diff --git a/keyboards/s60-x-rgb/config.h b/keyboards/s60-x-rgb/config.h
deleted file mode 100644
index 1b98a51d6..000000000
--- a/keyboards/s60-x-rgb/config.h
+++ /dev/null
@@ -1,58 +0,0 @@
-#ifndef CONFIG_H
-#define CONFIG_H
-
-#include "config_common.h"
-
-/* USB Device descriptor parameter */
-#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x6060
-#define DEVICE_VER 0x0001
-#define MANUFACTURER Massdrop
-#define PRODUCT S60-X RGB
-#define DESCRIPTION q.m.k. keyboard firmware for S60-X RGB
-
-/* key matrix size */
-#define MATRIX_ROWS 5
-#define MATRIX_COLS 15
-
-/* key matrix pins */
-#define MATRIX_ROW_PINS { B5, B4, D7, D6, D4 }
-#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, B6, C6, C7, F1, F0, E6, B3, B2, B1, B0 }
-#define UNUSED_PINS
-
-/* COL2ROW or ROW2COL */
-#define DIODE_DIRECTION COL2ROW
-
-/* number of backlight levels */
-#define BACKLIGHT_PIN B7
-#ifdef BACKLIGHT_PIN
-#define BACKLIGHT_LEVELS 3
-#endif
-
-/* Set 0 if debouncing isn't needed */
-#define DEBOUNCING_DELAY 5
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* key combination for command */
-#define IS_COMMAND() ( \
- keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/* prevent stuck modifiers */
-#define PREVENT_STUCK_MODIFIERS
-
-#define RGB_DI_PIN F6
-#ifdef RGB_DI_PIN
-#define RGBLIGHT_ANIMATIONS
-#define RGBLED_NUM 10
-#define RGBLIGHT_HUE_STEP 8
-#define RGBLIGHT_SAT_STEP 8
-#define RGBLIGHT_VAL_STEP 8
-#endif
-
-#endif
\ No newline at end of file
diff --git a/keyboards/s60-x-rgb/keymaps/default/keymap.c b/keyboards/s60-x-rgb/keymaps/default/keymap.c
deleted file mode 100644
index 303f07638..000000000
--- a/keyboards/s60-x-rgb/keymaps/default/keymap.c
+++ /dev/null
@@ -1,48 +0,0 @@
-#include "s60-x-rgb.h"
-
-/* 0: Main layer
-┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
-│ ESC │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BKSPC│
-├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
-│ TAB │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │█████│
-├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
-│CAPSL│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │▒▒▒▒▒│ENTER│█████│
-├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
-│LSHFT│▒▒▒▒▒│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │▒▒▒▒▒│RSHFT│▒▒▒▒▒│
-├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
-│LCTRL│L_GUI│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│ FN0 │ APP │RCTRL│█████│
-└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
-*/
-
-const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
- /* 0: ANSI qwerty */
- LEGACY_KEYMAP(ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, NO, BSPC, \
- TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC, RBRC, BSLS, \
- CAPS, A, S, D, F, G, H, J, K, L, SCLN, QUOT, NO, ENT , \
- LSFT, NO, Z, X, C, V, B, N, M, COMM, DOT, SLSH, NO, RSFT, NO, \
- LCTL, LGUI, LALT, SPC, RALT, FN0, APP, RCTL),
-
-/* 1: Fn layer
-┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
-│GRAVE│ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │▒▒▒▒▒│ │
-├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
-│ │ │ Up │ │ │ │ │ │PGUP │PGDWN│PRTSC│SCLCK│PAUSE│ │█████│
-├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
-│ │Left │Down │Right│ │ │ │ │ │ │ │ │▒▒▒▒▒│ │█████│
-├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
-│ │▒▒▒▒▒│ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │▒▒▒▒▒│
-├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
-│ │ │ │█████│█████│█████│ │█████│█████│█████│ │ │ │ │█████│
-└─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
-*/
- LEGACY_KEYMAP(
- GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, TRNS, TRNS, \
- TRNS, TRNS, UP, TRNS, TRNS, TRNS, TRNS, TRNS, PGUP, PGDN, PSCR, SLCK, PAUS, TRNS, \
- TRNS, LEFT, DOWN, RGHT, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \
- TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, \
- TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS, TRNS),
-};
-
-const uint16_t PROGMEM fn_actions[] = {
- [0] = ACTION_LAYER_MOMENTARY(1), // to Fn overlay
-};
diff --git a/keyboards/s60-x-rgb/keymaps/default/readme.md b/keyboards/s60-x-rgb/keymaps/default/readme.md
deleted file mode 100644
index 01cda9df9..000000000
--- a/keyboards/s60-x-rgb/keymaps/default/readme.md
+++ /dev/null
@@ -1,27 +0,0 @@
-### 1 Standard - ANSI
-The standard keymap is the one that is pre-flashed on the S60-X.
