Adding new pcb with default keymap and personal keymap (#7314)
* adding new pcb with default keymap and personal keymap * Update keyboards/leeku/finger65/readme.md Co-Authored-By: fauxpark <fauxpark@gmail.com> * Change to newer DEBOUNCE format Co-Authored-By: fauxpark <fauxpark@gmail.com> * switch to pragma Co-Authored-By: fauxpark <fauxpark@gmail.com> * remove unused define keyboards/leeku/finger65/config.h Co-Authored-By: fauxpark <fauxpark@gmail.com> * some cleanup after debounce and other changes * Remove no_suspend_power_down from keyboards/leeku/finger65/rules.mk Co-Authored-By: fauxpark <fauxpark@gmail.com> * move to newer format and remove unused stuff * ensure default has no leds for now * change default layout name * clean up the keymap a bit * want grave not tilde * a minor change and cleanup * more stuff removed cause I don't care for LEDs * remove some remaining stuff * add RGBLED stuff * Update keyboards/leeku/finger65/usbconfig.h Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/leeku/finger65/usbconfig.h Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/leeku/finger65/usbconfig.h Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/leeku/finger65/usbconfig.h Co-Authored-By: fauxpark <fauxpark@gmail.com> * update USB information * Update keyboards/leeku/finger65/usbconfig.h Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/leeku/finger65/rules.mk Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/leeku/finger65/rules.mk Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/leeku/finger65/rules.mk Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/leeku/finger65/rules.mk Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/leeku/finger65/keymaps/default/keymap.c Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/leeku/finger65/keymaps/default/keymap.c Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/leeku/finger65/keymaps/madhatter/keymap.c Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/leeku/finger65/keymaps/madhatter/keymap.c Co-Authored-By: fauxpark <fauxpark@gmail.com> * cleanup and conform to existing standard * Update keyboards/leeku/finger65/rules.mk Co-Authored-By: fauxpark <fauxpark@gmail.com> * remove stuff that doesn't work * add a JSON for the QMK configurator * list the layouts only available * let's just make it the 65 ansi layout with split backspace, eh? * remove extra space * Update keyboards/leeku/finger65/readme.md Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/leeku/finger65/readme.md Co-Authored-By: fauxpark <fauxpark@gmail.com> * update readme * remove redundant title * Monica Bellucci ruined my life * I'm having a RELIGIOUS EXPERIENCE ... and I don't take any DRUGS * Update keyboards/leeku/finger65/rules.mk Co-Authored-By: fauxpark <fauxpark@gmail.com> * add a URL to the username * fix readme and make it simpler with links this time * Update keyboards/leeku/finger65/readme.md Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/leeku/finger65/readme.md Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * incorporate suggested changes * update usb stuff for some stuff coming in the future * update layout for LAYOUT_ALL * USB power changesmaster
Sid Carter
fauxpark
parent
f98750de6e
commit
43889326fc
|
|
@ -0,0 +1,45 @@
|
||||||
|
/*
|
||||||
|
Copyright 2018 Rasmus Schults <rasmusx@gmail.com>
|
||||||
|
|
||||||
|
This program is free software: you can redistribute it and/or modify
|
||||||
|
it under the terms of the GNU General Public License as published by
|
||||||
|
the Free Software Foundation, either version 2 of the License, or
|
||||||
|
(at your option) any later version.
|
||||||
|
|
||||||
|
This program is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
GNU General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License
|
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
#include "config_common.h"
|
||||||
|
|
||||||
|
/* USB Device descriptor parameter */
|
||||||
|
#define VENDOR_ID 0xFEED
|
||||||
|
#define PRODUCT_ID 0x6050
|
||||||
|
#define DEVICE_VER 0x0100
|
||||||
|
#define MANUFACTURER LeeKu
|
||||||
|
#define PRODUCT L3
|
||||||
|
#define DESCRIPTION QMK keyboard firmware for L3
|
||||||
|
|
||||||
|
#define RGBLED_NUM 12
|
||||||
|
|
||||||
|
/* key matrix size */
|
||||||
|
#define MATRIX_ROWS 5
|
||||||
|
#define MATRIX_COLS 16
|
||||||
|
|
||||||
|
#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, B0, B1, B2, B3, B4, B5, B6, B7 }
