KB_NO, KB_##KEB, KB_##KEC, KB_NO, KB_NO, KB_NO }, \ + { KB_##KF0, KB_##KF1, KB_##KF2, KB_NO, KB_##KF4, KB_##KF5, KB_NO, KB_NO }, \ + { KB_NO, KB_NO, KB_##KFA, KB_NO, KB_##KFC, KB_##KFD, KB_##KFE, KB_NO }, \ +} + + +// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed. +static const uint8_t PROGMEM fn_layer[] = { + 5, // Fn0 + 6, // Fn1 + 5, // Fn2 + 0, // Fn3 + 0, // Fn4 + 0, // Fn5 + 0, // Fn6 + 0 // Fn7 +}; + +// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer. +// See layer.c for details. +static const uint8_t PROGMEM fn_keycode[] = { + KB_SCLN, // Fn0 + KB_SLSH, // Fn1 + KB_A, // Fn2 + KB_NO, // Fn3 + KB_NO, // Fn4 + KB_NO, // Fn5 + KB_NO, // Fn6 + KB_NO // Fn7 +}; + +static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + /* keymap + * ,---. ,---------------. ,---------------. ,---------------. ,-----------. ,-----------. + * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau| |Pwr|Slp|Wak| + * `---' `---------------' `---------------' `---------------' `-----------' `-----------' + * ,-----------------------------------------------------------. ,-----------. ,---------------. + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backspa| |Ins|Hom|PgU| |NmL| /| *| -| + * |-----------------------------------------------------------| |-----------| |---------------| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD| | 7| 8| 9| | + * |-----------------------------------------------------------| `-----------' |-----------| +| + * |CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return | | 4| 5| 6| | + * |-----------------------------------------------------------| ,---. |---------------| + * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | |Up | | 1| 2| 3| | + * |-----------------------------------------------------------| ,-----------. |-----------|Ent| + * |Ctrl |Gui |Alt | Space |Alt |Gui |Menu|Ctrl| |Lef|Dow|Rig| | 0| .| | + * `-----------------------------------------------------------' `-----------' `---------------' + */ + /* 0: default */ + KEYMAP( + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, PWR, F13, F14, + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9, + CAPS,FN2, S, D, F, G, H, J, K, L, FN0, QUOT, ENT, P4, P5, P6, PPLS, + LSFT,Z, X, C, V, B, N, M, COMM,DOT, FN1, RSFT, UP, P1, P2, P3, + LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT + ), + /* 1: plain Qwerty without layer switching */ + KEYMAP( + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, PWR, F13, F14, + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9, + CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS, + LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3, + LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT + ), + /* 2: Colemak http://colemak.com */ + KEYMAP( + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, PWR, F13, F14, + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, + TAB, Q, W, F, P, G, J, L, U, Y, SCLN,LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9, + BSPC,A, R, S, T, D, H, N, E, I, O, QUOT, ENT, P4, P5, P6, PPLS, + LSFT,Z, X, C, V, B, K, M, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3, + LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT + ), + /* 3: Dvorak http://en.wikipedia.org/wiki/Dvorak_Simplified_Keyboard */ + KEYMAP( + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, PWR, F13, F14, + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, LBRC,RBRC,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, + TAB, QUOT,COMM,DOT, P, Y, F, G, C, R, L, SLSH,EQL, BSLS, DEL, END, PGDN, P7, P8, P9, + CAPS,A, O, E, U, I, D, H, T, N, S, MINS, ENT, P4, P5, P6, PPLS, + LSFT,SCLN,Q, J, K, X, B, M, W, V, Z, RSFT, UP, P1, P2, P3, + LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT + ), + /* 4: Workman http://viralintrospection.wordpress.com/2010/09/06/a-different-philosophy-in-designing-keyboard-layouts/ */ + KEYMAP( + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, PWR, F13, F14, + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, + TAB, Q, D, R, W, B, J, F, U, P, SCLN,LBRC,RBRC,BSLS, DEL, END, PGDN, P7, P8, P9, + BSPC,A, S, H, T, G, Y, N, E, O, I, QUOT, ENT, P4, P5, P6, PPLS, + LSFT,Z, X, M, C, V, K, L, COMM,DOT, SLSH, RSFT, UP, P1, P2, P3, + LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT + ), + /* 5: Mouse keys */ + KEYMAP( + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, PWR, F13, F14, + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F8, F10, F11, F12, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, + TAB, WH_L,WH_D,MS_U,WH_U,WH_R,WH_L,WH_D,WH_U,WH_R,NO, NO, NO, BSLS, DEL, END, PGDN, P7, P8, P9, + CAPS,FN2, MS_L,MS_D,MS_R,NO, MS_L,MS_D,MS_U,MS_R,FN0, NO, ENT, P4, P5, P6, PPLS, + LSFT,VOLD,VOLU,MUTE,BTN2,BTN3,BTN2,BTN1,VOLD,VOLU,MUTE, RSFT, UP, P1, P2, P3, + LCTL,LGUI,LALT, BTN1, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT + ), + /* 6: Cursor keys */ + KEYMAP( + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,BRK, PWR, F13, F14, + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F8, F10, F11, F12, BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, + TAB, NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, NO, NO, NO, BSLS, DEL, END, PGDN, P7, P8, P9, + CAPS,NO, NO, NO, NO, NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT, P4, P5, P6, PPLS, + LSFT,VOLD,VOLU,MUTE,NO, NO, HOME,PGDN,PGUP,END, FN1, RSFT, UP, P1, P2, P3, + LCTL,LGUI,LALT, SPC, RALT,RGUI,APP, RCTL, LEFT,DOWN,RGHT, P0, PDOT,PENT + ), +}; + + +uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col) +{ + return KEYCODE(layer, row, col); +} + +uint8_t keymap_fn_layer(uint8_t fn_bits) +{ + return pgm_read_byte(&fn_layer[biton(fn_bits)]); +} + +uint8_t keymap_fn_keycode(uint8_t fn_bits) +{ + return pgm_read_byte(&fn_keycode[(biton(fn_bits))]); +} + +// define a condition to enter special function mode +bool keymap_is_special_mode(uint8_t fn_bits) +{ + return usb_keyboard_mods == (BIT_LSHIFT | BIT_RSHIFT) || usb_keyboard_mods == (BIT_LCTRL | BIT_RSHIFT); +} diff --git a/ps2_vusb/layer.c b/ps2_vusb/layer.c new file mode 100644 index 000000000..e4132bade --- /dev/null +++ b/ps2_vusb/layer.c @@ -0,0 +1,183 @@ +#include "keymap_skel.h" +#include "keyboard.h" +#include "debug.h" +#include "timer.h" +#include "layer.h" + +/* + * Parameters: + * ENTER_DELAY |=======| + * SEND_FN_TERM |================| + * + * Fn key processing cases: + * 1. release Fn after SEND_FN_TERM. + * Layer sw ___________|~~~~~~~~~~~|___ + * Fn press ___|~~~~~~~~~~~~~~~~~~~|___ + * Fn send ___________________________ + * + * 2. release Fn during SEND_FN_TERM.(not layer used) + * Layer sw ___________|~~~~~~|________ + * Fn press ___|~~~~~~~~~~~~~~|________ + * Fn key send __________________|~|______ + * other key press ___________________________ + * other key send ___________________________ + * + * 3. release Fn during SEND_FN_TERM.(layer used) + * Layer sw ___________|~~~~~~|________ + * Fn press ___|~~~~~~~~~~~~~~|________ + * Fn key send ___________________________ + * Fn send ___________________________ + * other key press _____________|~~|__________ + * other key send _____________|~~|__________ + * + * 4. press other key during ENTER_DELAY. + * Layer sw ___________________________ + * Fn key press ___|~~~~~~~~~|_____________ + * Fn key send ______|~~~~~~|_____________ + * other key press ______|~~~|________________ + * other key send _______|~~|________________ + * + * 5. press Fn while press other key. + * Layer sw ___________________________ + * Fn key press ___|~~~~~~~~~|_____________ + * Fn key send ___|~~~~~~~~~|_____________ + * other key press ~~~~~~~|___________________ + * other key send ~~~~~~~|___________________ + * + * 6. press Fn twice quickly and keep holding down.(repeat) + * Layer sw ___________________________ + * Fn key press ___|~|____|~~~~~~~~~~~~~~~~ + * Fn key send _____|~|__|~~~~~~~~~~~~~~~~ + */ + +// LAYER_ENTER_DELAY: prevent from moving new layer +#define LAYER_ENTER_DELAY 10 + +// LAYER_SEND_FN_TERM: send keycode if release key in this term +#define LAYER_SEND_FN_TERM 40 + + +uint8_t default_layer = 0; +uint8_t current_layer = 0; + +static bool layer_used = false; +static uint8_t new_layer(uint8_t fn_bits); + + +uint8_t layer_get_keycode(uint8_t row, uint8_t col) +{ + uint8_t code = keymap_get_keycode(current_layer, row, col); + // normal key or mouse key + if ((IS_KEY(code) || IS_MOUSEKEY(code))) { + layer_used = true; + } + return code; +} + +// bit substract b from a +#define BIT_SUBT(a, b) (a&(a^b)) +void layer_switching(uint8_t fn_bits) +{ + // layer switching + static uint8_t last_fn = 0; + static uint8_t last_mods = 0; + static uint16_t last_timer = 0; + static uint8_t sent_fn = 0; + + if (fn_bits == last_fn) { // Fn state is not changed + if (fn_bits == 0) { + // do nothing + } else { + if (timer_elapsed(last_timer) > LAYER_ENTER_DELAY) { + uint8_t _layer_to_switch = new_layer(BIT_SUBT(fn_bits, sent_fn)); + if (current_layer != _layer_to_switch) { // not switch layer yet + debug("Fn case: 1,2,3(LAYER_ENTER_DELAY passed)\n"); + debug("Switch Layer: "); debug_hex(current_layer); + current_layer = _layer_to_switch; + layer_used = false; + debug(" -> "); debug_hex(current_layer); debug("\n"); + } + } else { + if (report_has_key()) { // other keys is pressed + uint8_t _fn_to_send = BIT_SUBT(fn_bits, sent_fn); + if (_fn_to_send) { + debug("Fn case: 4(send Fn before other key pressed)\n"); + // send only Fn key first + report_swap(); + report_clear(); + report_add_code(keymap_fn_keycode(_fn_to_send)); // TODO: do all Fn keys + report_add_mod(last_mods); + report_send(); + report_swap(); + sent_fn |= _fn_to_send; + } + } + } + // add Fn keys to send + //report_add_code(keymap_fn_keycode(fn_bits&sent_fn)); // TODO: do all Fn keys + } + } else { // Fn state is changed(edge) + uint8_t fn_changed = 0; + + debug("fn_bits: "); debug_bin(fn_bits); debug("\n"); + debug("sent_fn: "); debug_bin(sent_fn); debug("\n"); + debug("last_fn: "); debug_bin(last_fn); debug("\n"); + debug("last_mods: "); debug_hex(last_mods); debug("\n"); + debug("last_timer: "); debug_hex16(last_timer); debug("\n"); + + // pressed Fn + if ((fn_changed = BIT_SUBT(fn_bits, last_fn))) { + debug("fn_changed: "); debug_bin(fn_changed); debug("\n"); + if (report_has_key()) { + debug("Fn case: 5(pressed Fn with other key)\n"); + sent_fn |= fn_changed; + } else if (fn_changed & sent_fn) { // pressed same Fn in a row + if (timer_elapsed(last_timer) > LAYER_ENTER_DELAY) { + debug("Fn case: 6(repate2)\n"); + // time passed: not repeate + sent_fn &= ~fn_changed; + } else { + debug("Fn case: 6(repate)\n"); + } + } + } + // released Fn + if ((fn_changed = BIT_SUBT(last_fn, fn_bits))) { + debug("fn_changed: "); debug_bin(fn_changed); debug("\n"); + if (timer_elapsed(last_timer) < LAYER_SEND_FN_TERM) { + //if (!layer_used && BIT_SUBT(fn_changed, sent_fn)) { // layer not used && Fn not sent + if (BIT_SUBT(fn_changed, sent_fn)) { // layer not used && Fn not sent + debug("Fn case: 2(send Fn one shot: released Fn during LAYER_SEND_FN_TERM)\n"); + // send only Fn key first + report_swap(); + report_clear(); + report_add_code(keymap_fn_keycode(fn_changed)); // TODO: do all Fn keys + report_add_mod(last_mods); + report_send(); + report_swap(); + sent_fn |= fn_changed; + } + } + debug("Switch Layer(released Fn): "); debug_hex(current_layer); + current_layer = new_layer(BIT_SUBT(fn_bits, sent_fn)); + layer_used = false; + debug(" -> "); debug_hex(current_layer); debug("\n"); + } + + last_fn = fn_bits; + last_mods = report_get()->mods; + last_timer = timer_read(); + } + // send Fn keys + for (uint8_t i = 0; i < 8; i++) { + if ((sent_fn & fn_bits) & (1< +#include +#include +#include /* for sei() */ +#include /* for _delay_ms() */ + +#include /* required by usbdrv.h */ +#include "usbdrv.h" +#include "usart_print.h" /* This is also an example for using debug macros */ +#include "ps2.h" +#include "usb_keycodes.h" +#include "matrix_skel.h" +#include "keymap_skel.h" +#include "layer.h" +#include "print.h" +#include "debug.h" +#include "sendchar.h" +#include "keyboard.h" +#include "timer.h" + +/* ------------------------------------------------------------------------- */ +/* ----------------------------- USB interface ----------------------------- */ +/* ------------------------------------------------------------------------- */ + + + + + + +int main(void) +{ +uchar i; + +print_enable = true; +debug_enable = true; +timer_init(); +matrix_init(); + + wdt_enable(WDTO_1S); + /* Even if you don't use the watchdog, turn it off here. On newer devices, + * the status of the watchdog (on/off, period) is PRESERVED OVER RESET! + */ + /* RESET status: all port bits are inputs without pull-up. + * That's the way we need D+ and D-. Therefore we don't need any + * additional hardware initialization. + */ + odDebugInit(); + DBG1(0x00, 0, 0); /* debug output: main starts */ + usbInit(); + usbDeviceDisconnect(); /* enforce re-enumeration, do this while interrupts are disabled! */ + i = 0; + while(--i){ /* fake USB disconnect for > 250 ms */ + wdt_reset(); + _delay_ms(1); + } + usbDeviceConnect(); + sei(); + + uint8_t fn_bits = 0; + while (1) { /* main event loop */ + DBG1(0x02, 0, 0); /* debug output: main loop iterates */ + wdt_reset(); + usbPoll(); + +/* +static uint8_t code = 0; +code = ps2_host_recv(); +if (code) { + odDebug(0x05, &code, 1); +} +*/ + matrix_scan(); + if (matrix_is_modified()) { + //matrix_print(); // too heavy on USART + fn_bits = 0; + report_swap(); + report_clear(); + for (int row = 0; row < matrix_rows(); row++) { + for (int col = 0; col < matrix_cols(); col++) { + if (!matrix_is_on(row, col)) continue; + + uint8_t code = layer_get_keycode(row, col); + if (code == KB_NO) { + // do nothing + } + else if (IS_MOD(code)) { + report_add_mod(MOD_BIT(code)); + } + else if (IS_KEY(code)) { + report_add_key(code); + } + else if (IS_FN(code)) { + fn_bits |= FN_BIT(code); + } + else { + debug("ignore keycode: "); debug_hex(code); debug("\n"); + } + } + } + } + layer_switching(fn_bits); + if (matrix_is_modified()) { + report_send(); + } + } +} diff --git a/ps2_vusb/matrix.c b/ps2_vusb/matrix.c new file mode 100644 index 000000000..c46473392 --- /dev/null +++ b/ps2_vusb/matrix.c @@ -0,0 +1,492 @@ +/* + * scan matrix + */ +#include +#include +#include +#include +#include "print.h" +#include "util.h" +#include "debug.h" +#include "ps2.h" +#include "usb_keyboard.h" +#include "matrix_skel.h" + + +#if (MATRIX_COLS > 16) +# error "MATRIX_COLS must not exceed 16" +#endif +#if (MATRIX_ROWS > 255) +# error "MATRIX_ROWS must not exceed 255" +#endif + + +/* + * Matrix usage: + * "PS/2 Scan Codes Set 2" is assigned to 256(32x8)cells matrix. + * Hmm, It is very sparse and not efficient :( + * + * 8bit + * --------- + * 0| | + * :| XX | 00-7F for normal codes(without E0-prefix) + * f|_________| + * 10| | + * :| E0 XX | 80-FF for E0-prefix codes(use (XX|0x80) as code) + * 1f| | + * --------- + * exceptions: + * 83: F8[0x83](normal codes but > 0x7F) + * FC: PrintScreen[E0 7C or 84] + * FE: Puause + */ +#define F8 (0x83) +#define PRINT_SCREEN (0xFC) +#define PAUSE (0xFE) +#define ROW(code) (code>>3) +#define COL(code) (code&0x07) + +static bool is_modified = false; + +// matrix state buffer(1:on, 0:off) +#if (MATRIX_COLS <= 8) +static uint8_t matrix[MATRIX_ROWS]; +#else +static uint16_t matrix[MATRIX_ROWS]; +#endif + +#ifdef MATRIX_HAS_GHOST +static bool matrix_has_ghost_in_row(uint8_t row); +#endif +static void matrix_make(uint8_t code); +static void matrix_break(uint8_t code); +static void ps2_reset(void); +static void ps2_set_leds(uint8_t leds); + + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + ps2_host_init(); + _delay_ms(1000); + + // flush LEDs +/* + ps2_set_leds(1< | + * LShift | E0 F0 12 | E0 12 + * RShift | E0 F0 59 | E0 59 + * L+RShift | E0 F0 12 E0 F0 59 | E0 59 E0 12 + * + * Num Lock: on + * modifiers | make | break + * ----------+---------------------------+---------------------- + * Other | E0 12 | E0 F0 12 + * Shift'd | | + * + * Handling: ignore these prefix/postfix codes + * + * + * Keypad-/: + * modifiers | make | break + * ----------+---------------------------+---------------------- + * Ohter | | + * LShift | E0 F0 12 | E0 12 + * RShift | E0 F0 59 | E0 59 + * L+RShift | E0 F0 12 E0 F0 59 | E0 59 E0 12 + * + * Handling: ignore these prefix/postfix codes + * + * + * PrintScreen: + * With hoding down modifiers, the scan code is sent as following: + * + * modifiers | make | break + * ----------+--------------+----------------------------------- + * Other | E0 12 E0 7C | E0 F0 7C E0 F0 12 + * Shift'd | E0 7C | E0 F0 7C + * Control'd | E0 7C | E0 F0 7C + * Alt'd | 84 | F0 84 + * + * Handling: ignore prefix/postfix codes and treat both scan code + * E0 7C and 84 as PrintScreen. + * + * Pause: + * With hoding down modifiers, the scan code is sent as following: + * + * modifiers | make(no break code) + * ----------+-------------------------------------------------- + * no mods | E1 14 77 E1 F0 14 F0 77 + * Control'd | E0 7E E0 F0 7E + * + * Handling: treat these two code sequence as Pause + * + */ +uint8_t matrix_scan(void) +{ + + static enum { + INIT, + F0, + E0, + E0_F0, + // states for Pause/Break + E1, + E1_14, + E1_14_77, + E1_14_77_E1, + E1_14_77_E1_F0, + E1_14_77_E1_F0_14, + E1_14_77_E1_F0_14_F0, + } state = INIT; + + + is_modified = false; + + // Pause/Break off(PS/2 has no break for this key) + if (matrix_is_on(ROW(PAUSE), COL(PAUSE))) { + matrix_break(PAUSE); + } + + uint8_t code; + while ((code = ps2_host_recv())) { +//debug_hex(code); debug(" "); + switch (state) { + case INIT: + switch (code) { + case 0xE0: // 2byte make + state = E0; + break; + case 0xF0: // break code + state = F0; + break; + case 0xE1: // Pause/Break + state = E1; + break; + case 0x83: // F8 + matrix_make(F8); + state = INIT; + break; + case 0x84: // PrintScreen + matrix_make(PRINT_SCREEN); + state = INIT; + break; + default: // normal key make + if (code < 0x80) { + matrix_make(code); + } else { + debug("unexpected scan code at INIT: "); debug_hex(code); debug("\n"); + } + state = INIT; + } + break; + case E0: + switch (code) { + case 0x12: // postfix/postfix code for exceptional keys + case 0x59: // postfix/postfix code for exceptional keys + // ignore + state = INIT; + break; + case 0x7E: // former part of Control-Pause[E0 7E E0 F0 7E] + matrix_make(PAUSE); + state = INIT; + break; + case 0xF0: // E0 break + state = E0_F0; + break; + default: // E0 make + if (code < 0x80) { + matrix_make(code|0x80); + } else { + debug("unexpected scan code at E0: "); debug_hex(code); debug("\n"); + } + state = INIT; + } + break; + case F0: + switch (code) { + case 0x83: + matrix_break(F8); + state = INIT; + break; + case 0x84: + matrix_break(PRINT_SCREEN); + state = INIT; + break; + default: + if (code < 0x80) { + matrix_break(code); + } else { + debug("unexpected scan code at F0: "); debug_hex(code); debug("\n"); + } + state = INIT; + } + break; + case E0_F0: // E0 break + switch (code) { + case 0x12: // postfix/postfix code for exceptional keys + case 0x59: // postfix/postfix code for exceptional keys + case 0x7E: // latter part of Control-Pause[E0 7E E0 F0 7E] + // ignore + state = INIT; + break; + default: + if (code < 0x80) { + matrix_break(code|0x80); + } else { + debug("unexpected scan code at E0_F0: "); debug_hex(code); debug("\n"); + } + state = INIT; + } + break; + /* Pause */ + case E1: + switch (code) { + case 0x14: + state = E1_14; + break; + default: + state = INIT; + } + break; + case E1_14: + switch (code) { + case 0x77: + state = E1_14_77; + break; + default: + state = INIT; + } + break; + case E1_14_77: + switch (code) { + case 0xE1: + state = E1_14_77_E1; + break; + default: + state = INIT; + } + break; + case E1_14_77_E1: + switch (code) { + case 0xF0: + state = E1_14_77_E1_F0; + break; + default: + state = INIT; + } + break; + case E1_14_77_E1_F0: + switch (code) { + case 0x14: + state = E1_14_77_E1_F0_14; + break; + default: + state = INIT; + } + break; + case E1_14_77_E1_F0_14: + switch (code) { + case 0xF0: + state = E1_14_77_E1_F0_14_F0; + break; + default: + state = INIT; + } + break; + case E1_14_77_E1_F0_14_F0: + switch (code) { + case 0x77: + matrix_make(PAUSE); + state = INIT; + break; + default: + state = INIT; + } + break; + default: + state = INIT; + } + } + + // handle LED indicators +/* + static uint8_t prev_leds = 0; + if (prev_leds != usb_keyboard_leds) { + uint8_t leds = 0; + if (usb_keyboard_leds&(1<= 10) + h += 'a' - (uchar)10 - '0'; + h += '0'; + return h; +} + +void printHex(uchar c) +{ + uartPutc(hexAscii(c >> 4)); + uartPutc(hexAscii(c)); +} + +void odDebug(uchar prefix, uchar *data, uchar len) +{ + printHex(prefix); + uartPutc(':'); + while(len--){ + uartPutc(' '); + printHex(*data++); + } + uartPutc('\r'); + uartPutc('\n'); +} diff --git a/ps2_vusb/usart_print.h b/ps2_vusb/usart_print.h new file mode 100644 index 000000000..e6e83a081 --- /dev/null +++ b/ps2_vusb/usart_print.h @@ -0,0 +1,121 @@ +/* Name: oddebug.h + * Project: AVR library + * Author: Christian Starkjohann + * Creation Date: 2005-01-16 + * Tabsize: 4 + * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH + * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) + * This Revision: $Id: oddebug.h 692 2008-11-07 15:07:40Z cs $ + */ + +#ifndef __oddebug_h_included__ +#define __oddebug_h_included__ + +/* +General Description: +This module implements a function for debug logs on the serial line of the +AVR microcontroller. Debugging can be configured with the define +'DEBUG_LEVEL'. If this macro is not defined or defined to 0, all debugging +calls are no-ops. If it is 1, DBG1 logs will appear, but not DBG2. If it is +2, DBG1 and DBG2 logs will be printed. + +A debug log consists of a label ('prefix') to indicate which debug log created +the output and a memory block to dump in hex ('data' and 'len'). +*/ + + +#ifndef F_CPU +# define F_CPU 12000000 /* 12 MHz */ +#endif + +/* make sure we have the UART defines: */ +#include "usbportability.h" + +#ifndef uchar +# define uchar unsigned char +#endif + +#if DEBUG_LEVEL > 0 && !(defined TXEN || defined TXEN0) /* no UART in device */ +# warning "Debugging disabled because device has no UART" +# undef DEBUG_LEVEL +#endif + +#ifndef DEBUG_LEVEL +# define DEBUG_LEVEL 0 +#endif + +/* ------------------------------------------------------------------------- */ + +#if DEBUG_LEVEL > 0 +# define DBG1(prefix, data, len) odDebug(prefix, data, len) +#else +# define DBG1(prefix, data, len) +#endif + +#if DEBUG_LEVEL > 1 +# define DBG2(prefix, data, len) odDebug(prefix, data, len) +#else +# define DBG2(prefix, data, len) +#endif + +/* ------------------------------------------------------------------------- */ + +extern void odDebug(uchar prefix, uchar *data, uchar len); +void uartPutc(char c); +void printHex(uchar c); + +/* Try to find our control registers; ATMEL likes to rename these */ + +#if defined UBRR +# define ODDBG_UBRR UBRR +#elif defined UBRRL +# define ODDBG_UBRR UBRRL +#elif defined UBRR0 +# define ODDBG_UBRR UBRR0 +#elif defined UBRR0L +# define ODDBG_UBRR UBRR0L +#endif + +#if defined UCR +# define ODDBG_UCR UCR +#elif defined UCSRB +# define ODDBG_UCR UCSRB +#elif defined UCSR0B +# define ODDBG_UCR UCSR0B +#endif + +#if defined TXEN +# define ODDBG_TXEN TXEN +#else +# define ODDBG_TXEN TXEN0 +#endif + +#if defined USR +# define ODDBG_USR USR +#elif defined UCSRA +# define ODDBG_USR UCSRA +#elif defined UCSR0A +# define ODDBG_USR UCSR0A +#endif + +#if defined UDRE +# define ODDBG_UDRE UDRE +#else +# define ODDBG_UDRE UDRE0 +#endif + +#if defined UDR +# define ODDBG_UDR UDR +#elif defined UDR0 +# define ODDBG_UDR UDR0 +#endif + +static inline void odDebugInit(void) +{ + ODDBG_UCR |= (1< #include "timer.h" -uint16_t timer_count = 0; +volatile uint16_t timer_count = 0; // Configure timer 0 to generate a timer overflow interrupt every // 256*1024 clock cycles, or approx 61 Hz when using 16 MHz clock @@ -19,20 +19,21 @@ void timer_init(void) inline void timer_clear(void) { + uint8_t sreg = SREG; cli(); timer_count = 0; - sei(); + SREG = sreg; } inline uint16_t timer_read(void) { - uint8_t _sreg = SREG; uint16_t t; + uint8_t sreg = SREG; cli(); t = timer_count; - SREG = _sreg; + SREG = sreg; return t; } @@ -40,12 +41,12 @@ uint16_t timer_read(void) inline uint16_t timer_elapsed(uint16_t last) { - uint8_t _sreg = SREG; uint16_t t; + uint8_t sreg = SREG; cli(); t = timer_count; - SREG = _sreg; + SREG = sreg; return TIMER_DIFF(t, last); } @@ -58,4 +59,3 @@ ISR(TIMER0_OVF_vect) { timer_count++; } - diff --git a/timer.h b/timer.h index 8ddf9e7e2..2dfa08a0f 100644 --- a/timer.h +++ b/timer.h @@ -6,7 +6,7 @@ #define TIMER_DIFF(a, b) ((a) >= (b) ? (a) - (b) : UINT16_MAX - (b) + (a)) -extern uint16_t timer_count; +extern volatile uint16_t timer_count; void timer_init(void); diff --git a/usbdrv/Changelog.txt b/usbdrv/Changelog.txt new file mode 100644 index 000000000..5c6354ab1 --- /dev/null +++ b/usbdrv/Changelog.txt @@ -0,0 +1,308 @@ +This file documents changes in the firmware-only USB driver for atmel's AVR +microcontrollers. New entries are always appended to the end of the file. +Scroll down to the bottom to see the most recent changes. + +2005-04-01: + - Implemented endpoint 1 as interrupt-in endpoint. + - Moved all configuration options to usbconfig.h which is not part of the + driver. + - Changed interface for usbVendorSetup(). + - Fixed compatibility with ATMega8 device. + - Various minor optimizations. + +2005-04-11: + - Changed interface to application: Use usbFunctionSetup(), usbFunctionRead() + and usbFunctionWrite() now. Added configuration options to choose which + of these functions to compile in. + - Assembler module delivers receive data non-inverted now. + - Made register and bit names compatible with more AVR devices. + +2005-05-03: + - Allow address of usbRxBuf on any memory page as long as the buffer does + not cross 256 byte page boundaries. + - Better device compatibility: works with Mega88 now. + - Code optimization in debugging module. + - Documentation updates. + +2006-01-02: + - Added (free) default Vendor- and Product-IDs bought from voti.nl. + - Added USBID-License.txt file which defines the rules for using the free + shared VID/PID pair. + - Added Readme.txt to the usbdrv directory which clarifies administrative + issues. + +2006-01-25: + - Added "configured state" to become more standards compliant. + - Added "HALT" state for interrupt endpoint. + - Driver passes the "USB Command Verifier" test from usb.org now. + - Made "serial number" a configuration option. + - Minor optimizations, we now recommend compiler option "-Os" for best + results. + - Added a version number to usbdrv.h + +2006-02-03: + - New configuration variable USB_BUFFER_SECTION for the memory section where + the USB rx buffer will go. This defaults to ".bss" if not defined. Since + this buffer MUST NOT cross 256 byte pages (not even touch a page at the + end), the user may want to pass a linker option similar to + "-Wl,--section-start=.mybuffer=0x800060". + - Provide structure for usbRequest_t. + - New defines for USB constants. + - Prepared for HID implementations. + - Increased data size limit for interrupt transfers to 8 bytes. + - New macro usbInterruptIsReady() to query interrupt buffer state. + +2006-02-18: + - Ensure that the data token which is sent as an ack to an OUT transfer is + always zero sized. This fixes a bug where the host reports an error after + sending an out transfer to the device, although all data arrived at the + device. + - Updated docs in usbdrv.h to reflect changed API in