-
-#### 1.0 Default layer
- ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
- │ ESC │ 1 │ 2 │ 3 │ 4 │ 5 │ 6 │ 7 │ 8 │ 9 │ 0 │ - │ = │▒▒▒▒▒│BKSPC│
- ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
- │ TAB │ Q │ W │ E │ R │ T │ Y │ U │ I │ O │ P │ [ │ ] │ \ │█████│
- ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
- │CAPSL│ A │ S │ D │ F │ G │ H │ J │ K │ L │ ; │ ' │▒▒▒▒▒│ENTER│█████│
- ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
- │LSHFT│▒▒▒▒▒│ Z │ X │ C │ V │ B │ N │ M │ , │ . │ / │▒▒▒▒▒│RSHFT│▒▒▒▒▒│
- ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
- │LCTRL│L_GUI│L_ALT│█████│█████│█████│ SPC │█████│█████│█████│R_ALT│ FN0 │ APP │RCTRL│█████│
- └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
-#### 1.1 Fn layer
- ┌─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┬─────┐
- │GRAVE│ F1 │ F2 │ F3 │ F4 │ F5 │ F6 │ F7 │ F8 │ F9 │ F10 │ F11 │ F12 │▒▒▒▒▒│ │
- ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
- │ │ │ Up │ │ │ │ │ │PGUP │PGDWN│PRTSC│SCLCK│PAUSE│ │█████│
- ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
- │ │Left │Down │Right│ │ │ │ │ │ │ │ │▒▒▒▒▒│ │█████│
- ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
- │ │▒▒▒▒▒│ │ │ │ │ │ │ │ │ │ │▒▒▒▒▒│ │▒▒▒▒▒│
- ├─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┼─────┤
- │ │ │ │█████│█████│█████│ │█████│█████│█████│ │ │ │ │█████│
- └─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┴─────┘
diff --git a/keyboards/s60-x-rgb/s60-x-rgb.c b/keyboards/s60-x-rgb/s60-x-rgb.c
deleted file mode 100644
index 39d3a70e8..000000000
--- a/keyboards/s60-x-rgb/s60-x-rgb.c
+++ /dev/null
@@ -1 +0,0 @@
-#include "s60-x-rgb.h"
diff --git a/keyboards/s60-x/Makefile b/keyboards/s60-x/Makefile
index 4e2a6f00f..879e493a2 100644
--- a/keyboards/s60-x/Makefile
+++ b/keyboards/s60-x/Makefile
@@ -1,3 +1,5 @@
+SUBPROJECT_DEFAULT = default
+
ifndef MAKEFILE_INCLUDED
include ../../Makefile
endif
\ No newline at end of file
diff --git a/keyboards/s60-x/config.h b/keyboards/s60-x/config.h
index ac7951c24..8e7bc78be 100644
--- a/keyboards/s60-x/config.h
+++ b/keyboards/s60-x/config.h
@@ -27,138 +27,20 @@ along with this program. If not, see .
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
#define MANUFACTURER Massdrop
-#define PRODUCT S60-X
-#define DESCRIPTION q.m.k. keyboard firmware for S60-X
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 15
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- * ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
-*/
-#define MATRIX_ROW_PINS { B7, B3, B2, B1, B0 }
-#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, E6, F1 }
-#define UNUSED_PINS { F0 }
-
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
-
-// #define BACKLIGHT_PIN B7
-// #define BACKLIGHT_BREATHING
-// #define BACKLIGHT_LEVELS 3
-
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCING_DELAY 5
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
-/* number of backlight levels */
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Magic Key Options
- *
- * Magic keys are hotkey commands that allow control over firmware functions of
- * the keyboard. They are best used in combination with the HID Listen program,
- * found here: https://www.pjrc.com/teensy/hid_listen.html
- *
- * The options below allow the magic key functionality to be changed. This is
- * useful if your keyboard/keypad is missing keys and you want magic key support.