|
||||||
|
#define MATRIX_ROW_PINS { C3, C4, C5, C6, C7 }
|
||||||
|
#define UNUSED_PINS
|
||||||
|
|
||||||
|
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||||
|
#define DEBOUNCE 5
|
||||||
|
|
||||||
|
/* number of backlight levels */
|
||||||
|
#define BACKLIGHT_LEVELS 1
|
||||||
|
|
||||||
|
|
@ -0,0 +1,61 @@
|
||||||
|
/* Copyright 2018 Rasmus Schults <rasmusx@gmail.com>
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
#include "quantum.h"
|
||||||
|
|
||||||
|
#define LAYOUT_all( \
|
||||||
|
K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, K4N, K4O, K4P, \
|
||||||
|
K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N, K3P, \
|
||||||
|
K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, K2M, K2N, K2P, \
|
||||||
|
K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, K1M, K1O, K1P, \
|
||||||
|
K0A, K0B, K0C, K0D, K0G, K0I, K0J, K0M, K0N, K0O, K0P \
|
||||||
|
) { \
|
||||||
|
{ K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, K4N, K4O, K4P }, \
|
||||||
|
{ K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N, KC_NO, K3P }, \
|
||||||
|
{ K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, K2M, K2N, KC_NO, K2P }, \
|
||||||
|
{ K1A, K1B, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, K1M, KC_NO, K1O, K1P }, \
|
||||||
|
{ K0A, K0B, K0C, K0D, KC_NO, KC_NO, K0G, KC_NO, K0I, K0J, KC_NO, KC_NO, K0M, K0N, K0O, K0P } \
|
||||||
|
}
|
||||||
|
|
||||||
|
#define LAYOUT_65_ansi( \
|
||||||
|
K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, K4O, K4P, \
|
||||||
|
K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N, K3P, \
|
||||||
|
K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, K2N, K2P, \
|
||||||
|
K1A, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, K1M, K1O, K1P, \
|
||||||
|
K0A, K0B, K0C, K0G, K0J, K0M, K0N, K0O, K0P \
|
||||||
|
) { \
|
||||||
|
{ K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, KC_NO, K4O, K4P }, \
|
||||||
|
{ K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N, KC_NO, K3P }, \
|
||||||
|
{ K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, KC_NO, K2N, KC_NO, K2P }, \
|
||||||
|
{ K1A, KC_NO, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, K1M, KC_NO, K1O, K1P }, \
|
||||||
|
{ K0A, K0B, K0C, KC_NO, KC_NO, KC_NO, K0G, KC_NO, KC_NO, K0J, KC_NO, KC_NO, K0M, K0N, K0O, K0P } \
|
||||||
|
}
|
||||||
|
|
||||||
|
#define LAYOUT_65_ansi_split_bs( \
|
||||||
|
K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, K4N, K4O, K4P, \
|
||||||
|
K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N, K3P, \
|
||||||
|
K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, K2N, K2P, \
|
||||||
|
K1A, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, K1M, K1O, K1P, \
|
||||||
|
K0A, K0B, K0C, K0G, K0J, K0M, K0N, K0O, K0P \
|
||||||
|
) { \
|
||||||
|
{ K4A, K4B, K4C, K4D, K4E, K4F, K4G, K4H, K4I, K4J, K4K, K4L, K4M, K4N, K4O, K4P }, \
|
||||||
|
{ K3A, K3B, K3C, K3D, K3E, K3F, K3G, K3H, K3I, K3J, K3K, K3L, K3M, K3N, KC_NO, K3P }, \
|
||||||
|
{ K2A, K2B, K2C, K2D, K2E, K2F, K2G, K2H, K2I, K2J, K2K, K2L, KC_NO, K2N, KC_NO, K2P }, \
|
||||||
|
{ K1A, KC_NO, K1C, K1D, K1E, K1F, K1G, K1H, K1I, K1J, K1K, K1L, K1M, KC_NO, K1O, K1P }, \
|
||||||
|
{ K0A, K0B, K0C, KC_NO, KC_NO, KC_NO, K0G, KC_NO, KC_NO, K0J, KC_NO, KC_NO, K0M, K0N, K0O, K0P } \
|
||||||
|
}
|
||||||
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,36 @@
|
||||||
|
#include QMK_KEYBOARD_H
|
||||||
|
|
||||||
|
enum layers {
|
||||||
|
_BASE,
|
||||||
|
_FN,
|
||||||
|
};
|
||||||
|
|
||||||
|
/*
|
||||||
|
* ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
|
||||||
|
* │ESC│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ ( │ ) │ ` │BS │HOM│
|
||||||
|
* ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┼───┤
|
||||||
|
* │ TAB │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │PGU│
|
||||||
|
* ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬────┼───┤
|
||||||
|
* │ FUNC │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ # │ENT │PGD│
|
||||||
|
* ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴───┴┬───┼───┤
|
||||||
|
* │ SHIFT │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │SHIFT │UP │END│
|
||||||
|
* ├────┬───┴┬──┴─┬─┴───┴───┴───┴───┴───┴──┬┴───┴┬──┴──┬───┼───┼───┤
|
||||||
|
* │CTRL│GUI │ALT │ SPACE (6.25u) │ ALT │CTRL │LFT│DWN│RGT│
|
||||||
|
* └────┴────┴────┴────────────────────────┴─────┴─────┴───┴───┴───┘
