diff --git a/common/host.h b/common/host.h
index 207b68310..841798796 100644
--- a/common/host.h
+++ b/common/host.h
@@ -19,6 +19,7 @@ along with this program. If not, see .
#define HOST_H
#include
+#include
#include "report.h"
#include "host_driver.h"
diff --git a/keyboard/hid_liber/Makefile.lufa b/keyboard/hid_liber/Makefile.lufa
new file mode 100644
index 000000000..2d560b9a6
--- /dev/null
+++ b/keyboard/hid_liber/Makefile.lufa
@@ -0,0 +1,120 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+# Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+# (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+# have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+# have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+# (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+# (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+# with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+# bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = hid_liber_lufa
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+
+# List C source files here. (C dependencies are automatically generated.)
+SRC += keymap.c \
+ matrix.c \
+ led.c
+
+CONFIG_H = config.h
+
+
+# MCU name
+#MCU = at90usb1287
+MCU = atmega32u4
+
+# Processor frequency.
+# This will define a symbol, F_CPU, in all source code files equal to the
+# processor frequency in Hz. You can then use this symbol in your source code to
+# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+# automatically to create a 32-bit value in your source code.
+#
+# This will be an integer division of F_USB below, as it is sourced by
+# F_USB after it has run through any CPU prescalers. Note that this value
+# does not *change* the processor frequency - it should merely be updated to
+# reflect the processor speed set externally so that the code can use accurate
+# software delays.
+F_CPU = 16000000
+
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+# This will define a symbol, F_USB, in all source code files equal to the
+# input clock frequency (before any prescaling is performed) in Hz. This value may
+# differ from F_CPU if prescaling is used on the latter, and is required as the
+# raw input clock is fed directly to the PLL sections of the AVR for high speed
+# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+# at the end, this will be done automatically to create a 32-bit value in your
+# source code.
+#
+# If no clock division is performed on the input clock inside the AVR (via the
+# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+
+# Build Options
+# comment out to disable the options.
+#
+#MOUSEKEY_ENABLE = yes # Mouse keys
+EXTRAKEY_ENABLE = yes # Audio control and System control
+CONSOLE_ENABLE = yes # Console for debug
+#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
+#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
+
+
+# Boot Section Size in bytes
+# Teensy halfKay 512
+# Atmel DFU loader 4096
+# LUFA bootloader 4096
+OPT_DEFS += -DBOOT_SIZE=4096
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+include $(TOP_DIR)/protocol/lufa.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/keyboard/hid_liber/Makefile.pjrc b/keyboard/hid_liber/Makefile.pjrc
new file mode 100644
index 000000000..8e349c8da
--- /dev/null
+++ b/keyboard/hid_liber/Makefile.pjrc
@@ -0,0 +1,90 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make all = Make software.
+#
+# make clean = Clean out built project files.
+#
+# make coff = Convert ELF to AVR COFF.
+#
+# make extcoff = Convert ELF to AVR Extended COFF.
+#
+# make program = Download the hex file to the device.
+# Please customize your programmer settings(PROGRAM_CMD)
+#
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+# (must have teensy_loader_cli installed).
+#
+# make dfu = Download the hex file to the device, using dfu-programmer (must
+# have dfu-programmer installed).
+#
+# make flip = Download the hex file to the device, using Atmel FLIP (must
+# have Atmel FLIP installed).
+#
+# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
+# (must have dfu-programmer installed).
+#
+# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
+# (must have Atmel FLIP installed).
+#
+# make debug = Start either simulavr or avarice as specified for debugging,
+# with avr-gdb or avr-insight as the front end for debugging.
+#
+# make filename.s = Just compile filename.c into the assembler code only.
+#
+# make filename.i = Create a preprocessed source file for use in submitting
+# bug reports to the GCC project.
+#
+# To rebuild project do "make clean" then "make all".
+#----------------------------------------------------------------------------
+
+# Target file name (without extension).
+TARGET = hid_liber_pjrc
+
+# Directory common source filess exist
+TOP_DIR = ../..
+
+# Directory keyboard dependent files exist
+TARGET_DIR = .
+
+# keyboard dependent files
+SRC = keymap.c \
+ matrix.c \
+ led.c
+
+CONFIG_H = config.h
+
+
+# MCU name, you MUST set this to match the board you are using
+# type "make clean" after changing this, so all files will be rebuilt
+#MCU = at90usb162 # Teensy 1.0
+MCU = atmega32u4 # Teensy 2.0
+#MCU = at90usb646 # Teensy++ 1.0
+#MCU = at90usb1286 # Teensy++ 2.0
+
+
+# Processor frequency.