usbFunctionWrite(). + +* Release 2006-02-20 + + - Give a compiler warning when compiling with debugging turned on. + - Added Oleg Semyonov's changes for IAR-cc compatibility. + - Added new (optional) functions usbDeviceConnect() and usbDeviceDisconnect() + (also thanks to Oleg!). + - Rearranged tests in usbPoll() to save a couple of instructions in the most + likely case that no actions are pending. + - We need a delay between the SET ADDRESS request until the new address + becomes active. This delay was handled in usbPoll() until now. Since the + spec says that the delay must not exceed 2ms, previous versions required + aggressive polling during the enumeration phase. We have now moved the + handling of the delay into the interrupt routine. + - We must not reply with NAK to a SETUP transaction. We can only achieve this + by making sure that the rx buffer is empty when SETUP tokens are expected. + We therefore don't pass zero sized data packets from the status phase of + a transfer to usbPoll(). This change MAY cause troubles if you rely on + receiving a less than 8 bytes long packet in usbFunctionWrite() to + identify the end of a transfer. usbFunctionWrite() will NEVER be called + with a zero length. + +* Release 2006-03-14 + + - Improved IAR C support: tiny memory model, more devices + - Added template usbconfig.h file under the name usbconfig-prototype.h + +* Release 2006-03-26 + + - Added provision for one more interrupt-in endpoint (endpoint 3). + - Added provision for one interrupt-out endpoint (endpoint 1). + - Added flowcontrol macros for USB. + - Added provision for custom configuration descriptor. + - Allow ANY two port bits for D+ and D-. + - Merged (optional) receive endpoint number into global usbRxToken variable. + - Use USB_CFG_IOPORTNAME instead of USB_CFG_IOPORT. We now construct the + variable name from the single port letter instead of computing the address + of related ports from the output-port address. + +* Release 2006-06-26 + + - Updated documentation in usbdrv.h and usbconfig-prototype.h to reflect the + new features. + - Removed "#warning" directives because IAR does not understand them. Use + unused static variables instead to generate a warning. + - Do not include when compiling with IAR. + - Introduced USB_CFG_DESCR_PROPS_* in usbconfig.h to configure how each + USB descriptor should be handled. It is now possible to provide descriptor + data in Flash, RAM or dynamically at runtime. + - STALL is now a status in usbTxLen* instead of a message. We can now conform + to the spec and leave the stall status pending until it is cleared. + - Made usbTxPacketCnt1 and usbTxPacketCnt3 public. This allows the + application code to reset data toggling on interrupt pipes. + +* Release 2006-07-18 + + - Added an #if !defined __ASSEMBLER__ to the warning in usbdrv.h. This fixes + an assembler error. + - usbDeviceDisconnect() takes pull-up resistor to high impedance now. + +* Release 2007-02-01 + + - Merged in some code size improvements from usbtiny (thanks to Dick + Streefland for these optimizations!) + - Special alignment requirement for usbRxBuf not required any more. Thanks + again to Dick Streefland for this hint! + - Reverted to "#warning" instead of unused static variables -- new versions + of IAR CC should handle this directive. + - Changed Open Source license to GNU GPL v2 in order to make linking against + other free libraries easier. We no longer require publication of the + circuit diagrams, but we STRONGLY encourage it. If you improve the driver + itself, PLEASE grant us a royalty free license to your changes for our + commercial license. + +* Release 2007-03-29 + + - New configuration option "USB_PUBLIC" in usbconfig.h. + - Set USB version number to 1.10 instead of 1.01. + - Code used USB_CFG_DESCR_PROPS_STRING_DEVICE and + USB_CFG_DESCR_PROPS_STRING_PRODUCT inconsistently. Changed all occurrences + to USB_CFG_DESCR_PROPS_STRING_PRODUCT. + - New assembler module for 16.5 MHz RC oscillator clock with PLL in receiver + code. + - New assembler module for 16 MHz crystal. + - usbdrvasm.S contains common code only, clock-specific parts have been moved + to usbdrvasm12.S, usbdrvasm16.S and usbdrvasm165.S respectively. + +* Release 2007-06-25 + + - 16 MHz module: Do SE0 check in stuffed bits as well. + +* Release 2007-07-07 + + - Define hi8(x) for IAR compiler to limit result to 8 bits. This is necessary + for negative values. + - Added 15 MHz module contributed by V. Bosch. + - Interrupt vector name can now be configured. This is useful if somebody + wants to use a different hardware interrupt than INT0. + +* Release 2007-08-07 + + - Moved handleIn3 routine in usbdrvasm16.S so that relative jump range is + not exceeded. + - More config options: USB_RX_USER_HOOK(), USB_INITIAL_DATATOKEN, + USB_COUNT_SOF + - USB_INTR_PENDING can now be a memory address, not just I/O + +* Release 2007-09-19 + + - Split out common parts of assembler modules into separate include file + - Made endpoint numbers configurable so that given interface definitions + can be matched. See USB_CFG_EP3_NUMBER in usbconfig-prototype.h. + - Store endpoint number for interrupt/bulk-out so that usbFunctionWriteOut() + can handle any number of endpoints. + - Define usbDeviceConnect() and usbDeviceDisconnect() even if no + USB_CFG_PULLUP_IOPORTNAME is defined. Directly set D+ and D- to 0 in this + case. + +* Release 2007-12-01 + + - Optimize usbDeviceConnect() and usbDeviceDisconnect() for less code size + when USB_CFG_PULLUP_IOPORTNAME is not defined. + +* Release 2007-12-13 + + - Renamed all include-only assembler modules from *.S to *.inc so that + people don't add them to their project sources. + - Distribute leap bits in tx loop more evenly for 16 MHz module. + - Use "macro" and "endm" instead of ".macro" and ".endm" for IAR + - Avoid compiler warnings for constant expr range by casting some values in + USB descriptors. + +* Release 2008-01-21 + + - Fixed bug in 15 and 16 MHz module where the new address set with + SET_ADDRESS was already accepted at the next NAK or ACK we send, not at + the next data packet we send. This caused problems when the host polled + too fast. Thanks to Alexander Neumann for his help and patience debugging + this issue! + +* Release 2008-02-05 + + - Fixed bug in 16.5 MHz module where a register was used in the interrupt + handler before it was pushed. This bug was introduced with version + 2007-09-19 when common parts were moved to a separate file. + - Optimized CRC routine (thanks to Reimar Doeffinger). + +* Release 2008-02-16 + + - Removed outdated IAR compatibility stuff (code sections). + - Added hook macros for USB_RESET_HOOK() and USB_SET_ADDRESS_HOOK(). + - Added optional routine usbMeasureFrameLength() for calibration of the + internal RC oscillator. + +* Release 2008-02-28 + + - USB_INITIAL_DATATOKEN defaults to USBPID_DATA1 now, which means that we + start with sending USBPID_DATA0. + - Changed defaults in usbconfig-prototype.h + - Added free USB VID/PID pair for MIDI class devices + - Restructured AVR-USB as separate package, not part of PowerSwitch any more. + +* Release 2008-04-18 + + - Restructured usbdrv.c so that it is easier to read and understand. + - Better code optimization with gcc 4. + - If a second interrupt in endpoint is enabled, also add it to config + descriptor. + - Added config option for long transfers (above 254 bytes), see + USB_CFG_LONG_TRANSFERS in usbconfig.h. + - Added 20 MHz module contributed by Jeroen Benschop. + +* Release 2008-05-13 + + - Fixed bug in libs-host/hiddata.c function usbhidGetReport(): length + was not incremented, pointer to length was incremented instead. + - Added code to command line tool(s) which claims an interface. This code + is disabled by default, but may be necessary on newer Linux kernels. + - Added usbconfig.h option "USB_CFG_CHECK_DATA_TOGGLING". + - New header "usbportability.h" prepares ports to other development + environments. + - Long transfers (above 254 bytes) did not work when usbFunctionRead() was + used to supply the data. Fixed this bug. [Thanks to Alexander Neumann!] + - In hiddata.c (example code for sending/receiving data over HID), use + USB_RECIP_DEVICE instead of USB_RECIP_INTERFACE for control transfers so + that we need not claim the interface. + - in usbPoll() loop 20 times polling for RESET state instead of 10 times. + This accounts for the higher clock rates we now support. + - Added a module for 12.8 MHz RC oscillator with PLL in receiver loop. + - Added hook to SOF code so that oscillator can be tuned to USB frame clock. + - Added timeout to waitForJ loop. Helps preventing unexpected hangs. + - Added example code for oscillator tuning to libs-device (thanks to + Henrik Haftmann for the idea to this routine). + - Implemented option USB_CFG_SUPPRESS_INTR_CODE. + +* Release 2008-10-22 + + - Fixed libs-device/osctune.h: OSCCAL is memory address on ATMega88 and + similar, not offset of 0x20 needs to be added. + - Allow distribution under GPLv3 for those who have to link against other + code distributed under GPLv3. + +* Release 2008-11-26 + + - Removed libusb-win32 dependency for hid-data example in Makefile.windows. + It was never required and confused many people. + - Added extern uchar usbRxToken to usbdrv.h. + - Integrated a module with CRC checks at 18 MHz by Lukas Schrittwieser. + +* Release 2009-03-23 + + - Hid-mouse example used settings from hid-data example, fixed that. + - Renamed project to V-USB due to a trademark issue with Atmel(r). + - Changed CommercialLicense.txt and USBID-License.txt to make the + background of USB ID registration clearer. + +* Release 2009-04-15 + + - Changed CommercialLicense.txt to reflect the new range of PIDs from + Jason Kotzin. + - Removed USBID-License.txt in favor of USB-IDs-for-free.txt and + USB-ID-FAQ.txt + - Fixed a bug in the 12.8 MHz module: End Of Packet decection was made in + the center between bit 0 and 1 of each byte. This is where the data lines + are expected to change and the sampled data may therefore be nonsense. + We therefore check EOP ONLY if bits 0 AND 1 have both been read as 0 on D-. + - Fixed a bitstuffing problem in the 16 MHz module: If bit 6 was stuffed, + the unstuffing code in the receiver routine was 1 cycle too long. If + multiple bytes had the unstuffing in bit 6, the error summed up until the + receiver was out of sync. + - Included option for faster CRC routine. + Thanks to Slawomir Fras (BoskiDialer) for this code! + - Updated bits in Configuration Descriptor's bmAttributes according to + USB 1.1 (in particular bit 7, it is a must-be-set bit now). + +* Release 2009-08-22 + + - Moved first DBG1() after odDebugInit() in all examples. + - Use vector INT0_vect instead of SIG_INTERRUPT0 if defined. This makes + V-USB compatible with the new "p" suffix devices (e.g. ATMega328p). + - USB_CFG_CLOCK_KHZ setting is now required in usbconfig.h (no default any + more). + - New option USB_CFG_DRIVER_FLASH_PAGE allows boot loaders on devices with + more than 64 kB flash. + - Built-in configuration descriptor allows custom definition for second + endpoint now. + +* Release 2010-07-15 diff --git a/usbdrv/CommercialLicense.txt b/usbdrv/CommercialLicense.txt new file mode 100644 index 000000000..11d07d9df --- /dev/null +++ b/usbdrv/CommercialLicense.txt @@ -0,0 +1,166 @@ +V-USB Driver Software License Agreement +Version 2009-08-03 + +THIS LICENSE AGREEMENT GRANTS YOU CERTAIN RIGHTS IN A SOFTWARE. YOU CAN +ENTER INTO THIS AGREEMENT AND ACQUIRE THE RIGHTS OUTLINED BELOW BY PAYING +THE AMOUNT ACCORDING TO SECTION 4 ("PAYMENT") TO OBJECTIVE DEVELOPMENT. + + +1 DEFINITIONS + +1.1 "OBJECTIVE DEVELOPMENT" shall mean OBJECTIVE DEVELOPMENT Software GmbH, +Grosse Schiffgasse 1A/7, 1020 Wien, AUSTRIA. + +1.2 "You" shall mean the Licensee. + +1.3 "V-USB" shall mean all files included in the package distributed under +the name "vusb" by OBJECTIVE DEVELOPMENT (http://www.obdev.at/vusb/) +unless otherwise noted. This includes the firmware-only USB device +implementation for Atmel AVR microcontrollers, some simple device examples +and host side software examples and libraries. + + +2 LICENSE GRANTS + +2.1 Source Code. OBJECTIVE DEVELOPMENT shall furnish you with the source +code of V-USB. + +2.2 Distribution and Use. OBJECTIVE DEVELOPMENT grants you the +non-exclusive right to use, copy and distribute V-USB with your hardware +product(s), restricted by the limitations in section 3 below. + +2.3 Modifications. OBJECTIVE DEVELOPMENT grants you the right to modify +the source code and your copy of V-USB according to your needs. + +2.4 USB IDs. OBJECTIVE DEVELOPMENT furnishes you with one or two USB +Product ID(s), sent to you in e-mail. These Product IDs are reserved +exclusively for you. OBJECTIVE DEVELOPMENT has obtained USB Product ID +ranges under the Vendor ID 5824 from Wouter van Ooijen (Van Ooijen +Technische Informatica, www.voti.nl) and under the Vendor ID 8352 from +Jason Kotzin (Clay Logic, www.claylogic.com). Both owners of the Vendor IDs +have obtained these IDs from the USB Implementers Forum, Inc. +(www.usb.org). OBJECTIVE DEVELOPMENT disclaims all liability which might +arise from the assignment of USB IDs. + +2.5 USB Certification. Although not part of this agreement, we want to make +it clear that you cannot become USB certified when you use V-USB or a USB +Product ID assigned by OBJECTIVE DEVELOPMENT. AVR microcontrollers don't +meet the electrical specifications required by the USB specification and +the USB Implementers Forum certifies only members who bought a Vendor ID of +their own. + + +3 LICENSE RESTRICTIONS + +3.1 Number of Units. Only one of the following three definitions is +applicable. Which one is determined by the amount you pay to OBJECTIVE +DEVELOPMENT, see section 4 ("Payment") below. + +Hobby License: You may use V-USB according to section 2 above in no more +than 5 hardware units. These units must not be sold for profit. + +Entry Level License: You may use V-USB according to section 2 above in no +more than 150 hardware units. + +Professional License: You may use V-USB according to section 2 above in +any number of hardware units, except for large scale production ("unlimited +fair use"). Quantities below 10,000 units are not considered large scale +production. If your reach quantities which are obviously large scale +production, you must pay a license fee of 0.10 EUR per unit for all units +above 10,000. + +3.2 Rental. You may not rent, lease, or lend V-USB or otherwise encumber +any copy of V-USB, or any of the rights granted herein. + +3.3 Transfer. You may not transfer your rights under this Agreement to +another party without OBJECTIVE DEVELOPMENT's prior written consent. If +such consent is obtained, you may permanently transfer this License to +another party. The recipient of such transfer must agree to all terms and +conditions of this Agreement. + +3.4 Reservation of Rights. OBJECTIVE DEVELOPMENT retains all rights not +expressly granted. + +3.5 Non-Exclusive Rights. Your license rights under this Agreement are +non-exclusive. + +3.6 Third Party Rights. This Agreement cannot grant you rights controlled +by third parties. In particular, you are not allowed to use the USB logo or +other trademarks owned by the USB Implementers Forum, Inc. without their +consent. Since such consent depends on USB certification, it should be +noted that V-USB will not pass certification because it does not +implement checksum verification and the microcontroller ports do not meet +the electrical specifications. + + +4 PAYMENT + +The payment amount depends on the variation of this agreement (according to +section 3.1) into which you want to enter. Concrete prices are listed on +OBJECTIVE DEVELOPMENT's web site, usually at +http://www.obdev.at/vusb/license.html. You agree to pay the amount listed +there to OBJECTIVE DEVELOPMENT or OBJECTIVE DEVELOPMENT's payment processor +or reseller. + + +5 COPYRIGHT AND OWNERSHIP + +V-USB is protected by copyright laws and international copyright +treaties, as well as other intellectual property laws and treaties. V-USB +is licensed, not sold. + + +6 TERM AND TERMINATION + +6.1 Term. This Agreement shall continue indefinitely. However, OBJECTIVE +DEVELOPMENT may terminate this Agreement and revoke the granted license and +USB-IDs if you fail to comply with any of its terms and conditions. + +6.2 Survival of Terms. All provisions regarding secrecy, confidentiality +and limitation of liability shall survive termination of this agreement. + + +7 DISCLAIMER OF WARRANTY AND LIABILITY + +LIMITED WARRANTY. V-USB IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY +KIND. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, OBJECTIVE +DEVELOPMENT AND ITS SUPPLIERS HEREBY DISCLAIM ALL WARRANTIES, EITHER +EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES +OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND +NON-INFRINGEMENT, WITH REGARD TO V-USB, AND THE PROVISION OF OR FAILURE +TO PROVIDE SUPPORT SERVICES. THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL +RIGHTS. YOU MAY HAVE OTHERS, WHICH VARY FROM STATE/JURISDICTION TO +STATE/JURISDICTION. + +LIMITATION OF LIABILITY. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, +IN NO EVENT SHALL OBJECTIVE DEVELOPMENT OR ITS SUPPLIERS BE LIABLE FOR ANY +SPECIAL, INCIDENTAL, INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER +(INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, +BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY +LOSS) ARISING OUT OF THE USE OF OR INABILITY TO USE V-USB OR THE +PROVISION OF OR FAILURE TO PROVIDE SUPPORT SERVICES, EVEN IF OBJECTIVE +DEVELOPMENT HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. IN ANY +CASE, OBJECTIVE DEVELOPMENT'S ENTIRE LIABILITY UNDER ANY PROVISION OF THIS +AGREEMENT SHALL BE LIMITED TO THE AMOUNT ACTUALLY PAID BY YOU FOR V-USB. + + +8 MISCELLANEOUS TERMS + +8.1 Marketing. OBJECTIVE DEVELOPMENT has the right to mention for marketing +purposes that you entered into this agreement. + +8.2 Entire Agreement. This document represents the entire agreement between +OBJECTIVE DEVELOPMENT and you. It may only be modified in writing signed by +an authorized representative of both, OBJECTIVE DEVELOPMENT and you. + +8.3 Severability. In case a provision of these terms and conditions should +be or become partly or entirely invalid, ineffective, or not executable, +the validity of all other provisions shall not be affected. + +8.4 Applicable Law. This agreement is governed by the laws of the Republic +of Austria. + +8.5 Responsible Courts. The responsible courts in Vienna/Austria will have +exclusive jurisdiction regarding all disputes in connection with this +agreement. + diff --git a/usbdrv/License.txt b/usbdrv/License.txt new file mode 100644 index 000000000..4460cfbae --- /dev/null +++ b/usbdrv/License.txt @@ -0,0 +1,361 @@ +OBJECTIVE DEVELOPMENT GmbH's V-USB driver software is distributed under the +terms and conditions of the GNU GPL version 2 or the GNU GPL version 3. It is +your choice whether you apply the terms of version 2 or version 3. The full +text of GPLv2 is included below. In addition to the requirements in the GPL, +we STRONGLY ENCOURAGE you to do the following: + +(1) Publish your entire project on a web site and drop us a note with the URL. +Use the form at http://www.obdev.at/vusb/feedback.html for your submission. + +(2) Adhere to minimum publication standards. Please include AT LEAST: + - a circuit diagram in PDF, PNG or GIF format + - full source code for the host software + - a Readme.txt file in ASCII format which describes the purpose of the + project and what can be found in which directories and which files + - a reference to http://www.obdev.at/vusb/ + +(3) If you improve the driver firmware itself, please give us a free license +to your modifications for our commercial license offerings. + + + + GNU GENERAL PUBLIC LICENSE + Version 2, June 1991 + + Copyright (C) 1989, 1991 Free Software Foundation, Inc. + 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +License is intended to guarantee your freedom to share and change free +software--to make sure the software is free for all its users. This +General Public License applies to most of the Free Software +Foundation's software and to any other program whose authors commit to +using it. (Some other Free Software Foundation software is covered by +the GNU Library General Public License instead.) You can apply it to +your programs, too. + + When we speak of free software, we are referring to freedom, not +price. Our General Public Licenses are designed to make sure that you +have the freedom to distribute copies of free software (and charge for +this service if you wish), that you receive source code or can get it +if you want it, that you can change the software or use pieces of it +in new free programs; and that you know you can do these things. + + To protect your rights, we need to make restrictions that forbid +anyone to deny you these rights or to ask you to surrender the rights. +These restrictions translate to certain responsibilities for you if you +distribute copies of the software, or if you modify it. + + For example, if you distribute copies of such a program, whether +gratis or for a fee, you must give the recipients all the rights that +you have. You must make sure that they, too, receive or can get the +source code. And you must show them these terms so they know their +rights. + + We protect your rights with two steps: (1) copyright the software, and +(2) offer you this license which gives you legal permission to copy, +distribute and/or modify the software. + + Also, for each author's protection and ours, we want to make certain +that everyone understands that there is no warranty for this free +software. If the software is modified by someone else and passed on, we +want its recipients to know that what they have is not the original, so +that any problems introduced by others will not reflect on the original +authors' reputations. + + Finally, any free program is threatened constantly by software +patents. We wish to avoid the danger that redistributors of a free +program will individually obtain patent licenses, in effect making the +program proprietary. To prevent this, we have made it clear that any +patent must be licensed for everyone's free use or not licensed at all. + + The precise terms and conditions for copying, distribution and +modification follow. + + GNU GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License applies to any program or other work which contains +a notice placed by the copyright holder saying it may be distributed +under the terms of this General Public License. The "Program", below, +refers to any such program or work, and a "work based on the Program" +means either the Program or any derivative work under copyright law: +that is to say, a work containing the Program or a portion of it, +either verbatim or with modifications and/or translated into another +language. (Hereinafter, translation is included without limitation in +the term "modification".) Each licensee is addressed as "you". + +Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running the Program is not restricted, and the output from the Program +is covered only if its contents constitute a work based on the +Program (independent of having been made by running the Program). +Whether that is true depends on what the Program does. + + 1. You may copy and distribute verbatim copies of the Program's +source code as you receive it, in any medium, provided that you +conspicuously and appropriately publish on each copy an appropriate +copyright notice and disclaimer of warranty; keep intact all the +notices that refer to this License and to the absence of any warranty; +and give any other recipients of the Program a copy of this License +along with the Program. + +You may charge a fee for the physical act of transferring a copy, and +you may at your option offer warranty protection in exchange for a fee. + + 2. You may modify your copy or copies of the Program or any portion +of it, thus forming a work based on the Program, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) You must cause the modified files to carry prominent notices + stating that you changed the files and the date of any change. + + b) You must cause any work that you distribute or publish, that in + whole or in part contains or is derived from the Program or any + part thereof, to be licensed as a whole at no charge to all third + parties under the terms of this License. + + c) If the modified program normally reads commands interactively + when run, you must cause it, when started running for such + interactive use in the most ordinary way, to print or display an + announcement including an appropriate copyright notice and a + notice that there is no warranty (or else, saying that you provide + a warranty) and that users may redistribute the program under + these conditions, and telling the user how to view a copy of this + License. (Exception: if the Program itself is interactive but + does not normally print such an announcement, your work based on + the Program is not required to print an announcement.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Program, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Program, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Program. + +In addition, mere aggregation of another work not based on the Program +with the Program (or with a work based on the Program) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may copy and distribute the Program (or a work based on it, +under Section 2) in object code or executable form under the terms of +Sections 1 and 2 above provided that you also do one of the following: + + a) Accompany it with the complete corresponding machine-readable + source code, which must be distributed under the terms of Sections + 1 and 2 above on a medium customarily used for software interchange; or, + + b) Accompany it with a written offer, valid for at least three + years, to give any third party, for a charge no more than your + cost of physically performing source distribution, a complete + machine-readable copy of the corresponding source code, to be + distributed under the terms of Sections 1 and 2 above on a medium + customarily used for software interchange; or, + + c) Accompany it with the information you received as to the offer + to distribute corresponding source code. (This alternative is + allowed only for noncommercial distribution and only if you + received the program in object code or executable form with such + an offer, in accord with Subsection b above.) + +The source code for a work means the preferred form of the work for +making modifications to it. For an executable work, complete source +code means all the source code for all modules it contains, plus any +associated interface definition files, plus the scripts used to +control compilation and installation of the executable. However, as a +special exception, the source code distributed need not include +anything that is normally distributed (in either source or binary +form) with the major components (compiler, kernel, and so on) of the +operating system on which the executable runs, unless that component +itself accompanies the executable. + +If distribution of executable or object code is made by offering +access to copy from a designated place, then offering equivalent +access to copy the source code from the same place counts as +distribution of the source code, even though third parties are not +compelled to copy the source along with the object code. + + 4. You may not copy, modify, sublicense, or distribute the Program +except as expressly provided under this License. Any attempt +otherwise to copy, modify, sublicense or distribute the Program is +void, and will automatically terminate your rights under this License. +However, parties who have received copies, or rights, from you under +this License will not have their licenses terminated so long as such +parties remain in full compliance. + + 5. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Program or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Program (or any work based on the +Program), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Program or works based on it. + + 6. Each time you redistribute the Program (or any work based on the +Program), the recipient automatically receives a license from the +original licensor to copy, distribute or modify the Program subject to +these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties to +this License. + + 7. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Program at all. For example, if a patent +license would not permit royalty-free redistribution of the Program by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Program. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system, which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 8. If the distribution and/or use of the Program is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Program under this License +may add an explicit geographical distribution limitation excluding +those countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 9. The Free Software Foundation may publish revised and/or new versions +of the General Public License from time to time. Such new versions will +be similar in spirit to the present version, but may differ in detail to +address new problems or concerns. + +Each version is given a distinguishing version number. If the Program +specifies a version number of this License which applies to it and "any +later version", you have the option of following the terms and conditions +either of that version or of any later version published by the Free +Software Foundation. If the Program does not specify a version number of +this License, you may choose any version ever published by the Free Software +Foundation. + + 10. If you wish to incorporate parts of the Program into other free +programs whose distribution conditions are different, write to the author +to ask for permission. For software which is copyrighted by the Free +Software Foundation, write to the Free Software Foundation; we sometimes +make exceptions for this. Our decision will be guided by the two goals +of preserving the free status of all derivatives of our free software and +of promoting the sharing and reuse of software generally. + + NO WARRANTY + + 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY +FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN +OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES +PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED +OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS +TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE +PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, +REPAIR OR CORRECTION. + + 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING +WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR +REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, +INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING +OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED +TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY +YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER +PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE +POSSIBILITY OF SUCH DAMAGES. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Programs + + If you develop a new program, and you want it to be of the greatest +possible use to the public, the best way to achieve this is to make it +free software which everyone can redistribute and change under these terms. + + To do so, attach the following notices to the program. It is safest +to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least +the "copyright" line and a pointer to where the full notice is found. + + + Copyright (C) + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + + +Also add information on how to contact you by electronic and paper mail. + +If the program is interactive, make it output a short notice like this +when it starts in an interactive mode: + + Gnomovision version 69, Copyright (C) year name of author + Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'. + This is free software, and you are welcome to redistribute it + under certain conditions; type `show c' for details. + +The hypothetical commands `show w' and `show c' should show the appropriate +parts of the General Public License. Of course, the commands you use may +be called something other than `show w' and `show c'; they could even be +mouse-clicks or menu items--whatever suits your program. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the program, if +necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the program + `Gnomovision' (which makes passes at compilers) written by James Hacker. + + , 1 April 1989 + Ty Coon, President of Vice + +This General Public License does not permit incorporating your program into +proprietary programs. If your program is a subroutine library, you may +consider it more useful to permit linking proprietary applications with the +library. If this is what you want to do, use the GNU Library General +Public License instead of this License. diff --git a/usbdrv/Readme.txt b/usbdrv/Readme.txt new file mode 100644 index 000000000..970dc66b2 --- /dev/null +++ b/usbdrv/Readme.txt @@ -0,0 +1,172 @@ +This is the Readme file to Objective Development's firmware-only USB driver +for Atmel AVR microcontrollers. For more information please visit +http://www.obdev.at/vusb/ + +This directory contains the USB firmware only. Copy it as-is to your own +project and add all .c and .S files to your project (these files are marked +with an asterisk in the list below). Then copy usbconfig-prototype.h as +usbconfig.h to your project and edit it according to your configuration. + + +TECHNICAL DOCUMENTATION +======================= +The technical documentation (API) for the firmware driver is contained in the +file "usbdrv.h". Please read all of it carefully! Configuration options are +documented in "usbconfig-prototype.h". + +The driver consists of the following files: + Readme.txt ............. The file you are currently reading. + Changelog.txt .......... Release notes for all versions of the driver. + usbdrv.h ............... Driver interface definitions and technical docs. +* usbdrv.c ............... High level language part of the driver. Link this + module to your code! +* usbdrvasm.S ............ Assembler part of the driver. This module is mostly + a stub and includes one of the usbdrvasm*.S files + depending on processor clock. Link this module to + your code! + usbdrvasm*.inc ......... Assembler routines for particular clock frequencies. + Included by usbdrvasm.S, don't link it directly! + asmcommon.inc .......... Common assembler routines. Included by + usbdrvasm*.inc, don't link it directly! + usbconfig-prototype.h .. Prototype for your own usbdrv.h file. +* oddebug.c .............. Debug functions. Only used when DEBUG_LEVEL is + defined to a value greater than 0. Link this module + to your code! + oddebug.h .............. Interface definitions of the debug module. + usbportability.h ....... Header with compiler-dependent stuff. + usbdrvasm.asm .......... Compatibility stub for IAR-C-compiler. Use this + module instead of usbdrvasm.S when you assembler + with IAR's tools. + License.txt ............ Open Source license for this driver. + CommercialLicense.txt .. Optional commercial license for this driver. + USB-ID-FAQ.txt ......... General infos about USB Product- and Vendor-IDs. + USB-IDs-for-free.txt ... List and terms of use for free shared PIDs. + +(*) ... These files should be linked to your project. + + +CPU CORE CLOCK FREQUENCY +======================== +We supply assembler modules for clock frequencies of 12 MHz, 12.8 MHz, 15 MHz, +16 MHz, 16.5 MHz 18 MHz and 20 MHz. Other clock rates are not supported. The +actual clock rate must be configured in usbconfig.h. + +12 MHz Clock +This is the traditional clock rate of V-USB because it's the lowest clock +rate where the timing constraints of the USB spec can be met. + +15 MHz Clock +Similar to 12 MHz, but some NOPs inserted. On the other hand, the higher clock +rate allows for some loops which make the resulting code size somewhat smaller +than the 12 MHz version. + +16 MHz Clock +This clock rate has been added for users of the Arduino board and other +ready-made boards which come with a fixed 16 MHz crystal. It's also an option +if you need the slightly higher clock rate for performance reasons. Since +16 MHz is not divisible by the USB low speed bit clock of 1.5 MHz, the code +is somewhat tricky and has to insert a leap cycle every third byte. + +12.8 MHz and 16.5 MHz Clock +The assembler modules for these clock rates differ from the other modules +because they have been built for an RC oscillator with only 1% precision. The +receiver code inserts leap cycles to compensate for clock deviations. 1% is +also the precision which can be achieved by calibrating the internal RC +oscillator of the AVR. Please note that only AVRs with internal 64 MHz PLL +oscillator can reach 16.5 MHz with the RC oscillator. This includes the very +popular ATTiny25, ATTiny45, ATTiny85 series as well as the ATTiny26. Almost +all AVRs can reach 12.8 MHz, although this is outside the specified range. + +See the EasyLogger example at http://www.obdev.at/vusb/easylogger.html for +code which calibrates the RC oscillator based on the USB frame clock. + +18 MHz Clock +This module is closer to the USB specification because it performs an on the +fly CRC check for incoming packets. Packets with invalid checksum are +discarded as required by the spec. If you also implement checks for data +PID toggling on application level (see option USB_CFG_CHECK_DATA_TOGGLING +in usbconfig.h for more info), this ensures data integrity. Due to the CRC +tables and alignment requirements, this code is bigger than modules for other +clock rates. To activate this module, you must define USB_CFG_CHECK_CRC to 1 +and USB_CFG_CLOCK_KHZ to 18000 in usbconfig.h. + +20 MHz Clock +This module is for people who won't do it with less than the maximum. Since +20 MHz is not divisible by the USB low speed bit clock of 1.5 MHz, the code +uses similar tricks as the 16 MHz module to insert leap cycles. + + +USB IDENTIFIERS +=============== +Every USB device needs a vendor- and a product-identifier (VID and PID). VIDs +are obtained from usb.org for a price of 1,500 USD. Once you have a VID, you +can assign PIDs at will. + +Since an entry level cost of 1,500 USD is too high for most small companies +and hobbyists, we provide some VID/PID pairs for free. See the file +USB-IDs-for-free.txt for details. + +Objective Development also has some license offerings which include product +IDs. See http://www.obdev.at/vusb/ for details. + + +DEVELOPMENT SYSTEM +================== +This driver has been developed and optimized for the GNU compiler version 3 +and 4. We recommend that you use the GNU compiler suite because it is freely +available. V-USB has also been ported to the IAR compiler and assembler. It +has been tested with IAR 4.10B/W32 and 4.12A/W32 on an ATmega8 with the +"small" and "tiny" memory model. Not every release is tested with IAR CC and +the driver may therefore fail to compile with IAR. Please note that gcc is +more efficient for usbdrv.c because this module has been deliberately +optimized for gcc. + +Gcc version 3 produces smaller code than version 4 due to new optimizing +capabilities which don't always improve things on 8 bit CPUs. The code size +generated by gcc 4 can be reduced with the compiler options +-fno-move-loop-invariants, -fno-tree-scev-cprop and +-fno-inline-small-functions in addition to -Os. On devices with more than +8k of flash memory, we also recommend the linker option --relax (written as +-Wl,--relax for gcc) to convert absolute calls into relative where possible. + +For more information about optimizing options see: + + http://www.tty1.net/blog/2008-04-29-avr-gcc-optimisations_en.html + +These optimizations are good for gcc 4.x. Version 3.x of gcc does not support +most of these options and produces good code anyway. + + +USING V-USB FOR FREE +==================== +The AVR firmware driver is published under the GNU General Public License +Version 2 (GPL2) and the GNU General Public License Version 3 (GPL3). It is +your choice whether you apply the terms of version 2 or version 3. + +If you decide for the free GPL2 or GPL3, we STRONGLY ENCOURAGE you to do the +following things IN ADDITION to the obligations from the GPL: + +(1) Publish your entire project on a web site and drop us a note with the URL. +Use the form at http://www.obdev.at/vusb/feedback.html for your submission. +If you don't have a web site, you can publish the project in obdev's +documentation wiki at +http://www.obdev.at/goto.php?t=vusb-wiki&p=hosted-projects. + +(2) Adhere to minimum publication standards. Please include AT LEAST: + - a circuit diagram in PDF, PNG or GIF format + - full source code for the host software + - a Readme.txt file in ASCII format which describes the purpose of the + project and what can be found in which directories and which files + - a reference to http://www.obdev.at/vusb/ + +(3) If you improve the driver firmware itself, please give us a free license +to your modifications for our commercial license offerings. + + +COMMERCIAL LICENSES FOR V-USB +============================= +If you don't want to publish your source code under the terms of the GPL, +you can simply pay money for V-USB. As an additional benefit you get +USB PIDs for free, reserved exclusively to you. See the file +"CommercialLicense.txt" for details. + diff --git a/usbdrv/USB-ID-FAQ.txt b/usbdrv/USB-ID-FAQ.txt new file mode 100644 index 000000000..d1de8fb61 --- /dev/null +++ b/usbdrv/USB-ID-FAQ.txt @@ -0,0 +1,149 @@ +Version 2009-08-22 + +========================== +WHY DO WE NEED THESE IDs? +========================== + +USB is more than a low level protocol for data transport. It also defines a +common set of requests which must be understood by all devices. And as part +of these common requests, the specification defines data structures, the +USB Descriptors, which are used to describe the properties of the device. + +From the perspective of an operating system, it is therefore possible to find +out basic properties of a device (such as e.g. the manufacturer and the name +of the device) without a device-specific driver. This is essential because +the operating system can choose a driver to load based on this information +(Plug-And-Play). + +Among the most important properties in the Device Descriptor are the USB +Vendor- and Product-ID. Both are 16 bit integers. The most simple form of +driver matching is based on these IDs. The driver announces the Vendor- and +Product-IDs of the devices it can handle and the operating system loads the +appropriate driver when the device is connected. + +It is obvious that this technique only works if the pair Vendor- plus +Product-ID is unique: Only devices which require the same driver can have the +same pair of IDs. + + +===================================================== +HOW DOES THE USB STANDARD ENSURE THAT IDs ARE UNIQUE? +===================================================== + +Since it is so important that USB IDs are unique, the USB Implementers Forum, +Inc. (usb.org) needs a way to enforce this legally. It is not forbidden by +law to build a device and assign it any random numbers as IDs. Usb.org +therefore needs an agreement to regulate the use of USB IDs. The agreement +binds only parties who agreed to it, of course. Everybody else is free to use +any numbers for their IDs. + +So how can usb.org ensure that every manufacturer of USB devices enters into +an agreement with them? They do it via trademark licensing. Usb.org has +registered the trademark "USB", all associated logos and related terms. If +you want to put an USB logo on your product or claim that it is USB +compliant, you must license these trademarks from usb.org. And this is where +you enter into an agreement. See the "USB-IF Trademark License Agreement and +Usage Guidelines for the USB-IF Logo" at +http://www.usb.org/developers/logo_license/. + +Licensing the USB trademarks requires that you buy a USB Vendor-ID from +usb.org (one-time fee of ca. 2,000 USD), that you become a member of usb.org +(yearly fee of ca. 4,000 USD) and that you meet all the technical +specifications from the USB spec. + +This means that most hobbyists and small companies will never be able to +become USB compliant, just because membership is so expensive. And you can't +be compliant with a driver based on V-USB anyway, because the AVR's port pins +don't meet the electrical specifications for USB. So, in principle, all +hobbyists and small companies are free to choose any random numbers for their +IDs. They have nothing to lose... + +There is one exception worth noting, though: If you use a sub-component which +implements USB, the vendor of the sub-components may guarantee USB +compliance. This might apply to some or all of FTDI's solutions. + + +======================================================================= +WHY SHOULD YOU OBTAIN USB IDs EVEN IF YOU DON'T LICENSE USB TRADEMARKS? +======================================================================= + +You have learned in the previous section that you are free to choose any +numbers for your IDs anyway. So why not do exactly this? There is still the +technical issue. If you choose IDs which are already in use by somebody else, +operating systems will load the wrong drivers and your device won't work. +Even if you choose IDs which are not currently in use, they may be in use in +the next version of the operating system or even after an automatic update. + +So what you need is a pair of Vendor- and Product-IDs for which you have the +guarantee that no USB compliant product uses them. This implies that no +operating system will ever ship with drivers responsible for these IDs. + + +============================================== +HOW DOES OBJECTIVE DEVELOPMENT HANDLE USB IDs? +============================================== + +Objective Development gives away pairs of USB-IDs with their V-USB licenses. +In order to ensure that these IDs are unique, Objective Development has an +agreement with the company/person who has bought the USB Vendor-ID from +usb.org. This agreement ensures that a range of USB Product-IDs is reserved +for assignment by Objective Development and that the owner of the Vendor-ID +won't give it to anybody else. + +This means that you have to trust three parties to ensure uniqueness of +your IDs: + + - Objective Development, that they don't give the same PID to more than + one person. + - The owner of the Vendor-ID that they don't assign PIDs from the range + assigned to Objective Development to anybody else. + - Usb.org that they don't assign the same Vendor-ID a second time. + + +================================== +WHO IS THE OWNER OF THE VENDOR-ID? +================================== + +Objective Development has obtained ranges of USB Product-IDs under two +Vendor-IDs: Under Vendor-ID 5824 from Wouter van Ooijen (Van Ooijen +Technische Informatica, www.voti.nl) and under Vendor-ID 8352 from Jason +Kotzin (Clay Logic, www.claylogic.com). Both VID owners have received their +Vendor-ID directly from usb.org. + + +========================================================================= +CAN I USE USB-IDs FROM OBJECTIVE DEVELOPMENT WITH OTHER DRIVERS/HARDWARE? +========================================================================= + +The short answer is: Yes. All you get is a guarantee that the IDs are never +assigned to anybody else. What more do you need? + + +============================ +WHAT ABOUT SHARED ID PAIRS? +============================ + +Objective Development has reserved some PID/VID pairs for shared use. You +have no guarantee of uniqueness for them, except that no USB compliant device +uses them. In order to avoid technical problems, we must ensure that all +devices with the same pair of IDs use the same driver on kernel level. For +details, see the file USB-IDs-for-free.txt. + + +====================================================== +I HAVE HEARD THAT SUB-LICENSING OF USB-IDs IS ILLEGAL? +====================================================== + +A 16 bit integer number cannot be protected by copyright laws. It is not +sufficiently complex. And since none of the parties involved entered into the +USB-IF Trademark License Agreement, we are not bound by this agreement. So +there is no reason why it should be illegal to sub-license USB-IDs. + + +============================================= +WHO IS LIABLE IF THERE ARE INCOMPATIBILITIES? +============================================= + +Objective Development disclaims all liabilities which might arise from the +assignment of IDs. If you guarantee product features to your customers +without proper disclaimer, YOU are liable for that. diff --git a/usbdrv/USB-IDs-for-free.txt b/usbdrv/USB-IDs-for-free.txt new file mode 100644 index 000000000..2f4d59ad1 --- /dev/null +++ b/usbdrv/USB-IDs-for-free.txt @@ -0,0 +1,148 @@ +Version 2009-08-22 + +=========================== +FREE USB-IDs FOR SHARED USE +=========================== + +Objective Development has reserved a set of USB Product-IDs for use according +to the guidelines outlined below. For more information about the concept of +USB IDs please see the file USB-ID-FAQ.txt. Objective Development guarantees +that the IDs listed below are not used by any USB compliant devices. + + +==================== +MECHANISM OF SHARING +==================== + +From a technical point of view, two different devices can share the same USB +Vendor- and Product-ID if they require the same driver on operating system +level. We make use of this fact by assigning separate IDs for various device +classes. On application layer, devices must be distinguished by their textual +name or serial number. We offer separate sets of IDs for discrimination by +textual name and for serial number. + +Examples for shared use of USB IDs are included with V-USB in the "examples" +subdirectory. + + +====================================== +IDs FOR DISCRIMINATION BY TEXTUAL NAME +====================================== + +If you use one of the IDs listed below, your device and host-side software +must conform to these rules: + +(1) The USB device MUST provide a textual representation of the manufacturer +and product identification. The manufacturer identification MUST be available +at least in USB language 0x0409 (English/US). + +(2) The textual manufacturer identification MUST contain either an Internet +domain name (e.g. "mycompany.com") registered and owned by you, or an e-mail +address under your control (e.g. "myname@gmx.net"). You can embed the domain +name or e-mail address in any string you like, e.g. "Objective Development +http://www.obdev.at/vusb/". + +(3) You are responsible for retaining ownership of the domain or e-mail +address for as long as any of your products are in use. + +(4) You may choose any string for the textual product identification, as long +as this string is unique within the scope of your textual manufacturer +identification. + +(5) Application side device look-up MUST be based on the textual manufacturer +and product identification in addition to VID/PID matching. The driver +matching MUST be a comparison of the entire strings, NOT a sub-string match. + +(6) For devices which implement a particular USB device class (e.g. HID), the +operating system's default class driver MUST be used. If an operating system +driver for Vendor Class devices is needed, this driver must be libusb or +libusb-win32 (see http://libusb.org/ and +http://libusb-win32.sourceforge.net/). + +Table if IDs for discrimination by textual name: + +PID dec (hex) | VID dec (hex) | Description of use +==============+===============+============================================ +1500 (0x05dc) | 5824 (0x16c0) | For Vendor Class devices with libusb +--------------+---------------+-------------------------------------------- +1503 (0x05df) | 5824 (0x16c0) | For generic HID class devices (which are + | | NOT mice, keyboards or joysticks) +--------------+---------------+-------------------------------------------- +1505 (0x05e1) | 5824 (0x16c0) | For CDC-ACM class devices (modems) +--------------+---------------+-------------------------------------------- +1508 (0x05e4) | 5824 (0x16c0) | For MIDI class devices +--------------+---------------+-------------------------------------------- + +Note that Windows caches the textual product- and vendor-description for +mice, keyboards and joysticks. Name-bsed discrimination is therefore not +recommended for these device classes. + + +======================================= +IDs FOR DISCRIMINATION BY SERIAL NUMBER +======================================= + +If you use one of the IDs listed below, your device and host-side software +must conform to these rules: + +(1) The USB device MUST provide a textual representation of the serial +number. The serial number string MUST be available at least in USB language +0x0409 (English/US). + +(2) The serial number MUST start with either an Internet domain name (e.g. +"mycompany.com") registered and owned by you, or an e-mail address under your +control (e.g. "myname@gmx.net"), both terminated with a colon (":") character. +You MAY append any string you like for further discrimination of your devices. + +(3) You are responsible for retaining ownership of the domain or e-mail +address for as long as any of your products are in use. + +(5) Application side device look-up MUST be based on the serial number string +in addition to VID/PID matching. The matching must start at the first +character of the serial number string and include the colon character +terminating your domain or e-mail address. It MAY stop anywhere after that. + +(6) For devices which implement a particular USB device class (e.g. HID), the +operating system's default class driver MUST be used. If an operating system +driver for Vendor Class devices is needed, this driver must be libusb or +libusb-win32 (see http://libusb.org/ and +http://libusb-win32.sourceforge.net/). + +Table if IDs for discrimination by serial number string: + +PID dec (hex) | VID dec (hex) | Description of use +===============+===============+=========================================== +10200 (0x27d8) | 5824 (0x16c0) | For Vendor Class devices with libusb +---------------+---------------+------------------------------------------- +10201 (0x27d9) | 5824 (0x16c0) | For generic HID class devices (which are + | | NOT mice, keyboards or joysticks) +---------------+---------------+------------------------------------------- +10202 (0x27da) | 5824 (0x16c0) | For USB Mice +---------------+---------------+------------------------------------------- +10203 (0x27db) | 5824 (0x16c0) | For USB Keyboards +---------------+---------------+------------------------------------------- +10204 (0x27db) | 5824 (0x16c0) | For USB Joysticks +---------------+---------------+------------------------------------------- +10205 (0x27dc) | 5824 (0x16c0) | For CDC-ACM class devices (modems) +---------------+---------------+------------------------------------------- +10206 (0x27dd) | 5824 (0x16c0) | For MIDI class devices +---------------+---------------+------------------------------------------- + + +================= +ORIGIN OF USB-IDs +================= + +OBJECTIVE DEVELOPMENT Software GmbH has obtained all VID/PID pairs listed +here from Wouter van Ooijen (see www.voti.nl) for exclusive disposition. +Wouter van Ooijen has obtained the VID from the USB Implementers Forum, Inc. +(see www.usb.org). The VID is registered for the company name "Van Ooijen +Technische Informatica". + + +========== +DISCLAIMER +========== + +OBJECTIVE DEVELOPMENT Software GmbH disclaims all liability for any +problems which are caused by the shared use of these VID/PID pairs. diff --git a/usbdrv/asmcommon.inc b/usbdrv/asmcommon.inc new file mode 100644 index 000000000..07d692be3 --- /dev/null +++ b/usbdrv/asmcommon.inc @@ -0,0 +1,188 @@ +/* Name: asmcommon.inc + * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers + * Author: Christian Starkjohann + * Creation Date: 2007-11-05 + * Tabsize: 4 + * Copyright: (c) 2007 by OBJECTIVE DEVELOPMENT Software GmbH + * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) + * Revision: $Id$ + */ + +/* Do not link this file! Link usbdrvasm.S instead, which includes the + * appropriate implementation! + */ + +/* +General Description: +This file contains assembler code which is shared among the USB driver +implementations for different CPU cocks. Since the code must be inserted +in the middle of the module, it's split out into this file and #included. + +Jump destinations called from outside: + sofError: Called when no start sequence was found. + se0: Called when a package has been successfully received. + overflow: Called when receive buffer overflows. + doReturn: Called after sending data. + +Outside jump destinations used by this module: + waitForJ: Called to receive an already arriving packet. + sendAckAndReti: + sendNakAndReti: + sendCntAndReti: + usbSendAndReti: + +The following macros must be defined before this file is included: + .macro POP_STANDARD + .endm + .macro POP_RETI + .endm +*/ + +#define token x1 + +overflow: + ldi x2, 1< 0 + +#warning "Never compile production devices with debugging enabled" + +static void uartPutc(char c) +{ + while(!