|
||||||
|
*/
|
||||||
|
|
||||||
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||||
|
[_BASE] = LAYOUT_all(
|
||||||
|
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_HOME,
|
||||||
|
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
|
||||||
|
TG(_FN), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, KC_PGDN,
|
||||||
|
KC_LSFT, XXXXXXX, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END,
|
||||||
|
KC_LCTL, KC_LGUI, KC_LALT, _______, KC_SPC, _______, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
|
||||||
|
|
||||||
|
[_FN] = LAYOUT_all(
|
||||||
|
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, _______, KC_DEL,
|
||||||
|
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, KC_INS,
|
||||||
|
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PSCR,
|
||||||
|
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PGUP, KC_PAUS,
|
||||||
|
_______, _______, _______, _______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END),
|
||||||
|
};
|
||||||
|
|
@ -0,0 +1,54 @@
|
||||||
|
#include QMK_KEYBOARD_H
|
||||||
|
|
||||||
|
enum layers {
|
||||||
|
_QWERTY,
|
||||||
|
_FNMS,
|
||||||
|
};
|
||||||
|
|
||||||
|
#define FNMS MO(_FNMS)
|
||||||
|
|
||||||
|
/*
|
||||||
|
* ┌───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┬───┐
|
||||||
|
* │ESC│ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ ( │ ) │ \ │ \ │HOM│
|
||||||
|
* ├───┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┼───┼───┤
|
||||||
|
* │ TAB │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │BKSPC│PGU│
|
||||||
|
* ├─────┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴┬──┴─────┼───┤
|
||||||
|
* │ ` │ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │ ENTER │PGD│
|
||||||
|
* ├──────┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴─┬─┴────┬───┼───┤
|
||||||
|
* │ SHIFT │ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │SHIFT │UP │END│
|
||||||
|
* ├─────┬──┴┬──┴──┬┴───┴───┴───┴───┴───┴──┬┴───┴┬──┴──┬───┼───┼───┤
|
||||||
|
* │CTRL │GUI│ ALT │ SPACE (6.25u) │ ALT │CTRL │LFT│DWN│RGT│
|
||||||
|
* └─────┴───┴─────┴───────────────────────┴─────┴─────┴───┴───┴───┘
|
||||||
|
*/
|
||||||
|
|
||||||
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||||
|
[_QWERTY] = LAYOUT_65_ansi_split_bs(
|
||||||
|
KC_GESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSLS, KC_HOME,
|
||||||
|
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_PGUP,
|
||||||
|
KC_GRV, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN,
|
||||||
|
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_END,
|
||||||
|
KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, FNMS, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
|
||||||
|
),
|
||||||
|
|
||||||
|
[_FNMS] = LAYOUT_65_ansi_split_bs(
|
||||||
|
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, KC_MPLY,
|
||||||
|
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, RESET, KC_VOLU,
|
||||||
|
AG_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, EEP_RST, KC_VOLD,
|
||||||
|
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_BTN1, KC_MS_U,KC_MNXT,
|
||||||
|
_______, _______, _______, _______, _______, _______, KC_MS_L,KC_MS_D, KC_MS_R
|
||||||
|
),
|
||||||
|
};
|
||||||
|
|
||||||
|
// uint32_t layer_state_set_user(uint32_t state) {
|
||||||
|
// switch(biton32(state)) {
|
||||||
|
// case _FNMS:
|
||||||
|
// led_off();
|
||||||
|
// rgb_on();
|
||||||
|
// break;
|
||||||
|
// default:
|
||||||
|
// led_off();
|
||||||
|
// rgb_off();
|
||||||
|
// break;
|
||||||
|
// }
|
||||||
|
// return state;
|
||||||
|
// }
|
||||||
|
|
@ -0,0 +1 @@
|
||||||
|
MOUSEKEY_ENABLE = yes
|
||||||
|
|
@ -0,0 +1,16 @@
|
||||||
|
# Leeku Finger65 PCB
|
||||||
|
|
||||||
|
* Keyboard Maintainer: [sidcarter](https://github.com/sidcarter)
|
||||||
|
* Hardware Supported: LeeKu Finger65 PCB, atmega32a
|
||||||
|
|
||||||
|
* Make example for this keyboard (after setting up your build environment):
|
||||||
|
|
||||||
|
make leeku/finger65:default
|
||||||
|
|
||||||
|
* This PCB is not QMK ready by default. If you want to use your Leeku Finger65 PCB with QMK, you must:
|
||||||
|
|
||||||
|
* ISP Flash the Leeku PCB using the bootloader for the atmega32a that resides in the `util/` folder
|
||||||
|
* Build and install [bootloadHID](https://www.obdev.at/products/vusb/bootloadhid.html) on your system
|
||||||