+# Normally the first thing your program should do is set the clock prescaler,
+# so your program will run at the correct speed. You should also set this
+# variable to same clock speed. The _delay_ms() macro uses this, and many
+# examples use this variable to calculate timings. Do not add a "UL" here.
+F_CPU = 16000000
+
+
+# Build Options
+# comment out to disable the options.
+#
+#MOUSEKEY_ENABLE = yes # Mouse keys
+#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
+EXTRAKEY_ENABLE = yes # Audio control and System control
+NKRO_ENABLE = yes # USB Nkey Rollover
+CONSOLE_ENABLE = yes # Console for debug
+
+
+# Search Path
+VPATH += $(TARGET_DIR)
+VPATH += $(TOP_DIR)
+
+include $(TOP_DIR)/protocol/pjrc.mk
+include $(TOP_DIR)/common.mk
+include $(TOP_DIR)/rules.mk
diff --git a/keyboard/hid_liber/config.h b/keyboard/hid_liber/config.h
new file mode 100644
index 000000000..792727165
--- /dev/null
+++ b/keyboard/hid_liber/config.h
@@ -0,0 +1,56 @@
+/*
+Copyright 2012 Jun Wako
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see .
+*/
+
+#ifndef CONFIG_H
+#define CONFIG_H
+
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID 0xFEED
+#define PRODUCT_ID 0xB919
+#define DEVICE_VER 0x0001
+#define MANUFACTURER t.m.k.
+#define PRODUCT HID Liberation
+
+
+/* message strings */
+#define DESCRIPTION t.m.k. keyboard firmware for HID Liberation
+
+
+/* matrix size */
+#define MATRIX_ROWS 18
+#define MATRIX_COLS 8
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if need no debouncing */
+#define DEBOUNCE 7
+
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+// TODO: configurable
+#define DEBUG_LED 0
+#define DEBUG_LED_CONFIG
+#define DEBUG_LED_ON
+#define DEBUG_LED_OFF
+
+#endif
diff --git a/keyboard/hid_liber/keymap.c b/keyboard/hid_liber/keymap.c
new file mode 100644
index 000000000..ecfa5cbe6
--- /dev/null
+++ b/keyboard/hid_liber/keymap.c
@@ -0,0 +1,184 @@
+/*
+Copyright 2011 Jun Wako
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see .
+*/
+
+/*
+ * Keymap for HID Liberator controller
+ */
+#include
+#include
+#include
+#include "keycode.h"
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "keymap.h"
+
+
+// Convert physical keyboard layout to matrix array.
+// This is a macro to define keymap easily in keyboard layout form.
+#define KEYMAP( \
+ KG1, KH7, KJ7, KJ6, KJ1, KO5, KL1, KA6, KA7, KD7, KD5, KD1, KD2, KB5, KB3, KO3, \
+ KG7, KG5, KH5, KJ5, KI5, KI7, KK7, KK5, KL5, KA5, KC5, KC7, KL7, KD6, KQ7, KN7, KM7, \
+ KG6, KG3, KH3, KJ3, KI3, KI6, KK6, KK3, KL3, KA3, KC3, KC6, KL6, KD4, KP7, KN5, KM5, \
+ KH6, KG4, KH4, KJ4, KI4, KI1, KK1, KK4, KL4, KA4, KC4, KC1, KD0, \
+ KF6, KQ0, KG0, KH0, KJ0, KI0, KI2, KK2, KK0, KL0, KA0, KC2, KF4, KN1, \
+ KO7, KE6, KB1, KP1, KB2, KR4, KA2, KO0, KN2, KP2, KQ2 \
+) { \
+/* 0 1 2 3 4 5 6 7 */ \
+/* A */ { KC_##KA0, KC_NO , KC_##KA2, KC_##KA3, KC_##KA4, KC_##KA5, KC_##KA6, KC_##KA7 }, \
+/* B */ { KC_NO , KC_##KB1, KC_##KB2, KC_##KB3, KC_NO , KC_##KB5, KC_NO , KC_NO }, \
+/* C */ { KC_NO , KC_##KC1, KC_##KC2, KC_##KC3, KC_##KC4, KC_##KC5, KC_##KC6, KC_##KC7 }, \
+/* D */ { KC_##KD0, KC_##KD1, KC_##KD2, KC_NO , KC_##KD4, KC_##KD5, KC_##KD6, KC_##KD7 }, \
+/* E */ { KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_##KE6, KC_NO }, \