(ODDBG_USR & (1 << ODDBG_UDRE))); /* wait for data register empty */ + ODDBG_UDR = c; +} + +static uchar hexAscii(uchar h) +{ + h &= 0xf; + if(h >= 10) + h += 'a' - (uchar)10 - '0'; + h += '0'; + return h; +} + +static void printHex(uchar c) +{ + uartPutc(hexAscii(c >> 4)); + uartPutc(hexAscii(c)); +} + +void odDebug(uchar prefix, uchar *data, uchar len) +{ + printHex(prefix); + uartPutc(':'); + while(len--){ + uartPutc(' '); + printHex(*data++); + } + uartPutc('\r'); + uartPutc('\n'); +} + +#endif diff --git a/usbdrv/oddebug.h b/usbdrv/oddebug.h new file mode 100644 index 000000000..d61309daa --- /dev/null +++ b/usbdrv/oddebug.h @@ -0,0 +1,123 @@ +/* Name: oddebug.h + * Project: AVR library + * Author: Christian Starkjohann + * Creation Date: 2005-01-16 + * Tabsize: 4 + * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH + * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) + * This Revision: $Id: oddebug.h 692 2008-11-07 15:07:40Z cs $ + */ + +#ifndef __oddebug_h_included__ +#define __oddebug_h_included__ + +/* +General Description: +This module implements a function for debug logs on the serial line of the +AVR microcontroller. Debugging can be configured with the define +'DEBUG_LEVEL'. If this macro is not defined or defined to 0, all debugging +calls are no-ops. If it is 1, DBG1 logs will appear, but not DBG2. If it is +2, DBG1 and DBG2 logs will be printed. + +A debug log consists of a label ('prefix') to indicate which debug log created +the output and a memory block to dump in hex ('data' and 'len'). +*/ + + +#ifndef F_CPU +# define F_CPU 12000000 /* 12 MHz */ +#endif + +/* make sure we have the UART defines: */ +#include "usbportability.h" + +#ifndef uchar +# define uchar unsigned char +#endif + +#if DEBUG_LEVEL > 0 && !(defined TXEN || defined TXEN0) /* no UART in device */ +# warning "Debugging disabled because device has no UART" +# undef DEBUG_LEVEL +#endif + +#ifndef DEBUG_LEVEL +# define DEBUG_LEVEL 0 +#endif + +/* ------------------------------------------------------------------------- */ + +#if DEBUG_LEVEL > 0 +# define DBG1(prefix, data, len) odDebug(prefix, data, len) +#else +# define DBG1(prefix, data, len) +#endif + +#if DEBUG_LEVEL > 1 +# define DBG2(prefix, data, len) odDebug(prefix, data, len) +#else +# define DBG2(prefix, data, len) +#endif + +/* ------------------------------------------------------------------------- */ + +#if DEBUG_LEVEL > 0 +extern void odDebug(uchar prefix, uchar *data, uchar len); + +/* Try to find our control registers; ATMEL likes to rename these */ + +#if defined UBRR +# define ODDBG_UBRR UBRR +#elif defined UBRRL +# define ODDBG_UBRR UBRRL +#elif defined UBRR0 +# define ODDBG_UBRR UBRR0 +#elif defined UBRR0L +# define ODDBG_UBRR UBRR0L +#endif + +#if defined UCR +# define ODDBG_UCR UCR +#elif defined UCSRB +# define ODDBG_UCR UCSRB +#elif defined UCSR0B +# define ODDBG_UCR UCSR0B +#endif + +#if defined TXEN +# define ODDBG_TXEN TXEN +#else +# define ODDBG_TXEN TXEN0 +#endif + +#if defined USR +# define ODDBG_USR USR +#elif defined UCSRA +# define ODDBG_USR UCSRA +#elif defined UCSR0A +# define ODDBG_USR UCSR0A +#endif + +#if defined UDRE +# define ODDBG_UDRE UDRE +#else +# define ODDBG_UDRE UDRE0 +#endif + +#if defined UDR +# define ODDBG_UDR UDR +#elif defined UDR0 +# define ODDBG_UDR UDR0 +#endif + +static inline void odDebugInit(void) +{ + ODDBG_UCR |= (1<len & 0x10){ /* packet buffer was empty */ + txStatus->buffer[0] ^= USBPID_DATA0 ^ USBPID_DATA1; /* toggle token */ + }else{ + txStatus->len = USBPID_NAK; /* avoid sending outdated (overwritten) interrupt data */ + } + p = txStatus->buffer + 1; + i = len; + do{ /* if len == 0, we still copy 1 byte, but that's no problem */ + *p++ = *data++; + }while(--i > 0); /* loop control at the end is 2 bytes shorter than at beginning */ + usbCrc16Append(&txStatus->buffer[1], len); + txStatus->len = len + 4; /* len must be given including sync byte */ + DBG2(0x21 + (((int)txStatus >> 3) & 3), txStatus->buffer, len + 3); +} + +USB_PUBLIC void usbSetInterrupt(uchar *data, uchar len) +{ + usbGenericSetInterrupt(data, len, &usbTxStatus1); +} +#endif + +#if USB_CFG_HAVE_INTRIN_ENDPOINT3 +USB_PUBLIC void usbSetInterrupt3(uchar *data, uchar len) +{ + usbGenericSetInterrupt(data, len, &usbTxStatus3); +} +#endif +#endif /* USB_CFG_SUPPRESS_INTR_CODE */ + +/* ------------------ utilities for code following below ------------------- */ + +/* Use defines for the switch statement so that we can choose between an + * if()else if() and a switch/case based implementation. switch() is more + * efficient for a LARGE set of sequential choices, if() is better in all other + * cases. + */ +#if USB_CFG_USE_SWITCH_STATEMENT +# define SWITCH_START(cmd) switch(cmd){{ +# define SWITCH_CASE(value) }break; case (value):{ +# define SWITCH_CASE2(v1,v2) }break; case (v1): case(v2):{ +# define SWITCH_CASE3(v1,v2,v3) }break; case (v1): case(v2): case(v3):{ +# define SWITCH_DEFAULT }break; default:{ +# define SWITCH_END }} +#else +# define SWITCH_START(cmd) {uchar _cmd = cmd; if(0){ +# define SWITCH_CASE(value) }else if(_cmd == (value)){ +# define SWITCH_CASE2(v1,v2) }else if(_cmd == (v1) || _cmd == (v2)){ +# define SWITCH_CASE3(v1,v2,v3) }else if(_cmd == (v1) || _cmd == (v2) || (_cmd == v3)){ +# define SWITCH_DEFAULT }else{ +# define SWITCH_END }} +#endif + +#ifndef USB_RX_USER_HOOK +#define USB_RX_USER_HOOK(data, len) +#endif +#ifndef USB_SET_ADDRESS_HOOK +#define USB_SET_ADDRESS_HOOK() +#endif + +/* ------------------------------------------------------------------------- */ + +/* We use if() instead of #if in the macro below because #if can't be used + * in macros and the compiler optimizes constant conditions anyway. + * This may cause problems with undefined symbols if compiled without + * optimizing! + */ +#define GET_DESCRIPTOR(cfgProp, staticName) \ + if(cfgProp){ \ + if((cfgProp) & USB_PROP_IS_RAM) \ + flags = 0; \ + if((cfgProp) & USB_PROP_IS_DYNAMIC){ \ + len = usbFunctionDescriptor(rq); \ + }else{ \ + len = USB_PROP_LENGTH(cfgProp); \ + usbMsgPtr = (uchar *)(staticName); \ + } \ + } + +/* usbDriverDescriptor() is similar to usbFunctionDescriptor(), but used + * internally for all types of descriptors. + */ +static inline usbMsgLen_t usbDriverDescriptor(usbRequest_t *rq) +{ +usbMsgLen_t len = 0; +uchar flags = USB_FLG_MSGPTR_IS_ROM; + + SWITCH_START(rq->wValue.bytes[1]) + SWITCH_CASE(USBDESCR_DEVICE) /* 1 */ + GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_DEVICE, usbDescriptorDevice) + SWITCH_CASE(USBDESCR_CONFIG) /* 2 */ + GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_CONFIGURATION, usbDescriptorConfiguration) + SWITCH_CASE(USBDESCR_STRING) /* 3 */ +#if USB_CFG_DESCR_PROPS_STRINGS & USB_PROP_IS_DYNAMIC + if(USB_CFG_DESCR_PROPS_STRINGS & USB_PROP_IS_RAM) + flags = 0; + len = usbFunctionDescriptor(rq); +#else /* USB_CFG_DESCR_PROPS_STRINGS & USB_PROP_IS_DYNAMIC */ + SWITCH_START(rq->wValue.bytes[0]) + SWITCH_CASE(0) + GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_STRING_0, usbDescriptorString0) + SWITCH_CASE(1) + GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_STRING_VENDOR, usbDescriptorStringVendor) + SWITCH_CASE(2) + GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_STRING_PRODUCT, usbDescriptorStringDevice) + SWITCH_CASE(3) + GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER, usbDescriptorStringSerialNumber) + SWITCH_DEFAULT + if(USB_CFG_DESCR_PROPS_UNKNOWN & USB_PROP_IS_DYNAMIC){ + len = usbFunctionDescriptor(rq); + } + SWITCH_END +#endif /* USB_CFG_DESCR_PROPS_STRINGS & USB_PROP_IS_DYNAMIC */ +#if USB_CFG_DESCR_PROPS_HID_REPORT /* only support HID descriptors if enabled */ + SWITCH_CASE(USBDESCR_HID) /* 0x21 */ + GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_HID, usbDescriptorConfiguration + 18) + SWITCH_CASE(USBDESCR_HID_REPORT)/* 0x22 */ + GET_DESCRIPTOR(USB_CFG_DESCR_PROPS_HID_REPORT, usbDescriptorHidReport) +#endif + SWITCH_DEFAULT + if(USB_CFG_DESCR_PROPS_UNKNOWN & USB_PROP_IS_DYNAMIC){ + len = usbFunctionDescriptor(rq); + } + SWITCH_END + usbMsgFlags = flags; + return len; +} + +/* ------------------------------------------------------------------------- */ + +/* usbDriverSetup() is similar to usbFunctionSetup(), but it's used for + * standard requests instead of class and custom requests. + */ +static inline usbMsgLen_t usbDriverSetup(usbRequest_t *rq) +{ +uchar len = 0, *dataPtr = usbTxBuf + 9; /* there are 2 bytes free space at the end of the buffer */ +uchar value = rq->wValue.bytes[0]; +#if USB_CFG_IMPLEMENT_HALT +uchar index = rq->wIndex.bytes[0]; +#endif + + dataPtr[0] = 0; /* default reply common to USBRQ_GET_STATUS and USBRQ_GET_INTERFACE */ + SWITCH_START(rq->bRequest) + SWITCH_CASE(USBRQ_GET_STATUS) /* 0 */ + uchar recipient = rq->bmRequestType & USBRQ_RCPT_MASK; /* assign arith ops to variables to enforce byte size */ + if(USB_CFG_IS_SELF_POWERED && recipient == USBRQ_RCPT_DEVICE) + dataPtr[0] = USB_CFG_IS_SELF_POWERED; +#if USB_CFG_IMPLEMENT_HALT + if(recipient == USBRQ_RCPT_ENDPOINT && index == 0x81) /* request status for endpoint 1 */ + dataPtr[0] = usbTxLen1 == USBPID_STALL; +#endif + dataPtr[1] = 0; + len = 2; +#if USB_CFG_IMPLEMENT_HALT + SWITCH_CASE2(USBRQ_CLEAR_FEATURE, USBRQ_SET_FEATURE) /* 1, 3 */ + if(value == 0 && index == 0x81){ /* feature 0 == HALT for endpoint == 1 */ + usbTxLen1 = rq->bRequest == USBRQ_CLEAR_FEATURE ? USBPID_NAK : USBPID_STALL; + usbResetDataToggling(); + } +#endif + SWITCH_CASE(USBRQ_SET_ADDRESS) /* 5 */ + usbNewDeviceAddr = value; + USB_SET_ADDRESS_HOOK(); + SWITCH_CASE(USBRQ_GET_DESCRIPTOR) /* 6 */ + len = usbDriverDescriptor(rq); + goto skipMsgPtrAssignment; + SWITCH_CASE(USBRQ_GET_CONFIGURATION) /* 8 */ + dataPtr = &usbConfiguration; /* send current configuration value */ + len = 1; + SWITCH_CASE(USBRQ_SET_CONFIGURATION) /* 9 */ + usbConfiguration = value; + usbResetStall(); + SWITCH_CASE(USBRQ_GET_INTERFACE) /* 10 */ + len = 1; +#if USB_CFG_HAVE_INTRIN_ENDPOINT && !USB_CFG_SUPPRESS_INTR_CODE + SWITCH_CASE(USBRQ_SET_INTERFACE) /* 11 */ + usbResetDataToggling(); + usbResetStall(); +#endif + SWITCH_DEFAULT /* 7=SET_DESCRIPTOR, 12=SYNC_FRAME */ + /* Should we add an optional hook here? */ + SWITCH_END + usbMsgPtr = dataPtr; +skipMsgPtrAssignment: + return len; +} + +/* ------------------------------------------------------------------------- */ + +/* usbProcessRx() is called for every message received by the interrupt + * routine. It distinguishes between SETUP and DATA packets and processes + * them accordingly. + */ +static inline void usbProcessRx(uchar *data, uchar len) +{ +usbRequest_t *rq = (void *)data; + +/* usbRxToken can be: + * 0x2d 00101101 (USBPID_SETUP for setup data) + * 0xe1 11100001 (USBPID_OUT: data phase of setup transfer) + * 0...0x0f for OUT on endpoint X + */ + DBG2(0x10 + (usbRxToken & 0xf), data, len + 2); /* SETUP=1d, SETUP-DATA=11, OUTx=1x */ + USB_RX_USER_HOOK(data, len) +#if USB_CFG_IMPLEMENT_FN_WRITEOUT + if(usbRxToken < 0x10){ /* OUT to endpoint != 0: endpoint number in usbRxToken */ + usbFunctionWriteOut(data, len); + return; + } +#endif + if(usbRxToken == (uchar)USBPID_SETUP){ + if(len != 8) /* Setup size must be always 8 bytes. Ignore otherwise. */ + return; + usbMsgLen_t replyLen; + usbTxBuf[0] = USBPID_DATA0; /* initialize data toggling */ + usbTxLen = USBPID_NAK; /* abort pending transmit */ + usbMsgFlags = 0; + uchar type = rq->bmRequestType & USBRQ_TYPE_MASK; + if(type != USBRQ_TYPE_STANDARD){ /* standard requests are handled by driver */ + replyLen = usbFunctionSetup(data); + }else{ + replyLen = usbDriverSetup(rq); + } +#if USB_CFG_IMPLEMENT_FN_READ || USB_CFG_IMPLEMENT_FN_WRITE + if(replyLen == USB_NO_MSG){ /* use user-supplied read/write function */ + /* do some conditioning on replyLen, but on IN transfers only */ + if((rq->bmRequestType & USBRQ_DIR_MASK) != USBRQ_DIR_HOST_TO_DEVICE){ + if(sizeof(replyLen) < sizeof(rq->wLength.word)){ /* help compiler with optimizing */ + replyLen = rq->wLength.bytes[0]; + }else{ + replyLen = rq->wLength.word; + } + } + usbMsgFlags = USB_FLG_USE_USER_RW; + }else /* The 'else' prevents that we limit a replyLen of USB_NO_MSG to the maximum transfer len. */ +#endif + if(sizeof(replyLen) < sizeof(rq->wLength.word)){ /* help compiler with optimizing */ + if(!rq->wLength.bytes[1] && replyLen > rq->wLength.bytes[0]) /* limit length to max */ + replyLen = rq->wLength.bytes[0]; + }else{ + if(replyLen > rq->wLength.word) /* limit length to max */ + replyLen = rq->wLength.word; + } + usbMsgLen = replyLen; + }else{ /* usbRxToken must be USBPID_OUT, which means data phase of setup (control-out) */ +#if USB_CFG_IMPLEMENT_FN_WRITE + if(usbMsgFlags & USB_FLG_USE_USER_RW){ + uchar rval = usbFunctionWrite(data, len); + if(rval == 0xff){ /* an error occurred */ + usbTxLen = USBPID_STALL; + }else if(rval != 0){ /* This was the final package */ + usbMsgLen = 0; /* answer with a zero-sized data packet */ + } + } +#endif + } +} + +/* ------------------------------------------------------------------------- */ + +/* This function is similar to usbFunctionRead(), but it's also called for + * data handled automatically by the driver (e.g. descriptor reads). + */ +static uchar usbDeviceRead(uchar *data, uchar len) +{ + if(len > 0){ /* don't bother app with 0 sized reads */ +#if USB_CFG_IMPLEMENT_FN_READ + if(usbMsgFlags & USB_FLG_USE_USER_RW){ + len = usbFunctionRead(data, len); + }else +#endif + { + uchar i = len, *r = usbMsgPtr; + if(usbMsgFlags & USB_FLG_MSGPTR_IS_ROM){ /* ROM data */ + do{ + uchar c = USB_READ_FLASH(r); /* assign to char size variable to enforce byte ops */ + *data++ = c; + r++; + }while(--i); + }else{ /* RAM data */ + do{ + *data++ = *r++; + }while(--i); + } + usbMsgPtr = r; + } + } + return len; +} + +/* ------------------------------------------------------------------------- */ + +/* usbBuildTxBlock() is called when we have data to transmit and the + * interrupt routine's transmit buffer is empty. + */ +static inline void usbBuildTxBlock(void) +{ +usbMsgLen_t wantLen; +uchar len; + + wantLen = usbMsgLen; + if(wantLen > 8) + wantLen = 8; + usbMsgLen -= wantLen; + usbTxBuf[0] ^= USBPID_DATA0 ^ USBPID_DATA1; /* DATA toggling */ + len = usbDeviceRead(usbTxBuf + 1, wantLen); + if(len <= 8){ /* valid data packet */ + usbCrc16Append(&usbTxBuf[1], len); + len += 4; /* length including sync byte */ + if(len < 12) /* a partial package identifies end of message */ + usbMsgLen = USB_NO_MSG; + }else{ + len = USBPID_STALL; /* stall the endpoint */ + usbMsgLen = USB_NO_MSG; + } + usbTxLen = len; + DBG2(0x20, usbTxBuf, len-1); +} + +/* ------------------------------------------------------------------------- */ + +static inline void usbHandleResetHook(uchar notResetState) +{ +#ifdef USB_RESET_HOOK +static uchar wasReset; +uchar isReset = !notResetState; + + if(wasReset != isReset){ + USB_RESET_HOOK(isReset); + wasReset = isReset; + } +#endif +} + +/* ------------------------------------------------------------------------- */ + +USB_PUBLIC void usbPoll(void) +{ +schar len; +uchar i; + + len = usbRxLen - 3; + if(len >= 0){ +/* We could check CRC16 here -- but ACK has already been sent anyway. If you + * need data integrity checks with this driver, check the CRC in your app + * code and report errors back to the host. Since the ACK was already sent, + * retries must be handled on application level. + * unsigned crc = usbCrc16(buffer + 1, usbRxLen - 3); + */ + usbProcessRx(usbRxBuf + USB_BUFSIZE + 1 - usbInputBufOffset, len); +#if USB_CFG_HAVE_FLOWCONTROL + if(usbRxLen > 0) /* only mark as available if not inactivated */ + usbRxLen = 0; +#else + usbRxLen = 0; /* mark rx buffer as available */ +#endif + } + if(usbTxLen & 0x10){ /* transmit system idle */ + if(usbMsgLen != USB_NO_MSG){ /* transmit data pending? */ + usbBuildTxBlock(); + } + } + for(i = 20; i > 0; i--){ + uchar usbLineStatus = USBIN & USBMASK; + if(usbLineStatus != 0) /* SE0 has ended */ + goto isNotReset; + } + /* RESET condition, called multiple times during reset */ + usbNewDeviceAddr = 0; + usbDeviceAddr = 0; + usbResetStall(); + DBG1(0xff, 0, 0); +isNotReset: + usbHandleResetHook(i); +} + +/* ------------------------------------------------------------------------- */ + +USB_PUBLIC void usbInit(void) +{ +#if USB_INTR_CFG_SET != 0 + USB_INTR_CFG |= USB_INTR_CFG_SET; +#endif +#if USB_INTR_CFG_CLR != 0 + USB_INTR_CFG &= ~(USB_INTR_CFG_CLR); +#endif + USB_INTR_ENABLE |= (1 << USB_INTR_ENABLE_BIT); + usbResetDataToggling(); +#if USB_CFG_HAVE_INTRIN_ENDPOINT && !USB_CFG_SUPPRESS_INTR_CODE + usbTxLen1 = USBPID_NAK; +#if USB_CFG_HAVE_INTRIN_ENDPOINT3 + usbTxLen3 = USBPID_NAK; +#endif +#endif +} + +/* ------------------------------------------------------------------------- */ diff --git a/usbdrv/usbdrv.h b/usbdrv/usbdrv.h new file mode 100644 index 000000000..3a78f307b --- /dev/null +++ b/usbdrv/usbdrv.h @@ -0,0 +1,735 @@ +/* Name: usbdrv.h + * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers + * Author: Christian Starkjohann + * Creation Date: 2004-12-29 + * Tabsize: 4 + * Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH + * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) + * This Revision: $Id: usbdrv.h 793 2010-07-15 15:58:11Z cs $ + */ + +#ifndef __usbdrv_h_included__ +#define __usbdrv_h_included__ +#include "usbconfig.h" +#include "usbportability.h" + +/* +Hardware Prerequisites: +======================= +USB lines D+ and D- MUST be wired to the same I/O port. We recommend that D+ +triggers the interrupt (best achieved by using INT0 for D+), but it is also +possible to trigger the interrupt from D-. If D- is used, interrupts are also +triggered by SOF packets. D- requires a pull-up of 1.5k to +3.5V (and the +device must be powered at 3.5V) to identify as low-speed USB device. A +pull-down or pull-up of 1M SHOULD be connected from D+ to +3.5V to prevent +interference when no USB master is connected. If you use Zener diodes to limit +the voltage on D+ and D-, you MUST use a pull-down resistor, not a pull-up. +We use D+ as interrupt source and not D- because it does not trigger on +keep-alive and RESET states. If you want to count keep-alive events with +USB_COUNT_SOF, you MUST use D- as an interrupt source. + +As a compile time option, the 1.5k pull-up resistor on D- can be made +switchable to allow the device to disconnect at will. See the definition of +usbDeviceConnect() and usbDeviceDisconnect() further down in this file. + +Please adapt the values in usbconfig.h according to your hardware! + +The device MUST be clocked at exactly 12 MHz, 15 MHz, 16 MHz or 20 MHz +or at 12.8 MHz resp. 16.5 MHz +/- 1%. See usbconfig-prototype.h for details. + + +Limitations: +============ +Robustness with respect to communication errors: +The driver assumes error-free communication. It DOES check for errors in +the PID, but does NOT check bit stuffing errors, SE0 in middle of a byte, +token CRC (5 bit) and data CRC (16 bit). CRC checks can not be performed due +to timing constraints: We must start sending a reply within 7 bit times. +Bit stuffing and misplaced SE0 would have to be checked in real-time, but CPU +performance does not permit that. The driver does not check Data0/Data1 +toggling, but application software can implement the check. + +Input characteristics: +Since no differential receiver circuit is used, electrical interference +robustness may suffer. The driver samples only one of the data lines with +an ordinary I/O pin's input characteristics. However, since this is only a +low speed USB implementation and the specification allows for 8 times the +bit rate over the same hardware, we should be on the safe side. Even the spec +requires detection of asymmetric states at high bit rate for SE0 detection. + +Number of endpoints: +The driver supports the following endpoints: + +- Endpoint 0, the default control endpoint. +- Any number of interrupt- or bulk-out endpoints. The data is sent to + usbFunctionWriteOut() and USB_CFG_IMPLEMENT_FN_WRITEOUT must be defined + to 1 to activate this feature. The endpoint number can be found in the + global variable 'usbRxToken'. +- One default interrupt- or bulk-in endpoint. This endpoint is used for + interrupt- or bulk-in transfers which are not handled by any other endpoint. + You must define USB_CFG_HAVE_INTRIN_ENDPOINT in order to activate this + feature and call usbSetInterrupt() to send interrupt/bulk data. +- One additional interrupt- or bulk-in endpoint. This was endpoint 3 in + previous versions of this driver but can now be configured to any endpoint + number. You must define USB_CFG_HAVE_INTRIN_ENDPOINT3 in order to activate + this feature and call usbSetInterrupt3() to send interrupt/bulk data. The + endpoint number can be set with USB_CFG_EP3_NUMBER. + +Please note that the USB standard forbids bulk endpoints for low speed devices! +Most operating systems allow them anyway, but the AVR will spend 90% of the CPU +time in the USB interrupt polling for bulk data. + +Maximum data payload: +Data payload of control in and out transfers may be up to 254 bytes. In order +to accept payload data of out transfers, you need to implement +'usbFunctionWrite()'. + +USB Suspend Mode supply current: +The USB standard limits power consumption to 500uA when the bus is in suspend +mode. This is not a problem for self-powered devices since they don't need +bus power anyway. Bus-powered devices can achieve this only by putting the +CPU in sleep mode. The driver does not implement suspend handling by itself. +However, the application may implement activity monitoring and wakeup from +sleep. The host sends regular SE0 states on the bus to keep it active. These +SE0 states can be detected by using D- as the interrupt source. Define +USB_COUNT_SOF to 1 and use the global variable usbSofCount to check for bus +activity. + +Operation without an USB master: +The driver behaves neutral without connection to an USB master if D- reads +as 1. To avoid spurious interrupts, we recommend a high impedance (e.g. 1M) +pull-down or pull-up resistor on D+ (interrupt). If Zener diodes are used, +use a pull-down. If D- becomes statically 0, the driver may block in the +interrupt routine. + +Interrupt latency: +The application must ensure that the USB interrupt is not disabled for more +than 25 cycles (this is for 12 MHz, faster clocks allow longer latency). +This implies that all interrupt routines must either have the "ISR_NOBLOCK" +attribute set (see "avr/interrupt.h") or be written in assembler with "sei" +as the first instruction. + +Maximum interrupt duration / CPU cycle consumption: +The driver handles all USB communication during the interrupt service +routine. The routine will not return before an entire USB message is received +and the reply is sent. This may be up to ca. 1200 cycles @ 12 MHz (= 100us) if +the host conforms to the standard. The driver will consume CPU cycles for all +USB messages, even if they address another (low-speed) device on the same bus. + +*/ + +/* ------------------------------------------------------------------------- */ +/* --------------------------- Module Interface ---------------------------- */ +/* ------------------------------------------------------------------------- */ + +#define USBDRV_VERSION 20100715 +/* This define uniquely identifies a driver version. It is a decimal number + * constructed from the driver's release date in the form YYYYMMDD. If the + * driver's behavior or interface changes, you can use this constant to + * distinguish versions. If it is not defined, the driver's release date is + * older than 2006-01-25. + */ + + +#ifndef USB_PUBLIC +#define USB_PUBLIC +#endif +/* USB_PUBLIC is used as declaration attribute for all functions exported by + * the USB driver. The default is no attribute (see above). You may define it + * to static either in usbconfig.h or from the command line if you include + * usbdrv.c instead of linking against it. Including the C module of the driver + * directly in your code saves a couple of bytes in flash memory. + */ + +#ifndef __ASSEMBLER__ +#ifndef uchar +#define uchar unsigned char +#endif +#ifndef schar +#define schar signed char +#endif +/* shortcuts for well defined 8 bit integer types */ + +#if USB_CFG_LONG_TRANSFERS /* if more than 254 bytes transfer size required */ +# define usbMsgLen_t unsigned +#else +# define usbMsgLen_t uchar +#endif +/* usbMsgLen_t is the data type used for transfer lengths. By default, it is + * defined to uchar, allowing a maximum of 254 bytes (255 is reserved for + * USB_NO_MSG below). If the usbconfig.h defines USB_CFG_LONG_TRANSFERS to 1, + * a 16 bit data type is used, allowing up to 16384 bytes (the rest is used + * for flags in the descriptor configuration). + */ +#define USB_NO_MSG ((usbMsgLen_t)-1) /* constant meaning "no message" */ + +struct usbRequest; /* forward declaration */ + +USB_PUBLIC void usbInit(void); +/* This function must be called before interrupts are enabled and the main + * loop is entered. We exepct that the PORT and