|
* You can then do a `make leeku/finger65:default:flash` to flash your PCB with QMK
|
||||||
|
|
||||||
|
* See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||||
|
|
@ -0,0 +1,25 @@
|
||||||
|
# MCU name
|
||||||
|
MCU = atmega32a
|
||||||
|
|
||||||
|
# Bootloader selection
|
||||||
|
# Teensy halfkay
|
||||||
|
# Pro Micro caterina
|
||||||
|
# Atmel DFU atmel-dfu
|
||||||
|
# LUFA DFU lufa-dfu
|
||||||
|
# QMK DFU qmk-dfu
|
||||||
|
# ATmega32A bootloadHID
|
||||||
|
# ATmega328P USBasp
|
||||||
|
BOOTLOADER = bootloadHID
|
||||||
|
|
||||||
|
# Build Options
|
||||||
|
# change yes to no to disable
|
||||||
|
#
|
||||||
|
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
|
||||||
|
MOUSEKEY_ENABLE = no # Mouse keys
|
||||||
|
EXTRAKEY_ENABLE = no # Audio control and System control
|
||||||
|
CONSOLE_ENABLE = no # Console for debug
|
||||||
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
|
MIDI_ENABLE = no # MIDI support
|
||||||
|
|
@ -0,0 +1,364 @@
|
||||||
|
/* Name: usbconfig.h
|
||||||
|
* Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
|
||||||
|
* Author: Christian Starkjohann
|
||||||
|
* Creation Date: 2005-04-01
|
||||||
|
* Tabsize: 4
|
||||||
|
* Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
|
||||||
|
* License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
|
||||||
|
* This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef __usbconfig_h_included__
|
||||||
|
#define __usbconfig_h_included__
|
||||||
|
|
||||||
|
|
||||||
|
/*
|
||||||
|
General Description:
|
||||||
|
This file is an example configuration (with inline documentation) for the USB
|
||||||
|
driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is
|
||||||
|
also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may
|
||||||
|
wire the lines to any other port, as long as D+ is also wired to INT0 (or any
|
||||||
|
other hardware interrupt, as long as it is the highest level interrupt, see
|
||||||
|
section at the end of this file).
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* ---------------------------- Hardware Config ---------------------------- */
|
||||||
|
|
||||||
|
#define USB_CFG_IOPORTNAME D
|
||||||
|
/* This is the port where the USB bus is connected. When you configure it to
|
||||||
|
* "B", the registers PORTB, PINB and DDRB will be used.
|
||||||
|
*/
|
||||||
|
#define USB_CFG_DMINUS_BIT 3
|
||||||
|
/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
|
||||||
|
* This may be any bit in the port.
|
||||||
|
*/
|
||||||
|
#define USB_CFG_DPLUS_BIT 2
|
||||||
|
/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
|
||||||
|
* This may be any bit in the port. Please note that D+ must also be connected
|
||||||
|
* to interrupt pin INT0! [You can also use other interrupts, see section
|
||||||
|
* "Optional MCU Description" below, or you can connect D- to the interrupt, as
|
||||||
|
* it is required if you use the USB_COUNT_SOF feature. If you use D- for the
|
||||||
|
* interrupt, the USB interrupt will also be triggered at Start-Of-Frame
|
||||||
|
* markers every millisecond.]
|
||||||
|
*/
|
||||||
|
#define USB_CFG_CLOCK_KHZ (F_CPU/1000)
|
||||||
|
/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
|
||||||
|
* 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
|
||||||
|
* require no crystal, they tolerate +/- 1% deviation from the nominal
|
||||||
|
* frequency. All other rates require a precision of 2000 ppm and thus a
|
||||||
|
* crystal!
|
||||||
|
* Since F_CPU should be defined to your actual clock rate anyway, you should
|
||||||
|
* not need to modify this setting.
|
||||||
|
*/
|
||||||
|
#define USB_CFG_CHECK_CRC 0
|
||||||
|
/* Define this to 1 if you want that the driver checks integrity of incoming
|
||||||
|
* data packets (CRC checks). CRC checks cost quite a bit of code size and are
|
||||||
|
* currently only available for 18 MHz crystal clock. You must choose
|
||||||
|
* USB_CFG_CLOCK_KHZ = 18000 if you enable this option.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* ----------------------- Optional Hardware Config ------------------------ */
|
||||||
|
|
||||||
|
/* #define USB_CFG_PULLUP_IOPORTNAME D */
|
||||||
|
/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
|
||||||
|
* V+, you can connect and disconnect the device from firmware by calling
|
||||||
|
* the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h).