+/* F */ { KC_NO , KC_NO , KC_NO , KC_NO , KC_##KF4, KC_NO , KC_##KF6, KC_NO }, \
+/* G */ { KC_##KG0, KC_##KG1, KC_NO , KC_##KG3, KC_##KG4, KC_##KG5, KC_##KG6, KC_##KG7 }, \
+/* H */ { KC_##KH0, KC_NO , KC_NO , KC_##KH3, KC_##KH4, KC_##KH5, KC_##KH6, KC_##KH7 }, \
+/* I */ { KC_##KI0, KC_##KI1, KC_##KI2, KC_##KI3, KC_##KI4, KC_##KI5, KC_##KI6, KC_##KI7 }, \
+/* J */ { KC_##KJ0, KC_##KJ1, KC_NO , KC_##KJ3, KC_##KJ4, KC_##KJ5, KC_##KJ6, KC_##KJ7 }, \
+/* K */ { KC_##KK0, KC_##KK1, KC_##KK2, KC_##KK3, KC_##KK4, KC_##KK5, KC_##KK6, KC_##KK7 }, \
+/* L */ { KC_##KL0, KC_##KL1, KC_NO , KC_##KL3, KC_##KL4, KC_##KL5, KC_##KL6, KC_##KL7 }, \
+/* M */ { KC_NO , KC_NO , KC_NO , KC_NO , KC_NO , KC_##KM5, KC_NO , KC_##KM7 }, \
+/* N */ { KC_NO , KC_##KN1, KC_##KN2, KC_NO , KC_NO , KC_##KN5, KC_NO , KC_##KN7 }, \
+/* O */ { KC_##KO0, KC_NO , KC_NO , KC_##KO3, KC_NO , KC_##KO5, KC_NO , KC_##KO7 }, \
+/* P */ { KC_NO , KC_##KP1, KC_##KP2, KC_NO , KC_NO , KC_NO , KC_NO , KC_##KP7 }, \
+/* Q */ { KC_NO , KC_NO , KC_##KQ2, KC_NO , KC_NO , KC_NO , KC_NO , KC_##KQ7 }, \
+/* R */ { KC_NO , KC_NO , KC_NO , KC_NO , KC_##KR4, KC_NO , KC_NO , KC_NO } \
+}
+
+#define KEYCODE(layer, row, col) (pgm_read_byte(&keymaps[(layer)][(row)][(col)]))
+
+
+// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
+static const uint8_t PROGMEM fn_layer[] = {
+ 0, // Fn0
+ 1, // Fn1
+ 2, // Fn2
+ 3, // Fn3
+ 4, // Fn4
+ 5, // Fn5
+ 6, // Fn6
+ 7 // Fn7
+};
+
+// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
+// See layer.c for details.
+static const uint8_t PROGMEM fn_keycode[] = {
+ KC_NO, // Fn0
+ KC_NO, // Fn1
+ KC_NO, // Fn2
+ KC_NO, // Fn3
+ KC_NO, // Fn4
+ KC_NO, // Fn5
+ KC_NO, // Fn6
+ KC_NO // Fn7
+};
+
+/*
+ * Tenkeyless keyboard default layout, ISO & ANSI (ISO is next to right shift,
+ * not present on ANSI, other ISO switches move from ANSI layout but are same
+ * switch
+ *
+ * ,---. ,---------------. ,---------------. ,---------------. ,-----------.
+ * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|
+ * `---' `---------------' `---------------' `---------------' `-----------'
+ * ,-----------------------------------------------------------. ,-----------.
+ * |~ | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | |Ins|Hom|PgU|
+ * |-----------------------------------------------------------| |-----------|
+ * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD|
+ * |-----------------------------------------------------------| `-----------'
+ * |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return |
+ * |-----------------------------------------------------------| ,---.
+ * |Shft|ISO| Z| X| C| V| B| N| M| ,| .| /|Shift | |Up |
+ * |-----------------------------------------------------------| ,-----------.
+ * |Ctl|Gui|Alt| Space |Alt|Gui|App|Ctl| |Lef|Dow|Rig|
+ * `-----------------------------------------------------------' `-----------'
+ */
+
+
+static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+/* Layer 0: Default Layer
+ *
+ * ANSI:
+ *
+ * ,---. ,---------------. ,---------------. ,---------------. ,-----------.
+ * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|
+ * `---' `---------------' `---------------' `---------------' `-----------'
+ * ,-----------------------------------------------------------. ,-----------.