- *
- */
-
-/* key combination for magic key command */
+/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
-/* control how magic key switches layers */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
-
-/* override magic key keymap */
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
-//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
-//#define MAGIC_KEY_HELP1 H
-//#define MAGIC_KEY_HELP2 SLASH
-//#define MAGIC_KEY_DEBUG D
-//#define MAGIC_KEY_DEBUG_MATRIX X
-//#define MAGIC_KEY_DEBUG_KBD K
-//#define MAGIC_KEY_DEBUG_MOUSE M
-//#define MAGIC_KEY_VERSION V
-//#define MAGIC_KEY_STATUS S
-//#define MAGIC_KEY_CONSOLE C
-//#define MAGIC_KEY_LAYER0_ALT1 ESC
-//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
-//#define MAGIC_KEY_LAYER0 0
-//#define MAGIC_KEY_LAYER1 1
-//#define MAGIC_KEY_LAYER2 2
-//#define MAGIC_KEY_LAYER3 3
-//#define MAGIC_KEY_LAYER4 4
-//#define MAGIC_KEY_LAYER5 5
-//#define MAGIC_KEY_LAYER6 6
-//#define MAGIC_KEY_LAYER7 7
-//#define MAGIC_KEY_LAYER8 8
-//#define MAGIC_KEY_LAYER9 9
-//#define MAGIC_KEY_BOOTLOADER PAUSE
-//#define MAGIC_KEY_LOCK CAPS
-//#define MAGIC_KEY_EEPROM E
-//#define MAGIC_KEY_NKRO N
-//#define MAGIC_KEY_SLEEP_LED Z
-
-/*
- * Feature disable options
- * These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-#define NO_ACTION_ONESHOT
-#define NO_ACTION_MACRO
-#define NO_ACTION_FUNCTION
-
#endif
diff --git a/keyboards/s60-x/default/Makefile b/keyboards/s60-x/default/Makefile
new file mode 100644
index 000000000..191c6bb66
--- /dev/null
+++ b/keyboards/s60-x/default/Makefile
@@ -0,0 +1,3 @@
+ifndef MAKEFILE_INCLUDED
+ include ../../../Makefile
+endif
\ No newline at end of file
diff --git a/keyboards/s60-x/default/config.h b/keyboards/s60-x/default/config.h
new file mode 100644
index 000000000..436c6fa8b
--- /dev/null
+++ b/keyboards/s60-x/default/config.h
@@ -0,0 +1,25 @@
+#ifndef DEFAULT_CONFIG_H
+#define DEFAULT_CONFIG_H
+
+#include "../config.h"
+
+#define PRODUCT S60-X
+#define DESCRIPTION q.m.k. keyboard firmware for S60-X
+
+#define MATRIX_ROW_PINS { B7, B3, B2, B1, B0 }
+#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, B5, B6, C6, C7, E6, F1 }
+#define UNUSED_PINS { F0 }
+
+#define LOCKING_SUPPORT_ENABLE
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for magic key command */
+#define IS_COMMAND() ( \
+ keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+)
+
+#define NO_ACTION_ONESHOT
+#define NO_ACTION_MACRO
+#define NO_ACTION_FUNCTION
+
+#endif
diff --git a/keyboards/s60-x/default/default.c b/keyboards/s60-x/default/default.c
new file mode 100644
index 000000000..253f5495c
--- /dev/null
+++ b/keyboards/s60-x/default/default.c
@@ -0,0 +1,28 @@
+#include "default.h"
+
+void matrix_init_kb(void) {
+ // put your keyboard start-up code here
+ // runs once when the firmware starts up
+
+ matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+ // put your looping keyboard code here
+ // runs every cycle (a lot)
+
+ matrix_scan_user();
+}
+
+bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
+ // put your per-action keyboard code here
+ // runs for every action, just before processing by the firmware
+
+ return process_record_user(keycode, record);
+}
+
+void led_set_kb(uint8_t usb_led) {
+ // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
+
+ led_set_user(usb_led);
+}
diff --git a/keyboards/s60-x/default/default.h b/keyboards/s60-x/default/default.h
new file mode 100644
index 000000000..86233ef7e
--- /dev/null
+++ b/keyboards/s60-x/default/default.h
@@ -0,0 +1,69 @@
+/*
+Copyright 2012,2013 Jun Wako
+Copyright 2015 Vin�cius Nery Cordeiro
+Copyright 2016 Felix Uhl
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program. If not, see .