|
||||||
|
* This constant defines the port on which the pullup resistor is connected.
|
||||||
|
*/
|
||||||
|
/* #define USB_CFG_PULLUP_BIT 4 */
|
||||||
|
/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
|
||||||
|
* above) where the 1.5k pullup resistor is connected. See description
|
||||||
|
* above for details.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* --------------------------- Functional Range ---------------------------- */
|
||||||
|
|
||||||
|
#define USB_CFG_HAVE_INTRIN_ENDPOINT 1
|
||||||
|
/* Define this to 1 if you want to compile a version with two endpoints: The
|
||||||
|
* default control endpoint 0 and an interrupt-in endpoint (any other endpoint
|
||||||
|
* number).
|
||||||
|
*/
|
||||||
|
#define USB_CFG_HAVE_INTRIN_ENDPOINT3 1
|
||||||
|
/* Define this to 1 if you want to compile a version with three endpoints: The
|
||||||
|
* default control endpoint 0, an interrupt-in endpoint 3 (or the number
|
||||||
|
* configured below) and a catch-all default interrupt-in endpoint as above.
|
||||||
|
* You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
|
||||||
|
*/
|
||||||
|
#define USB_CFG_EP3_NUMBER 3
|
||||||
|
/* If the so-called endpoint 3 is used, it can now be configured to any other
|
||||||
|
* endpoint number (except 0) with this macro. Default if undefined is 3.
|
||||||
|
*/
|
||||||
|
/* #define USB_INITIAL_DATATOKEN USBPID_DATA1 */
|
||||||
|
/* The above macro defines the startup condition for data toggling on the
|
||||||
|
* interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1.
|
||||||
|
* Since the token is toggled BEFORE sending any data, the first packet is
|
||||||
|
* sent with the oposite value of this configuration!
|
||||||
|
*/
|
||||||
|
#define USB_CFG_IMPLEMENT_HALT 0
|
||||||
|
/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
|
||||||
|
* for endpoint 1 (interrupt endpoint). Although you may not need this feature,
|
||||||
|
* it is required by the standard. We have made it a config option because it
|
||||||
|
* bloats the code considerably.
|
||||||
|
*/
|
||||||
|
#define USB_CFG_SUPPRESS_INTR_CODE 0
|
||||||
|
/* Define this to 1 if you want to declare interrupt-in endpoints, but don't
|
||||||
|
* want to send any data over them. If this macro is defined to 1, functions
|
||||||
|
* usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
|
||||||
|
* you need the interrupt-in endpoints in order to comply to an interface
|
||||||
|
* (e.g. HID), but never want to send any data. This option saves a couple
|
||||||
|
* of bytes in flash memory and the transmit buffers in RAM.
|
||||||
|
*/
|
||||||
|
#define USB_CFG_IS_SELF_POWERED 0
|
||||||
|
/* Define this to 1 if the device has its own power supply. Set it to 0 if the
|
||||||
|
* device is powered from the USB bus.
|
||||||
|
*/
|
||||||
|
#define USB_CFG_IMPLEMENT_FN_WRITE 1
|
||||||
|
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
|
||||||
|
* transfers. Set it to 0 if you don't need it and want to save a couple of
|
||||||
|
* bytes.
|
||||||
|
*/
|
||||||
|
#define USB_CFG_IMPLEMENT_FN_READ 0
|
||||||
|
/* Set this to 1 if you need to send control replies which are generated
|
||||||
|
* "on the fly" when usbFunctionRead() is called. If you only want to send
|
||||||
|
* data from a static buffer, set it to 0 and return the data from
|
||||||
|
* usbFunctionSetup(). This saves a couple of bytes.
|
||||||
|
*/
|
||||||
|
#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0
|
||||||
|
/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
|
||||||
|
* You must implement the function usbFunctionWriteOut() which receives all
|
||||||
|
* interrupt/bulk data sent to any endpoint other than 0. The endpoint number
|
||||||
|
* can be found in 'usbRxToken'.
|
||||||
|
*/
|
||||||
|
#define USB_CFG_HAVE_FLOWCONTROL 0
|
||||||
|
/* Define this to 1 if you want flowcontrol over USB data. See the definition
|
||||||
|
* of the macros usbDisableAllRequests() and usbEnableAllRequests() in
|
||||||
|
* usbdrv.h.
|
||||||
|
*/
|
||||||
|
#define USB_CFG_DRIVER_FLASH_PAGE 0
|
||||||
|
/* If the device has more than 64 kBytes of flash, define this to the 64 k page
|
||||||
|
* where the driver's constants (descriptors) are located. Or in other words:
|
||||||
|
* Define this to 1 for boot loaders on the ATMega128.