DDR bits for D+ and D- have + * not been changed from their default status (which is 0). If you have changed + * them, set both back to 0 (configure them as input with no internal pull-up). + */ +USB_PUBLIC void usbPoll(void); +/* This function must be called at regular intervals from the main loop. + * Maximum delay between calls is somewhat less than 50ms (USB timeout for + * accepting a Setup message). Otherwise the device will not be recognized. + * Please note that debug outputs through the UART take ~ 0.5ms per byte + * at 19200 bps. + */ +extern uchar *usbMsgPtr; +/* This variable may be used to pass transmit data to the driver from the + * implementation of usbFunctionWrite(). It is also used internally by the + * driver for standard control requests. + */ +USB_PUBLIC usbMsgLen_t usbFunctionSetup(uchar data[8]); +/* This function is called when the driver receives a SETUP transaction from + * the host which is not answered by the driver itself (in practice: class and + * vendor requests). All control transfers start with a SETUP transaction where + * the host communicates the parameters of the following (optional) data + * transfer. The SETUP data is available in the 'data' parameter which can + * (and should) be casted to 'usbRequest_t *' for a more user-friendly access + * to parameters. + * + * If the SETUP indicates a control-in transfer, you should provide the + * requested data to the driver. There are two ways to transfer this data: + * (1) Set the global pointer 'usbMsgPtr' to the base of the static RAM data + * block and return the length of the data in 'usbFunctionSetup()'. The driver + * will handle the rest. Or (2) return USB_NO_MSG in 'usbFunctionSetup()'. The + * driver will then call 'usbFunctionRead()' when data is needed. See the + * documentation for usbFunctionRead() for details. + * + * If the SETUP indicates a control-out transfer, the only way to receive the + * data from the host is through the 'usbFunctionWrite()' call. If you + * implement this function, you must return USB_NO_MSG in 'usbFunctionSetup()' + * to indicate that 'usbFunctionWrite()' should be used. See the documentation + * of this function for more information. If you just want to ignore the data + * sent by the host, return 0 in 'usbFunctionSetup()'. + * + * Note that calls to the functions usbFunctionRead() and usbFunctionWrite() + * are only done if enabled by the configuration in usbconfig.h. + */ +USB_PUBLIC usbMsgLen_t usbFunctionDescriptor(struct usbRequest *rq); +/* You need to implement this function ONLY if you provide USB descriptors at + * runtime (which is an expert feature). It is very similar to + * usbFunctionSetup() above, but it is called only to request USB descriptor + * data. See the documentation of usbFunctionSetup() above for more info. + */ +#if USB_CFG_HAVE_INTRIN_ENDPOINT +USB_PUBLIC void usbSetInterrupt(uchar *data, uchar len); +/* This function sets the message which will be sent during the next interrupt + * IN transfer. The message is copied to an internal buffer and must not exceed + * a length of 8 bytes. The message may be 0 bytes long just to indicate the + * interrupt status to the host. + * If you need to transfer more bytes, use a control read after the interrupt. + */ +#define usbInterruptIsReady() (usbTxLen1 & 0x10) +/* This macro indicates whether the last interrupt message has already been + * sent. If you set a new interrupt message before the old was sent, the + * message already buffered will be lost. + */ +#if USB_CFG_HAVE_INTRIN_ENDPOINT3 +USB_PUBLIC void usbSetInterrupt3(uchar *data, uchar len); +#define usbInterruptIsReady3() (usbTxLen3 & 0x10) +/* Same as above for endpoint 3 */ +#endif +#endif /* USB_CFG_HAVE_INTRIN_ENDPOINT */ +#if USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH /* simplified interface for backward compatibility */ +#define usbHidReportDescriptor usbDescriptorHidReport +/* should be declared as: PROGMEM char usbHidReportDescriptor[]; */ +/* If you implement an HID device, you need to provide a report descriptor. + * The HID report descriptor syntax is a bit complex. If you understand how + * report descriptors are constructed, we recommend that you use the HID + * Descriptor Tool from usb.org, see http://www.usb.org/developers/hidpage/. + * Otherwise you should probably start with a working example. + */ +#endif /* USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH */ +#if USB_CFG_IMPLEMENT_FN_WRITE +USB_PUBLIC uchar usbFunctionWrite(uchar *data, uchar len); +/* This function is called by the driver to provide a control transfer's + * payload data (control-out). It is called in chunks of up to 8 bytes. The + * total count provided in the current control transfer can be obtained from + * the 'length' property in the setup data. If an error occurred during + * processing, return 0xff (== -1). The driver will answer the entire transfer + * with a STALL token in this case. If you have received the entire payload + * successfully, return 1. If you expect more data, return 0. If you don't + * know whether the host will send more data (you should know, the total is + * provided in the usbFunctionSetup() call!), return 1. + * NOTE: If you return 0xff for STALL, 'usbFunctionWrite()' may still be called + * for the remaining data. You must continue to return 0xff for STALL in these + * calls. + * In order to get usbFunctionWrite() called, define USB_CFG_IMPLEMENT_FN_WRITE + * to 1 in usbconfig.h and return 0xff in usbFunctionSetup().. + */ +#endif /* USB_CFG_IMPLEMENT_FN_WRITE */ +#if USB_CFG_IMPLEMENT_FN_READ +USB_PUBLIC uchar usbFunctionRead(uchar *data, uchar len); +/* This function is called by the driver to ask the application for a control + * transfer's payload data (control-in). It is called in chunks of up to 8 + * bytes each. You should copy the data to the location given by 'data' and + * return the actual number of bytes copied. If you return less than requested, + * the control-in transfer is terminated. If you return 0xff, the driver aborts + * the transfer with a STALL token. + * In order to get usbFunctionRead() called, define USB_CFG_IMPLEMENT_FN_READ + * to 1 in usbconfig.h and return 0xff in usbFunctionSetup().. + */ +#endif /* USB_CFG_IMPLEMENT_FN_READ */ + +extern uchar usbRxToken; /* may be used in usbFunctionWriteOut() below */ +#if USB_CFG_IMPLEMENT_FN_WRITEOUT +USB_PUBLIC void usbFunctionWriteOut(uchar *data, uchar len); +/* This function is called by the driver when data is received on an interrupt- + * or bulk-out endpoint. The endpoint number can be found in the global + * variable usbRxToken. You must define USB_CFG_IMPLEMENT_FN_WRITEOUT to 1 in + * usbconfig.h to get this function called. + */ +#endif /* USB_CFG_IMPLEMENT_FN_WRITEOUT */ +#ifdef USB_CFG_PULLUP_IOPORTNAME +#define usbDeviceConnect() ((USB_PULLUP_DDR |= (1<device, 1=device->host + * t ..... type: 0=standard, 1=class, 2=vendor, 3=reserved + * r ..... recipient: 0=device, 1=interface, 2=endpoint, 3=other + */ + +/* USB setup recipient values */ +#define USBRQ_RCPT_MASK 0x1f +#define USBRQ_RCPT_DEVICE 0 +#define USBRQ_RCPT_INTERFACE 1 +#define USBRQ_RCPT_ENDPOINT 2 + +/* USB request type values */ +#define USBRQ_TYPE_MASK 0x60 +#define USBRQ_TYPE_STANDARD (0<<5) +#define USBRQ_TYPE_CLASS (1<<5) +#define USBRQ_TYPE_VENDOR (2<<5) + +/* USB direction values: */ +#define USBRQ_DIR_MASK 0x80 +#define USBRQ_DIR_HOST_TO_DEVICE (0<<7) +#define USBRQ_DIR_DEVICE_TO_HOST (1<<7) + +/* USB Standard Requests */ +#define USBRQ_GET_STATUS 0 +#define USBRQ_CLEAR_FEATURE 1 +#define USBRQ_SET_FEATURE 3 +#define USBRQ_SET_ADDRESS 5 +#define USBRQ_GET_DESCRIPTOR 6 +#define USBRQ_SET_DESCRIPTOR 7 +#define USBRQ_GET_CONFIGURATION 8 +#define USBRQ_SET_CONFIGURATION 9 +#define USBRQ_GET_INTERFACE 10 +#define USBRQ_SET_INTERFACE 11 +#define USBRQ_SYNCH_FRAME 12 + +/* USB descriptor constants */ +#define USBDESCR_DEVICE 1 +#define USBDESCR_CONFIG 2 +#define USBDESCR_STRING 3 +#define USBDESCR_INTERFACE 4 +#define USBDESCR_ENDPOINT 5 +#define USBDESCR_HID 0x21 +#define USBDESCR_HID_REPORT 0x22 +#define USBDESCR_HID_PHYS 0x23 + +//#define USBATTR_BUSPOWER 0x80 // USB 1.1 does not define this value any more +#define USBATTR_SELFPOWER 0x40 +#define USBATTR_REMOTEWAKE 0x20 + +/* USB HID Requests */ +#define USBRQ_HID_GET_REPORT 0x01 +#define USBRQ_HID_GET_IDLE 0x02 +#define USBRQ_HID_GET_PROTOCOL 0x03 +#define USBRQ_HID_SET_REPORT 0x09 +#define USBRQ_HID_SET_IDLE 0x0a +#define USBRQ_HID_SET_PROTOCOL 0x0b + +/* ------------------------------------------------------------------------- */ + +#endif /* __usbdrv_h_included__ */ diff --git a/usbdrv/usbdrvasm.S b/usbdrv/usbdrvasm.S new file mode 100644 index 000000000..45fcf1831 --- /dev/null +++ b/usbdrv/usbdrvasm.S @@ -0,0 +1,393 @@ +/* Name: usbdrvasm.S + * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers + * Author: Christian Starkjohann + * Creation Date: 2007-06-13 + * Tabsize: 4 + * Copyright: (c) 2007 by OBJECTIVE DEVELOPMENT Software GmbH + * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) + * Revision: $Id: usbdrvasm.S 785 2010-05-30 17:57:07Z cs $ + */ + +/* +General Description: +This module is the assembler part of the USB driver. This file contains +general code (preprocessor acrobatics and CRC computation) and then includes +the file appropriate for the given clock rate. +*/ + +#define __SFR_OFFSET 0 /* used by avr-libc's register definitions */ +#include "usbportability.h" +#include "usbdrv.h" /* for common defs */ + +/* register names */ +#define x1 r16 +#define x2 r17 +#define shift r18 +#define cnt r19 +#define x3 r20 +#define x4 r21 +#define x5 r22 +#define bitcnt x5 +#define phase x4 +#define leap x4 + +/* Some assembler dependent definitions and declarations: */ + +#ifdef __IAR_SYSTEMS_ASM__ + extern usbRxBuf, usbDeviceAddr, usbNewDeviceAddr, usbInputBufOffset + extern usbCurrentTok, usbRxLen, usbRxToken, usbTxLen + extern usbTxBuf, usbTxStatus1, usbTxStatus3 +# if USB_COUNT_SOF + extern usbSofCount +# endif + public usbCrc16 + public usbCrc16Append + + COMMON INTVEC +# ifndef USB_INTR_VECTOR + ORG INT0_vect +# else /* USB_INTR_VECTOR */ + ORG USB_INTR_VECTOR +# undef USB_INTR_VECTOR +# endif /* USB_INTR_VECTOR */ +# define USB_INTR_VECTOR usbInterruptHandler + rjmp USB_INTR_VECTOR + RSEG CODE + +#else /* __IAR_SYSTEMS_ASM__ */ + +# ifndef USB_INTR_VECTOR /* default to hardware interrupt INT0 */ +# ifdef INT0_vect +# define USB_INTR_VECTOR INT0_vect // this is the "new" define for the vector +# else +# define USB_INTR_VECTOR SIG_INTERRUPT0 // this is the "old" vector +# endif +# endif + .text + .global USB_INTR_VECTOR + .type USB_INTR_VECTOR, @function + .global usbCrc16 + .global usbCrc16Append +#endif /* __IAR_SYSTEMS_ASM__ */ + + +#if USB_INTR_PENDING < 0x40 /* This is an I/O address, use in and out */ +# define USB_LOAD_PENDING(reg) in reg, USB_INTR_PENDING +# define USB_STORE_PENDING(reg) out USB_INTR_PENDING, reg +#else /* It's a memory address, use lds and sts */ +# define USB_LOAD_PENDING(reg) lds reg, USB_INTR_PENDING +# define USB_STORE_PENDING(reg) sts USB_INTR_PENDING, reg +#endif + +#define usbTxLen1 usbTxStatus1 +#define usbTxBuf1 (usbTxStatus1 + 1) +#define usbTxLen3 usbTxStatus3 +#define usbTxBuf3 (usbTxStatus3 + 1) + + +;---------------------------------------------------------------------------- +; Utility functions +;---------------------------------------------------------------------------- + +#ifdef __IAR_SYSTEMS_ASM__ +/* Register assignments for usbCrc16 on IAR cc */ +/* Calling conventions on IAR: + * First parameter passed in r16/r17, second in r18/r19 and so on. + * Callee must preserve r4-r15, r24-r29 (r28/r29 is frame pointer) + * Result is passed in r16/r17 + * In case of the "tiny" memory model, pointers are only 8 bit with no + * padding. We therefore pass argument 1 as "16 bit unsigned". + */ +RTMODEL "__rt_version", "3" +/* The line above will generate an error if cc calling conventions change. + * The value "3" above is valid for IAR 4.10B/W32 + */ +# define argLen r18 /* argument 2 */ +# define argPtrL r16 /* argument 1 */ +# define argPtrH r17 /* argument 1 */ + +# define resCrcL r16 /* result */ +# define resCrcH r17 /* result */ + +# define ptrL ZL +# define ptrH ZH +# define ptr Z +# define byte r22 +# define bitCnt r19 +# define polyL r20 +# define polyH r21 +# define scratch r23 + +#else /* __IAR_SYSTEMS_ASM__ */ +/* Register assignments for usbCrc16 on gcc */ +/* Calling conventions on gcc: + * First parameter passed in r24/r25, second in r22/23 and so on. + * Callee must preserve r1-r17, r28/r29 + * Result is passed in r24/r25 + */ +# define argLen r22 /* argument 2 */ +# define argPtrL r24 /* argument 1 */ +# define argPtrH r25 /* argument 1 */ + +# define resCrcL r24 /* result */ +# define resCrcH r25 /* result */ + +# define ptrL XL +# define ptrH XH +# define ptr x +# define byte r18 +# define bitCnt r19 +# define polyL r20 +# define polyH r21 +# define scratch r23 + +#endif + +#if USB_USE_FAST_CRC + +; This implementation is faster, but has bigger code size +; Thanks to Slawomir Fras (BoskiDialer) for this code! +; It implements the following C pseudo-code: +; unsigned table(unsigned char x) +; { +; unsigned value; +; +; value = (unsigned)x << 6; +; value ^= (unsigned)x << 7; +; if(parity(x)) +; value ^= 0xc001; +; return value; +; } +; unsigned usbCrc16(unsigned char *argPtr, unsigned char argLen) +; { +; unsigned crc = 0xffff; +; +; while(argLen--) +; crc = table(lo8(crc) ^ *argPtr++) ^ hi8(crc); +; return ~crc; +; } + +; extern unsigned usbCrc16(unsigned char *argPtr, unsigned char argLen); +; argPtr r24+25 / r16+r17 +; argLen r22 / r18 +; temp variables: +; byte r18 / r22 +; scratch r23 +; resCrc r24+r25 / r16+r17 +; ptr X / Z +usbCrc16: + mov ptrL, argPtrL + mov ptrH, argPtrH + ldi resCrcL, 0xFF + ldi resCrcH, 0xFF + rjmp usbCrc16LoopTest +usbCrc16ByteLoop: + ld byte, ptr+ + eor resCrcL, byte ; resCrcL is now 'x' in table() + mov byte, resCrcL ; compute parity of 'x' + swap byte + eor byte, resCrcL + mov scratch, byte + lsr byte + lsr byte + eor byte, scratch + inc byte + lsr byte + andi byte, 1 ; byte is now parity(x) + mov scratch, resCrcL + mov resCrcL, resCrcH + eor resCrcL, byte ; low byte of if(parity(x)) value ^= 0xc001; + neg byte + andi byte, 0xc0 + mov resCrcH, byte ; high byte of if(parity(x)) value ^= 0xc001; + clr byte + lsr scratch + ror byte + eor resCrcH, scratch + eor resCrcL, byte + lsr scratch + ror byte + eor resCrcH, scratch + eor resCrcL, byte +usbCrc16LoopTest: + subi argLen, 1 + brsh usbCrc16ByteLoop + com resCrcL + com resCrcH + ret + +#else /* USB_USE_FAST_CRC */ + +; This implementation is slower, but has less code size +; +; extern unsigned usbCrc16(unsigned char *argPtr, unsigned char argLen); +; argPtr r24+25 / r16+r17 +; argLen r22 / r18 +; temp variables: +; byte r18 / r22 +; bitCnt r19 +; poly r20+r21 +; scratch r23 +; resCrc r24+r25 / r16+r17 +; ptr X / Z +usbCrc16: + mov ptrL, argPtrL + mov ptrH, argPtrH + ldi resCrcL, 0 + ldi resCrcH, 0 + ldi polyL, lo8(0xa001) + ldi polyH, hi8(0xa001) + com argLen ; argLen = -argLen - 1: modified loop to ensure that carry is set + ldi bitCnt, 0 ; loop counter with starnd condition = end condition + rjmp usbCrcLoopEntry +usbCrcByteLoop: + ld byte, ptr+ + eor resCrcL, byte +usbCrcBitLoop: + ror resCrcH ; carry is always set here (see brcs jumps to here) + ror resCrcL + brcs usbCrcNoXor + eor resCrcL, polyL + eor resCrcH, polyH +usbCrcNoXor: + subi bitCnt, 224 ; (8 * 224) % 256 = 0; this loop iterates 8 times + brcs usbCrcBitLoop +usbCrcLoopEntry: + subi argLen, -1 + brcs usbCrcByteLoop +usbCrcReady: + ret +; Thanks to Reimar Doeffinger for optimizing this CRC routine! + +#endif /* USB_USE_FAST_CRC */ + +; extern unsigned usbCrc16Append(unsigned char *data, unsigned char len); +usbCrc16Append: + rcall usbCrc16 + st ptr+, resCrcL + st ptr+, resCrcH + ret + +#undef argLen +#undef argPtrL +#undef argPtrH +#undef resCrcL +#undef resCrcH +#undef ptrL +#undef ptrH +#undef ptr +#undef byte +#undef bitCnt +#undef polyL +#undef polyH +#undef scratch + + +#if USB_CFG_HAVE_MEASURE_FRAME_LENGTH +#ifdef __IAR_SYSTEMS_ASM__ +/* Register assignments for usbMeasureFrameLength on IAR cc */ +/* Calling conventions on IAR: + * First parameter passed in r16/r17, second in r18/r19 and so on. + * Callee must preserve r4-r15, r24-r29 (r28/r29 is frame pointer) + * Result is passed in r16/r17 + * In case of the "tiny" memory model, pointers are only 8 bit with no + * padding. We therefore pass argument 1 as "16 bit unsigned". + */ +# define resL r16 +# define resH r17 +# define cnt16L r30 +# define cnt16H r31 +# define cntH r18 + +#else /* __IAR_SYSTEMS_ASM__ */ +/* Register assignments for usbMeasureFrameLength on gcc */ +/* Calling conventions on gcc: + * First parameter passed in r24/r25, second in r22/23 and so on. + * Callee must preserve r1-r17, r28/r29 + * Result is passed in r24/r25 + */ +# define resL r24 +# define resH r25 +# define cnt16L r24 +# define cnt16H r25 +# define cntH r26 +#endif +# define cnt16 cnt16L + +; extern unsigned usbMeasurePacketLength(void); +; returns time between two idle strobes in multiples of 7 CPU clocks +.global usbMeasureFrameLength +usbMeasureFrameLength: + ldi cntH, 6 ; wait ~ 10 ms for D- == 0 + clr cnt16L + clr cnt16H +usbMFTime16: + dec cntH + breq usbMFTimeout +usbMFWaitStrobe: ; first wait for D- == 0 (idle strobe) + sbiw cnt16, 1 ;[0] [6] + breq usbMFTime16 ;[2] + sbic USBIN, USBMINUS ;[3] + rjmp usbMFWaitStrobe ;[4] +usbMFWaitIdle: ; then wait until idle again + sbis USBIN, USBMINUS ;1 wait for D- == 1 + rjmp usbMFWaitIdle ;2 + ldi cnt16L, 1 ;1 represents cycles so far + clr cnt16H ;1 +usbMFWaitLoop: + in cntH, USBIN ;[0] [7] + adiw cnt16, 1 ;[1] + breq usbMFTimeout ;[3] + andi cntH, USBMASK ;[4] + brne usbMFWaitLoop ;[5] +usbMFTimeout: +#if resL != cnt16L + mov resL, cnt16L + mov resH, cnt16H +#endif + ret + +#undef resL +#undef resH +#undef cnt16 +#undef cnt16L +#undef cnt16H +#undef cntH + +#endif /* USB_CFG_HAVE_MEASURE_FRAME_LENGTH */ + +;---------------------------------------------------------------------------- +; Now include the clock rate specific code +;---------------------------------------------------------------------------- + +#ifndef USB_CFG_CLOCK_KHZ +# ifdef F_CPU +# define USB_CFG_CLOCK_KHZ (F_CPU/1000) +# else +# error "USB_CFG_CLOCK_KHZ not defined in usbconfig.h and no F_CPU set!" +# endif +#endif + +#if USB_CFG_CHECK_CRC /* separate dispatcher for CRC type modules */ +# if USB_CFG_CLOCK_KHZ == 18000 +# include "usbdrvasm18-crc.inc" +# else +# error "USB_CFG_CLOCK_KHZ is not one of the supported crc-rates!" +# endif +#else /* USB_CFG_CHECK_CRC */ +# if USB_CFG_CLOCK_KHZ == 12000 +# include "usbdrvasm12.inc" +# elif USB_CFG_CLOCK_KHZ == 12800 +# include "usbdrvasm128.inc" +# elif USB_CFG_CLOCK_KHZ == 15000 +# include "usbdrvasm15.inc" +# elif USB_CFG_CLOCK_KHZ == 16000 +# include "usbdrvasm16.inc" +# elif USB_CFG_CLOCK_KHZ == 16500 +# include "usbdrvasm165.inc" +# elif USB_CFG_CLOCK_KHZ == 20000 +# include "usbdrvasm20.inc" +# else +# error "USB_CFG_CLOCK_KHZ is not one of the supported non-crc-rates!" +# endif +#endif /* USB_CFG_CHECK_CRC */ diff --git a/usbdrv/usbdrvasm.asm b/usbdrv/usbdrvasm.asm new file mode 100644 index 000000000..9cc4e4d73 --- /dev/null +++ b/usbdrv/usbdrvasm.asm @@ -0,0 +1,21 @@ +/* Name: usbdrvasm.asm + * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers + * Author: Christian Starkjohann + * Creation Date: 2006-03-01 + * Tabsize: 4 + * Copyright: (c) 2006 by OBJECTIVE DEVELOPMENT Software GmbH + * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) + * This Revision: $Id$ + */ + +/* +General Description: +The IAR compiler/assembler system prefers assembler files with file extension +".asm". We simply provide this file as an alias for usbdrvasm.S. + +Thanks to Oleg Semyonov for his help with the IAR tools port! +*/ + +#include "usbdrvasm.S" + +end diff --git a/usbdrv/usbdrvasm12.inc b/usbdrv/usbdrvasm12.inc new file mode 100644 index 000000000..c1167584c --- /dev/null +++ b/usbdrv/usbdrvasm12.inc @@ -0,0 +1,393 @@ +/* Name: usbdrvasm12.inc + * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers + * Author: Christian Starkjohann + * Creation Date: 2004-12-29 + * Tabsize: 4 + * Copyright: (c) 2007 by OBJECTIVE DEVELOPMENT Software GmbH + * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) + * This Revision: $Id: usbdrvasm12.inc 740 2009-04-13 18:23:31Z cs $ + */ + +/* Do not link this file! Link usbdrvasm.S instead, which includes the + * appropriate implementation! + */ + +/* +General Description: +This file is the 12 MHz version of the asssembler part of the USB driver. It +requires a 12 MHz crystal (not a ceramic resonator and not a calibrated RC +oscillator). + +See usbdrv.h for a description of the entire driver. + +Since almost all of this code is timing critical, don't change unless you +really know what you are doing! Many parts require not only a maximum number +of CPU cycles, but even an exact number of cycles! + + +Timing constraints according to spec (in bit times): +timing subject min max CPUcycles +--------------------------------------------------------------------------- +EOP of OUT/SETUP to sync pattern of DATA0 (both rx) 2 16 16-128 +EOP of IN to sync pattern of DATA0 (rx, then tx) 2 7.5 16-60 +DATAx (rx) to ACK/NAK/STALL (tx) 2 7.5 16-60 +*/ + +;Software-receiver engine. Strict timing! Don't change unless you can preserve timing! +;interrupt response time: 4 cycles + insn running = 7 max if interrupts always enabled +;max allowable interrupt latency: 34 cycles -> max 25 cycles interrupt disable +;max stack usage: [ret(2), YL, SREG, YH, shift, x1, x2, x3, cnt, x4] = 11 bytes +;Numbers in brackets are maximum cycles since SOF. +USB_INTR_VECTOR: +;order of registers pushed: YL, SREG [sofError], YH, shift, x1, x2, x3, cnt + push YL ;2 [35] push only what is necessary to sync with edge ASAP + in YL, SREG ;1 [37] + push YL ;2 [39] +;---------------------------------------------------------------------------- +; Synchronize with sync pattern: +;---------------------------------------------------------------------------- +;sync byte (D-) pattern LSb to MSb: 01010100 [1 = idle = J, 0 = K] +;sync up with J to K edge during sync pattern -- use fastest possible loops +;The first part waits at most 1 bit long since we must be in sync pattern. +;YL is guarenteed to be < 0x80 because I flag is clear. When we jump to +;waitForJ, ensure that this prerequisite is met. +waitForJ: + inc YL + sbis USBIN, USBMINUS + brne waitForJ ; just make sure we have ANY timeout +waitForK: +;The following code results in a sampling window of 1/4 bit which meets the spec. + sbis USBIN, USBMINUS + rjmp foundK + sbis USBIN, USBMINUS + rjmp foundK + sbis USBIN, USBMINUS + rjmp foundK + sbis USBIN, USBMINUS + rjmp foundK + sbis USBIN, USBMINUS + rjmp foundK +#if USB_COUNT_SOF + lds YL, usbSofCount + inc YL + sts usbSofCount, YL +#endif /* USB_COUNT_SOF */ +#ifdef USB_SOF_HOOK + USB_SOF_HOOK +#endif + rjmp sofError +foundK: +;{3, 5} after falling D- edge, average delay: 4 cycles [we want 4 for center sampling] +;we have 1 bit time for setup purposes, then sample again. Numbers in brackets +;are cycles from center of first sync (double K) bit after the instruction + push YH ;2 [2] + lds YL, usbInputBufOffset;2 [4] + clr YH ;1 [5] + subi YL, lo8(-(usbRxBuf));1 [6] + sbci YH, hi8(-(usbRxBuf));1 [7] + + sbis USBIN, USBMINUS ;1 [8] we want two bits K [sample 1 cycle too early] + rjmp haveTwoBitsK ;2 [10] + pop YH ;2 [11] undo the push from before + rjmp waitForK ;2 [13] this was not the end of sync, retry +haveTwoBitsK: +;---------------------------------------------------------------------------- +; push more registers and initialize values while we sample the first bits: +;---------------------------------------------------------------------------- + push shift ;2 [16] + push x1 ;2 [12] + push x2 ;2 [14] + + in x1, USBIN ;1 [17] <-- sample bit 0 + ldi shift, 0xff ;1 [18] + bst x1, USBMINUS ;1 [19] + bld shift, 0 ;1 [20] + push x3 ;2 [22] + push cnt ;2 [24] + + in x2, USBIN ;1 [25] <-- sample bit 1 + ser x3 ;1 [26] [inserted init instruction] + eor x1, x2 ;1 [27] + bst x1, USBMINUS ;1 [28] + bld shift, 1 ;1 [29] + ldi cnt, USB_BUFSIZE;1 [30] [inserted init instruction] + rjmp rxbit2 ;2 [32] + +;---------------------------------------------------------------------------- +; Receiver loop (numbers in brackets are cycles within byte after instr) +;---------------------------------------------------------------------------- + +unstuff0: ;1 (branch taken) + andi x3, ~0x01 ;1 [15] + mov x1, x2 ;1 [16] x2 contains last sampled (stuffed) bit + in x2, USBIN ;1 [17] <-- sample bit 1 again + ori shift, 0x01 ;1 [18] + rjmp didUnstuff0 ;2 [20] + +unstuff1: ;1 (branch taken) + mov x2, x1 ;1 [21] x1 contains last sampled (stuffed) bit + andi x3, ~0x02 ;1 [22] + ori shift, 0x02 ;1 [23] + nop ;1 [24] + in x1, USBIN ;1 [25] <-- sample bit 2 again + rjmp didUnstuff1 ;2 [27] + +unstuff2: ;1 (branch taken) + andi x3, ~0x04 ;1 [29] + ori shift, 0x04 ;1 [30] + mov x1, x2 ;1 [31] x2 contains last sampled (stuffed) bit + nop ;1 [32] + in x2, USBIN ;1 [33] <-- sample bit 3 + rjmp didUnstuff2 ;2 [35] + +unstuff3: ;1 (branch taken) + in x2, USBIN ;1 [34] <-- sample stuffed bit 3 [one cycle too late] + andi x3, ~0x08 ;1 [35] + ori shift, 0x08 ;1 [36] + rjmp didUnstuff3 ;2 [38] + +unstuff4: ;1 (branch taken) + andi x3, ~0x10 ;1 [40] + in x1, USBIN ;1 [41] <-- sample stuffed bit 4 + ori shift, 0x10 ;1 [42] + rjmp didUnstuff4 ;2 [44] + +unstuff5: ;1 (branch taken) + andi x3, ~0x20 ;1 [48] + in x2, USBIN ;1 [49] <-- sample stuffed bit 5 + ori shift, 0x20 ;1 [50] + rjmp didUnstuff5 ;2 [52] + +unstuff6: ;1 (branch taken) + andi x3, ~0x40 ;1 [56] + in x1, USBIN ;1 [57] <-- sample stuffed bit 6 + ori shift, 0x40 ;1 [58] + rjmp didUnstuff6 ;2 [60] + +; extra jobs done during bit interval: +; bit 0: store, clear [SE0 is unreliable here due to bit dribbling in hubs] +; bit 1: se0 check +; bit 2: overflow check +; bit 3: recovery from delay [bit 0 tasks took too long] +; bit 4: none +; bit 5: none +; bit 6: none +; bit 7: jump, eor +rxLoop: + eor x3, shift ;1 [0] reconstruct: x3 is 0 at bit locations we changed, 1 at others + in x1, USBIN ;1 [1] <-- sample bit 0 + st y+, x3 ;2 [3] store data + ser x3 ;1 [4] + nop ;1 [5] + eor x2, x1 ;1 [6] + bst x2, USBMINUS;1 [7] + bld shift, 0 ;1 [8] + in x2, USBIN ;1 [9] <-- sample bit 1 (or possibly bit 0 stuffed) + andi x2, USBMASK ;1 [10] + breq se0 ;1 [11] SE0 check for bit 1 + andi shift, 0xf9 ;1 [12] +didUnstuff0: + breq unstuff0 ;1 [13] + eor x1, x2 ;1 [14] + bst x1, USBMINUS;1 [15] + bld shift, 1 ;1 [16] +rxbit2: + in x1, USBIN ;1 [17] <-- sample bit 2 (or possibly bit 1 stuffed) + andi shift, 0xf3 ;1 [18] + breq unstuff1 ;1 [19] do remaining work for bit 1 +didUnstuff1: + subi cnt, 1 ;1 [20] + brcs overflow ;1 [21] loop control + eor x2, x1 ;1 [22] + bst x2, USBMINUS;1 [23] + bld shift, 2 ;1 [24] + in x2, USBIN ;1 [25] <-- sample bit 3 (or possibly bit 2 stuffed) + andi shift, 0xe7 ;1 [26] + breq unstuff2 ;1 [27] +didUnstuff2: + eor x1, x2 ;1 [28] + bst x1, USBMINUS;1 [29] + bld shift, 3 ;1 [30] +didUnstuff3: + andi shift, 0xcf ;1 [31] + breq unstuff3 ;1 [32] + in x1, USBIN ;1 [33] <-- sample bit 4 + eor x2, x1 ;1 [34] + bst x2, USBMINUS;1 [35] + bld shift, 4 ;1 [36] +didUnstuff4: + andi shift, 0x9f ;1 [37] + breq unstuff4 ;1 [38] + nop2 ;2 [40] + in x2, USBIN ;1 [41] <-- sample bit 5 + eor x1, x2 ;1 [42] + bst x1, USBMINUS;1 [43] + bld shift, 5 ;1 [44] +didUnstuff5: + andi shift, 0x3f ;1 [45] + breq unstuff5 ;1 [46] + nop2 ;2 [48] + in x1, USBIN ;1 [49] <-- sample bit 6 + eor x2, x1 ;1 [50] + bst x2, USBMINUS;1 [51] + bld shift, 6 ;1 [52] +didUnstuff6: + cpi shift, 0x02 ;1 [53] + brlo unstuff6 ;1 [54] + nop2 ;2 [56] + in x2, USBIN ;1 [57] <-- sample bit 7 + eor x1, x2 ;1 [58] + bst x1, USBMINUS;1 [59] + bld shift, 7 ;1 [60] +didUnstuff7: + cpi shift, 0x04 ;1 [61] + brsh rxLoop ;2 [63] loop control +unstuff7: + andi x3, ~0x80 ;1 [63] + ori shift, 0x80 ;1 [64] + in x2, USBIN ;1 [65] <-- sample stuffed bit 7 + nop ;1 [66] + rjmp didUnstuff7 ;2 [68] + +macro POP_STANDARD ; 12 cycles + pop cnt + pop x3 + pop x2 + pop x1 + pop shift + pop YH + endm +macro POP_RETI ; 5 cycles + pop YL + out SREG, YL + pop YL + endm + +#include "asmcommon.inc" + +;---------------------------------------------------------------------------- +; Transmitting data +;---------------------------------------------------------------------------- + +txByteLoop: +txBitloop: +stuffN1Delay: ; [03] + ror shift ;[-5] [11] [59] + brcc doExorN1 ;[-4] [60] + subi x4, 1 ;[-3] + brne commonN1 ;[-2] + lsl shift ;[-1] compensate ror after rjmp stuffDelay + nop ;[00] stuffing consists of just waiting 8 cycles + rjmp stuffN1Delay ;[01] after ror, C bit is reliably clear + +sendNakAndReti: ;0 [-19] 19 cycles until SOP + ldi x3, USBPID_NAK ;1 [-18] + rjmp usbSendX3 ;2 [-16] +sendAckAndReti: ;0 [-19] 19 cycles until SOP + ldi x3, USBPID_ACK ;1 [-18] + rjmp usbSendX3 ;2 [-16] +sendCntAndReti: ;0 [-17] 17 cycles until SOP + mov x3, cnt ;1 [-16] +usbSendX3: ;0 [-16] + ldi YL, 20 ;1 [-15] 'x3' is R20 + ldi YH, 0 ;1 [-14] + ldi cnt, 2 ;1 [-13] +; rjmp usbSendAndReti fallthrough + +; USB spec says: +; idle = J +; J = (D+ = 0), (D- = 1) or USBOUT = 0x01 +; K = (D+ = 1), (D- = 0) or USBOUT = 0x02 +; Spec allows 7.5 bit times from EOP to SOP for replies (= 60 cycles) + +;usbSend: +;pointer to data in 'Y' +;number of bytes in 'cnt' -- including sync byte +;uses: x1...x2, x4, shift, cnt, Y [x1 = mirror USBOUT, x2 = USBMASK, x4 = bitstuff cnt] +;Numbers in brackets are time since first bit of sync pattern is sent (start of instruction) +usbSendAndReti: + in x2, USBDDR ;[-12] 12 cycles until SOP + ori x2, USBMASK ;[-11] + sbi USBOUT, USBMINUS ;[-10] prepare idle state; D+ and D- must have been 0 (no pullups) + out USBDDR, x2 ;[-8] <--- acquire bus + in x1, USBOUT ;[-7] port mirror for tx loop + ldi shift, 0x40 ;[-6] sync byte is first byte sent (we enter loop after ror) + ldi x2, USBMASK ;[-5] + push x4 ;[-4] +doExorN1: + eor x1, x2 ;[-2] [06] [62] + ldi x4, 6 ;[-1] [07] [63] +commonN1: +stuffN2Delay: + out USBOUT, x1 ;[00] [08] [64] <--- set bit + ror shift ;[01] + brcc doExorN2 ;[02] + subi x4, 1 ;[03] + brne commonN2 ;[04] + lsl shift ;[05] compensate ror after rjmp stuffDelay + rjmp stuffN2Delay ;[06] after ror, C bit is reliably clear +doExorN2: + eor x1, x2 ;[04] [12] + ldi x4, 6 ;[05] [13] +commonN2: + nop ;[06] [14] + subi cnt, 171 ;[07] [15] trick: (3 * 171) & 0xff = 1 + out USBOUT, x1 ;[08] [16] <--- set bit + brcs txBitloop ;[09] [25] [41] + +stuff6Delay: + ror shift ;[42] [50] + brcc doExor6 ;[43] + subi x4, 1 ;[44] + brne common6 ;[45] + lsl shift ;[46] compensate ror after rjmp stuffDelay + nop ;[47] stuffing consists of just waiting 8 cycles + rjmp stuff6Delay ;[48] after ror, C bit is reliably clear +doExor6: + eor x1, x2 ;[45] [53] + ldi x4, 6 ;[46] +common6: +stuff7Delay: + ror shift ;[47] [55] + out USBOUT, x1 ;[48] <--- set bit + brcc doExor7 ;[49] + subi x4, 1 ;[50] + brne common7 ;[51] + lsl shift ;[52] compensate ror after rjmp stuffDelay + rjmp stuff7Delay ;[53] after ror, C bit is reliably clear +doExor7: + eor x1, x2 ;[51] [59] + ldi x4, 6 ;[52] +common7: + ld shift, y+ ;[53] + tst cnt ;[55] + out USBOUT, x1 ;[56] <--- set bit + brne txByteLoop ;[57] + +;make SE0: + cbr x1, USBMASK ;[58] prepare SE0 [spec says EOP may be 15 to 18 cycles] + lds x2, usbNewDeviceAddr;[59] + lsl x2 ;[61] we compare with left shifted address + subi YL, 2 + 20 ;[62] Only assign address on data packets, not ACK/NAK in x3 + sbci YH, 0 ;[63] + out USBOUT, x1 ;[00] <-- out SE0 -- from now 2 bits = 16 cycles until bus idle +;2006-03-06: moved transfer of new address to usbDeviceAddr from C-Code to asm: +;set address only after data packet was sent, not after handshake + breq skipAddrAssign ;[01] + sts usbDeviceAddr, x2 ; if not skipped: SE0 is one cycle longer +skipAddrAssign: +;end of usbDeviceAddress transfer + ldi x2, 1< 12.5625 MHz +max frequency: 69.286 cycles for 8 bit -> 12.99 MHz +nominal frequency: 12.77 MHz ( = sqrt(min * max)) + +sampling positions: (next even number in range [+/- 0.5]) +cycle index range: 0 ... 66 +bits: +.5, 8.875, 17.25, 25.625, 34, 42.375, 50.75, 59.125 +[0/1], [9], [17], [25/+26], [34], [+42/43], [51], [59] + +bit number: 0 1 2 3 4 5 6 7 +spare cycles 1 2 1 2 1 1 1 0 + +operations to perform: duration cycle + ---------------- + eor fix, shift 1 -> 00 + andi phase, USBMASK 1 -> 08 + breq se0 1 -> 16 (moved to 11) + st y+, data 2 -> 24, 25 + mov data, fix 1 -> 33 + ser data 1 -> 41 + subi cnt, 1 1 -> 49 + brcs overflow 1 -> 50 + +layout of samples and operations: +[##] = sample bit +<##> = sample phase +*##* = operation + +0: *00* [01] 02 03 04 <05> 06 07 +1: *08* [09] 10 11 12 <13> 14 15 *16* +2: [17] 18 19 20 <21> 22 23 +3: *24* *25* [26] 27 28 29 <30> 31 32 +4: *33* [34] 35 36 37 <38> 39 40 +5: *41* [42] 43 44 45 <46> 47 48 +6: *49* *50* [51] 52 53 54 <55> 56 57 58 +7: [59] 60 61 62 <63> 64 65 66 +*****************************************************************************/ + +/* we prefer positive expressions (do if condition) instead of negative + * (skip if condition), therefore use defines for skip instructions: + */ +#define ifioclr sbis +#define ifioset sbic +#define ifrclr sbrs +#define ifrset sbrc + +/* The registers "fix" and "data" swap their meaning during the loop. Use + * defines to keep their name constant. + */ +#define fix x2 +#define data x1 +#undef phase /* phase has a default definition to x4 */ +#define phase x3 + + +USB_INTR_VECTOR: +;order of registers pushed: YL, SREG [sofError], YH, shift, x1, x2, x3, cnt, r0 + push YL ;2 push only what is necessary to sync with edge ASAP + in YL, SREG ;1 + push YL ;2 +;---------------------------------------------------------------------------- +; Synchronize with sync pattern: +;---------------------------------------------------------------------------- +;sync byte (D-) pattern LSb to MSb: 01010100 [1 = idle = J, 0 = K] +;sync up with J to K edge during sync pattern -- use fastest possible loops +;The first part waits at most 1 bit long since we must be in sync pattern. +;YL is guarenteed to be < 0x80 because I flag is clear. When we jump to +;waitForJ, ensure that this prerequisite is met. +waitForJ: + inc YL + sbis USBIN, USBMINUS + brne waitForJ ; just make sure we have ANY timeout +waitForK: +;The following code results in a sampling window of 1/4 bit which meets the spec. + sbis USBIN, USBMINUS + rjmp foundK + sbis USBIN, USBMINUS + rjmp foundK + sbis USBIN, USBMINUS + rjmp foundK + sbis USBIN, USBMINUS + rjmp foundK + sbis USBIN, USBMINUS ;[0] + rjmp foundK ;[1] +#if USB_COUNT_SOF + lds YL, usbSofCount + inc YL + sts usbSofCount, YL +#endif /* USB_COUNT_SOF */ +#ifdef USB_SOF_HOOK + USB_SOF_HOOK +#endif + rjmp sofError + +foundK: +;{3, 5} after falling D- edge, average delay: 4 cycles [we want 4 for center sampling] +;we have 1 bit time for setup purposes, then sample again. Numbers in brackets +;are cycles from center of first sync (double K) bit after the instruction + push YH ;[2] + lds YL, usbInputBufOffset;[4] + clr YH ;[6] + subi YL, lo8(-(usbRxBuf));[7] + sbci YH, hi8(-(usbRxBuf));[8] + + sbis USBIN, USBMINUS ;[9] we want two bits K [we want to sample at 8 + 4 - 1.5 = 10.5] + rjmp haveTwoBitsK ;[10] + pop YH ;[11] undo the push from before + rjmp waitForK ;[13] this was not the end of sync, retry +haveTwoBitsK: +;---------------------------------------------------------------------------- +; push more registers and initialize values while we sample the first bits: +;---------------------------------------------------------------------------- +#define fix x2 +#define data x1 + + push shift ;[12] + push x1 ;[14] + push x2 ;[16] + ldi shift, 0x80 ;[18] prevent bit-unstuffing but init low bits to 0 + ifioset USBIN, USBMINUS ;[19] [01] <--- bit 0 [10.5 + 8 = 18.5] + ori shift, 1<<0 ;[02] + push x3 ;[03] + push cnt ;[05] + push r0 ;[07] + ifioset USBIN, USBMINUS ;[09] <--- bit 1 + ori shift, 1<<1 ;[10] + ser fix ;[11] + ldi cnt, USB_BUFSIZE ;[12] + mov data, shift ;[13] + lsl shift ;[14] + nop2 ;[15] + ifioset USBIN, USBMINUS ;[17] <--- bit 2 + ori data, 3<<2 ;[18] store in bit 2 AND bit 3 + eor shift, data ;[19] do nrzi decoding + andi data, 1<<3 ;[20] + in phase, USBIN ;[21] <- phase + brne jumpToEntryAfterSet ;[22] if USBMINS at bit 3 was 1 + nop ;[23] + rjmp entryAfterClr ;[24] +jumpToEntryAfterSet: + rjmp entryAfterSet ;[24] + +;---------------------------------------------------------------------------- +; Receiver loop (numbers in brackets are cycles within byte after instr) +;---------------------------------------------------------------------------- +#undef fix +#define fix x1 +#undef data +#define data x2 + +bit7IsSet: + ifrclr phase, USBMINUS ;[62] check phase only if D- changed + lpm ;[63] + in phase, USBIN ;[64] <- phase (one cycle too late) + ori shift, 1 << 7 ;[65] + nop ;[66] +;;;;rjmp bit0AfterSet ; -> [00] == [67] moved block up to save jump +bit0AfterSet: + eor fix, shift ;[00] +#undef fix +#define fix x2 +#undef data +#define data x1 /* we now have result in data, fix is reset to 0xff */ + ifioclr USBIN, USBMINUS ;[01] <--- sample 0 + rjmp bit0IsClr ;[02] + andi shift, ~(7 << 0) ;[03] + breq unstuff0s ;[04] + in phase, USBIN ;[05] <- phase + rjmp bit1AfterSet ;[06] +unstuff0s: + in phase, USBIN ;[06] <- phase (one cycle too late) + andi fix, ~(1 << 0) ;[07] + ifioclr USBIN, USBMINUS ;[00] + ifioset USBIN, USBPLUS ;[01] + rjmp bit0IsClr ;[02] executed if first expr false or second true +se0AndStore: ; executed only if both bits 0 + st y+, x1 ;[15/17] cycles after start of byte + rjmp se0 ;[17/19] + +bit0IsClr: + ifrset phase, USBMINUS ;[04] check phase only if D- changed + lpm ;[05] + in phase, USBIN ;[06] <- phase (one cycle too late) + ori shift, 1 << 0 ;[07] +bit1AfterClr: + andi phase, USBMASK ;[08] + ifioset USBIN, USBMINUS ;[09] <--- sample 1 + rjmp bit1IsSet ;[10] + breq se0AndStore ;[11] if D- was 0 in bits 0 AND 1 and D+ was 0 in between, we have SE0 + andi shift, ~(7 << 1) ;[12] + in phase, USBIN ;[13] <- phase + breq unstuff1c ;[14] + rjmp bit2AfterClr ;[15] +unstuff1c: + andi fix, ~(1 << 1) ;[16] + nop2 ;[08] + nop2 ;[10] +bit1IsSet: + ifrclr phase, USBMINUS ;[12] check phase only if D- changed + lpm ;[13] + in phase, USBIN ;[14] <- phase (one cycle too late) + ori shift, 1 << 1 ;[15] + nop ;[16] +bit2AfterSet: + ifioclr USBIN, USBMINUS ;[17] <--- sample 2 + rjmp bit2IsClr ;[18] + andi shift, ~(7 << 2) ;[19] + breq unstuff2s ;[20] + in phase, USBIN ;[21] <- phase + rjmp bit3AfterSet ;[22] +unstuff2s: + in phase, USBIN ;[22] <- phase (one cycle too late) + andi fix, ~(1 << 2) ;[23] + nop2 ;[16] + nop2 ;[18] +bit2IsClr: + ifrset phase, USBMINUS ;[20] check phase only if D- changed + lpm ;[21] + in phase, USBIN ;[22] <- phase (one cycle too late) + ori shift, 1 << 2 ;[23] +bit3AfterClr: + st y+, data ;[24] +entryAfterClr: + ifioset USBIN, USBMINUS ;[26] <--- sample 3 + rjmp bit3IsSet ;[27] + andi shift, ~(7 << 3) ;[28] + breq unstuff3c ;[29] + in phase, USBIN ;[30] <- phase + rjmp bit4AfterClr ;[31] +unstuff3c: + in phase, USBIN ;[31] <- phase (one cycle too late) + andi fix, ~(1 << 3) ;[32] + nop2 ;[25] + nop2 ;[27] +bit3IsSet: + ifrclr phase, USBMINUS ;[29] check phase only if D- changed + lpm ;[30] + in phase, USBIN ;[31] <- phase (one cycle too late) + ori shift, 1 << 3 ;[32] +bit4AfterSet: + mov data, fix ;[33] undo this move by swapping defines +#undef fix +#define fix x1 +#undef data +#define data x2 + ifioclr USBIN, USBMINUS ;[34] <--- sample 4 + rjmp bit4IsClr ;[35] + andi shift, ~(7 << 4) ;[36] + breq unstuff4s ;[37] + in phase, USBIN ;[38] <- phase + rjmp bit5AfterSet ;[39] +unstuff4s: + in phase, USBIN ;[39] <- phase (one cycle too late) + andi fix, ~(1 << 4) ;[40] + nop2 ;[33] + nop2 ;[35] +bit4IsClr: + ifrset phase, USBMINUS ;[37] check phase only if D- changed + lpm ;[38] + in phase, USBIN ;[39] <- phase (one cycle too late) + ori shift, 1 << 4 ;[40] +bit5AfterClr: + ser data ;[41] + ifioset USBIN, USBMINUS ;[42] <--- sample 5 + rjmp bit5IsSet ;[43] + andi shift, ~(7 << 5) ;[44] + breq unstuff5c ;[45] + in phase, USBIN ;[46] <- phase + rjmp bit6AfterClr ;[47] +unstuff5c: + in phase, USBIN ;[47] <- phase (one cycle too late) + andi fix, ~(1 << 5) ;[48] + nop2 ;[41] + nop2 ;[43] +bit5IsSet: + ifrclr phase, USBMINUS ;[45] check phase only if D- changed + lpm ;[46] + in phase, USBIN ;[47] <- phase (one cycle too late) + ori shift, 1 << 5 ;[48] +bit6AfterSet: + subi cnt, 1 ;[49] + brcs jumpToOverflow ;[50] + ifioclr USBIN, USBMINUS ;[51] <--- sample 6 + rjmp bit6IsClr ;[52] + andi shift, ~(3 << 6) ;[53] + cpi shift, 2 ;[54] + in phase, USBIN ;[55] <- phase + brlt unstuff6s ;[56] + rjmp bit7AfterSet ;[57] + +jumpToOverflow: + rjmp overflow + +unstuff6s: + andi fix, ~(1 << 6) ;[50] + lpm ;[51] +bit6IsClr: + ifrset phase, USBMINUS ;[54] check phase only if D- changed + lpm ;[55] + in phase, USBIN ;[56] <- phase (one cycle too late) + ori shift, 1 << 6 ;[57] + nop ;[58] +bit7AfterClr: + ifioset USBIN, USBMINUS ;[59] <--- sample 7 + rjmp bit7IsSet ;[60] + andi shift, ~(1 << 7) ;[61] + cpi shift, 4 ;[62] + in phase, USBIN ;[63] <- phase + brlt unstuff7c ;[64] + rjmp bit0AfterClr ;[65] -> [00] == [67] +unstuff7c: + andi fix, ~(1 << 7) ;[58] + nop ;[59] + rjmp bit7IsSet ;[60] + +bit7IsClr: + ifrset phase, USBMINUS ;[62] check phase only if D- changed + lpm ;[63] + in phase, USBIN ;[64] <- phase (one cycle too late) + ori shift, 1 << 7 ;[65] + nop ;[66] +;;;;rjmp bit0AfterClr ; -> [00] == [67] moved block up to save jump +bit0AfterClr: + eor fix, shift ;[00] +#undef fix +#define fix x2 +#undef data +#define data x1 /* we now have result in data, fix is reset to 0xff */ + ifioset USBIN, USBMINUS ;[01] <--- sample 0 + rjmp bit0IsSet ;[02] + andi shift, ~(7 << 0) ;[03] + breq unstuff0c ;[04] + in phase, USBIN ;[05] <- phase + rjmp bit1AfterClr ;[06] +unstuff0c: + in phase, USBIN ;[06] <- phase (one cycle too late) + andi fix, ~(1 << 0) ;[07] + ifioclr USBIN, USBMINUS ;[00] + ifioset USBIN, USBPLUS ;[01] + rjmp bit0IsSet ;[02] executed if first expr false or second true + rjmp se0AndStore ;[03] executed only if both bits 0 +bit0IsSet: + ifrclr phase, USBMINUS ;[04] check phase only if D- changed + lpm ;[05] + in phase, USBIN ;[06] <- phase (one cycle too late) + ori shift, 1 << 0 ;[07] +bit1AfterSet: + andi shift, ~(7 << 1) ;[08] compensated by "ori shift, 1<<1" if bit1IsClr + ifioclr USBIN, USBMINUS ;[09] <--- sample 1 + rjmp bit1IsClr ;[10] + breq unstuff1s ;[11] + nop2 ;[12] do not check for SE0 if bit 0 was 1 + in phase, USBIN ;[14] <- phase (one cycle too late) + rjmp bit2AfterSet ;[15] +unstuff1s: + in phase, USBIN ;[13] <- phase + andi fix, ~(1 << 1) ;[14] + lpm ;[07] + nop2 ;[10] +bit1IsClr: + ifrset phase, USBMINUS ;[12] check phase only if D- changed + lpm ;[13] + in phase, USBIN ;[14] <- phase (one cycle too late) + ori shift, 1 << 1 ;[15] + nop ;[16] +bit2AfterClr: + ifioset USBIN, USBMINUS ;[17] <--- sample 2 + rjmp bit2IsSet ;[18] + andi shift, ~(7 << 2) ;[19] + breq unstuff2c ;[20] + in phase, USBIN ;[21] <- phase + rjmp bit3AfterClr ;[22] +unstuff2c: + in phase, USBIN ;[22] <- phase (one cycle too late) + andi fix, ~(1 << 2) ;[23] + nop2 ;[16] + nop2 ;[18] +bit2IsSet: + ifrclr phase, USBMINUS ;[20] check phase only if D- changed + lpm ;[21] + in phase, USBIN ;[22] <- phase (one cycle too late) + ori shift, 1 << 2 ;[23] +bit3AfterSet: + st y+, data ;[24] +entryAfterSet: + ifioclr USBIN, USBMINUS ;[26] <--- sample 3 + rjmp bit3IsClr ;[27] + andi shift, ~(7 << 3) ;[28] + breq unstuff3s ;[29] + in phase, USBIN ;[30] <- phase + rjmp bit4AfterSet ;[31] +unstuff3s: + in phase, USBIN ;[31] <- phase (one cycle too late) + andi fix, ~(1 << 3) ;[32] + nop2 ;[25] + nop2 ;[27] +bit3IsClr: + ifrset phase, USBMINUS ;[29] check phase only if D- changed + lpm ;[30] + in phase, USBIN ;[31] <- phase (one cycle too late) + ori shift, 1 << 3 ;[32] +bit4AfterClr: + mov data, fix ;[33] undo this move by swapping defines +#undef fix +#define fix x1 +#undef data +#define data x2 + ifioset USBIN, USBMINUS ;[34] <--- sample 4 + rjmp bit4IsSet ;[35] + andi shift, ~(7 << 4) ;[36] + breq unstuff4c ;[37] + in phase, USBIN ;[38] <- phase + rjmp bit5AfterClr ;[39] +unstuff4c: + in phase, USBIN ;[39] <- phase (one cycle too late) + andi fix, ~(1 << 4) ;[40] + nop2 ;[33] + nop2 ;[35] +bit4IsSet: + ifrclr phase, USBMINUS ;[37] check phase only if D- changed + lpm ;[38] + in phase, USBIN ;[39] <- phase (one cycle too late) + ori shift, 1 << 4 ;[40] +bit5AfterSet: + ser data ;[41] + ifioclr USBIN, USBMINUS ;[42] <--- sample 5 + rjmp bit5IsClr ;[43] + andi shift, ~(7 << 5) ;[44] + breq unstuff5s ;[45] + in phase, USBIN ;[46] <- phase + rjmp bit6AfterSet ;[47] +unstuff5s: + in phase, USBIN ;[47] <- phase (one cycle too late) + andi fix, ~(1 << 5) ;[48] + nop2 ;[41] + nop2 ;[43] +bit5IsClr: + ifrset phase, USBMINUS ;[45] check phase only if D- changed + lpm ;[46] + in phase, USBIN ;[47] <- phase (one cycle too late) + ori shift, 1 << 5 ;[48] +bit6AfterClr: + subi cnt, 1 ;[49] + brcs overflow ;[50] + ifioset USBIN, USBMINUS ;[51] <--- sample 6 + rjmp bit6IsSet ;[52] + andi shift, ~(3 << 6) ;[53] + cpi shift, 2 ;[54] + in phase, USBIN ;[55] <- phase + brlt unstuff6c ;[56] + rjmp bit7AfterClr ;[57] +unstuff6c: + andi fix, ~(1 << 6) ;[50] + lpm ;[51] +bit6IsSet: + ifrclr phase, USBMINUS ;[54] check phase only if D- changed + lpm ;[55] + in phase, USBIN ;[56] <- phase (one cycle too late) + ori shift, 1 << 6 ;[57] +bit7AfterSet: + ifioclr USBIN, USBMINUS ;[59] <--- sample 7 + rjmp bit7IsClr ;[60] + andi shift, ~(1 << 7) ;[61] + cpi shift, 4 ;[62] + in phase, USBIN ;[63] <- phase + brlt unstuff7s ;[64] + rjmp bit0AfterSet ;[65] -> [00] == [67] +unstuff7s: + andi fix, ~(1 << 7) ;[58] + nop ;[59] + rjmp bit7IsClr ;[60] + +macro POP_STANDARD ; 14 cycles + pop r0 + pop cnt + pop x3 + pop x2 + pop x1 + pop shift + pop YH + endm +macro POP_RETI ; 5 cycles + pop YL + out SREG, YL + pop YL + endm + +#include "asmcommon.inc" + +;---------------------------------------------------------------------------- +; Transmitting data +;---------------------------------------------------------------------------- + +txByteLoop: +txBitloop: +stuffN1Delay: ; [03] + ror shift ;[-5] [11] [63] + brcc doExorN1 ;[-4] [64] + subi x3, 1 ;[-3] + brne commonN1 ;[-2] + lsl shift ;[-1] compensate ror after rjmp stuffDelay + nop ;[00] stuffing consists of just waiting 8 cycles + rjmp stuffN1Delay ;[01] after ror, C bit is reliably clear + +sendNakAndReti: + ldi cnt, USBPID_NAK ;[-19] + rjmp sendCntAndReti ;[-18] +sendAckAndReti: + ldi cnt, USBPID_ACK ;[-17] +sendCntAndReti: + mov r0, cnt ;[-16] + ldi YL, 0 ;[-15] R0 address is 0 + ldi YH, 0 ;[-14] + ldi cnt, 2 ;[-13] +; rjmp usbSendAndReti fallthrough + +; USB spec says: +; idle = J +; J = (D+ = 0), (D- = 1) or USBOUT = 0x01 +; K = (D+ = 1), (D- = 0) or USBOUT = 0x02 +; Spec allows 7.5 bit times from EOP to SOP for replies (= 60 cycles) + +;usbSend: +;pointer to data in 'Y' +;number of bytes in 'cnt' -- including sync byte +;uses: x1...x3, shift, cnt, Y [x1 = mirror USBOUT, x2 = USBMASK, x3 = bitstuff cnt] +;Numbers in brackets are time since first bit of sync pattern is sent (start of instruction) +usbSendAndReti: + in x2, USBDDR ;[-10] 10 cycles until SOP + ori x2, USBMASK ;[-9] + sbi USBOUT, USBMINUS ;[-8] prepare idle state; D+ and D- must have been 0 (no pullups) + out USBDDR, x2 ;[-6] <--- acquire bus + in x1, USBOUT ;[-5] port mirror for tx loop + ldi shift, 0x40 ;[-4] sync byte is first byte sent (we enter loop after ror) + ldi x2, USBMASK ;[-3] +doExorN1: + eor x1, x2 ;[-2] [06] [62] + ldi x3, 6 ;[-1] [07] [63] +commonN1: +stuffN2Delay: + out USBOUT, x1 ;[00] [08] [64] <--- set bit + ror shift ;[01] + brcc doExorN2 ;[02] + subi x3, 1 ;[03] + brne commonN2 ;[04] + lsl shift ;[05] compensate ror after rjmp stuffDelay + rjmp stuffN2Delay ;[06] after ror, C bit is reliably clear +doExorN2: + eor x1, x2 ;[04] [12] + ldi x3, 6 ;[05] [13] +commonN2: + nop2 ;[06] [14] + subi cnt, 171 ;[08] [16] trick: (3 * 171) & 0xff = 1 + out USBOUT, x1 ;[09] [17] <--- set bit + brcs txBitloop ;[10] [27] [44] + +stuff6Delay: + ror shift ;[45] [53] + brcc doExor6 ;[46] + subi x3, 1 ;[47] + brne common6 ;[48] + lsl shift ;[49] compensate ror after rjmp stuffDelay + nop ;[50] stuffing consists of just waiting 8 cycles + rjmp stuff6Delay ;[51] after ror, C bit is reliably clear +doExor6: + eor x1, x2 ;[48] [56] + ldi x3, 6 ;[49] +common6: +stuff7Delay: + ror shift ;[50] [58] + out USBOUT, x1 ;[51] <--- set bit + brcc doExor7 ;[52] + subi x3, 1 ;[53] + brne common7 ;[54] + lsl shift ;[55] compensate ror after rjmp stuffDelay + rjmp stuff7Delay ;[56] after ror, C bit is reliably clear +doExor7: + eor x1, x2 ;[54] [62] + ldi x3, 6 ;[55] +common7: + ld shift, y+ ;[56] + nop ;[58] + tst cnt ;[59] + out USBOUT, x1 ;[60] [00]<--- set bit + brne txByteLoop ;[61] [01] +;make SE0: + cbr x1, USBMASK ;[02] prepare SE0 [spec says EOP may be 15 to 18 cycles] + lds x2, usbNewDeviceAddr;[03] + lsl x2 ;[05] we compare with left shifted address + subi YL, 2 + 0 ;[06] Only assign address on data packets, not ACK/NAK in r0 + sbci YH, 0 ;[07] + out USBOUT, x1 ;[00] <-- out SE0 -- from now 2 bits = 16 cycles until bus idle +;2006-03-06: moved transfer of new address to usbDeviceAddr from C-Code to asm: +;set address only after data packet was sent, not after handshake + breq skipAddrAssign ;[01] + sts usbDeviceAddr, x2 ; if not skipped: SE0 is one cycle longer +skipAddrAssign: +;end of usbDeviceAddress transfer + ldi x2, 1< 0) + echo "$s\n"; + } +} + +function printBit($isAfterSet, $bitNum) +{ + ob_start(); + if($isAfterSet){ +?> + ifioclr USBIN, USBMINUS ;[00] <--- sample + rjmp bit#IsClr ;[01] + andi shift, ~(7 << #) ;[02] + breq unstuff#s ;[03] + in phase, USBIN ;[04] <- phase + rjmp bit@AfterSet ;[05] +unstuff#s: + in phase, USBIN ;[05] <- phase (one cycle too late) + andi fix, ~(1 << #) ;[06] + nop2 ;[-1] + nop2 ;[01] +bit#IsClr: + ifrset phase, USBMINUS ;[03] check phase only if D- changed + lpm ;[04] + in phase, USBIN ;[05] <- phase (one cycle too late) + ori shift, 1 << # ;[06] + + ifioset USBIN, USBMINUS ;[00] <--- sample + rjmp bit#IsSet ;[01] + andi shift, ~(7 << #) ;[02] + breq unstuff#c ;[03] + in phase, USBIN ;[04] <- phase + rjmp bit@AfterClr ;[05] +unstuff#c: + in phase, USBIN ;[05] <- phase (one cycle too late) + andi fix, ~(1 << #) ;[06] + nop2 ;[-1] + nop2 ;[01] +bit#IsSet: + ifrclr phase, USBMINUS ;[03] check phase only if D- changed + lpm ;[04] + in phase, USBIN ;[05] <- phase (one cycle too late) + ori shift, 1 << # ;[06] + +*****************************************************************************/ diff --git a/usbdrv/usbdrvasm15.inc b/usbdrv/usbdrvasm15.inc new file mode 100644 index 000000000..401b7f8ff --- /dev/null +++ b/usbdrv/usbdrvasm15.inc @@ -0,0 +1,423 @@ +/* Name: usbdrvasm15.inc + * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers + * Author: contributed by V. Bosch + * Creation Date: 2007-08-06 + * Tabsize: 4 + * Copyright: (c) 2007 by OBJECTIVE DEVELOPMENT Software GmbH + * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) + * Revision: $Id: usbdrvasm15.inc 740 2009-04-13 18:23:31Z cs $ + */ + +/* Do not link this file! Link usbdrvasm.S instead, which includes the + * appropriate implementation! + */ + +/* +General Description: +This file is the 15 MHz version of the asssembler part of the USB driver. It +requires a 15 MHz crystal (not a ceramic resonator and not a calibrated RC +oscillator). + +See usbdrv.h for a description of the entire driver. + +Since almost all of this code is timing critical, don't change unless you +really know what you are doing! Many parts require not only a maximum number +of CPU cycles, but even an exact number of cycles! +*/ + +;max stack usage: [ret(2), YL, SREG, YH, bitcnt, shift, x1, x2, x3, x4, cnt] = 12 bytes +;nominal frequency: 15 MHz -> 10.0 cycles per bit, 80.0 cycles per byte +; Numbers in brackets are clocks counted from center of last sync bit +; when instruction starts + +;---------------------------------------------------------------------------- +; order of registers pushed: +; YL, SREG [sofError] YH, shift, x1, x2, x3, bitcnt, cnt, x4 +;---------------------------------------------------------------------------- +USB_INTR_VECTOR: + push YL ;2 push only what is necessary to sync with edge ASAP + in YL, SREG ;1 + push YL ;2 +;---------------------------------------------------------------------------- +; Synchronize with sync pattern: +; +; sync byte (D-) pattern LSb to MSb: 01010100 [1 = idle = J, 0 = K] +; sync up with J to K edge during sync pattern -- use fastest possible loops +;The first part waits at most 1 bit long since we must be in sync pattern. +;YL is guarenteed to be < 0x80 because I flag is clear. When we jump to +;waitForJ, ensure that this prerequisite is met. +waitForJ: + inc YL + sbis USBIN, USBMINUS + brne waitForJ ; just make sure we have ANY timeout +;------------------------------------------------------------------------------- +; The following code results in a sampling window of < 1/4 bit +; which meets the spec. +;------------------------------------------------------------------------------- +waitForK: ;- + sbis USBIN, USBMINUS ;1 [00] <-- sample + rjmp foundK ;2 [01] + sbis USBIN, USBMINUS ; <-- sample + rjmp foundK + sbis USBIN, USBMINUS ; <-- sample + rjmp foundK + sbis USBIN, USBMINUS ; <-- sample + rjmp foundK + sbis USBIN, USBMINUS ; <-- sample + rjmp foundK + sbis USBIN, USBMINUS ; <-- sample + rjmp foundK +#if USB_COUNT_SOF + lds YL, usbSofCount + inc YL + sts usbSofCount, YL +#endif /* USB_COUNT_SOF */ +#ifdef USB_SOF_HOOK + USB_SOF_HOOK +#endif + rjmp sofError +;------------------------------------------------------------------------------ +; {3, 5} after falling D- edge, average delay: 4 cycles [we want 5 for +; center sampling] +; we have 1 bit time for setup purposes, then sample again. +; Numbers in brackets are cycles from center of first sync (double K) +; bit after the instruction +;------------------------------------------------------------------------------ +foundK: ;- [02] + lds YL, usbInputBufOffset;2 [03+04] tx loop + push YH ;2 [05+06] + clr YH ;1 [07] + subi YL, lo8(-(usbRxBuf)) ;1 [08] [rx loop init] + sbci YH, hi8(-(usbRxBuf)) ;1 [09] [rx loop init] + push shift ;2 [10+11] + ser shift ;1 [12] + sbis USBIN, USBMINUS ;1 [-1] [13] <--sample:we want two bits K (sample 1 cycle too early) + rjmp haveTwoBitsK ;2 [00] [14] + pop shift ;2 [15+16] undo the push from before + pop YH ;2 [17+18] undo the push from before + rjmp waitForK ;2 [19+20] this was not the end of sync, retry +; The entire loop from waitForK until rjmp waitForK above must not exceed two +; bit times (= 20 cycles). + +;---------------------------------------------------------------------------- +; push more registers and initialize values while we sample the first bits: +;---------------------------------------------------------------------------- +haveTwoBitsK: ;- [01] + push x1 ;2 [02+03] + push x2 ;2 [04+05] + push x3 ;2 [06+07] + push