+*/
+
+#ifndef DEFAULT_H
+#define DEFAULT_H
+
+#include "quantum.h"
+
+#ifdef __INTELLISENSE__
+#define PROGMEM
+#include "../config.h"
+#endif
+
+/* S60-X keymap definition macro
+* K31 is the extra key next to short left ISO shift
+* K2C is the moved key next to enter on ISO boards
+* K3C is the extra key next to short right JIS shift
+* K0D is extra key from split backspace
+* K3E is extra key from HHKB-style split right shift
+*/
+
+#define KEYMAP( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
+ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
+ K40, K41, K42, K46, K4A, K4B, K4C, K4D \
+) { \
+ { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \
+ { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO }, \
+ { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, KC_NO }, \
+ { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \
+ { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, KC_NO } \
+}
+
+/*This special definition is used for S60-X keymaps that were ported from TMK
+ * QMK has a lot of keycodes that don't start with KC_, so using the regular KEYMAP macro is recommended
+ */
+#define LEGACY_KEYMAP( \
+ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
+ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
+ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
+ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
+ K40, K41, K42, K46, K4A, K4B, K4C, K4D \
+) { \
+ { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E }, \
+ { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_NO }, \
+ { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_NO }, \
+ { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E }, \
+ { KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_NO, KC_##K46, KC_NO, KC_NO, KC_NO, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_NO } \
+}
+
+#endif
\ No newline at end of file
diff --git a/keyboards/s60-x/default/rules.mk b/keyboards/s60-x/default/rules.mk
new file mode 100644
index 000000000..b8ff76260
--- /dev/null
+++ b/keyboards/s60-x/default/rules.mk
@@ -0,0 +1 @@
+RGBLIGHT_ENABLE ?= no
\ No newline at end of file
diff --git a/keyboards/s60-x-rgb/keymaps/dbroqua/keymap.c b/keyboards/s60-x/keymaps/dbroqua/keymap.c
similarity index 99%
rename from keyboards/s60-x-rgb/keymaps/dbroqua/keymap.c
rename to keyboards/s60-x/keymaps/dbroqua/keymap.c
index 210e28462..940119e52 100644
--- a/keyboards/s60-x-rgb/keymaps/dbroqua/keymap.c
+++ b/keyboards/s60-x/keymaps/dbroqua/keymap.c
@@ -1,4 +1,4 @@
-#include "s60-x-rgb.h"
+#include "s60-x.h"
#define _DEFAULT 0
#define _FN 1
diff --git a/keyboards/s60-x-rgb/Makefile b/keyboards/s60-x/rgb/Makefile
similarity index 53%
rename from keyboards/s60-x-rgb/Makefile
rename to keyboards/s60-x/rgb/Makefile
index 57b2ef62e..bd09e5885 100644
--- a/keyboards/s60-x-rgb/Makefile
+++ b/keyboards/s60-x/rgb/Makefile
@@ -1,3 +1,3 @@
ifndef MAKEFILE_INCLUDED
- include ../../Makefile
+ include ../../../Makefile
endif
diff --git a/keyboards/s60-x/rgb/config.h b/keyboards/s60-x/rgb/config.h
new file mode 100644
index 000000000..26b246e57
--- /dev/null
+++ b/keyboards/s60-x/rgb/config.h
@@ -0,0 +1,31 @@
+#ifndef RBG_CONFIG_H
+#define RBG_CONFIG_H
+
+#include "../config.h"
+
+#define PRODUCT S60-X-RGB
+#define DESCRIPTION q.m.k. keyboard firmware for S60-X RGB
+
+/* key matrix pins */
+#define MATRIX_ROW_PINS { B5, B4, D7, D6, D4 }
+#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, B6, C6, C7, F1, F0, E6, B3, B2, B1, B0 }
+
+/* number of backlight levels */
+#define BACKLIGHT_PIN B7
+#ifdef BACKLIGHT_PIN
+#define BACKLIGHT_LEVELS 3
+#endif
+
+/* prevent stuck modifiers */
+#define PREVENT_STUCK_MODIFIERS
+
+#define RGB_DI_PIN F6
+#ifdef RGB_DI_PIN
+#define RGBLIGHT_ANIMATIONS
+#define RGBLED_NUM 10
+#define RGBLIGHT_HUE_STEP 8
+#define RGBLIGHT_SAT_STEP 8
+#define RGBLIGHT_VAL_STEP 8
+#endif
+
+#endif
\ No newline at end of file
diff --git a/keyboards/s60-x/rgb/rgb.c b/keyboards/s60-x/rgb/rgb.c