|
||||||
|
*/
|
||||||
|
#define USB_CFG_LONG_TRANSFERS 0
|
||||||
|
/* Define this to 1 if you want to send/receive blocks of more than 254 bytes
|
||||||
|
* in a single control-in or control-out transfer. Note that the capability
|
||||||
|
* for long transfers increases the driver size.
|
||||||
|
*/
|
||||||
|
/* #define USB_RX_USER_HOOK(data, len) if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */
|
||||||
|
/* This macro is a hook if you want to do unconventional things. If it is
|
||||||
|
* defined, it's inserted at the beginning of received message processing.
|
||||||
|
* If you eat the received message and don't want default processing to
|
||||||
|
* proceed, do a return after doing your things. One possible application
|
||||||
|
* (besides debugging) is to flash a status LED on each packet.
|
||||||
|
*/
|
||||||
|
/* #define USB_RESET_HOOK(resetStarts) if(!resetStarts){hadUsbReset();} */
|
||||||
|
/* This macro is a hook if you need to know when an USB RESET occurs. It has
|
||||||
|
* one parameter which distinguishes between the start of RESET state and its
|
||||||
|
* end.
|
||||||
|
*/
|
||||||
|
/* #define USB_SET_ADDRESS_HOOK() hadAddressAssigned(); */
|
||||||
|
/* This macro (if defined) is executed when a USB SET_ADDRESS request was
|
||||||
|
* received.
|
||||||
|
*/
|
||||||
|
#define USB_COUNT_SOF 0
|
||||||
|
/* define this macro to 1 if you need the global variable "usbSofCount" which
|
||||||
|
* counts SOF packets. This feature requires that the hardware interrupt is
|
||||||
|
* connected to D- instead of D+.
|
||||||
|
*/
|
||||||
|
/* #ifdef __ASSEMBLER__
|
||||||
|
* macro myAssemblerMacro
|
||||||
|
* in YL, TCNT0
|
||||||
|
* sts timer0Snapshot, YL
|
||||||
|
* endm
|
||||||
|
* #endif
|
||||||
|
* #define USB_SOF_HOOK myAssemblerMacro
|
||||||
|
* This macro (if defined) is executed in the assembler module when a
|
||||||
|
* Start Of Frame condition is detected. It is recommended to define it to
|
||||||
|
* the name of an assembler macro which is defined here as well so that more
|
||||||
|
* than one assembler instruction can be used. The macro may use the register
|
||||||
|
* YL and modify SREG. If it lasts longer than a couple of cycles, USB messages
|
||||||
|
* immediately after an SOF pulse may be lost and must be retried by the host.
|
||||||
|
* What can you do with this hook? Since the SOF signal occurs exactly every
|
||||||
|
* 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in
|
||||||
|
* designs running on the internal RC oscillator.
|
||||||
|
* Please note that Start Of Frame detection works only if D- is wired to the
|
||||||
|
* interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES!
|
||||||
|
*/
|
||||||
|
#define USB_CFG_CHECK_DATA_TOGGLING 0
|
||||||
|
/* define this macro to 1 if you want to filter out duplicate data packets
|
||||||
|
* sent by the host. Duplicates occur only as a consequence of communication
|
||||||
|
* errors, when the host does not receive an ACK. Please note that you need to
|
||||||
|
* implement the filtering yourself in usbFunctionWriteOut() and
|
||||||
|
* usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable
|
||||||
|
* for each control- and out-endpoint to check for duplicate packets.
|
||||||
|
*/
|
||||||
|
#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0
|
||||||
|
/* define this macro to 1 if you want the function usbMeasureFrameLength()
|
||||||
|
* compiled in. This function can be used to calibrate the AVR's RC oscillator.
|
||||||
|
*/
|
||||||
|
#define USB_USE_FAST_CRC 0
|
||||||
|
/* The assembler module has two implementations for the CRC algorithm. One is
|
||||||
|
* faster, the other is smaller. This CRC routine is only used for transmitted
|
||||||
|
* messages where timing is not critical. The faster routine needs 31 cycles
|
||||||
|
* per byte while the smaller one needs 61 to 69 cycles. The faster routine
|
||||||
|
* may be worth the 32 bytes bigger code size if you transmit lots of data and
|
||||||
|
* run the AVR close to its limit.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* -------------------------- Device Description --------------------------- */
|
||||||
|
|
||||||
|
#define USB_CFG_VENDOR_ID (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF)
|
||||||
|
/* USB vendor ID for the device, low byte first. If you have registered your
|
||||||
|
* own Vendor ID, define it here. Otherwise you may use one of obdev's free
|
||||||
|
* shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
|
||||||
|
* *** IMPORTANT NOTE ***
|
||||||
|
* This template uses obdev's shared VID/PID pair for Vendor Class devices
|
||||||
|
* with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand
|
||||||
|
* the implications!