bitcnt ;2 [08+09] + in x1, USBIN ;1 [00] [10] <-- sample bit 0 + bst x1, USBMINUS ;1 [01] + bld shift, 0 ;1 [02] + push cnt ;2 [03+04] + ldi cnt, USB_BUFSIZE ;1 [05] + push x4 ;2 [06+07] tx loop + rjmp rxLoop ;2 [08] +;---------------------------------------------------------------------------- +; Receiver loop (numbers in brackets are cycles within byte after instr) +;---------------------------------------------------------------------------- +unstuff0: ;- [07] (branch taken) + andi x3, ~0x01 ;1 [08] + mov x1, x2 ;1 [09] x2 contains last sampled (stuffed) bit + in x2, USBIN ;1 [00] [10] <-- sample bit 1 again + andi x2, USBMASK ;1 [01] + breq se0Hop ;1 [02] SE0 check for bit 1 + ori shift, 0x01 ;1 [03] 0b00000001 + nop ;1 [04] + rjmp didUnstuff0 ;2 [05] +;----------------------------------------------------- +unstuff1: ;- [05] (branch taken) + mov x2, x1 ;1 [06] x1 contains last sampled (stuffed) bit + andi x3, ~0x02 ;1 [07] + ori shift, 0x02 ;1 [08] 0b00000010 + nop ;1 [09] + in x1, USBIN ;1 [00] [10] <-- sample bit 2 again + andi x1, USBMASK ;1 [01] + breq se0Hop ;1 [02] SE0 check for bit 2 + rjmp didUnstuff1 ;2 [03] +;----------------------------------------------------- +unstuff2: ;- [05] (branch taken) + andi x3, ~0x04 ;1 [06] + ori shift, 0x04 ;1 [07] 0b00000100 + mov x1, x2 ;1 [08] x2 contains last sampled (stuffed) bit + nop ;1 [09] + in x2, USBIN ;1 [00] [10] <-- sample bit 3 + andi x2, USBMASK ;1 [01] + breq se0Hop ;1 [02] SE0 check for bit 3 + rjmp didUnstuff2 ;2 [03] +;----------------------------------------------------- +unstuff3: ;- [00] [10] (branch taken) + in x2, USBIN ;1 [01] [11] <-- sample stuffed bit 3 one cycle too late + andi x2, USBMASK ;1 [02] + breq se0Hop ;1 [03] SE0 check for stuffed bit 3 + andi x3, ~0x08 ;1 [04] + ori shift, 0x08 ;1 [05] 0b00001000 + rjmp didUnstuff3 ;2 [06] +;---------------------------------------------------------------------------- +; extra jobs done during bit interval: +; +; bit 0: store, clear [SE0 is unreliable here due to bit dribbling in hubs], +; overflow check, jump to the head of rxLoop +; bit 1: SE0 check +; bit 2: SE0 check, recovery from delay [bit 0 tasks took too long] +; bit 3: SE0 check, recovery from delay [bit 0 tasks took too long] +; bit 4: SE0 check, none +; bit 5: SE0 check, none +; bit 6: SE0 check, none +; bit 7: SE0 check, reconstruct: x3 is 0 at bit locations we changed, 1 at others +;---------------------------------------------------------------------------- +rxLoop: ;- [09] + in x2, USBIN ;1 [00] [10] <-- sample bit 1 (or possibly bit 0 stuffed) + andi x2, USBMASK ;1 [01] + brne SkipSe0Hop ;1 [02] +se0Hop: ;- [02] + rjmp se0 ;2 [03] SE0 check for bit 1 +SkipSe0Hop: ;- [03] + ser x3 ;1 [04] + andi shift, 0xf9 ;1 [05] 0b11111001 + breq unstuff0 ;1 [06] +didUnstuff0: ;- [06] + eor x1, x2 ;1 [07] + bst x1, USBMINUS ;1 [08] + bld shift, 1 ;1 [09] + in x1, USBIN ;1 [00] [10] <-- sample bit 2 (or possibly bit 1 stuffed) + andi x1, USBMASK ;1 [01] + breq se0Hop ;1 [02] SE0 check for bit 2 + andi shift, 0xf3 ;1 [03] 0b11110011 + breq unstuff1 ;1 [04] do remaining work for bit 1 +didUnstuff1: ;- [04] + eor x2, x1 ;1 [05] + bst x2, USBMINUS ;1 [06] + bld shift, 2 ;1 [07] + nop2 ;2 [08+09] + in x2, USBIN ;1 [00] [10] <-- sample bit 3 (or possibly bit 2 stuffed) + andi x2, USBMASK ;1 [01] + breq se0Hop ;1 [02] SE0 check for bit 3 + andi shift, 0xe7 ;1 [03] 0b11100111 + breq unstuff2 ;1 [04] +didUnstuff2: ;- [04] + eor x1, x2 ;1 [05] + bst x1, USBMINUS ;1 [06] + bld shift, 3 ;1 [07] +didUnstuff3: ;- [07] + andi shift, 0xcf ;1 [08] 0b11001111 + breq unstuff3 ;1 [09] + in x1, USBIN ;1 [00] [10] <-- sample bit 4 + andi x1, USBMASK ;1 [01] + breq se0Hop ;1 [02] SE0 check for bit 4 + eor x2, x1 ;1 [03] + bst x2, USBMINUS ;1 [04] + bld shift, 4 ;1 [05] +didUnstuff4: ;- [05] + andi shift, 0x9f ;1 [06] 0b10011111 + breq unstuff4 ;1 [07] + nop2 ;2 [08+09] + in x2, USBIN ;1 [00] [10] <-- sample bit 5 + andi x2, USBMASK ;1 [01] + breq se0 ;1 [02] SE0 check for bit 5 + eor x1, x2 ;1 [03] + bst x1, USBMINUS ;1 [04] + bld shift, 5 ;1 [05] +didUnstuff5: ;- [05] + andi shift, 0x3f ;1 [06] 0b00111111 + breq unstuff5 ;1 [07] + nop2 ;2 [08+09] + in x1, USBIN ;1 [00] [10] <-- sample bit 6 + andi x1, USBMASK ;1 [01] + breq se0 ;1 [02] SE0 check for bit 6 + eor x2, x1 ;1 [03] + bst x2, USBMINUS ;1 [04] + bld shift, 6 ;1 [05] +didUnstuff6: ;- [05] + cpi shift, 0x02 ;1 [06] 0b00000010 + brlo unstuff6 ;1 [07] + nop2 ;2 [08+09] + in x2, USBIN ;1 [00] [10] <-- sample bit 7 + andi x2, USBMASK ;1 [01] + breq se0 ;1 [02] SE0 check for bit 7 + eor x1, x2 ;1 [03] + bst x1, USBMINUS ;1 [04] + bld shift, 7 ;1 [05] +didUnstuff7: ;- [05] + cpi shift, 0x04 ;1 [06] 0b00000100 + brlo unstuff7 ;1 [07] + eor x3, shift ;1 [08] reconstruct: x3 is 0 at bit locations we changed, 1 at others + nop ;1 [09] + in x1, USBIN ;1 [00] [10] <-- sample bit 0 + st y+, x3 ;2 [01+02] store data + eor x2, x1 ;1 [03] + bst x2, USBMINUS ;1 [04] + bld shift, 0 ;1 [05] + subi cnt, 1 ;1 [06] + brcs overflow ;1 [07] + rjmp rxLoop ;2 [08] +;----------------------------------------------------- +unstuff4: ;- [08] + andi x3, ~0x10 ;1 [09] + in x1, USBIN ;1 [00] [10] <-- sample stuffed bit 4 + andi x1, USBMASK ;1 [01] + breq se0 ;1 [02] SE0 check for stuffed bit 4 + ori shift, 0x10 ;1 [03] + rjmp didUnstuff4 ;2 [04] +;----------------------------------------------------- +unstuff5: ;- [08] + ori shift, 0x20 ;1 [09] + in x2, USBIN ;1 [00] [10] <-- sample stuffed bit 5 + andi x2, USBMASK ;1 [01] + breq se0 ;1 [02] SE0 check for stuffed bit 5 + andi x3, ~0x20 ;1 [03] + rjmp didUnstuff5 ;2 [04] +;----------------------------------------------------- +unstuff6: ;- [08] + andi x3, ~0x40 ;1 [09] + in x1, USBIN ;1 [00] [10] <-- sample stuffed bit 6 + andi x1, USBMASK ;1 [01] + breq se0 ;1 [02] SE0 check for stuffed bit 6 + ori shift, 0x40 ;1 [03] + rjmp didUnstuff6 ;2 [04] +;----------------------------------------------------- +unstuff7: ;- [08] + andi x3, ~0x80 ;1 [09] + in x2, USBIN ;1 [00] [10] <-- sample stuffed bit 7 + andi x2, USBMASK ;1 [01] + breq se0 ;1 [02] SE0 check for stuffed bit 7 + ori shift, 0x80 ;1 [03] + rjmp didUnstuff7 ;2 [04] + +macro POP_STANDARD ; 16 cycles + pop x4 + pop cnt + pop bitcnt + pop x3 + pop x2 + pop x1 + pop shift + pop YH + endm +macro POP_RETI ; 5 cycles + pop YL + out SREG, YL + pop YL + endm + +#include "asmcommon.inc" + +;--------------------------------------------------------------------------- +; USB spec says: +; idle = J +; J = (D+ = 0), (D- = 1) +; K = (D+ = 1), (D- = 0) +; Spec allows 7.5 bit times from EOP to SOP for replies +;--------------------------------------------------------------------------- +bitstuffN: ;- [04] + eor x1, x4 ;1 [05] + clr x2 ;1 [06] + nop ;1 [07] + rjmp didStuffN ;1 [08] +;--------------------------------------------------------------------------- +bitstuff6: ;- [04] + eor x1, x4 ;1 [05] + clr x2 ;1 [06] + rjmp didStuff6 ;1 [07] +;--------------------------------------------------------------------------- +bitstuff7: ;- [02] + eor x1, x4 ;1 [03] + clr x2 ;1 [06] + nop ;1 [05] + rjmp didStuff7 ;1 [06] +;--------------------------------------------------------------------------- +sendNakAndReti: ;- [-19] + ldi x3, USBPID_NAK ;1 [-18] + rjmp sendX3AndReti ;1 [-17] +;--------------------------------------------------------------------------- +sendAckAndReti: ;- [-17] + ldi cnt, USBPID_ACK ;1 [-16] +sendCntAndReti: ;- [-16] + mov x3, cnt ;1 [-15] +sendX3AndReti: ;- [-15] + ldi YL, 20 ;1 [-14] x3==r20 address is 20 + ldi YH, 0 ;1 [-13] + ldi cnt, 2 ;1 [-12] +; rjmp usbSendAndReti fallthrough +;--------------------------------------------------------------------------- +;usbSend: +;pointer to data in 'Y' +;number of bytes in 'cnt' -- including sync byte [range 2 ... 12] +;uses: x1...x4, btcnt, shift, cnt, Y +;Numbers in brackets are time since first bit of sync pattern is sent +;We need not to match the transfer rate exactly because the spec demands +;only 1.5% precision anyway. +usbSendAndReti: ;- [-13] 13 cycles until SOP + in x2, USBDDR ;1 [-12] + ori x2, USBMASK ;1 [-11] + sbi USBOUT, USBMINUS ;2 [-09-10] prepare idle state; D+ and D- must have been 0 (no pullups) + in x1, USBOUT ;1 [-08] port mirror for tx loop + out USBDDR, x2 ;1 [-07] <- acquire bus + ; need not init x2 (bitstuff history) because sync starts with 0 + ldi x4, USBMASK ;1 [-06] exor mask + ldi shift, 0x80 ;1 [-05] sync byte is first byte sent + ldi bitcnt, 6 ;1 [-04] +txBitLoop: ;- [-04] [06] + sbrs shift, 0 ;1 [-03] [07] + eor x1, x4 ;1 [-02] [08] + ror shift ;1 [-01] [09] +didStuffN: ;- [09] + out USBOUT, x1 ;1 [00] [10] <-- out N + ror x2 ;1 [01] + cpi x2, 0xfc ;1 [02] + brcc bitstuffN ;1 [03] + dec bitcnt ;1 [04] + brne txBitLoop ;1 [05] + sbrs shift, 0 ;1 [06] + eor x1, x4 ;1 [07] + ror shift ;1 [08] +didStuff6: ;- [08] + nop ;1 [09] + out USBOUT, x1 ;1 [00] [10] <-- out 6 + ror x2 ;1 [01] + cpi x2, 0xfc ;1 [02] + brcc bitstuff6 ;1 [03] + sbrs shift, 0 ;1 [04] + eor x1, x4 ;1 [05] + ror shift ;1 [06] + ror x2 ;1 [07] +didStuff7: ;- [07] + ldi bitcnt, 6 ;1 [08] + cpi x2, 0xfc ;1 [09] + out USBOUT, x1 ;1 [00] [10] <-- out 7 + brcc bitstuff7 ;1 [01] + ld shift, y+ ;2 [02+03] + dec cnt ;1 [04] + brne txBitLoop ;1 [05] +makeSE0: + cbr x1, USBMASK ;1 [06] prepare SE0 [spec says EOP may be 19 to 23 cycles] + lds x2, usbNewDeviceAddr;2 [07+08] + lsl x2 ;1 [09] we compare with left shifted address +;2006-03-06: moved transfer of new address to usbDeviceAddr from C-Code to asm: +;set address only after data packet was sent, not after handshake + out USBOUT, x1 ;1 [00] [10] <-- out SE0-- from now 2 bits==20 cycl. until bus idle + subi YL, 20 + 2 ;1 [01] Only assign address on data packets, not ACK/NAK in x3 + sbci YH, 0 ;1 [02] + breq skipAddrAssign ;1 [03] + sts usbDeviceAddr, x2 ;2 [04+05] if not skipped: SE0 is one cycle longer +;---------------------------------------------------------------------------- +;end of usbDeviceAddress transfer +skipAddrAssign: ;- [03/04] + ldi x2, 1< 10.6666666 cycles per bit, 85.333333333 cycles per byte +; Numbers in brackets are clocks counted from center of last sync bit +; when instruction starts + +USB_INTR_VECTOR: +;order of registers pushed: YL, SREG YH, [sofError], bitcnt, shift, x1, x2, x3, x4, cnt + push YL ;[-25] push only what is necessary to sync with edge ASAP + in YL, SREG ;[-23] + push YL ;[-22] + push YH ;[-20] +;---------------------------------------------------------------------------- +; Synchronize with sync pattern: +;---------------------------------------------------------------------------- +;sync byte (D-) pattern LSb to MSb: 01010100 [1 = idle = J, 0 = K] +;sync up with J to K edge during sync pattern -- use fastest possible loops +;The first part waits at most 1 bit long since we must be in sync pattern. +;YL is guarenteed to be < 0x80 because I flag is clear. When we jump to +;waitForJ, ensure that this prerequisite is met. +waitForJ: + inc YL + sbis USBIN, USBMINUS + brne waitForJ ; just make sure we have ANY timeout +waitForK: +;The following code results in a sampling window of < 1/4 bit which meets the spec. + sbis USBIN, USBMINUS ;[-15] + rjmp foundK ;[-14] + sbis USBIN, USBMINUS + rjmp foundK + sbis USBIN, USBMINUS + rjmp foundK + sbis USBIN, USBMINUS + rjmp foundK + sbis USBIN, USBMINUS + rjmp foundK + sbis USBIN, USBMINUS + rjmp foundK +#if USB_COUNT_SOF + lds YL, usbSofCount + inc YL + sts usbSofCount, YL +#endif /* USB_COUNT_SOF */ +#ifdef USB_SOF_HOOK + USB_SOF_HOOK +#endif + rjmp sofError +foundK: ;[-12] +;{3, 5} after falling D- edge, average delay: 4 cycles [we want 5 for center sampling] +;we have 1 bit time for setup purposes, then sample again. Numbers in brackets +;are cycles from center of first sync (double K) bit after the instruction + push bitcnt ;[-12] +; [---] ;[-11] + lds YL, usbInputBufOffset;[-10] +; [---] ;[-9] + clr YH ;[-8] + subi YL, lo8(-(usbRxBuf));[-7] [rx loop init] + sbci YH, hi8(-(usbRxBuf));[-6] [rx loop init] + push shift ;[-5] +; [---] ;[-4] + ldi bitcnt, 0x55 ;[-3] [rx loop init] + sbis USBIN, USBMINUS ;[-2] we want two bits K (sample 2 cycles too early) + rjmp haveTwoBitsK ;[-1] + pop shift ;[0] undo the push from before + pop bitcnt ;[2] undo the push from before + rjmp waitForK ;[4] this was not the end of sync, retry +; The entire loop from waitForK until rjmp waitForK above must not exceed two +; bit times (= 21 cycles). + +;---------------------------------------------------------------------------- +; push more registers and initialize values while we sample the first bits: +;---------------------------------------------------------------------------- +haveTwoBitsK: + push x1 ;[1] + push x2 ;[3] + push x3 ;[5] + ldi shift, 0 ;[7] + ldi x3, 1<<4 ;[8] [rx loop init] first sample is inverse bit, compensate that + push x4 ;[9] == leap + + in x1, USBIN ;[11] <-- sample bit 0 + andi x1, USBMASK ;[12] + bst x1, USBMINUS ;[13] + bld shift, 7 ;[14] + push cnt ;[15] + ldi leap, 0 ;[17] [rx loop init] + ldi cnt, USB_BUFSIZE;[18] [rx loop init] + rjmp rxbit1 ;[19] arrives at [21] + +;---------------------------------------------------------------------------- +; Receiver loop (numbers in brackets are cycles within byte after instr) +;---------------------------------------------------------------------------- + +; duration of unstuffing code should be 10.66666667 cycles. We adjust "leap" +; accordingly to approximate this value in the long run. + +unstuff6: + andi x2, USBMASK ;[03] + ori x3, 1<<6 ;[04] will not be shifted any more + andi shift, ~0x80;[05] + mov x1, x2 ;[06] sampled bit 7 is actually re-sampled bit 6 + subi leap, -1 ;[07] total duration = 11 bits -> subtract 1/3 + rjmp didUnstuff6 ;[08] + +unstuff7: + ori x3, 1<<7 ;[09] will not be shifted any more + in x2, USBIN ;[00] [10] re-sample bit 7 + andi x2, USBMASK ;[01] + andi shift, ~0x80;[02] + subi leap, 2 ;[03] total duration = 10 bits -> add 1/3 + rjmp didUnstuff7 ;[04] + +unstuffEven: + ori x3, 1<<6 ;[09] will be shifted right 6 times for bit 0 + in x1, USBIN ;[00] [10] + andi shift, ~0x80;[01] + andi x1, USBMASK ;[02] + breq se0 ;[03] + subi leap, -1 ;[04] total duration = 11 bits -> subtract 1/3 + nop2 ;[05] + rjmp didUnstuffE ;[06] + +unstuffOdd: + ori x3, 1<<5 ;[09] will be shifted right 4 times for bit 1 + in x2, USBIN ;[00] [10] + andi shift, ~0x80;[01] + andi x2, USBMASK ;[02] + breq se0 ;[03] + subi leap, -1 ;[04] total duration = 11 bits -> subtract 1/3 + nop2 ;[05] + rjmp didUnstuffO ;[06] + +rxByteLoop: + andi x1, USBMASK ;[03] + eor x2, x1 ;[04] + subi leap, 1 ;[05] + brpl skipLeap ;[06] + subi leap, -3 ;1 one leap cycle every 3rd byte -> 85 + 1/3 cycles per byte + nop ;1 +skipLeap: + subi x2, 1 ;[08] + ror shift ;[09] +didUnstuff6: + cpi shift, 0xfc ;[10] + in x2, USBIN ;[00] [11] <-- sample bit 7 + brcc unstuff6 ;[01] + andi x2, USBMASK ;[02] + eor x1, x2 ;[03] + subi x1, 1 ;[04] + ror shift ;[05] +didUnstuff7: + cpi shift, 0xfc ;[06] + brcc unstuff7 ;[07] + eor x3, shift ;[08] reconstruct: x3 is 1 at bit locations we changed, 0 at others + st y+, x3 ;[09] store data +rxBitLoop: + in x1, USBIN ;[00] [11] <-- sample bit 0/2/4 + andi x1, USBMASK ;[01] + eor x2, x1 ;[02] + andi x3, 0x3f ;[03] topmost two bits reserved for 6 and 7 + subi x2, 1 ;[04] + ror shift ;[05] + cpi shift, 0xfc ;[06] + brcc unstuffEven ;[07] +didUnstuffE: + lsr x3 ;[08] + lsr x3 ;[09] +rxbit1: + in x2, USBIN ;[00] [10] <-- sample bit 1/3/5 + andi x2, USBMASK ;[01] + breq se0 ;[02] + eor x1, x2 ;[03] + subi x1, 1 ;[04] + ror shift ;[05] + cpi shift, 0xfc ;[06] + brcc unstuffOdd ;[07] +didUnstuffO: + subi bitcnt, 0xab;[08] == addi 0x55, 0x55 = 0x100/3 + brcs rxBitLoop ;[09] + + subi cnt, 1 ;[10] + in x1, USBIN ;[00] [11] <-- sample bit 6 + brcc rxByteLoop ;[01] + rjmp overflow + +macro POP_STANDARD ; 14 cycles + pop cnt + pop x4 + pop x3 + pop x2 + pop x1 + pop shift + pop bitcnt + endm +macro POP_RETI ; 7 cycles + pop YH + pop YL + out SREG, YL + pop YL + endm + +#include "asmcommon.inc" + +; USB spec says: +; idle = J +; J = (D+ = 0), (D- = 1) +; K = (D+ = 1), (D- = 0) +; Spec allows 7.5 bit times from EOP to SOP for replies + +bitstuffN: + eor x1, x4 ;[5] + ldi x2, 0 ;[6] + nop2 ;[7] + nop ;[9] + out USBOUT, x1 ;[10] <-- out + rjmp didStuffN ;[0] + +bitstuff6: + eor x1, x4 ;[5] + ldi x2, 0 ;[6] Carry is zero due to brcc + rol shift ;[7] compensate for ror shift at branch destination + rjmp didStuff6 ;[8] + +bitstuff7: + ldi x2, 0 ;[2] Carry is zero due to brcc + rjmp didStuff7 ;[3] + + +sendNakAndReti: + ldi x3, USBPID_NAK ;[-18] + rjmp sendX3AndReti ;[-17] +sendAckAndReti: + ldi cnt, USBPID_ACK ;[-17] +sendCntAndReti: + mov x3, cnt ;[-16] +sendX3AndReti: + ldi YL, 20 ;[-15] x3==r20 address is 20 + ldi YH, 0 ;[-14] + ldi cnt, 2 ;[-13] +; rjmp usbSendAndReti fallthrough + +;usbSend: +;pointer to data in 'Y' +;number of bytes in 'cnt' -- including sync byte [range 2 ... 12] +;uses: x1...x4, btcnt, shift, cnt, Y +;Numbers in brackets are time since first bit of sync pattern is sent +;We don't match the transfer rate exactly (don't insert leap cycles every third +;byte) because the spec demands only 1.5% precision anyway. +usbSendAndReti: ; 12 cycles until SOP + in x2, USBDDR ;[-12] + ori x2, USBMASK ;[-11] + sbi USBOUT, USBMINUS;[-10] prepare idle state; D+ and D- must have been 0 (no pullups) + in x1, USBOUT ;[-8] port mirror for tx loop + out USBDDR, x2 ;[-7] <- acquire bus +; need not init x2 (bitstuff history) because sync starts with 0 + ldi x4, USBMASK ;[-6] exor mask + ldi shift, 0x80 ;[-5] sync byte is first byte sent +txByteLoop: + ldi bitcnt, 0x35 ;[-4] [6] binary 0011 0101 +txBitLoop: + sbrs shift, 0 ;[-3] [7] + eor x1, x4 ;[-2] [8] + out USBOUT, x1 ;[-1] [9] <-- out N + ror shift ;[0] [10] + ror x2 ;[1] +didStuffN: + cpi x2, 0xfc ;[2] + brcc bitstuffN ;[3] + lsr bitcnt ;[4] + brcc txBitLoop ;[5] + brne txBitLoop ;[6] + + sbrs shift, 0 ;[7] + eor x1, x4 ;[8] +didStuff6: + out USBOUT, x1 ;[-1] [9] <-- out 6 + ror shift ;[0] [10] + ror x2 ;[1] + cpi x2, 0xfc ;[2] + brcc bitstuff6 ;[3] + ror shift ;[4] +didStuff7: + ror x2 ;[5] + sbrs x2, 7 ;[6] + eor x1, x4 ;[7] + nop ;[8] + cpi x2, 0xfc ;[9] + out USBOUT, x1 ;[-1][10] <-- out 7 + brcc bitstuff7 ;[0] [11] + ld shift, y+ ;[1] + dec cnt ;[3] + brne txByteLoop ;[4] +;make SE0: + cbr x1, USBMASK ;[5] prepare SE0 [spec says EOP may be 21 to 25 cycles] + lds x2, usbNewDeviceAddr;[6] + lsl x2 ;[8] we compare with left shifted address + subi YL, 20 + 2 ;[9] Only assign address on data packets, not ACK/NAK in x3 + sbci YH, 0 ;[10] + out USBOUT, x1 ;[11] <-- out SE0 -- from now 2 bits = 22 cycles until bus idle +;2006-03-06: moved transfer of new address to usbDeviceAddr from C-Code to asm: +;set address only after data packet was sent, not after handshake + breq skipAddrAssign ;[0] + sts usbDeviceAddr, x2; if not skipped: SE0 is one cycle longer +skipAddrAssign: +;end of usbDeviceAddress transfer + ldi x2, 1< max 52 cycles interrupt disable +;max stack usage: [ret(2), r0, SREG, YL, YH, shift, x1, x2, x3, x4, cnt] = 12 bytes +;nominal frequency: 16.5 MHz -> 11 cycles per bit +; 16.3125 MHz < F_CPU < 16.6875 MHz (+/- 1.1%) +; Numbers in brackets are clocks counted from center of last sync bit +; when instruction starts + + +USB_INTR_VECTOR: +;order of registers pushed: YL, SREG [sofError], r0, YH, shift, x1, x2, x3, x4, cnt + push YL ;[-23] push only what is necessary to sync with edge ASAP + in YL, SREG ;[-21] + push YL ;[-20] +;---------------------------------------------------------------------------- +; Synchronize with sync pattern: +;---------------------------------------------------------------------------- +;sync byte (D-) pattern LSb to MSb: 01010100 [1 = idle = J, 0 = K] +;sync up with J to K edge during sync pattern -- use fastest possible loops +;The first part waits at most 1 bit long since we must be in sync pattern. +;YL is guarenteed to be < 0x80 because I flag is clear. When we jump to +;waitForJ, ensure that this prerequisite is met. +waitForJ: + inc YL + sbis USBIN, USBMINUS + brne waitForJ ; just make sure we have ANY timeout +waitForK: +;The following code results in a sampling window of < 1/4 bit which meets the spec. + sbis USBIN, USBMINUS ;[-15] + rjmp foundK ;[-14] + sbis USBIN, USBMINUS + rjmp foundK + sbis USBIN, USBMINUS + rjmp foundK + sbis USBIN, USBMINUS + rjmp foundK + sbis USBIN, USBMINUS + rjmp foundK + sbis USBIN, USBMINUS + rjmp foundK +#if USB_COUNT_SOF + lds YL, usbSofCount + inc YL + sts usbSofCount, YL +#endif /* USB_COUNT_SOF */ +#ifdef USB_SOF_HOOK + USB_SOF_HOOK +#endif + rjmp sofError +foundK: ;[-12] +;{3, 5} after falling D- edge, average delay: 4 cycles [we want 5 for center sampling] +;we have 1 bit time for setup purposes, then sample again. Numbers in brackets +;are cycles from center of first sync (double K) bit after the instruction + push r0 ;[-12] +; [---] ;[-11] + push YH ;[-10] +; [---] ;[-9] + lds YL, usbInputBufOffset;[-8] +; [---] ;[-7] + clr YH ;[-6] + subi YL, lo8(-(usbRxBuf));[-5] [rx loop init] + sbci YH, hi8(-(usbRxBuf));[-4] [rx loop init] + mov r0, x2 ;[-3] [rx loop init] + sbis USBIN, USBMINUS ;[-2] we want two bits K (sample 2 cycles too early) + rjmp haveTwoBitsK ;[-1] + pop YH ;[0] undo the pushes from before + pop r0 ;[2] + rjmp waitForK ;[4] this was not the end of sync, retry +; The entire loop from waitForK until rjmp waitForK above must not exceed two +; bit times (= 22 cycles). + +;---------------------------------------------------------------------------- +; push more registers and initialize values while we sample the first bits: +;---------------------------------------------------------------------------- +haveTwoBitsK: ;[1] + push shift ;[1] + push x1 ;[3] + push x2 ;[5] + push x3 ;[7] + ldi shift, 0xff ;[9] [rx loop init] + ori x3, 0xff ;[10] [rx loop init] == ser x3, clear zero flag + + in x1, USBIN ;[11] <-- sample bit 0 + bst x1, USBMINUS ;[12] + bld shift, 0 ;[13] + push x4 ;[14] == phase +; [---] ;[15] + push cnt ;[16] +; [---] ;[17] + ldi phase, 0 ;[18] [rx loop init] + ldi cnt, USB_BUFSIZE;[19] [rx loop init] + rjmp rxbit1 ;[20] +; [---] ;[21] + +;---------------------------------------------------------------------------- +; Receiver loop (numbers in brackets are cycles within byte after instr) +;---------------------------------------------------------------------------- +/* +byte oriented operations done during loop: +bit 0: store data +bit 1: SE0 check +bit 2: overflow check +bit 3: catch up +bit 4: rjmp to achieve conditional jump range +bit 5: PLL +bit 6: catch up +bit 7: jump, fixup bitstuff +; 87 [+ 2] cycles +------------------------------------------------------------------ +*/ +continueWithBit5: + in x2, USBIN ;[055] <-- bit 5 + eor r0, x2 ;[056] + or phase, r0 ;[057] + sbrc phase, USBMINUS ;[058] + lpm ;[059] optional nop3; modifies r0 + in phase, USBIN ;[060] <-- phase + eor x1, x2 ;[061] + bst x1, USBMINUS ;[062] + bld shift, 5 ;[063] + andi shift, 0x3f ;[064] + in x1, USBIN ;[065] <-- bit 6 + breq unstuff5 ;[066] *** unstuff escape + eor phase, x1 ;[067] + eor x2, x1 ;[068] + bst x2, USBMINUS ;[069] + bld shift, 6 ;[070] +didUnstuff6: ;[ ] + in r0, USBIN ;[071] <-- phase + cpi shift, 0x02 ;[072] + brlo unstuff6 ;[073] *** unstuff escape +didUnstuff5: ;[ ] + nop2 ;[074] +; [---] ;[075] + in x2, USBIN ;[076] <-- bit 7 + eor x1, x2 ;[077] + bst x1, USBMINUS ;[078] + bld shift, 7 ;[079] +didUnstuff7: ;[ ] + eor r0, x2 ;[080] + or phase, r0 ;[081] + in r0, USBIN ;[082] <-- phase + cpi shift, 0x04 ;[083] + brsh rxLoop ;[084] +; [---] ;[085] +unstuff7: ;[ ] + andi x3, ~0x80 ;[085] + ori shift, 0x80 ;[086] + in x2, USBIN ;[087] <-- sample stuffed bit 7 + nop ;[088] + rjmp didUnstuff7 ;[089] +; [---] ;[090] + ;[080] + +unstuff5: ;[067] + eor phase, x1 ;[068] + andi x3, ~0x20 ;[069] + ori shift, 0x20 ;[070] + in r0, USBIN ;[071] <-- phase + mov x2, x1 ;[072] + nop ;[073] + nop2 ;[074] +; [---] ;[075] + in x1, USBIN ;[076] <-- bit 6 + eor r0, x1 ;[077] + or phase, r0 ;[078] + eor x2, x1 ;[079] + bst x2, USBMINUS ;[080] + bld shift, 6 ;[081] no need to check bitstuffing, we just had one + in r0, USBIN ;[082] <-- phase + rjmp didUnstuff5 ;[083] +; [---] ;[084] + ;[074] + +unstuff6: ;[074] + andi x3, ~0x40 ;[075] + in x1, USBIN ;[076] <-- bit 6 again + ori shift, 0x40 ;[077] + nop2 ;[078] +; [---] ;[079] + rjmp didUnstuff6 ;[080] +; [---] ;[081] + ;[071] + +unstuff0: ;[013] + eor r0, x2 ;[014] + or phase, r0 ;[015] + andi x2, USBMASK ;[016] check for SE0 + in r0, USBIN ;[017] <-- phase + breq didUnstuff0 ;[018] direct jump to se0 would be too long + andi x3, ~0x01 ;[019] + ori shift, 0x01 ;[020] + mov x1, x2 ;[021] mov existing sample + in x2, USBIN ;[022] <-- bit 1 again + rjmp didUnstuff0 ;[023] +; [---] ;[024] + ;[014] + +unstuff1: ;[024] + eor r0, x1 ;[025] + or phase, r0 ;[026] + andi x3, ~0x02 ;[027] + in r0, USBIN ;[028] <-- phase + ori shift, 0x02 ;[029] + mov x2, x1 ;[030] + rjmp didUnstuff1 ;[031] +; [---] ;[032] + ;[022] + +unstuff2: ;[035] + eor r0, x2 ;[036] + or phase, r0 ;[037] + andi x3, ~0x04 ;[038] + in r0, USBIN ;[039] <-- phase + ori shift, 0x04 ;[040] + mov x1, x2 ;[041] + rjmp didUnstuff2 ;[042] +; [---] ;[043] + ;[033] + +unstuff3: ;[043] + in x2, USBIN ;[044] <-- bit 3 again + eor r0, x2 ;[045] + or phase, r0 ;[046] + andi x3, ~0x08 ;[047] + ori shift, 0x08 ;[048] + nop ;[049] + in r0, USBIN ;[050] <-- phase + rjmp didUnstuff3 ;[051] +; [---] ;[052] + ;[042] + +unstuff4: ;[053] + andi x3, ~0x10 ;[054] + in x1, USBIN ;[055] <-- bit 4 again + ori shift, 0x10 ;[056] + rjmp didUnstuff4 ;[057] +; [---] ;[058] + ;[048] + +rxLoop: ;[085] + eor x3, shift ;[086] reconstruct: x3 is 0 at bit locations we changed, 1 at others + in x1, USBIN ;[000] <-- bit 0 + st y+, x3 ;[001] +; [---] ;[002] + eor r0, x1 ;[003] + or phase, r0 ;[004] + eor x2, x1 ;[005] + in r0, USBIN ;[006] <-- phase + ser x3 ;[007] + bst x2, USBMINUS ;[008] + bld shift, 0 ;[009] + andi shift, 0xf9 ;[010] +rxbit1: ;[ ] + in x2, USBIN ;[011] <-- bit 1 + breq unstuff0 ;[012] *** unstuff escape + andi x2, USBMASK ;[013] SE0 check for bit 1 +didUnstuff0: ;[ ] Z only set if we detected SE0 in bitstuff + breq se0 ;[014] + eor r0, x2 ;[015] + or phase, r0 ;[016] + in r0, USBIN ;[017] <-- phase + eor x1, x2 ;[018] + bst x1, USBMINUS ;[019] + bld shift, 1 ;[020] + andi shift, 0xf3 ;[021] +didUnstuff1: ;[ ] + in x1, USBIN ;[022] <-- bit 2 + breq unstuff1 ;[023] *** unstuff escape + eor r0, x1 ;[024] + or phase, r0 ;[025] + subi cnt, 1 ;[026] overflow check + brcs overflow ;[027] + in r0, USBIN ;[028] <-- phase + eor x2, x1 ;[029] + bst x2, USBMINUS ;[030] + bld shift, 2 ;[031] + andi shift, 0xe7 ;[032] +didUnstuff2: ;[ ] + in x2, USBIN ;[033] <-- bit 3 + breq unstuff2 ;[034] *** unstuff escape + eor r0, x2 ;[035] + or phase, r0 ;[036] + eor x1, x2 ;[037] + bst x1, USBMINUS ;[038] + in r0, USBIN ;[039] <-- phase + bld shift, 3 ;[040] + andi shift, 0xcf ;[041] +didUnstuff3: ;[ ] + breq unstuff3 ;[042] *** unstuff escape + nop ;[043] + in x1, USBIN ;[044] <-- bit 4 + eor x2, x1 ;[045] + bst x2, USBMINUS ;[046] + bld shift, 4 ;[047] +didUnstuff4: ;[ ] + eor r0, x1 ;[048] + or phase, r0 ;[049] + in r0, USBIN ;[050] <-- phase + andi shift, 0x9f ;[051] + breq unstuff4 ;[052] *** unstuff escape + rjmp continueWithBit5;[053] +; [---] ;[054] + +macro POP_STANDARD ; 16 cycles + pop cnt + pop x4 + pop x3 + pop x2 + pop x1 + pop shift + pop YH + pop r0 + endm +macro POP_RETI ; 5 cycles + pop YL + out SREG, YL + pop YL + endm + +#include "asmcommon.inc" + + +; USB spec says: +; idle = J +; J = (D+ = 0), (D- = 1) +; K = (D+ = 1), (D- = 0) +; Spec allows 7.5 bit times from EOP to SOP for replies + +bitstuff7: + eor x1, x4 ;[4] + ldi x2, 0 ;[5] + nop2 ;[6] C is zero (brcc) + rjmp didStuff7 ;[8] + +bitstuffN: + eor x1, x4 ;[5] + ldi x2, 0 ;[6] + lpm ;[7] 3 cycle NOP, modifies r0 + out USBOUT, x1 ;[10] <-- out + rjmp didStuffN ;[0] + +#define bitStatus x3 + +sendNakAndReti: + ldi cnt, USBPID_NAK ;[-19] + rjmp sendCntAndReti ;[-18] +sendAckAndReti: + ldi cnt, USBPID_ACK ;[-17] +sendCntAndReti: + mov r0, cnt ;[-16] + ldi YL, 0 ;[-15] R0 address is 0 + ldi YH, 0 ;[-14] + ldi cnt, 2 ;[-13] +; rjmp usbSendAndReti fallthrough + +;usbSend: +;pointer to data in 'Y' +;number of bytes in 'cnt' -- including sync byte [range 2 ... 