+ * |~ | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backsp | |Ins|Hom|PgU|
+ * |-----------------------------------------------------------| |-----------|
+ * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |Del|End|PgD|
+ * |-----------------------------------------------------------| `-----------'
+ * |FN1 | A| S| D| F| G| H| J| K| L| ;| '|Return |
+ * |-----------------------------------------------------------| ,---.
+ * |Shft | Z| X| C| V| B| N| M| ,| .| /|Shift | |Up |
+ * |-----------------------------------------------------------| ,-----------.
+ * |Ctl|Gui|Alt| Space |Alt|Gui|App|Ctl| |Lef|Dow|Rig|
+ * `-----------------------------------------------------------' `-----------'
+ */
+
+ KEYMAP(\
+ ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR, SLCK, BRK, \
+ GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, BSPC, INS, HOME, PGUP, \
+ TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSLS, DEL, END, PGDN, \
+ FN1, A, S, D, F, G, H, J, K, L, SCLN, QUOT, ENT, \
+ LSFT, 0, Z, X, C, V, B, N, M, COMM, DOT, SLSH, RSFT, UP, \
+ LCTL, LGUI, LALT, SPC, RALT, RGUI, APP, RCTL, LEFT, DOWN, RGHT),
+
+
+/*
+ * ,---. ,---------------. ,---------------. ,---------------. ,-----------.
+ * |Esc| |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Slp|
+ * `---' `---------------' `---------------' `---------------' `-----------'
+ * ,-----------------------------------------------------------. ,-----------.
+ * |~ | 1| 2| 3| 4| 5| 6| 7| 8| 9|Mut|V- |V+ |Backsp | |Ins|Hom|PgU|
+ * |-----------------------------------------------------------| |-----------|
+ * |Tab | Q| W| E| R| T| Y| U| I|MSt|Ply|Prv|Nxt|Media| |Del|End|PgD|
+ * |-----------------------------------------------------------| `-----------'
+ * |FN1 | A| S| D| F| G| H| J| K| L| ;| '|Return |
+ * |-----------------------------------------------------------| ,---.
+ * |Shft | Z| X|Clc| V| B| N| M| ,| .| /|Caps | |Up |
+ * |-----------------------------------------------------------| ,-----------.
+ * |Ctl|Gui|Alt| Space |Alt|Gui|App|Ctl| |Lef|Dow|Rig|
+ * `-----------------------------------------------------------' `-----------'
+ */
+
+ KEYMAP(\
+ ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR, SLCK, SLEP, \
+ GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9,MUTE, VOLD, VOLU, BSPC, INS, HOME, PGUP, \
+ TAB, Q, W, E, R, T, Y, U, I,MSTP,MPLY, MPRV, MNXT, MSEL, DEL, END, PGDN, \
+ FN1, A, S, D, F, G, H, J, K, L, SCLN, QUOT, ENT, \
+ LSFT, NO, Z, X,CALC, V, B, N, M, COMM, DOT, SLSH, CAPS, UP, \
+ LCTL, LGUI, LALT, SPC, RALT, RGUI, APP, RCTL, LEFT, DOWN, RGHT),
+
+
+};
+
+
+uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
+{
+ return KEYCODE(layer, row, col);
+}
+
+uint8_t keymap_fn_layer(uint8_t index)
+{
+ return pgm_read_byte(&fn_layer[index]);
+}
+
+uint8_t keymap_fn_keycode(uint8_t index)
+{
+ return pgm_read_byte(&fn_keycode[index]);
+}
diff --git a/keyboard/hid_liber/led.c b/keyboard/hid_liber/led.c
new file mode 100644
index 000000000..e577424c5
--- /dev/null
+++ b/keyboard/hid_liber/led.c
@@ -0,0 +1,34 @@
+/*
+Copyright 2012 Jun Wako
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see .
+*/
+
+#include
+#include "stdint.h"
+#include "led.h"
+
+
+void led_set(uint8_t usb_led)
+{
+ if (usb_led & (1<
+ *
+ * This is heavily based on hid_liber/board.{c|h}.
+ * https://github.com/BathroomEpiphanies/AVR-Keyboard
+ *
+ * Copyright (c) 2012 Fredrik Atmer, Bathroom Epiphanies Inc
+ * http://bathroomepiphanies.com
+ *
+ * As for liscensing consult with the original files or its author.