|
||||||
|
*/
|
||||||
|
#define USB_CFG_DEVICE_ID (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF)
|
||||||
|
/* This is the ID of the product, low byte first. It is interpreted in the
|
||||||
|
* scope of the vendor ID. If you have registered your own VID with usb.org
|
||||||
|
* or if you have licensed a PID from somebody else, define it here. Otherwise
|
||||||
|
* you may use one of obdev's free shared VID/PID pairs. See the file
|
||||||
|
* USB-IDs-for-free.txt for details!
|
||||||
|
* *** IMPORTANT NOTE ***
|
||||||
|
* This template uses obdev's shared VID/PID pair for Vendor Class devices
|
||||||
|
* with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand
|
||||||
|
* the implications!
|
||||||
|
*/
|
||||||
|
#define USB_CFG_DEVICE_VERSION (DEVICE_VER & 0xFF), ((DEVICE_VER >> 8) & 0xFF)
|
||||||
|
/* Version number of the device: Minor number first, then major number.
|
||||||
|
*/
|
||||||
|
#define USB_CFG_VENDOR_NAME 'L', 'e', 'e', 'k', 'u'
|
||||||
|
#define USB_CFG_VENDOR_NAME_LEN 5
|
||||||
|
/* These two values define the vendor name returned by the USB device. The name
|
||||||
|
* must be given as a list of characters under single quotes. The characters
|
||||||
|
* are interpreted as Unicode (UTF-16) entities.
|
||||||
|
* If you don't want a vendor name string, undefine these macros.
|
||||||
|
* ALWAYS define a vendor name containing your Internet domain name if you use
|
||||||
|
* obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
|
||||||
|
* details.
|
||||||
|
*/
|
||||||
|
#define USB_CFG_DEVICE_NAME 'F', 'i', 'n', 'g', 'e', 'r', '6', '5'
|
||||||
|
#define USB_CFG_DEVICE_NAME_LEN 8
|
||||||
|
/* Same as above for the device name. If you don't want a device name, undefine
|
||||||
|
* the macros. See the file USB-IDs-for-free.txt before you assign a name if
|
||||||
|
* you use a shared VID/PID.
|
||||||
|
*/
|
||||||
|
/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
|
||||||
|
/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
|
||||||
|
/* Same as above for the serial number. If you don't want a serial number,
|
||||||
|
* undefine the macros.
|
||||||
|
* It may be useful to provide the serial number through other means than at
|
||||||
|
* compile time. See the section about descriptor properties below for how
|
||||||
|
* to fine tune control over USB descriptors such as the string descriptor
|
||||||
|
* for the serial number.
|
||||||
|
*/
|
||||||
|
#define USB_CFG_DEVICE_CLASS 0
|
||||||
|
#define USB_CFG_DEVICE_SUBCLASS 0
|
||||||
|
/* See USB specification if you want to conform to an existing device class.
|
||||||
|
* Class 0xff is "vendor specific".
|
||||||
|
*/
|
||||||
|
#define USB_CFG_INTERFACE_CLASS 3 /* HID */
|
||||||
|
#define USB_CFG_INTERFACE_SUBCLASS 1 /* Boot */
|
||||||
|
#define USB_CFG_INTERFACE_PROTOCOL 1 /* Keyboard */
|
||||||
|
/* See USB specification if you want to conform to an existing device class or
|
||||||
|
* protocol. The following classes must be set at interface level:
|
||||||
|
* HID class is 3, no subclass and protocol required (but may be useful!)
|
||||||
|
* CDC class is 2, use subclass 2 and protocol 1 for ACM
|
||||||
|
*/
|
||||||
|
#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 0
|
||||||
|
/* Define this to the length of the HID report descriptor, if you implement
|
||||||
|
* an HID device. Otherwise don't define it or define it to 0.
|
||||||
|
* If you use this define, you must add a PROGMEM character array named
|
||||||
|
* "usbHidReportDescriptor" to your code which contains the report descriptor.
|
||||||
|
* Don't forget to keep the array and this define in sync!