12] +;uses: x1...x4, shift, cnt, Y +;Numbers in brackets are time since first bit of sync pattern is sent +usbSendAndReti: ; 12 cycles until SOP + in x2, USBDDR ;[-12] + ori x2, USBMASK ;[-11] + sbi USBOUT, USBMINUS;[-10] prepare idle state; D+ and D- must have been 0 (no pullups) + in x1, USBOUT ;[-8] port mirror for tx loop + out USBDDR, x2 ;[-7] <- acquire bus +; need not init x2 (bitstuff history) because sync starts with 0 + ldi x4, USBMASK ;[-6] exor mask + ldi shift, 0x80 ;[-5] sync byte is first byte sent + ldi bitStatus, 0xff ;[-4] init bit loop counter, works for up to 12 bytes +byteloop: +bitloop: + sbrs shift, 0 ;[8] [-3] + eor x1, x4 ;[9] [-2] + out USBOUT, x1 ;[10] [-1] <-- out + ror shift ;[0] + ror x2 ;[1] +didStuffN: + cpi x2, 0xfc ;[2] + brcc bitstuffN ;[3] + nop ;[4] + subi bitStatus, 37 ;[5] 256 / 7 ~=~ 37 + brcc bitloop ;[6] when we leave the loop, bitStatus has almost the initial value + sbrs shift, 0 ;[7] + eor x1, x4 ;[8] + ror shift ;[9] +didStuff7: + out USBOUT, x1 ;[10] <-- out + ror x2 ;[0] + cpi x2, 0xfc ;[1] + brcc bitstuff7 ;[2] + ld shift, y+ ;[3] + dec cnt ;[5] + brne byteloop ;[6] +;make SE0: + cbr x1, USBMASK ;[7] prepare SE0 [spec says EOP may be 21 to 25 cycles] + lds x2, usbNewDeviceAddr;[8] + lsl x2 ;[10] we compare with left shifted address + out USBOUT, x1 ;[11] <-- out SE0 -- from now 2 bits = 22 cycles until bus idle +;2006-03-06: moved transfer of new address to usbDeviceAddr from C-Code to asm: +;set address only after data packet was sent, not after handshake + subi YL, 2 ;[0] Only assign address on data packets, not ACK/NAK in r0 + sbci YH, 0 ;[1] + breq skipAddrAssign ;[2] + sts usbDeviceAddr, x2; if not skipped: SE0 is one cycle longer +skipAddrAssign: +;end of usbDeviceAddress transfer + ldi x2, 1< 12 cycles per bit +; Numbers in brackets are clocks counted from center of last sync bit +; when instruction starts +;register use in receive loop to receive the data bytes: +; shift assembles the byte currently being received +; x1 holds the D+ and D- line state +; x2 holds the previous line state +; cnt holds the number of bytes left in the receive buffer +; x3 holds the higher crc byte (see algorithm below) +; x4 is used as temporary register for the crc algorithm +; x5 is used for unstuffing: when unstuffing the last received bit is inverted in shift (to prevent further +; unstuffing calls. In the same time the corresponding bit in x5 is cleared to mark the bit as beening iverted +; zl lower crc value and crc table index +; zh used for crc table accesses + +;-------------------------------------------------------------------------------------------------------------- +; CRC mods: +; table driven crc checker, Z points to table in prog space +; ZL is the lower crc byte, x3 is the higher crc byte +; x4 is used as temp register to store different results +; the initialization of the crc register is not 0xFFFF but 0xFE54. This is because during the receipt of the +; first data byte an virtual zero data byte is added to the crc register, this results in the correct initial +; value of 0xFFFF at beginning of the second data byte before the first data byte is added to the crc. +; The magic number 0xFE54 results form the crc table: At tabH[0x54] = 0xFF = crcH (required) and +; tabL[0x54] = 0x01 -> crcL = 0x01 xor 0xFE = 0xFF +; bitcnt is renamed to x5 and is used for unstuffing purposes, the unstuffing works like in the 12MHz version +;-------------------------------------------------------------------------------------------------------------- +; CRC algorithm: +; The crc register is formed by x3 (higher byte) and ZL (lower byte). The algorithm uses a 'reversed' form +; i.e. that it takes the least significant bit first and shifts to the right. So in fact the highest order +; bit seen from the polynomial devision point of view is the lsb of ZL. (If this sounds strange to you i +; propose a research on CRC :-) ) +; Each data byte received is xored to ZL, the lower crc byte. This byte now builds the crc +; table index. Next the new high byte is loaded from the table and stored in x4 until we have space in x3 +; (its destination). +; Afterwards the lower table is loaded from the table and stored in ZL (the old index is overwritten as +; we don't need it anymore. In fact this is a right shift by 8 bits.) Now the old crc high value is xored +; to ZL, this is the second shift of the old crc value. Now x4 (the temp reg) is moved to x3 and the crc +; calculation is done. +; Prior to the first byte the two CRC register have to be initialized to 0xFFFF (as defined in usb spec) +; however the crc engine also runs during the receipt of the first byte, therefore x3 and zl are initialized +; to a magic number which results in a crc value of 0xFFFF after the first complete byte. +; +; This algorithm is split into the extra cycles of the different bits: +; bit7: XOR the received byte to ZL +; bit5: load the new high byte to x4 +; bit6: load the lower xor byte from the table, xor zl and x3, store result in zl (=the new crc low value) +; move x4 (the new high byte) to x3, the crc value is ready +; + + +macro POP_STANDARD ; 18 cycles + pop ZH + pop ZL + pop cnt + pop x5 + pop x3 + pop x2 + pop x1 + pop shift + pop x4 + endm +macro POP_RETI ; 7 cycles + pop YH + pop YL + out SREG, YL + pop YL + endm + +macro CRC_CLEANUP_AND_CHECK + ; the last byte has already been xored with the lower crc byte, we have to do the table lookup and xor + ; x3 is the higher crc byte, zl the lower one + ldi ZH, hi8(usbCrcTableHigh);[+1] get the new high byte from the table + lpm x2, Z ;[+2][+3][+4] + ldi ZH, hi8(usbCrcTableLow);[+5] get the new low xor byte from the table + lpm ZL, Z ;[+6][+7][+8] + eor ZL, x3 ;[+7] xor the old high byte with the value from the table, x2:ZL now holds the crc value + cpi ZL, 0x01 ;[+8] if the crc is ok we have a fixed remainder value of 0xb001 in x2:ZL (see usb spec) + brne ignorePacket ;[+9] detected a crc fault -> paket is ignored and retransmitted by the host + cpi x2, 0xb0 ;[+10] + brne ignorePacket ;[+11] detected a crc fault -> paket is ignored and retransmitted by the host + endm + + +USB_INTR_VECTOR: +;order of registers pushed: YL, SREG, YH, [sofError], x4, shift, x1, x2, x3, x5, cnt, ZL, ZH + push YL ;[-28] push only what is necessary to sync with edge ASAP + in YL, SREG ;[-26] + push YL ;[-25] + push YH ;[-23] +;---------------------------------------------------------------------------- +; Synchronize with sync pattern: +;---------------------------------------------------------------------------- +;sync byte (D-) pattern LSb to MSb: 01010100 [1 = idle = J, 0 = K] +;sync up with J to K edge during sync pattern -- use fastest possible loops +;The first part waits at most 1 bit long since we must be in sync pattern. +;YL is guarenteed to be < 0x80 because I flag is clear. When we jump to +;waitForJ, ensure that this prerequisite is met. +waitForJ: + inc YL + sbis USBIN, USBMINUS + brne waitForJ ; just make sure we have ANY timeout +waitForK: +;The following code results in a sampling window of < 1/4 bit which meets the spec. + sbis USBIN, USBMINUS ;[-17] + rjmp foundK ;[-16] + sbis USBIN, USBMINUS + rjmp foundK + sbis USBIN, USBMINUS + rjmp foundK + sbis USBIN, USBMINUS + rjmp foundK + sbis USBIN, USBMINUS + rjmp foundK + sbis USBIN, USBMINUS + rjmp foundK + sbis USBIN, USBMINUS + rjmp foundK + sbis USBIN, USBMINUS + rjmp foundK + sbis USBIN, USBMINUS + rjmp foundK +#if USB_COUNT_SOF + lds YL, usbSofCount + inc YL + sts usbSofCount, YL +#endif /* USB_COUNT_SOF */ +#ifdef USB_SOF_HOOK + USB_SOF_HOOK +#endif + rjmp sofError +foundK: ;[-15] +;{3, 5} after falling D- edge, average delay: 4 cycles +;bit0 should be at 30 (2.5 bits) for center sampling. Currently at 4 so 26 cylces till bit 0 sample +;use 1 bit time for setup purposes, then sample again. Numbers in brackets +;are cycles from center of first sync (double K) bit after the instruction + push x4 ;[-14] +; [---] ;[-13] + lds YL, usbInputBufOffset;[-12] used to toggle the two usb receive buffers +; [---] ;[-11] + clr YH ;[-10] + subi YL, lo8(-(usbRxBuf));[-9] [rx loop init] + sbci YH, hi8(-(usbRxBuf));[-8] [rx loop init] + push shift ;[-7] +; [---] ;[-6] + ldi shift, 0x80 ;[-5] the last bit is the end of byte marker for the pid receiver loop + clc ;[-4] the carry has to be clear for receipt of pid bit 0 + sbis USBIN, USBMINUS ;[-3] we want two bits K (sample 3 cycles too early) + rjmp haveTwoBitsK ;[-2] + pop shift ;[-1] undo the push from before + pop x4 ;[1] + rjmp waitForK ;[3] this was not the end of sync, retry +; The entire loop from waitForK until rjmp waitForK above must not exceed two +; bit times (= 24 cycles). + +;---------------------------------------------------------------------------- +; push more registers and initialize values while we sample the first bits: +;---------------------------------------------------------------------------- +haveTwoBitsK: + push x1 ;[0] + push x2 ;[2] + push x3 ;[4] crc high byte + ldi x2, 1< jump back and store the byte + ori shift, 0x01 ;[11] invert the last received bit to prevent furhter unstuffing + in x2, USBIN ;[0] we have some free cycles so we could check for bit stuffing errors + andi x5, 0xFE ;[1] mark this bit as inverted (will be corrected before storing shift) + eor x1, x2 ;[2] x1 and x2 have to be different because the stuff bit is always a zero + andi x1, USBMASK ;[3] mask the interesting bits + breq stuffErr ;[4] if the stuff bit is a 1-bit something went wrong + mov x1, x2 ;[5] the next bit expects the last state to be in x1 + rjmp didunstuff0 ;[6] + ;[7] jump delay of rjmp didunstuffX + +unstuff1: ;[11] this is the jump delay of breq unstuffX + in x1, USBIN ;[0] we have some free cycles so we could check for bit stuffing errors + ori shift, 0x02 ;[1] invert the last received bit to prevent furhter unstuffing + andi x5, 0xFD ;[2] mark this bit as inverted (will be corrected before storing shift) + eor x2, x1 ;[3] x1 and x2 have to be different because the stuff bit is always a zero + andi x2, USBMASK ;[4] mask the interesting bits + breq stuffErr ;[5] if the stuff bit is a 1-bit something went wrong + mov x2, x1 ;[6] the next bit expects the last state to be in x2 + nop2 ;[7] + ;[8] + rjmp didunstuff1 ;[9] + ;[10] jump delay of rjmp didunstuffX + +unstuff2: ;[9] this is the jump delay of breq unstuffX + ori shift, 0x04 ;[10] invert the last received bit to prevent furhter unstuffing + andi x5, 0xFB ;[11] mark this bit as inverted (will be corrected before storing shift) + in x2, USBIN ;[0] we have some free cycles so we could check for bit stuffing errors + eor x1, x2 ;[1] x1 and x2 have to be different because the stuff bit is always a zero + andi x1, USBMASK ;[2] mask the interesting bits + breq stuffErr ;[3] if the stuff bit is a 1-bit something went wrong + mov x1, x2 ;[4] the next bit expects the last state to be in x1 + nop2 ;[5] + ;[6] + rjmp didunstuff2 ;[7] + ;[8] jump delay of rjmp didunstuffX + +unstuff3: ;[9] this is the jump delay of breq unstuffX + ori shift, 0x08 ;[10] invert the last received bit to prevent furhter unstuffing + andi x5, 0xF7 ;[11] mark this bit as inverted (will be corrected before storing shift) + in x1, USBIN ;[0] we have some free cycles so we could check for bit stuffing errors + eor x2, x1 ;[1] x1 and x2 have to be different because the stuff bit is always a zero + andi x2, USBMASK ;[2] mask the interesting bits + breq stuffErr ;[3] if the stuff bit is a 1-bit something went wrong + mov x2, x1 ;[4] the next bit expects the last state to be in x2 + nop2 ;[5] + ;[6] + rjmp didunstuff3 ;[7] + ;[8] jump delay of rjmp didunstuffX + + + +; the include has to be here due to branch distance restirctions +#define __USE_CRC__ +#include "asmcommon.inc" + + + +; USB spec says: +; idle = J +; J = (D+ = 0), (D- = 1) +; K = (D+ = 1), (D- = 0) +; Spec allows 7.5 bit times from EOP to SOP for replies +; 7.5 bit times is 90 cycles. ...there is plenty of time + + +sendNakAndReti: + ldi x3, USBPID_NAK ;[-18] + rjmp sendX3AndReti ;[-17] +sendAckAndReti: + ldi cnt, USBPID_ACK ;[-17] +sendCntAndReti: + mov x3, cnt ;[-16] +sendX3AndReti: + ldi YL, 20 ;[-15] x3==r20 address is 20 + ldi YH, 0 ;[-14] + ldi cnt, 2 ;[-13] +; rjmp usbSendAndReti fallthrough + +;usbSend: +;pointer to data in 'Y' +;number of bytes in 'cnt' -- including sync byte [range 2 ... 12] +;uses: x1...x4, btcnt, shift, cnt, Y +;Numbers in brackets are time since first bit of sync pattern is sent + +usbSendAndReti: ; 12 cycles until SOP + in x2, USBDDR ;[-12] + ori x2, USBMASK ;[-11] + sbi USBOUT, USBMINUS;[-10] prepare idle state; D+ and D- must have been 0 (no pullups) + in x1, USBOUT ;[-8] port mirror for tx loop + out USBDDR, x2 ;[-6] <- acquire bus + ldi x2, 0 ;[-6] init x2 (bitstuff history) because sync starts with 0 + ldi x4, USBMASK ;[-5] exor mask + ldi shift, 0x80 ;[-4] sync byte is first byte sent +txByteLoop: + ldi bitcnt, 0x40 ;[-3]=[9] binary 01000000 +txBitLoop: ; the loop sends the first 7 bits of the byte + sbrs shift, 0 ;[-2]=[10] if we have to send a 1 don't change the line state + eor x1, x4 ;[-1]=[11] + out USBOUT, x1 ;[0] + ror shift ;[1] + ror x2 ;[2] transfers the last sent bit to the stuffing history +didStuffN: + nop ;[3] + nop ;[4] + cpi x2, 0xfc ;[5] if we sent six consecutive ones + brcc bitstuffN ;[6] + lsr bitcnt ;[7] + brne txBitLoop ;[8] restart the loop while the 1 is still in the bitcount + +; transmit bit 7 + sbrs shift, 0 ;[9] + eor x1, x4 ;[10] +didStuff7: + ror shift ;[11] + out USBOUT, x1 ;[0] transfer bit 7 to the pins + ror x2 ;[1] move the bit into the stuffing history + cpi x2, 0xfc ;[2] + brcc bitstuff7 ;[3] + ld shift, y+ ;[4] get next byte to transmit + dec cnt ;[5] decrement byte counter + brne txByteLoop ;[7] if we have more bytes start next one + ;[8] branch delay + +;make SE0: + cbr x1, USBMASK ;[8] prepare SE0 [spec says EOP may be 25 to 30 cycles] + lds x2, usbNewDeviceAddr;[9] + lsl x2 ;[11] we compare with left shifted address + out USBOUT, x1 ;[0] <-- out SE0 -- from now 2 bits = 24 cycles until bus idle + subi YL, 20 + 2 ;[1] Only assign address on data packets, not ACK/NAK in x3 + sbci YH, 0 ;[2] +;2006-03-06: moved transfer of new address to usbDeviceAddr from C-Code to asm: +;set address only after data packet was sent, not after handshake + breq skipAddrAssign ;[3] + sts usbDeviceAddr, x2 ; if not skipped: SE0 is one cycle longer +skipAddrAssign: +;end of usbDeviceAddress transfer + ldi x2, 1< +int main (int argc, char **argv) +{ + int i, j; + for (i=0; i<512; i++){ + unsigned short crc = i & 0xff; + for(j=0; j<8; j++) crc = (crc >> 1) ^ ((crc & 1) ? 0xa001 : 0); + if((i & 7) == 0) printf("\n.byte "); + printf("0x%02x, ", (i > 0xff ? (crc >> 8) : crc) & 0xff); + if(i == 255) printf("\n"); + } + return 0; +} + +// Use the following algorithm to compute CRC values: +ushort computeCrc(uchar *msg, uchar msgLen) +{ + uchar i; + ushort crc = 0xffff; + for(i = 0; i < msgLen; i++) + crc = usbCrcTable16[lo8(crc) ^ msg[i]] ^ hi8(crc); + return crc; +} +*/ + +.balign 256 +usbCrcTableLow: +.byte 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41 +.byte 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40 +.byte 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40 +.byte 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41 +.byte 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40 +.byte 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41 +.byte 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41 +.byte 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40 +.byte 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40 +.byte 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41 +.byte 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41 +.byte 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40 +.byte 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41 +.byte 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40 +.byte 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40 +.byte 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41 +.byte 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40 +.byte 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41 +.byte 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41 +.byte 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40 +.byte 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41 +.byte 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40 +.byte 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40 +.byte 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41 +.byte 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41 +.byte 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40 +.byte 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40 +.byte 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41 +.byte 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40 +.byte 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41 +.byte 0x00, 0xC1, 0x81, 0x40, 0x01, 0xC0, 0x80, 0x41 +.byte 0x01, 0xC0, 0x80, 0x41, 0x00, 0xC1, 0x81, 0x40 + +; .balign 256 +usbCrcTableHigh: +.byte 0x00, 0xC0, 0xC1, 0x01, 0xC3, 0x03, 0x02, 0xC2 +.byte 0xC6, 0x06, 0x07, 0xC7, 0x05, 0xC5, 0xC4, 0x04 +.byte 0xCC, 0x0C, 0x0D, 0xCD, 0x0F, 0xCF, 0xCE, 0x0E +.byte 0x0A, 0xCA, 0xCB, 0x0B, 0xC9, 0x09, 0x08, 0xC8 +.byte 0xD8, 0x18, 0x19, 0xD9, 0x1B, 0xDB, 0xDA, 0x1A +.byte 0x1E, 0xDE, 0xDF, 0x1F, 0xDD, 0x1D, 0x1C, 0xDC +.byte 0x14, 0xD4, 0xD5, 0x15, 0xD7, 0x17, 0x16, 0xD6 +.byte 0xD2, 0x12, 0x13, 0xD3, 0x11, 0xD1, 0xD0, 0x10 +.byte 0xF0, 0x30, 0x31, 0xF1, 0x33, 0xF3, 0xF2, 0x32 +.byte 0x36, 0xF6, 0xF7, 0x37, 0xF5, 0x35, 0x34, 0xF4 +.byte 0x3C, 0xFC, 0xFD, 0x3D, 0xFF, 0x3F, 0x3E, 0xFE +.byte 0xFA, 0x3A, 0x3B, 0xFB, 0x39, 0xF9, 0xF8, 0x38 +.byte 0x28, 0xE8, 0xE9, 0x29, 0xEB, 0x2B, 0x2A, 0xEA +.byte 0xEE, 0x2E, 0x2F, 0xEF, 0x2D, 0xED, 0xEC, 0x2C +.byte 0xE4, 0x24, 0x25, 0xE5, 0x27, 0xE7, 0xE6, 0x26 +.byte 0x22, 0xE2, 0xE3, 0x23, 0xE1, 0x21, 0x20, 0xE0 +.byte 0xA0, 0x60, 0x61, 0xA1, 0x63, 0xA3, 0xA2, 0x62 +.byte 0x66, 0xA6, 0xA7, 0x67, 0xA5, 0x65, 0x64, 0xA4 +.byte 0x6C, 0xAC, 0xAD, 0x6D, 0xAF, 0x6F, 0x6E, 0xAE +.byte 0xAA, 0x6A, 0x6B, 0xAB, 0x69, 0xA9, 0xA8, 0x68 +.byte 0x78, 0xB8, 0xB9, 0x79, 0xBB, 0x7B, 0x7A, 0xBA +.byte 0xBE, 0x7E, 0x7F, 0xBF, 0x7D, 0xBD, 0xBC, 0x7C +.byte 0xB4, 0x74, 0x75, 0xB5, 0x77, 0xB7, 0xB6, 0x76 +.byte 0x72, 0xB2, 0xB3, 0x73, 0xB1, 0x71, 0x70, 0xB0 +.byte 0x50, 0x90, 0x91, 0x51, 0x93, 0x53, 0x52, 0x92 +.byte 0x96, 0x56, 0x57, 0x97, 0x55, 0x95, 0x94, 0x54 +.byte 0x9C, 0x5C, 0x5D, 0x9D, 0x5F, 0x9F, 0x9E, 0x5E +.byte 0x5A, 0x9A, 0x9B, 0x5B, 0x99, 0x59, 0x58, 0x98 +.byte 0x88, 0x48, 0x49, 0x89, 0x4B, 0x8B, 0x8A, 0x4A +.byte 0x4E, 0x8E, 0x8F, 0x4F, 0x8D, 0x4D, 0x4C, 0x8C +.byte 0x44, 0x84, 0x85, 0x45, 0x87, 0x47, 0x46, 0x86 +.byte 0x82, 0x42, 0x43, 0x83, 0x41, 0x81, 0x80, 0x40 + diff --git a/usbdrv/usbdrvasm20.inc b/usbdrv/usbdrvasm20.inc new file mode 100644 index 000000000..303abaf64 --- /dev/null +++ b/usbdrv/usbdrvasm20.inc @@ -0,0 +1,360 @@ +/* Name: usbdrvasm20.inc + * Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers + * Author: Jeroen Benschop + * Based on usbdrvasm16.inc from Christian Starkjohann + * Creation Date: 2008-03-05 + * Tabsize: 4 + * Copyright: (c) 2008 by Jeroen Benschop and OBJECTIVE DEVELOPMENT Software GmbH + * License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt) + * Revision: $Id: usbdrvasm20.inc 740 2009-04-13 18:23:31Z cs $ + */ + +/* Do not link this file! Link usbdrvasm.S instead, which includes the + * appropriate implementation! + */ + +/* +General Description: +This file is the 20 MHz version of the asssembler part of the USB driver. It +requires a 20 MHz crystal (not a ceramic resonator and not a calibrated RC +oscillator). + +See usbdrv.h for a description of the entire driver. + +Since almost all of this code is timing critical, don't change unless you +really know what you are doing! Many parts require not only a maximum number +of CPU cycles, but even an exact number of cycles! +*/ + +#define leap2 x3 +#ifdef __IAR_SYSTEMS_ASM__ +#define nextInst $+2 +#else +#define nextInst .+0 +#endif + +;max stack usage: [ret(2), YL, SREG, YH, bitcnt, shift, x1, x2, x3, x4, cnt] = 12 bytes +;nominal frequency: 20 MHz -> 13.333333 cycles per bit, 106.666667 cycles per byte +; Numbers in brackets are clocks counted from center of last sync bit +; when instruction starts +;register use in receive loop: +; shift assembles the byte currently being received +; x1 holds the D+ and D- line state +; x2 holds the previous line state +; x4 (leap) is used to add a leap cycle once every three bytes received +; X3 (leap2) is used to add a leap cycle once every three stuff bits received +; bitcnt is used to determine when a stuff bit is due +; cnt holds the number of bytes left in the receive buffer + +USB_INTR_VECTOR: +;order of registers pushed: YL, SREG YH, [sofError], bitcnt, shift, x1, x2, x3, x4, cnt + push YL ;[-28] push only what is necessary to sync with edge ASAP + in YL, SREG ;[-26] + push YL ;[-25] + push YH ;[-23] +;---------------------------------------------------------------------------- +; Synchronize with sync pattern: +;---------------------------------------------------------------------------- +;sync byte (D-) pattern LSb to MSb: 01010100 [1 = idle = J, 0 = K] +;sync up with J to K edge during sync pattern -- use fastest possible loops +;The first part waits at most 1 bit long since we must be in sync pattern. +;YL is guarenteed to be < 0x80 because I flag is clear. When we jump to +;waitForJ, ensure that this prerequisite is met. +waitForJ: + inc YL + sbis USBIN, USBMINUS + brne waitForJ ; just make sure we have ANY timeout +waitForK: +;The following code results in a sampling window of < 1/4 bit which meets the spec. + sbis USBIN, USBMINUS ;[-19] + rjmp foundK ;[-18] + sbis USBIN, USBMINUS + rjmp foundK + sbis USBIN, USBMINUS + rjmp foundK + sbis USBIN, USBMINUS + rjmp foundK + sbis USBIN, USBMINUS + rjmp foundK + sbis USBIN, USBMINUS + rjmp foundK + sbis USBIN, USBMINUS + rjmp foundK + sbis USBIN, USBMINUS + rjmp foundK + sbis USBIN, USBMINUS + rjmp foundK +#if USB_COUNT_SOF + lds YL, usbSofCount + inc YL + sts usbSofCount, YL +#endif /* USB_COUNT_SOF */ +#ifdef USB_SOF_HOOK + USB_SOF_HOOK +#endif + rjmp sofError +foundK: ;[-16] +;{3, 5} after falling D- edge, average delay: 4 cycles +;bit0 should be at 34 for center sampling. Currently at 4 so 30 cylces till bit 0 sample +;use 1 bit time for setup purposes, then sample again. Numbers in brackets +;are cycles from center of first sync (double K) bit after the instruction + push bitcnt ;[-16] +; [---] ;[-15] + lds YL, usbInputBufOffset;[-14] +; [---] ;[-13] + clr YH ;[-12] + subi YL, lo8(-(usbRxBuf));[-11] [rx loop init] + sbci YH, hi8(-(usbRxBuf));[-10] [rx loop init] + push shift ;[-9] +; [---] ;[-8] + ldi shift,0x40 ;[-7] set msb to "1" so processing bit7 can be detected + nop2 ;[-6] +; [---] ;[-5] + ldi bitcnt, 5 ;[-4] [rx loop init] + sbis USBIN, USBMINUS ;[-3] we want two bits K (sample 3 cycles too early) + rjmp haveTwoBitsK ;[-2] + pop shift ;[-1] undo the push from before + pop bitcnt ;[1] + rjmp waitForK ;[3] this was not the end of sync, retry +; The entire loop from waitForK until rjmp waitForK above must not exceed two +; bit times (= 27 cycles). + +;---------------------------------------------------------------------------- +; push more registers and initialize values while we sample the first bits: +;---------------------------------------------------------------------------- +haveTwoBitsK: + push x1 ;[0] + push x2 ;[2] + push x3 ;[4] (leap2) + ldi leap2, 0x55 ;[6] add leap cycle on 2nd,5th,8th,... stuff bit + push x4 ;[7] == leap + ldi leap, 0x55 ;[9] skip leap cycle on 2nd,5th,8th,... byte received + push cnt ;[10] + ldi cnt, USB_BUFSIZE ;[12] [rx loop init] + ldi x2, 1< +#ifndef __IAR_SYSTEMS_ASM__ +# include +#endif + +#define __attribute__(arg) /* not supported on IAR */ + +#ifdef __IAR_SYSTEMS_ASM__ +# define __ASSEMBLER__ /* IAR does not define standard macro for asm */ +#endif + +#ifdef __HAS_ELPM__ +# define PROGMEM __farflash +#else +# define PROGMEM __flash +#endif + +#define USB_READ_FLASH(addr) (*(PROGMEM char *)(addr)) + +/* The following definitions are not needed by the driver, but may be of some + * help if you port a gcc based project to IAR. + */ +#define cli() __disable_interrupt() +#define sei() __enable_interrupt() +#define wdt_reset() __watchdog_reset() +#define _BV(x) (1 << (x)) + +/* assembler compatibility macros */ +#define nop2 rjmp $+2 /* jump to next instruction */ +#define XL r26 +#define XH r27 +#define YL r28 +#define YH r29 +#define ZL r30 +#define ZH r31 +#define lo8(x) LOW(x) +#define hi8(x) (((x)>>8) & 0xff) /* not HIGH to allow XLINK to make a proper range check */ + +/* Depending on the device you use, you may get problems with the way usbdrv.h + * handles the differences between devices. Since IAR does not use #defines + * for MCU registers, we can't check for the existence of a particular + * register with an #ifdef. If the autodetection mechanism fails, include + * definitions for the required USB_INTR_* macros in your usbconfig.h. See + * usbconfig-prototype.h and usbdrv.h for details. + */ + +/* ------------------------------------------------------------------------- */ +#elif __CODEVISIONAVR__ /* check for CodeVision AVR */ +/* ------------------------------------------------------------------------- */ +/* This port is not working (yet) */ + +/* #define F_CPU _MCU_CLOCK_FREQUENCY_ seems to be defined automatically */ + +#include +#include + +#define __attribute__(arg) /* not supported on IAR */ + +#define PROGMEM __flash +#define USB_READ_FLASH(addr) (*(PROGMEM char *)(addr)) + +#ifndef __ASSEMBLER__ +static inline void cli(void) +{ + #asm("cli"); +} +static inline void sei(void) +{ + #asm("sei"); +} +#endif +#define _delay_ms(t) delay_ms(t) +#define _BV(x) (1 << (x)) +#define USB_CFG_USE_SWITCH_STATEMENT 1 /* macro for if() cascase fails for unknown reason */ + +#define macro .macro +#define endm .endmacro +#define nop2 rjmp .+0 /* jump to next instruction */ + +/* ------------------------------------------------------------------------- */ +#else /* default development environment is avr-gcc/avr-libc */ +/* ------------------------------------------------------------------------- */ + +#include +#ifdef __ASSEMBLER__ +# define _VECTOR(N) __vector_ ## N /* io.h does not define this for asm */ +#else +# include +#endif + +#if USB_CFG_DRIVER_FLASH_PAGE +# define USB_READ_FLASH(addr) pgm_read_byte_far(((long)USB_CFG_DRIVER_FLASH_PAGE << 16) | (long)(addr)) +#else +# define USB_READ_FLASH(addr) pgm_read_byte(addr) +#endif + +#define macro .macro +#define endm .endm +#define nop2 rjmp .+0 /* jump to next instruction */ + +#endif /* development environment */ + +/* for conveniecne, ensure that PRG_RDB exists */ +#ifndef PRG_RDB +# define PRG_RDB(addr) USB_READ_FLASH(addr) +#endif +#endif /* __usbportability_h_INCLUDED__ */