+ */
+#include
+#include
+#include
+#include
+#include "print.h"
+#include "debug.h"
+#include "util.h"
+#include "matrix.h"
+
+
+#ifndef DEBOUNCE
+# define DEBOUNCE 0
+#endif
+static uint8_t debouncing = DEBOUNCE;
+
+// bit array of key state(1:on, 0:off)
+static matrix_row_t *matrix;
+static matrix_row_t *matrix_debounced;
+static matrix_row_t _matrix0[MATRIX_ROWS];
+static matrix_row_t _matrix1[MATRIX_ROWS];
+
+
+#define _DDRA (uint8_t *const)&DDRA
+#define _DDRB (uint8_t *const)&DDRB
+#define _DDRC (uint8_t *const)&DDRC
+#define _DDRD (uint8_t *const)&DDRD
+#define _DDRE (uint8_t *const)&DDRE
+#define _DDRF (uint8_t *const)&DDRF
+
+#define _PINA (uint8_t *const)&PINA
+#define _PINB (uint8_t *const)&PINB
+#define _PINC (uint8_t *const)&PINC
+#define _PIND (uint8_t *const)&PIND
+#define _PINE (uint8_t *const)&PINE
+#define _PINF (uint8_t *const)&PINF
+
+#define _PORTA (uint8_t *const)&PORTA
+#define _PORTB (uint8_t *const)&PORTB
+#define _PORTC (uint8_t *const)&PORTC
+#define _PORTD (uint8_t *const)&PORTD
+#define _PORTE (uint8_t *const)&PORTE
+#define _PORTF (uint8_t *const)&PORTF
+
+#define _BIT0 0x01
+#define _BIT1 0x02
+#define _BIT2 0x04
+#define _BIT3 0x08
+#define _BIT4 0x10
+#define _BIT5 0x20
+#define _BIT6 0x40
+#define _BIT7 0x80
+
+/* Specifies the ports and pin numbers for the rows */
+static
+uint8_t *const row_ddr[MATRIX_ROWS] = {
+ _DDRB, _DDRB,
+ _DDRC, _DDRC,
+ _DDRD, _DDRD, _DDRD, _DDRD, _DDRD, _DDRD, _DDRD, _DDRD,
+ _DDRF, _DDRF, _DDRF, _DDRF, _DDRF, _DDRF};
+
+static
+uint8_t *const row_port[MATRIX_ROWS] = {
+ _PORTB, _PORTB,
+ _PORTC, _PORTC,
+ _PORTD, _PORTD, _PORTD, _PORTD, _PORTD, _PORTD, _PORTD, _PORTD,
+ _PORTF, _PORTF, _PORTF, _PORTF, _PORTF, _PORTF};
+
+static
+uint8_t *const row_pin[MATRIX_ROWS] = {
+ _PINB, _PINB,
+ _PINC, _PINC,
+ _PIND, _PIND, _PIND, _PIND, _PIND, _PIND, _PIND, _PIND,
+ _PINF, _PINF, _PINF, _PINF, _PINF, _PINF};
+
+static
+const uint8_t row_bit[MATRIX_ROWS] = {
+ _BIT4, _BIT7,
+ _BIT6, _BIT7,
+ _BIT0, _BIT1, _BIT2, _BIT3, _BIT4, _BIT5, _BIT6, _BIT7,
+ _BIT0, _BIT1, _BIT4, _BIT5, _BIT6, _BIT7};
+
+static
+const uint8_t mask = 0x0E;
+
+/* Specifies the ports and pin numbers for the columns */
+static
+const uint8_t col_bit[MATRIX_COLS] = { 0x00, 0x02, 0x04, 0x06, 0x08, 0x0A, 0x0C, 0x0E};
+
+static
+inline void pull_column(int col) {
+ PORTB = col_bit[col] | (PORTB & ~mask);
+}
+
+static
+inline void release_column(int col) {
+}
+
+/* PORTB is set as input with pull-up resistors
+ PORTC,D,E,F are set to high output */
+static
+void setup_io_pins(void) {
+ uint8_t row;
+ DDRB |= 0x0E;
+ PORTB &= ~0x0E;
+ for(row = 0; row < MATRIX_ROWS; row++) {
+ *row_ddr[row] &= ~row_bit[row];
+ *row_port[row] &= ~row_bit[row];
+ }
+}
+
+static
+void setup_leds(void) {
+ DDRB |= 0x60;
+ PORTB |= 0x60;
+}
+
+
+inline
+uint8_t matrix_rows(void)
+{
+ return MATRIX_ROWS;
+}
+
+inline
+uint8_t matrix_cols(void)
+{
+ return MATRIX_COLS;
+}
+
+void matrix_init(void)
+{
+ // To use PORTF disable JTAG with writing JTD bit twice within four cycles.
+ MCUCR |= (1<