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* #define USB_PUBLIC static */
|
||||||
|
/* Use the define above if you #include usbdrv.c instead of linking against it.
|
||||||
|
* This technique saves a couple of bytes in flash memory.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* ------------------- Fine Control over USB Descriptors ------------------- */
|
||||||
|
/* If you don't want to use the driver's default USB descriptors, you can
|
||||||
|
* provide our own. These can be provided as (1) fixed length static data in
|
||||||
|
* flash memory, (2) fixed length static data in RAM or (3) dynamically at
|
||||||
|
* runtime in the function usbFunctionDescriptor(). See usbdrv.h for more
|
||||||
|
* information about this function.
|
||||||
|
* Descriptor handling is configured through the descriptor's properties. If
|
||||||
|
* no properties are defined or if they are 0, the default descriptor is used.
|
||||||
|
* Possible properties are:
|
||||||
|
* + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched
|
||||||
|
* at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is
|
||||||
|
* used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if
|
||||||
|
* you want RAM pointers.
|
||||||
|
* + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found
|
||||||
|
* in static memory is in RAM, not in flash memory.
|
||||||
|
* + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash),
|
||||||
|
* the driver must know the descriptor's length. The descriptor itself is
|
||||||
|
* found at the address of a well known identifier (see below).
|
||||||
|
* List of static descriptor names (must be declared PROGMEM if in flash):
|
||||||
|
* char usbDescriptorDevice[];
|
||||||
|
* char usbDescriptorConfiguration[];
|
||||||
|
* char usbDescriptorHidReport[];
|
||||||
|
* char usbDescriptorString0[];
|
||||||
|
* int usbDescriptorStringVendor[];
|
||||||
|
* int usbDescriptorStringDevice[];
|
||||||
|
* int usbDescriptorStringSerialNumber[];
|
||||||
|
* Other descriptors can't be provided statically, they must be provided
|
||||||
|
* dynamically at runtime.
|
||||||
|
*
|
||||||
|
* Descriptor properties are or-ed or added together, e.g.:
|
||||||
|
* #define USB_CFG_DESCR_PROPS_DEVICE (USB_PROP_IS_RAM | USB_PROP_LENGTH(18))
|
||||||
|
*
|
||||||
|
* The following descriptors are defined:
|
||||||
|
* USB_CFG_DESCR_PROPS_DEVICE
|
||||||
|
* USB_CFG_DESCR_PROPS_CONFIGURATION
|
||||||
|
* USB_CFG_DESCR_PROPS_STRINGS
|
||||||
|
* USB_CFG_DESCR_PROPS_STRING_0
|
||||||
|
* USB_CFG_DESCR_PROPS_STRING_VENDOR
|
||||||
|
* USB_CFG_DESCR_PROPS_STRING_PRODUCT
|
||||||
|
* USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
|
||||||
|
* USB_CFG_DESCR_PROPS_HID
|
||||||
|
* USB_CFG_DESCR_PROPS_HID_REPORT
|
||||||
|
* USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver)
|
||||||
|
*
|
||||||
|
* Note about string descriptors: String descriptors are not just strings, they
|
||||||
|
* are Unicode strings prefixed with a 2 byte header. Example:
|
||||||
|
* int serialNumberDescriptor[] = {
|
||||||
|
* USB_STRING_DESCRIPTOR_HEADER(6),
|
||||||
|
* 'S', 'e', 'r', 'i', 'a', 'l'
|
||||||
|
* };
|
||||||
|
*/
|
||||||
|
|
||||||
|
#define USB_CFG_DESCR_PROPS_DEVICE 0
|
||||||
|
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
|
||||||
|
#define USB_CFG_DESCR_PROPS_STRINGS 0
|
||||||
|
#define USB_CFG_DESCR_PROPS_STRING_0 0
|
||||||
|
#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
|
||||||
|
#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
|
||||||
|
#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
|
||||||
|
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
|
||||||
|
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
|
||||||
|
#define USB_CFG_DESCR_PROPS_UNKNOWN 0
|
||||||
|
|
||||||
|
/* ----------------------- Optional MCU Description ------------------------ */
|
||||||
|
|
||||||
|
/* The following configurations have working defaults in usbdrv.h. You
|
||||||
|
* usually don't need to set them explicitly. Only if you want to run
|
||||||
|
* the driver on a device which is not yet supported or with a compiler
|
||||||
|
* which is not fully supported (such as IAR C) or if you use a differnt
|
||||||
|
* interrupt than INT0, you may have to define some of these.
|
||||||
|
*/
|
||||||
|
/* #define USB_INTR_CFG MCUCR */
|
||||||
|
/* #define USB_INTR_CFG_SET ((1 << ISC00) | (1 << ISC01)) */
|
||||||
|
/* #define USB_INTR_CFG_CLR 0 */
|
||||||
|
/* #define USB_INTR_ENABLE GIMSK */
|
||||||
|
/* #define USB_INTR_ENABLE_BIT INT0 */
|
||||||
|
/* #define USB_INTR_PENDING GIFR */
|
||||||
|
/* #define USB_INTR_PENDING_BIT INTF0 */
|
||||||
|
/* #define USB_INTR_VECTOR INT0_vect */
|
||||||
|
|
||||||
|
#endif /* __usbconfig_h_included__ */
|
||||||
Loading…
Reference in New Issue