new file mode 100644
index 000000000..0117e14ae
--- /dev/null
+++ b/keyboards/s60-x/rgb/rgb.c
@@ -0,0 +1 @@
+#include "rgb.h"
diff --git a/keyboards/s60-x-rgb/s60-x-rgb.h b/keyboards/s60-x/rgb/rgb.h
similarity index 100%
rename from keyboards/s60-x-rgb/s60-x-rgb.h
rename to keyboards/s60-x/rgb/rgb.h
diff --git a/keyboards/s60-x-rgb/rules.mk b/keyboards/s60-x/rgb/rules.mk
similarity index 100%
rename from keyboards/s60-x-rgb/rules.mk
rename to keyboards/s60-x/rgb/rules.mk
diff --git a/keyboards/s60-x/s60-x.c b/keyboards/s60-x/s60-x.c
index 417358140..f031dd770 100644
--- a/keyboards/s60-x/s60-x.c
+++ b/keyboards/s60-x/s60-x.c
@@ -1,28 +1 @@
-#include "s60-x.h"
-
-void matrix_init_kb(void) {
- // put your keyboard start-up code here
- // runs once when the firmware starts up
-
- matrix_init_user();
-}
-
-void matrix_scan_kb(void) {
- // put your looping keyboard code here
- // runs every cycle (a lot)
-
- matrix_scan_user();
-}
-
-bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
- // put your per-action keyboard code here
- // runs for every action, just before processing by the firmware
-
- return process_record_user(keycode, record);
-}
-
-void led_set_kb(uint8_t usb_led) {
- // put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
-
- led_set_user(usb_led);
-}
+#include "s60-x.h"
\ No newline at end of file
diff --git a/keyboards/s60-x/s60-x.h b/keyboards/s60-x/s60-x.h
index 29a2a27b2..5bf8cfcef 100644
--- a/keyboards/s60-x/s60-x.h
+++ b/keyboards/s60-x/s60-x.h
@@ -1,69 +1,13 @@
-/*
-Copyright 2012,2013 Jun Wako
-Copyright 2015 Vincius Nery Cordeiro
-Copyright 2016 Felix Uhl
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program. If not, see .
-*/
-
#ifndef S60X_H
#define S60X_H
+#ifdef SUBPROJECT_default
+ #include "default.h"
+#endif
+#ifdef SUBPROJECT_rgb
+ #include "rgb.h"
+#endif
+
#include "quantum.h"
-#ifdef __INTELLISENSE__
-#define PROGMEM
-#include "config.h"
-#endif
-
-/* S60-X keymap definition macro
-* K31 is the extra key next to short left ISO shift
-* K2C is the moved key next to enter on ISO boards
-* K3C is the extra key next to short right JIS shift
-* K0D is extra key from split backspace
-* K3E is extra key from HHKB-style split right shift
-*/
-
-#define KEYMAP( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
- K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
- K40, K41, K42, K46, K4A, K4B, K4C, K4D \
-) { \
- { K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \
- { K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, KC_NO }, \
- { K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, KC_NO }, \
- { K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \
- { K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, KC_NO, KC_NO, K4A, K4B, K4C, K4D, KC_NO } \
-}
-
-/*This special definition is used for S60-X keymaps that were ported from TMK
- * QMK has a lot of keycodes that don't start with KC_, so using the regular KEYMAP macro is recommended
- */
-#define LEGACY_KEYMAP( \
- K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, \
- K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, \
- K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, K2D, \
- K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
- K40, K41, K42, K46, K4A, K4B, K4C, K4D \
-) { \
- { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07, KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E }, \
- { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17, KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_NO }, \
- { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27, KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_NO }, \
- { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37, KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E }, \
- { KC_##K40, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_NO, KC_##K46, KC_NO, KC_NO, KC_NO, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_NO } \
-}
-
#endif